| /* This is an experimental script which I used to successfully clear the "Service High Voltage Charging System" message which can occur due to a loss of isolation. | |
| * Previously I had to pay frequently to access the expensive SPS programming system to clear this code whilst attempting to resolve the underlying cause. | |
| * This script was generated by a tool I developed to analyse J2534 log files. | |
| * This could work for other cars but I can't comment on success. Please do not run this unless you understand the consequences! | |
| * I intend to convert to a version that will work with ELM327 once I learn how these work. | |
| * The program requires the J2534-Sharp library as a dependency. | |
| * https://github.com/BrianHumlicek/J2534-Sharp | |
| */ | |
| using System; | |
| using System.Linq; |
| [gcode_macro PA_CAL] | |
| # Klipper pressure advance line calibration macro. | |
| # Usage: PA_CAL BED=100 NOZZLE=240 PA_START=0.0 PA_STOP=0.1 NZL=0.4 | |
| # Or you can execute with no parameters, which will use values from printer.cfg and saved_variables.cfg. | |
| # First prints a line with current set PA, then prints 21 additional line segments starting with PA_START, and increasing to PA_STOP. | |
| # Based on http://realdeuce.github.io/Voron/PA/pressure_advance.html | |
| # Cleaned up and moved to using saved_variables.cfg by u/jibbsisme | |
| # Sourced from u/Deepsiks, assisted by u/imoftendisgruntled, u/scul86, and thanks to u/beansisfat, u/stray_r | |
| description: Tune Pressure Advance |
View Forum Thread (requires login) 
Ever wanted to delete all your likes/favorites from Twitter but only found broken/expensive tools? You are in the right place.
setInterval(() => {
for (const d of document.querySelectorAll('div[data-testid="unlike"]')) {
d.click()
}
| // I did this in Chrome... | |
| // | |
| // Go to https://www.facebook.com/ads/preferences/ | |
| // Click the "Advertisers" section to open it up. | |
| // Click "See more" once | |
| // Before doing anything else, just keep clicking space bar to trigger the "see more" button | |
| // Do this for a bit until all the advertisers are loaded | |
| // then run this below in the dev tools console... | |
| // (It will take a few minutes, depending how many you have, and your browser may lock up, but once it's done you will see it auto clicked the "remove" X in the top right for all of them) |
