Attention: this is the key used to sign the certificate requests, anyone holding this can sign certificates on your behalf. So keep it in a safe place!
openssl genrsa -des3 -out rootCA.key 4096
// I did this in Chrome... | |
// | |
// Go to https://www.facebook.com/ads/preferences/ | |
// Click the "Advertisers" section to open it up. | |
// Click "See more" once | |
// Before doing anything else, just keep clicking space bar to trigger the "see more" button | |
// Do this for a bit until all the advertisers are loaded | |
// then run this below in the dev tools console... | |
// (It will take a few minutes, depending how many you have, and your browser may lock up, but once it's done you will see it auto clicked the "remove" X in the top right for all of them) |
Ever wanted to delete all your likes/favorites from Twitter but only found broken/expensive tools? You are in the right place.
setInterval(() => {
for (const d of document.querySelectorAll('div[data-testid="unlike"]')) {
d.click()
}
View Forum Thread
(requires login) ![image](https://user-images.githubusercontent.com/3326002/211234558-3e83f0b9-486f-4ab5-ae[gcode_macro PA_CAL] | |
# Klipper pressure advance line calibration macro. | |
# Usage: PA_CAL BED=100 NOZZLE=240 PA_START=0.0 PA_STOP=0.1 NZL=0.4 | |
# Or you can execute with no parameters, which will use values from printer.cfg and saved_variables.cfg. | |
# First prints a line with current set PA, then prints 21 additional line segments starting with PA_START, and increasing to PA_STOP. | |
# Based on http://realdeuce.github.io/Voron/PA/pressure_advance.html | |
# Cleaned up and moved to using saved_variables.cfg by u/jibbsisme | |
# Sourced from u/Deepsiks, assisted by u/imoftendisgruntled, u/scul86, and thanks to u/beansisfat, u/stray_r | |
description: Tune Pressure Advance |
/* This is an experimental script which I used to successfully clear the "Service High Voltage Charging System" message which can occur due to a loss of isolation. | |
* Previously I had to pay frequently to access the expensive SPS programming system to clear this code whilst attempting to resolve the underlying cause. | |
* This script was generated by a tool I developed to analyse J2534 log files. | |
* This could work for other cars but I can't comment on success. Please do not run this unless you understand the consequences! | |
* I intend to convert to a version that will work with ELM327 once I learn how these work. | |
* The program requires the J2534-Sharp library as a dependency. | |
* https://github.com/BrianHumlicek/J2534-Sharp | |
*/ | |
using System; | |
using System.Linq; |