Skip to content

Instantly share code, notes, and snippets.

@kuon

kuon/gist:77eaa59b78ee3ab0173b986a4c09d102

Created September 10, 2018 23:43
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save kuon/77eaa59b78ee3ab0173b986a4c09d102 to your computer and use it in GitHub Desktop.
Save kuon/77eaa59b78ee3ab0173b986a4c09d102 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt
[ 0.000000] Linux version 4.18.6-arch1-1-ARCH (builduser@heftig-4211) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Wed Sep 5 11:54:09 UTC 2018
[ 0.000000] Command line: \\vmlinuz-linux zfs=zroot/ROOT/default rw threadirqs zfs.zfs_arc_max=5368709120 nvidia-drm.modeset=1 initrd=\initramfs-linux.img
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbfb5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbfb6000-0x00000000cbfbcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cbfbd000-0x00000000cc41cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc41d000-0x00000000cc895fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc896000-0x00000000ddb67fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddb68000-0x00000000ddd75fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddd76000-0x00000000ddd93fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ddd94000-0x00000000de2bcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de2bd000-0x00000000deffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xc9d1f018-0xc9d3f057] usable ==> usable
[ 0.000000] e820: update [mem 0xc9d1f018-0xc9d3f057] usable ==> usable
[ 0.000000] e820: update [mem 0xc9d0d018-0xc9d1e057] usable ==> usable
[ 0.000000] e820: update [mem 0xc9d0d018-0xc9d1e057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c9d0d017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9d0d018-0x00000000c9d1e057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9d1e058-0x00000000c9d1f017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9d1f018-0x00000000c9d3f057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9d3f058-0x00000000cbfb5fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cbfb6000-0x00000000cbfbcfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cbfbd000-0x00000000cc41cfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cc41d000-0x00000000cc895fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cc896000-0x00000000ddb67fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ddb68000-0x00000000ddd75fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ddd76000-0x00000000ddd93fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000ddd94000-0x00000000de2bcfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000de2bd000-0x00000000deffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000081effffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ESRT=0xdef55818 ACPI 2.0=0xddd7c000 ACPI=0xddd7c000 SMBIOS=0xf04d0 MPS=0xfd5c0
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/MAXIMUS VII HERO, BIOS 3503 04/18/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x81f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0800000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0810000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0818000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 081C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 081E000000 mask 7FFF000000 write-back
[ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 32752M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [(____ptrval____)]
[ 0.000000] esrt: Reserving ESRT space from 0x00000000def55818 to 0x00000000def55850.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x2c1277000, 0x2c1277fff] PGTABLE
[ 0.000000] BRK [0x2c1278000, 0x2c1278fff] PGTABLE
[ 0.000000] BRK [0x2c1279000, 0x2c1279fff] PGTABLE
[ 0.000000] BRK [0x2c127a000, 0x2c127afff] PGTABLE
[ 0.000000] BRK [0x2c127b000, 0x2c127bfff] PGTABLE
[ 0.000000] BRK [0x2c127c000, 0x2c127cfff] PGTABLE
[ 0.000000] BRK [0x2c127d000, 0x2c127dfff] PGTABLE
[ 0.000000] BRK [0x2c127e000, 0x2c127efff] PGTABLE
[ 0.000000] BRK [0x2c127f000, 0x2c127ffff] PGTABLE
[ 0.000000] BRK [0x2c1280000, 0x2c1280fff] PGTABLE
[ 0.000000] BRK [0x2c1281000, 0x2c1281fff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x7eca4000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DDD7C000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DDD7C088 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DDD8B650 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DDD7C1A0 00F4AC (v02 ALASKA A M I 00000011 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DE2BCF80 000040
[ 0.000000] ACPI: APIC 0x00000000DDD8B760 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DDD8B7F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DDD8B840 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DDD8C4C0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DDD8CA00 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000DDD8D578 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DDD8D5B8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DDD8D5F0 000495 (v01 IdeRef IdeTable 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DDD8DA88 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000DDD934A0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: UEFI 0x00000000DDD93458 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x81effc000-0x81effffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000081effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cbfb5fff]
[ 0.000000] node 0: [mem 0x00000000cbfbd000-0x00000000cc41cfff]
[ 0.000000] node 0: [mem 0x00000000cc896000-0x00000000ddb67fff]
[ 0.000000] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000081effffff]
[ 0.000000] Reserved but unavailable: 10618 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081effffff]
[ 0.000000] On node 0 totalpages: 8373894
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14108 pages used for memmap
[ 0.000000] DMA32 zone: 902889 pages, LIFO batch:31
[ 0.000000] Normal zone: 116672 pages used for memmap
[ 0.000000] Normal zone: 7467008 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] efi_bgrt: Ignoring BGRT: invalid image address
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9d0d000-0xc9d0dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9d1e000-0xc9d1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9d1f000-0xc9d1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9d3f000-0xc9d3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbfb6000-0xcbfbcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc41d000-0xcc895fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddb68000-0xddd75fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddd76000-0xddd93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddd94000-0xde2bcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde2bd000-0xdeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8243026
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: \\vmlinuz-linux zfs=zroot/ROOT/default rw threadirqs zfs.zfs_arc_max=5368709120 nvidia-drm.modeset=1 initrd=\initramfs-linux.img
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32629836K/33495576K available (10252K kernel code, 1298K rwdata, 3524K rodata, 1488K init, 612K bss, 865740K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 33427 entries in 131 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 3997.905 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x734144325de, max_idle_ns: 881590923120 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.96 BogoMIPS (lpj=13326350)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.024242] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.025924] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.025989] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.026042] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.026193] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.026194] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.026197] mce: CPU supports 9 MCE banks
[ 0.026203] CPU0: Thermal monitoring enabled (TM1)
[ 0.026211] process: using mwait in idle threads
[ 0.026213] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.026214] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.026215] Spectre V2 : Mitigation: Full generic retpoline
[ 0.026215] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.026215] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.026216] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.026216] Speculative Store Bypass: Vulnerable
[ 0.028572] Freeing SMP alternatives memory: 28K
[ 0.035098] TSC deadline timer enabled
[ 0.035100] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.053337] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.053360] ... version: 3
[ 0.053360] ... bit width: 48
[ 0.053361] ... generic registers: 4
[ 0.053361] ... value mask: 0000ffffffffffff
[ 0.053362] ... max period: 00007fffffffffff
[ 0.053362] ... fixed-purpose events: 3
[ 0.053362] ... event mask: 000000070000000f
[ 0.060002] Hierarchical SRCU implementation.
[ 0.080146] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.086668] smp: Bringing up secondary CPUs ...
[ 0.126676] x86: Booting SMP configuration:
[ 0.126676] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.366959] smp: Brought up 1 node, 8 CPUs
[ 0.366959] smpboot: Max logical packages: 1
[ 0.366959] smpboot: Total of 8 processors activated (63992.75 BogoMIPS)
[ 0.370510] devtmpfs: initialized
[ 0.370510] x86/mm: Memory block size: 128MB
[ 0.371338] PM: Registering ACPI NVS region [mem 0xcbfb6000-0xcbfbcfff] (28672 bytes)
[ 0.371338] PM: Registering ACPI NVS region [mem 0xddd94000-0xde2bcfff] (5410816 bytes)
[ 0.371338] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.371338] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.371338] pinctrl core: initialized pinctrl subsystem
[ 0.371338] RTC time: 23:30:19, date: 09/10/18
[ 0.371338] NET: Registered protocol family 16
[ 0.371338] audit: initializing netlink subsys (disabled)
[ 0.371338] audit: type=2000 audit(1536622218.369:1): state=initialized audit_enabled=0 res=1
[ 0.373341] cpuidle: using governor ladder
[ 0.373343] cpuidle: using governor menu
[ 0.373370] ACPI: bus type PCI registered
[ 0.373371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.373412] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.373413] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.373419] PCI: Using configuration type 1 for base access
[ 0.373432] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.374062] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.374062] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.374062] ACPI: Added _OSI(Module Device)
[ 0.374062] ACPI: Added _OSI(Processor Device)
[ 0.374062] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.374062] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.374062] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.382521] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.386918] ACPI: Dynamic OEM Table Load:
[ 0.386922] ACPI: SSDT 0xFFFF9432FAA76000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.390005] ACPI: EC: EC started
[ 0.390005] ACPI: EC: interrupt blocked
[ 0.390005] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.390005] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.390005] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.390005] ACPI: Interpreter enabled
[ 0.390005] ACPI: (supports S0 S3 S4 S5)
[ 0.390005] ACPI: Using IOAPIC for interrupt routing
[ 0.390005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.390005] ACPI: Enabled 10 GPEs in block 00 to 3F
[ 0.390674] ACPI: Power Resource [PG00] (on)
[ 0.390904] ACPI: Power Resource [PG01] (on)
[ 0.391123] ACPI: Power Resource [PG02] (on)
[ 0.395172] ACPI: Power Resource [FN00] (off)
[ 0.395224] ACPI: Power Resource [FN01] (off)
[ 0.395273] ACPI: Power Resource [FN02] (off)
[ 0.395324] ACPI: Power Resource [FN03] (off)
[ 0.395376] ACPI: Power Resource [FN04] (off)
[ 0.396275] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.396279] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.396478] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.396607] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.397171] PCI host bridge to bus 0000:00
[ 0.397172] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.397173] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.397174] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.397175] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.397175] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.397176] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.397177] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.397178] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.397179] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.397184] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.397250] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.397276] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.397383] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.397399] pci 0000:00:14.0: reg 0x10: [mem 0xf7420000-0xf742ffff 64bit]
[ 0.397446] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.397501] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.397517] pci 0000:00:16.0: reg 0x10: [mem 0xf7439000-0xf743900f 64bit]
[ 0.397567] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.397638] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[ 0.397652] pci 0000:00:19.0: reg 0x10: [mem 0xf7400000-0xf741ffff]
[ 0.397658] pci 0000:00:19.0: reg 0x14: [mem 0xf7437000-0xf7437fff]
[ 0.397664] pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
[ 0.397709] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.397766] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.397783] pci 0000:00:1a.0: reg 0x10: [mem 0xf7436000-0xf74363ff]
[ 0.397849] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.397907] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.397921] pci 0000:00:1b.0: reg 0x10: [mem 0xf7430000-0xf7433fff 64bit]
[ 0.397968] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.398036] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.398092] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.398183] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[ 0.398240] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.398329] pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
[ 0.398386] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.398479] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.398496] pci 0000:00:1d.0: reg 0x10: [mem 0xf7435000-0xf74353ff]
[ 0.398563] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.398623] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.398760] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.398774] pci 0000:00:1f.3: reg 0x10: [mem 0xf7434000-0xf74340ff 64bit]
[ 0.398789] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.398875] pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000
[ 0.398891] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.398899] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.398908] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.398913] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.398919] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.398930] pci 0000:01:00.0: BAR 3: assigned to efifb
[ 0.399006] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[ 0.399018] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.399118] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
[ 0.413346] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.413348] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.413349] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.413351] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.413417] acpiphp: Slot [1] registered
[ 0.413420] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.413486] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
[ 0.413508] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.413517] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.413526] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.413535] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.413545] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.413554] pci 0000:03:00.0: reg 0x24: [mem 0xf7300000-0xf73001ff]
[ 0.413694] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.413697] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.413699] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.413768] pci 0000:04:00.0: [104c:823e] type 01 class 0x060400
[ 0.413804] pci 0000:04:00.0: reg 0x14: [mem 0xf7200000-0xf7200fff]
[ 0.413891] pci 0000:04:00.0: supports D1 D2
[ 0.413983] pci 0000:00:1c.4: PCI bridge to [bus 04-05]
[ 0.413986] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf72fffff]
[ 0.414034] pci_bus 0000:05: extended config space not accessible
[ 0.414052] pci 0000:05:00.0: [104c:823f] type 00 class 0x0c0010
[ 0.414072] pci 0000:05:00.0: reg 0x10: [mem 0xf7104000-0xf71047ff]
[ 0.414081] pci 0000:05:00.0: reg 0x14: [mem 0xf7100000-0xf7103fff]
[ 0.414165] pci 0000:05:00.0: supports D1 D2
[ 0.414166] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.414246] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.414256] pci 0000:04:00.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.414758] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.414803] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.414846] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.414889] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.414931] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.414974] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.415016] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.415059] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.415314] ACPI: EC: interrupt unblocked
[ 0.415319] ACPI: EC: event unblocked
[ 0.415323] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.415323] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.415361] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.415361] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.415361] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.415361] vgaarb: loaded
[ 0.415361] pps_core: LinuxPPS API ver. 1 registered
[ 0.415361] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.415361] PTP clock support registered
[ 0.415361] EDAC MC: Ver: 3.0.0
[ 0.415361] Registered efivars operations
[ 0.416678] PCI: Using ACPI for IRQ routing
[ 0.417782] PCI: pci_cache_line_size set to 64 bytes
[ 0.417824] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.417825] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.417826] e820: reserve RAM buffer [mem 0xc9d0d018-0xcbffffff]
[ 0.417826] e820: reserve RAM buffer [mem 0xc9d1f018-0xcbffffff]
[ 0.417827] e820: reserve RAM buffer [mem 0xcbfb6000-0xcbffffff]
[ 0.417827] e820: reserve RAM buffer [mem 0xcc41d000-0xcfffffff]
[ 0.417828] e820: reserve RAM buffer [mem 0xddb68000-0xdfffffff]
[ 0.417829] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.417830] e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff]
[ 0.417883] NetLabel: Initializing
[ 0.417884] NetLabel: domain hash size = 128
[ 0.417884] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.417892] NetLabel: unlabeled traffic allowed by default
[ 0.417894] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.417894] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.421015] clocksource: Switched to clocksource tsc-early
[ 0.426683] VFS: Disk quotas dquot_6.6.0
[ 0.426693] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.426729] pnp: PnP ACPI init
[ 0.426808] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.426811] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.426888] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.426891] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.426903] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.426927] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.426929] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.427002] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.427003] system 00:04: [io 0x02a0-0x02af] has been reserved
[ 0.427004] system 00:04: [io 0x0a00-0x0aff] has been reserved
[ 0.427006] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.427044] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.427046] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.427268] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.427269] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.427270] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.427271] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.427272] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.427273] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.427274] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.427275] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.427276] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.427277] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.427278] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.427279] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.427281] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.427424] pnp: PnP ACPI: found 7 devices
[ 0.432616] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.432646] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.432647] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.432649] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.432651] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.432653] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.432660] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.432662] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.432664] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.432670] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.432675] pci 0000:04:00.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.432685] pci 0000:00:1c.4: PCI bridge to [bus 04-05]
[ 0.432688] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf72fffff]
[ 0.432693] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.432694] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.432695] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.432696] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.432697] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.432697] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.432698] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.432699] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[ 0.432700] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.432701] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.432702] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.432703] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.432703] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.432704] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf72fffff]
[ 0.432705] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.432788] NET: Registered protocol family 2
[ 0.432874] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.432940] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.433145] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.433237] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.433266] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.433323] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.433404] NET: Registered protocol family 1
[ 0.433407] NET: Registered protocol family 44
[ 0.456739] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c6 took 22646 usecs
[ 0.476727] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c6 took 19508 usecs
[ 0.476740] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.476744] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 0.476777] PCI: CLS 64 bytes, default 64
[ 0.476800] Unpacking initramfs...
[ 0.633627] Freeing initrd memory: 19820K
[ 0.633632] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.633634] software IO TLB [mem 0xc5d0a000-0xc9d0a000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 0.633743] Scanning for low memory corruption every 60 seconds
[ 0.634086] Initialise system trusted keyrings
[ 0.634092] Key type blacklist registered
[ 0.634127] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.634790] zbud: loaded
[ 0.634954] pstore: using lz4hc compression
[ 0.635518] Key type asymmetric registered
[ 0.635519] Asymmetric key parser 'x509' registered
[ 0.635540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.635562] io scheduler noop registered
[ 0.635563] io scheduler deadline registered
[ 0.635586] io scheduler cfq registered (default)
[ 0.635587] io scheduler mq-deadline registered
[ 0.635588] io scheduler kyber registered
[ 0.635599] io scheduler bfq registered
[ 0.636070] shpchp 0000:04:00.0: Cannot get control of SHPC hotplug
[ 0.636074] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.636111] efifb: probing for efifb
[ 0.636121] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[ 0.636122] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.636122] efifb: scrolling: redraw
[ 0.636123] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.637231] Console: switching to colour frame buffer device 128x48
[ 0.638281] fb0: EFI VGA frame buffer device
[ 0.638286] intel_idle: MWAIT substates: 0x42120
[ 0.638287] intel_idle: v0.4.1 model 0x3C
[ 0.638460] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.638502] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.638507] ACPI: Power Button [PWRB]
[ 0.638530] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.638538] ACPI: Power Button [PWRF]
[ 0.639294] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.639295] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.639477] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.639478] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.639584] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.640279] rtc_cmos 00:02: RTC can wake from S4
[ 0.640416] rtc_cmos 00:02: registered as rtc0
[ 0.640424] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.640451] intel_pstate: Intel P-state driver initializing
[ 0.640904] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.641584] NET: Registered protocol family 10
[ 0.651594] Segment Routing with IPv6
[ 0.651645] NET: Registered protocol family 17
[ 0.652801] RAS: Correctable Errors collector initialized.
[ 0.652889] microcode: sig=0x306c3, pf=0x2, revision=0x24
[ 0.653110] microcode: Microcode Update Driver: v2.2.
[ 0.653134] sched_clock: Marking stable (653093629, 0)->(655629120, -2535491)
[ 0.653498] registered taskstats version 1
[ 0.653509] Loading compiled-in X.509 certificates
[ 0.653526] zswap: loaded using pool lzo/zbud
[ 0.656465] Key type big_key registered
[ 0.657128] Magic number: 2:688:554
[ 0.657138] clockevents clockevent5: hash matches
[ 0.657157] acpi PNP0C0F:05: hash matches
[ 0.657172] acpi PNP0C01:00: hash matches
[ 0.657239] rtc_cmos 00:02: setting system clock to 2018-09-10 23:30:19 UTC (1536622219)
[ 0.779333] Freeing unused kernel image memory: 1488K
[ 0.779357] Write protecting the kernel read-only data: 16384k
[ 0.780289] Freeing unused kernel image memory: 2016K
[ 0.780368] Freeing unused kernel image memory: 572K
[ 0.799311] ipmi message handler version 39.2
[ 0.799539] ipmi device interface
[ 0.803231] nvidia: loading out-of-tree module taints kernel.
[ 0.803238] nvidia: module license 'NVIDIA' taints kernel.
[ 0.803238] Disabling lock debugging due to kernel taint
[ 0.813485] nvidia-nvlink: Nvlink Core is being initialized, major device number 242
[ 0.813757] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 0.813824] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.54 Tue Aug 14 19:02:34 PDT 2018 (using threaded interrupts)
[ 0.815481] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.54 Tue Aug 14 23:08:44 PDT 2018
[ 0.821667] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241
[ 0.822065] Linux agpgart interface v0.103
[ 0.829368] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 1.215924] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 1.216032] caller _nv001112rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
[ 1.650026] tsc: Refined TSC clocksource calibration: 3997.682 MHz
[ 1.650030] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x733f9e9e4e4, max_idle_ns: 881590812519 ns
[ 1.650047] clocksource: Switched to clocksource tsc
[ 2.015086] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.015087] [drm] No driver support for vblank timestamp query.
[ 2.071253] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 2.117014] ACPI: bus type USB registered
[ 2.117027] usbcore: registered new interface driver usbfs
[ 2.117031] usbcore: registered new interface driver hub
[ 2.117049] usbcore: registered new device driver usb
[ 2.118436] SCSI subsystem initialized
[ 2.118439] firewire_ohci 0000:05:00.0: enabling device (0000 -> 0002)
[ 2.118569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.119692] ehci-pci: EHCI PCI platform driver
[ 2.119827] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.119831] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.119840] ehci-pci 0000:00:1a.0: debug port 2
[ 2.121699] libata version 3.00 loaded.
[ 2.122474] ahci 0000:03:00.0: version 3.0
[ 2.122582] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[ 2.122625] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.122627] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 2.122816] scsi host0: ahci
[ 2.122896] scsi host1: ahci
[ 2.122921] ata1: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300100 irq 25
[ 2.122923] ata2: SATA max UDMA/133 abar m512@0xf7300000 port 0xf7300180 irq 25
[ 2.123733] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.123758] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7436000
[ 2.136701] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.136743] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 2.136744] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.136745] usb usb1: Product: EHCI Host Controller
[ 2.136746] usb usb1: Manufacturer: Linux 4.18.6-arch1-1-ARCH ehci_hcd
[ 2.136747] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.136850] hub 1-0:1.0: USB hub found
[ 2.136855] hub 1-0:1.0: 2 ports detected
[ 2.136995] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.137001] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.138098] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 2.138103] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.138285] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 2.138286] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.138287] usb usb2: Product: xHCI Host Controller
[ 2.138287] usb usb2: Manufacturer: Linux 4.18.6-arch1-1-ARCH xhci-hcd
[ 2.138288] usb usb2: SerialNumber: 0000:00:14.0
[ 2.138362] hub 2-0:1.0: USB hub found
[ 2.138395] hub 2-0:1.0: 14 ports detected
[ 2.138870] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.138875] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 2.138897] ehci-pci 0000:00:1d.0: debug port 2
[ 2.138904] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.138906] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.138908] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.138935] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 2.138936] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.138937] usb usb4: Product: xHCI Host Controller
[ 2.138937] usb usb4: Manufacturer: Linux 4.18.6-arch1-1-ARCH xhci-hcd
[ 2.138938] usb usb4: SerialNumber: 0000:00:14.0
[ 2.138998] hub 4-0:1.0: USB hub found
[ 2.139019] hub 4-0:1.0: 6 ports detected
[ 2.142810] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.142850] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7435000
[ 2.153362] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.153399] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 2.153401] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.153402] usb usb3: Product: EHCI Host Controller
[ 2.153403] usb usb3: Manufacturer: Linux 4.18.6-arch1-1-ARCH ehci_hcd
[ 2.153404] usb usb3: SerialNumber: 0000:00:1d.0
[ 2.153496] hub 3-0:1.0: USB hub found
[ 2.153500] hub 3-0:1.0: 2 ports detected
[ 2.176756] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x2
[ 2.176807] firewire_ohci 0000:05:00.0: isochronous cycle inconsistent
[ 2.359654] random: fast init done
[ 2.466693] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[ 2.466698] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.483360] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.593390] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.593691] ata1.00: ATA-9: TOSHIBA THNSNJ512GDNU, JUGB0101, max UDMA/100
[ 2.593693] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.594478] ata1.00: configured for UDMA/100
[ 2.594631] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNJ51 0101 PQ: 0 ANSI: 5
[ 2.607828] usb 2-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01
[ 2.607830] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.607832] usb 2-2: Product: USB2.0 Hub
[ 2.608507] hub 2-2:1.0: USB hub found
[ 2.608755] hub 2-2:1.0: 4 ports detected
[ 2.613710] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[ 2.613712] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.613980] hub 1-1:1.0: USB hub found
[ 2.614070] hub 1-1:1.0: 6 ports detected
[ 2.630460] usb 3-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[ 2.630462] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.630911] hub 3-1:1.0: USB hub found
[ 2.631098] hub 3-1:1.0: 8 ports detected
[ 2.690138] firewire_core 0000:05:00.0: created device fw0: GUID 0001b71300004fd8, S800
[ 2.733369] usb 2-3: new full-speed USB device number 3 using xhci_hcd
[ 2.758812] firewire_core 0000:05:00.0: created device fw1: GUID 00130e0401c05cbc, S400
[ 2.760593] firewire_core 0000:05:00.0: phy config: new root=ffc1, gap_count=5
[ 2.906627] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.908700] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.908714] sd 0:0:0:0: [sda] Write Protect is off
[ 2.908717] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.908739] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.909987] sda: sda1 sda2
[ 2.910369] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.930827] SPL: Loaded module v0.7.10-1
[ 2.946706] usb 2-2.4: new high-speed USB device number 4 using xhci_hcd
[ 3.101456] usb 2-2.4: New USB device found, idVendor=2109, idProduct=2812, bcdDevice=90.90
[ 3.101458] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.101459] usb 2-2.4: Product: USB2.0 Hub
[ 3.101460] usb 2-2.4: Manufacturer: VIA Labs, Inc.
[ 3.102085] hub 2-2.4:1.0: USB hub found
[ 3.102216] hub 2-2.4:1.0: 4 ports detected
[ 3.443355] usb 2-2.4.1: new high-speed USB device number 5 using xhci_hcd
[ 3.544824] usb 2-2.4.1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice=90.90
[ 3.544825] usb 2-2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.544826] usb 2-2.4.1: Product: USB2.0 Hub
[ 3.544826] usb 2-2.4.1: Manufacturer: VIA Labs, Inc.
[ 3.545494] hub 2-2.4.1:1.0: USB hub found
[ 3.545673] hub 2-2.4.1:1.0: 4 ports detected
[ 3.840022] usb 2-2.4.1.1: new full-speed USB device number 6 using xhci_hcd
[ 3.941665] usb 2-2.4.1.1: New USB device found, idVendor=2184, idProduct=0030, bcdDevice= 1.00
[ 3.941666] usb 2-2.4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.941667] usb 2-2.4.1.1: Product: GDM834X VCP PORT
[ 3.941668] usb 2-2.4.1.1: Manufacturer: Silicon Labs
[ 3.941669] usb 2-2.4.1.1: SerialNumber: GES817002
[ 4.033355] usb 2-2.4.1.2: new full-speed USB device number 7 using xhci_hcd
[ 4.135032] usb 2-2.4.1.2: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[ 4.135033] usb 2-2.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.135034] usb 2-2.4.1.2: Product: CP2104 USB to UART Bridge Controller
[ 4.135035] usb 2-2.4.1.2: Manufacturer: Silicon Labs
[ 4.135035] usb 2-2.4.1.2: SerialNumber: 012E2BB6
[ 4.857538] ZFS: Loaded module v0.7.10-1, ZFS pool version 5000, ZFS filesystem version 5
[ 5.293725] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 5.310334] systemd[1]: Detected architecture x86-64.
[ 5.314160] systemd[1]: Set hostname to <yoda>.
[ 5.396095] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.396204] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.396328] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.396398] systemd[1]: Listening on Journal Socket.
[ 5.396481] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.398498] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.398561] systemd[1]: Reached target ZFS startup target.
[ 5.398613] systemd[1]: Reached target Login Prompts.
[ 5.398791] systemd[1]: Created slice User and Session Slice.
[ 5.399195] systemd[1]: Listening on udev Kernel Socket.
[ 5.415097] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.432503] vboxdrv: Found 8 processor cores
[ 5.450138] vboxdrv: TSC mode is Invariant, tentative frequency 3997677082 Hz
[ 5.450139] vboxdrv: Successfully loaded version 5.2.18 (interface 0x00290001)
[ 5.451728] systemd-journald[866]: Received request to flush runtime journal from PID 1
[ 5.451784] VBoxPciLinuxInit
[ 5.451786] vboxpci: IOMMU not found (not registered)
[ 5.452595] VBoxNetAdp: Successfully started.
[ 5.454052] VBoxNetFlt: Successfully started.
[ 5.562781] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 5.562861] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.577267] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.577268] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.577422] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 5.607047] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 5.607277] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 5.607278] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.607279] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.607279] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.607280] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.618714] cryptd: max_cpu_qlen set to 1000
[ 5.620380] iTCO_vendor_support: vendor-support=0
[ 5.621079] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.621115] iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
[ 5.621195] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.622654] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 5.623296] AVX2 version of gcm_enc/dec engaged.
[ 5.623297] AES CTR mode by8 optimization enabled
[ 5.631118] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 5.631169] asus_wmi: ASUS WMI generic driver loaded
[ 5.631443] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.631450] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.632830] asus_wmi: Initialization: 0x0
[ 5.632863] asus_wmi: BIOS WMI version: 0.9
[ 5.632924] asus_wmi: SFUN value: 0x0
[ 5.633502] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
[ 5.633616] asus_wmi: Number of fans: 1
[ 5.652845] snd_hda_codec_realtek hdaudioC1D0: ALC1150: SKU not ready 0x00000000
[ 5.653368] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 5.653369] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.653371] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.653371] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 5.653372] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 5.653373] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 5.653375] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 5.653376] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 5.653377] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 5.665986] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[ 5.666856] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[ 5.666897] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 5.666934] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 5.666971] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 5.667011] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 5.667050] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 5.667087] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 5.667123] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 5.671875] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 5.689236] intel_rapl: Found RAPL domain package
[ 5.689238] intel_rapl: Found RAPL domain core
[ 5.689239] intel_rapl: Found RAPL domain dram
[ 5.751931] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:79:59:8e:15:69
[ 5.751938] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 5.751962] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 5.753132] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 5.916503] 8021q: 802.1Q VLAN Support v1.8
[ 5.944654] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.946009] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.946036] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.946037] cfg80211: failed to load regulatory.db
[ 6.170200] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 7.943376] usb 2-3: unable to read config index 0 descriptor/all
[ 7.943767] usb 2-3: can't read configurations, error -110
[ 8.066688] usb 2-3: new full-speed USB device number 8 using xhci_hcd
[ 8.250394] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input13
[ 8.250424] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[ 8.250451] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[ 8.250478] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[ 9.338665] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9.338692] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 9.978741] FS-Cache: Loaded
[ 9.979632] Key type dns_resolver registered
[ 10.012957] FS-Cache: Netfs 'cifs' registered for caching
[ 10.013010] Key type cifs.spnego registered
[ 10.013012] Key type cifs.idmap registered
[ 10.013570] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[ 10.013629] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[ 10.013661] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[ 10.013662] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[ 10.013704] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[ 10.013948] No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
[ 10.015620] FS-Cache: Duplicate cookie detected
[ 10.016163] FS-Cache: O-cookie c=(____ptrval____) [p=(____ptrval____) fl=222 nc=0 na=1]
[ 10.016716] FS-Cache: O-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.017254] FS-Cache: O-key=[8] '020001bdac10d80a'
[ 10.017788] FS-Cache: N-cookie c=(____ptrval____) [p=(____ptrval____) fl=2 nc=0 na=1]
[ 10.018331] FS-Cache: N-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.018866] FS-Cache: N-key=[8] '020001bdac10d80a'
[ 10.019403] FS-Cache: Duplicate cookie detected
[ 10.019946] FS-Cache: O-cookie c=(____ptrval____) [p=(____ptrval____) fl=222 nc=0 na=1]
[ 10.020505] FS-Cache: O-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.021052] FS-Cache: O-key=[8] '020001bdac10d80a'
[ 10.021599] FS-Cache: N-cookie c=(____ptrval____) [p=(____ptrval____) fl=2 nc=0 na=1]
[ 10.022156] FS-Cache: N-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.022705] FS-Cache: N-key=[8] '020001bdac10d80a'
[ 10.023254] FS-Cache: Duplicate cookie detected
[ 10.023598] FS-Cache: O-cookie c=(____ptrval____) [p=(____ptrval____) fl=222 nc=0 na=1]
[ 10.023936] FS-Cache: O-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.024262] FS-Cache: O-key=[8] '020001bdac10d80a'
[ 10.024589] FS-Cache: N-cookie c=(____ptrval____) [p=(____ptrval____) fl=2 nc=0 na=1]
[ 10.024975] FS-Cache: N-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.025309] FS-Cache: N-key=[8] '020001bdac10d80a'
[ 10.025717] FS-Cache: Duplicate cookie detected
[ 10.026048] FS-Cache: O-cookie c=(____ptrval____) [p=(____ptrval____) fl=222 nc=0 na=1]
[ 10.026391] FS-Cache: O-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.026915] FS-Cache: O-key=[8] '020001bdac10d80a'
[ 10.027507] FS-Cache: N-cookie c=(____ptrval____) [p=(____ptrval____) fl=2 nc=0 na=1]
[ 10.028121] FS-Cache: N-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.028505] FS-Cache: N-key=[8] '020001bdac10d80a'
[ 10.028877] FS-Cache: Duplicate cookie detected
[ 10.029351] FS-Cache: O-cookie c=(____ptrval____) [p=(____ptrval____) fl=222 nc=0 na=1]
[ 10.029711] FS-Cache: O-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.030069] FS-Cache: O-key=[8] '020001bdac10d80a'
[ 10.030434] FS-Cache: N-cookie c=(____ptrval____) [p=(____ptrval____) fl=2 nc=0 na=1]
[ 10.030917] FS-Cache: N-cookie d=(____ptrval____) n=(____ptrval____)
[ 10.031479] FS-Cache: N-key=[8] '020001bdac10d80a'
[ 10.043144] CIFS VFS: error -95 on ioctl to get interface list
[ 10.043830] CIFS VFS: error -95 on ioctl to get interface list
[ 10.044452] CIFS VFS: error -95 on ioctl to get interface list
[ 10.044866] CIFS VFS: error -95 on ioctl to get interface list
[ 10.045035] CIFS VFS: error -95 on ioctl to get interface list
[ 10.045043] CIFS VFS: error -95 on ioctl to get interface list
[ 13.174660] audit: type=1006 audit(1536622232.012:2): pid=2202 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
[ 13.276705] usb 2-3: unable to read config index 0 descriptor/all
[ 13.276708] usb 2-3: can't read configurations, error -110
[ 13.276735] usb usb2-port3: attempt power cycle
[ 13.358501] fuse init (API version 7.27)
[ 13.923349] usb 2-3: new full-speed USB device number 9 using xhci_hcd
[ 19.036702] usb 2-3: unable to read config index 0 descriptor/all
[ 19.036705] usb 2-3: can't read configurations, error -110
[ 19.160007] usb 2-3: new full-speed USB device number 10 using xhci_hcd
[ 24.370020] usb 2-3: unable to read config index 0 descriptor/all
[ 24.370024] usb 2-3: can't read configurations, error -110
[ 24.370048] usb usb2-port3: unable to enumerate USB device
[ 24.493332] usb 2-6: new full-speed USB device number 11 using xhci_hcd
[ 24.636169] usb 2-6: New USB device found, idVendor=056a, idProduct=0084, bcdDevice= 1.11
[ 24.636171] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 24.636172] usb 2-6: Product: Wacom Wireless Receiver
[ 24.636172] usb 2-6: Manufacturer: Wacom Co.,Ltd.
[ 24.759998] usb 2-12: new low-speed USB device number 12 using xhci_hcd
[ 24.904126] usb 2-12: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01
[ 24.904128] usb 2-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 24.904129] usb 2-12: Product: USB Laser Mouse
[ 24.904129] usb 2-12: Manufacturer: Logitech
[ 25.026664] usb 2-14: new high-speed USB device number 13 using xhci_hcd
[ 25.167245] usb 2-14: New USB device found, idVendor=0411, idProduct=01b8, bcdDevice= 0.01
[ 25.167246] usb 2-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 25.167247] usb 2-14: Product: BUFFALO Optical Drive
[ 25.167248] usb 2-14: Manufacturer: BUFFALO
[ 25.167249] usb 2-14: SerialNumber: 0000010207AA
[ 25.192893] usb-storage 2-14:1.0: USB Mass Storage device detected
[ 25.193065] scsi host2: usb-storage 2-14:1.0
[ 25.193133] usbcore: registered new interface driver usb-storage
[ 25.194119] hidraw: raw HID events driver (C) Jiri Kosina
[ 25.197670] usbcore: registered new interface driver usbserial_generic
[ 25.197676] usbserial: USB Serial support registered for generic
[ 25.199032] usbcore: registered new interface driver cp210x
[ 25.199038] usbserial: USB Serial support registered for cp210x
[ 25.199050] cp210x 2-2.4.1.2:1.0: cp210x converter detected
[ 25.199953] usb 2-2.4.1.2: cp210x converter now attached to ttyUSB0
[ 25.201329] cp210x 2-2.4.1.1:1.0: cp210x converter detected
[ 25.202361] usbcore: registered new interface driver usbhid
[ 25.202362] usbhid: USB HID core driver
[ 25.203260] usb 2-2.4.1.1: cp210x converter now attached to ttyUSB1
[ 25.204327] hid-generic 0003:056A:0084.0001: hidraw0: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:14.0-6/input0
[ 25.204401] hid-generic 0003:056A:0084.0002: hiddev0,hidraw1: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:14.0-6/input1
[ 25.204458] hid-generic 0003:056A:0084.0003: hiddev1,hidraw2: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:14.0-6/input2
[ 25.204537] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.0/0003:046D:C069.0004/input/input17
[ 25.204581] hid-generic 0003:046D:C069.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-12/input0
[ 25.208139] mousedev: PS/2 mouse device common for all mice
[ 25.208657] wacom 0003:056A:0084.0001: hidraw0: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:14.0-6/input0
[ 25.263610] wacom 0003:056A:0084.0002: hidraw1: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:14.0-6/input1
[ 25.263808] wacom 0003:056A:0084.0003: hidraw2: USB HID v1.00 Device [Wacom Co.,Ltd. Wacom Wireless Receiver] on usb-0000:00:14.0-6/input2
[ 26.215762] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS48 1.00 PQ: 0 ANSI: 0
[ 26.215937] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 26.255971] sr 2:0:0:0: Power-on or device reset occurred
[ 26.316450] sr 2:0:0:0: [sr0] scsi3-mmc drive: 0x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 26.316451] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 26.316526] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 26.557120] random: crng init done
[ 26.557121] random: 7 urandom warning(s) missed due to ratelimiting
[ 51.763288] usb 2-3: new full-speed USB device number 14 using xhci_hcd
[ 57.009964] usb 2-3: unable to read config index 0 descriptor/all
[ 57.009967] usb 2-3: can't read configurations, error -110
[ 57.133278] usb 2-3: new full-speed USB device number 15 using xhci_hcd
[ 62.343293] usb 2-3: unable to read config index 0 descriptor/all
[ 62.343296] usb 2-3: can't read configurations, error -110
[ 62.343326] usb usb2-port3: attempt power cycle
[ 62.986602] usb 2-3: new full-speed USB device number 16 using xhci_hcd
[ 68.103273] usb 2-3: unable to read config index 0 descriptor/all
[ 68.103276] usb 2-3: can't read configurations, error -110
[ 68.226594] usb 2-3: new full-speed USB device number 17 using xhci_hcd
[ 73.436611] usb 2-3: unable to read config index 0 descriptor/all
[ 73.436615] usb 2-3: can't read configurations, error -110
[ 73.436642] usb usb2-port3: unable to enumerate USB device
[ 86.716565] usb 2-4: new high-speed USB device number 18 using xhci_hcd
[ 86.864798] usb 2-4: New USB device found, idVendor=05ac, idProduct=1006, bcdDevice=96.15
[ 86.864800] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 86.864800] usb 2-4: Product: Keyboard Hub
[ 86.864801] usb 2-4: Manufacturer: Apple, Inc.
[ 86.864802] usb 2-4: SerialNumber: 000000000000
[ 86.865619] hub 2-4:1.0: USB hub found
[ 86.865640] hub 2-4:1.0: 3 ports detected
[ 86.868210] usb 2-4: USB disconnect, device number 18
[ 87.156574] usb 2-4: new high-speed USB device number 19 using xhci_hcd
[ 87.304799] usb 2-4: New USB device found, idVendor=05ac, idProduct=1006, bcdDevice=96.15
[ 87.304801] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 87.304802] usb 2-4: Product: Keyboard Hub
[ 87.304802] usb 2-4: Manufacturer: Apple, Inc.
[ 87.304803] usb 2-4: SerialNumber: 000000000000
[ 87.305600] hub 2-4:1.0: USB hub found
[ 87.305617] hub 2-4:1.0: 3 ports detected
[ 87.586564] usb 2-4.2: new low-speed USB device number 20 using xhci_hcd
[ 87.682820] usb 2-4.2: New USB device found, idVendor=05ac, idProduct=0221, bcdDevice= 0.71
[ 87.682822] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 87.682823] usb 2-4.2: Product: Apple Keyboard
[ 87.682825] usb 2-4.2: Manufacturer: Apple, Inc
[ 87.703369] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/2-4.2:1.0/0003:05AC:0221.0005/input/input27
[ 87.759962] apple 0003:05AC:0221.0005: input,hidraw4: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:14.0-4.2/input0
[ 87.760054] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/2-4.2:1.1/0003:05AC:0221.0006/input/input28
[ 87.816676] apple 0003:05AC:0221.0006: input,hidraw5: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:14.0-4.2/input1
[ 101.933780] audit: type=1006 audit(1536622320.772:3): pid=2356 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 101.945197] audit: type=1006 audit(1536622320.782:4): pid=3422 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 101.977933] systemd-journald[866]: Failed to set ACL on /var/log/journal/b20570e1eb354484842cd3f69b841431/user-1000.journal, ignoring: Operation not supported
[ 354.412143] usb 2-3: new full-speed USB device number 21 using xhci_hcd
[ 359.661051] usb 2-3: unable to read config index 0 descriptor/all
[ 359.661054] usb 2-3: can't read configurations, error -110
[ 359.787668] usb 2-3: new full-speed USB device number 22 using xhci_hcd
[ 364.993464] usb 2-3: unable to read config index 0 descriptor/all
[ 364.993467] usb 2-3: can't read configurations, error -110
[ 364.993492] usb usb2-port3: attempt power cycle
[ 365.643293] usb 2-3: new full-speed USB device number 23 using xhci_hcd
[ 370.752540] usb 2-3: unable to read config index 0 descriptor/all
[ 370.752543] usb 2-3: can't read configurations, error -110
[ 370.879173] usb 2-3: new full-speed USB device number 24 using xhci_hcd
[ 376.085203] usb 2-3: unable to read config index 0 descriptor/all
[ 376.085206] usb 2-3: can't read configurations, error -110
[ 376.085234] usb usb2-port3: unable to enumerate USB device
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment