logfile

Product name:GeForce RTX 2070
DID:0x1F0710DE - SSID:0x21723842
Disable D3 cold capability before unloading driver...

Disable D3 cold capability successfully on GPU index 0x00.
*** NVFLASH LOG FILE ***
Command-line : --log logfile --savegpuled gpumcu.rom 
NVIDIA Firmware Update Utility patched by Vipeax
Copyright (C) 1993-2018, NVIDIA Corporation. All rights reserved.


Command: savegpuled
FindDevices:
Device:00:00:00=1022:1450:1043:8747
Device:00:00:02=1022:1451:1043:8747
Device:00:01:00=1022:1452:0000:0000
Device:00:01:01=1022:1453:FFFF:FFFF
Device:00:01:03=1022:1453:FFFF:FFFF
Device:00:02:00=1022:1452:0000:0000
Device:00:03:00=1022:1452:0000:0000
Device:00:03:02=1022:1453:FFFF:FFFF
Device:00:04:00=1022:1452:0000:0000
Device:00:07:00=1022:1452:0000:0000
Device:00:07:01=1022:1454:FFFF:FFFF
Device:00:08:00=1022:1452:0000:0000
Device:00:08:01=1022:1454:FFFF:FFFF
Device:00:14:00=1022:790B:1043:8747
Device:00:14:03=1022:790E:1043:8747
Device:00:18:00=1022:1460:0000:0000
Device:00:18:01=1022:1461:0000:0000
Device:00:18:02=1022:1462:0000:0000
Device:00:18:03=1022:1463:0000:0000
Device:00:18:04=1022:1464:0000:0000
Device:00:18:05=1022:1465:0000:0000
Device:00:18:06=1022:1466:0000:0000
Device:00:18:07=1022:1467:0000:0000
Device:01:00:00=126F:2262:126F:2262
Device:02:00:00=1022:43D0:1B21:1142
Device:02:00:01=1022:43C8:1B21:1062
Device:02:00:02=1022:43C6:FFFF:FFFF
Device:03:00:00=1022:43C7:FFFF:FFFF
Device:03:02:00=1022:43C7:FFFF:FFFF
Device:03:03:00=1022:43C7:FFFF:FFFF
Device:03:04:00=1022:43C7:FFFF:FFFF
Device:03:06:00=1022:43C7:FFFF:FFFF
Device:03:07:00=1022:43C7:FFFF:FFFF
Device:03:09:00=1022:43C7:FFFF:FFFF
Device:05:00:00=8086:24F3:8086:0010
Device:07:00:00=1B21:1242:1043:8675
Device:09:00:00=8086:1539:1043:85F0
Device:0B:00:00=10DE:1F07:3842:2172 GPU
Device:0B:00:01=10DE:10F9:3842:2172
Device:0B:00:02=10DE:1ADA:3842:2172
Device:0B:00:03=10DE:1ADB:3842:2172
Device:0C:00:00=1022:145A:1022:145A
Device:0C:00:02=1022:1456:1022:1456
Device:0C:00:03=1022:145F:1043:8747
Device:0D:00:00=1022:1455:1022:1455
Device:0D:00:02=1022:7901:1043:8747
Device:0D:00:03=1022:1457:1043:8733
Device:26:03:00=9800:0005:FFFF:FFFF
Device:26:03:01=9800:0005:FFFF:FFFF

Disable NV driver before start if NV driver loaded.



The NVFlash succeed to disable the NV Driver automatically.
Action: Looking for a specific I2C device in the DCB table.
 loading Falcon uCode ...

Sending PREP command to initialize the SPI contoller after kicked start PMU.
Actual SPI clock frequency (Hz): 18000000
Action: Identify EEPROM.
Serial EEPROM Identify by PMU
EEPROM ID (C2,2534) : MX MX25U8033E-MX25U8035F 1.65-2.0V 8192Kx1S, page
Action: Read EEPROM image.
Reading EEPROM bytes.
Start: 0x00000000
Count: 1048576(0x00100000x
Read complete.
I2C Device Type : 0x91
I2C Slave Address :0x92
I2C Port :01( 31 means UNUSED )
I2C Speed :03
Read I2C Device table from Vbios image in EEPROM completed
Flasher skip to load Pre-OS service in VBIOS on exit.
Graphics Device      (10DE,1F07,3842,2172) H:--:NRM  S:00,B:0B,D:00,F:00
Using I2C port = 0x01, I2C Device Address = 0x92


Changing the MCU mode from BL mode to APP mode.
Failed to issue GmacSetBootModeOverride
Failed to override MCU mode with APP mode at 00 try.
Failed to issue GmacSetBootModeOverride
Failed to override MCU mode with APP mode at 01 try.
Failed to issue GmacSetBootModeOverride
Failed to override MCU mode with APP mode at 02 try.

Failed to switch mode from BL to APP before starting to save image.



Restore the NV driver state automatically, and a reboot is required.

Delete the cached vbios from registry


Restore D3 cold capability after NV driver restoration...

Enable D3 cold capability successfully on GPU index 0x00.
Restore D3 cold capability after 01 try.