my rtorrent configuration file

.rtorrent.rc

# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.

# Sort the main view by name
view.sort_current = main,less=d.get_name=
view.sort_new = main,less=d.get_name=
view.sort = main

# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
#max_peers = 100

# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50

# Maximum number of simultanious uploads per torrent.
#max_uploads = 15

# Maximum number of simultaneous uploads per torrent.
max_uploads = 0

# Max upload and download slots allowed
max_uploads_global = 200
max_downloads_global = 200
max_memory_usage = 512M

# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 500
upload_rate = 40

# Default directory to save the downloaded torrents.
directory = /media/2To_laurent/

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /home/pi/.session

# Watch a directory for new torrents, and stop those that have been
# deleted.
# schedule = watch_directory,5,5,load_start=/media/2To_laurent/*.torrent
# schedule = tied_directory,10,10,start_tied=
schedule = untied_directory,10,10,close_untied=
schedule = watch_directory_1,5,5,"load_start=~/films/*.torrent,d.set_directory=~/films/"
schedule = watch_directory_2,5,5,"load_start=~/series/*.torrent,d.set_directory=~/series/"
schedule = watch_directory_3,5,5,"load_start=~/downloads/*.torrent,d.set_directory=~/downloads/"
# schedule = untied_directory,5,5,stop_untied=

# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
ratio.enable=
ratio.min.set=110
ratio.max.set=110
ratio.upload.set=20M

# Apply 500KB/s down & 20KB/s up at 08:00
# Apply unlimited upload/download at 00:00
schedule = throttle_1,08:30:00,24:00:00,download_rate=500
schedule = throttle_2,08:30:00,24:00:00,upload_rate=40
schedule = throttle_3,00:00:00,24:00:00,download_rate=0
schedule = throttle_4,00:00:00,24:00:00,upload_rate=0

# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no

# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no

# Port range to use for listening.
port_range = 45698-45699

# Start opening ports at a random position within the port range.
#port_random = no

# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no

# Set whether the client should try to connect to UDP trackers.
use_udp_trackers = yes  

# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = require, require_RC4

# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
dht = on

# UDP port to use for DHT.
#
dht_port = 45698

# Enable peer exchange (for torrents not marked private)
#
peer_exchange = yes
use_udp_trackers = yes  

#scgi_port = 127.0.0.1:5000
method.set_key = event.download.erased, rm_torrent,"execute=rm,$d.get_tied_to_file="
method.set_key = event.download.finished,notify_me,"execute=/home/pi/sms.sh,$d.get_name="