-
-
Save lae/dbc8e8c5d1846fe3b910c18e5e51cb2b to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
git clone git://git.proxmox.com/git/pve-qemu.git | |
cd pve-qemu | |
sed -i '/audio-drv-list/ s/alsa/alsa,pa/' debian/rules | |
sudo mk-build-deps -ir | |
make dinstall |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
lae@lilienne:~/build$ git clone git://git.proxmox.com/git/pve-qemu.git | |
Cloning into 'pve-qemu'... | |
remote: Enumerating objects: 2657, done. | |
remote: Counting objects: 100% (2657/2657), done. | |
remote: Compressing objects: 100% (770/770), done. | |
remote: Total 2657 (delta 1874), reused 2657 (delta 1874)s | |
Receiving objects: 100% (2657/2657), 3.25 MiB | 1.58 MiB/s, done. | |
Resolving deltas: 100% (1874/1874), done. | |
lae@lilienne:~/build$ cd pve-qemu | |
lae@lilienne:~/build/pve-qemu$ sed -i '/audio-drv-list/ s/alsa/alsa,pa/' debian/rules | |
lae@lilienne:~/build/pve-qemu$ sudo mk-build-deps -ir | |
dpkg-buildpackage: info: source package pve-qemu-kvm-build-deps | |
dpkg-buildpackage: info: source version 6.0.0-3 | |
dpkg-buildpackage: info: source distribution unstable | |
dpkg-buildpackage: info: source changed by Equivs Dummy Package Generator <root@x> | |
dpkg-buildpackage: info: host architecture amd64 | |
dpkg-source --before-build . | |
debian/rules clean | |
dh clean | |
dh_clean | |
debian/rules binary | |
dh binary | |
dh_update_autotools_config | |
dh_autoreconf | |
create-stamp debian/debhelper-build-stamp | |
dh_prep | |
dh_install | |
dh_installdocs | |
dh_installchangelogs | |
dh_perl | |
dh_link | |
dh_strip_nondeterminism | |
dh_compress | |
dh_fixperms | |
dh_missing | |
dh_installdeb | |
dh_gencontrol | |
dh_md5sums | |
dh_builddeb | |
dpkg-deb: building package 'pve-qemu-kvm-build-deps' in '../pve-qemu-kvm-build-deps_6.0.0-3_all.deb'. | |
dpkg-genbuildinfo --build=binary | |
dpkg-genchanges --build=binary >../pve-qemu-kvm-build-deps_6.0.0-3_amd64.changes | |
dpkg-genchanges: info: binary-only upload (no source code included) | |
dpkg-source --after-build . | |
dpkg-buildpackage: info: binary-only upload (no source included) | |
The package has been created. | |
Attention, the package has been created in the current directory, | |
not in ".." as indicated by the message above! | |
Selecting previously unselected package pve-qemu-kvm-build-deps. | |
(Reading database ... 134806 files and directories currently installed.) | |
Preparing to unpack pve-qemu-kvm-build-deps_6.0.0-3_all.deb ... | |
Unpacking pve-qemu-kvm-build-deps (6.0.0-3) ... | |
Reading package lists... Done | |
Building dependency tree... Done | |
Reading state information... Done | |
Correcting dependencies...Starting pkgProblemResolver with broken count: 0 | |
Starting 2 pkgProblemResolver with broken count: 0 | |
Done | |
Done | |
Starting pkgProblemResolver with broken count: 0 | |
Starting 2 pkgProblemResolver with broken count: 0 | |
Done | |
The following additional packages will be installed: | |
check docutils-common libaio-dev libblkid-dev libcaca-dev libcap-ng-dev libfdt-dev libffi-dev libglib2.0-bin libglib2.0-dev libglib2.0-dev-bin libglu1-mesa libglu1-mesa-dev libiscsi-dev libjemalloc-dev libjs-sphinxdoc | |
libjs-underscore libmount-dev libnuma-dev libpci-dev libpcre16-3 libpcre2-16-0 libpcre2-32-0 libpcre2-dev libpcre2-posix2 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpixman-1-dev libproxmox-backup-qemu0-dev libpulse-dev | |
libpulse-mainloop-glib0 librados-dev librbd-dev libsdl1.2-dev libseccomp-dev libselinux1-dev libsepol1-dev libslang2-dev libspice-protocol-dev libspice-server-dev libsubunit-dev libsubunit0 libsystemd-dev libtext-unidecode-perl | |
liburing-dev libusb-1.0-0-dev libusbredirparser-dev libxext-dev meson python-babel-localedata python3-alabaster python3-babel python3-docutils python3-imagesize python3-pygments python3-roman python3-snowballstemmer | |
python3-sphinx python3-tz quilt sgml-base sphinx-common tex-common texi2html texinfo uuid-dev x11proto-xext-dev xfslibs-dev xml-core | |
Suggested packages: | |
libgirepository1.0-dev libglib2.0-doc libxml2-utils seccomp libxext-doc docutils-doc fonts-linuxlibertine | ttf-linux-libertine texlive-lang-french texlive-latex-base texlive-latex-recommended python-pygments-doc | |
ttf-bitstream-vera python3-stemmer dvipng fonts-freefont-otf imagemagick-6.q16 latexmk libjs-mathjax python3-sphinx-rtd-theme sphinx-doc texlive-fonts-recommended texlive-latex-extra texlive-plain-generic graphviz procmail | |
sgml-base-doc latex2html texlive-base | |
Recommended packages: | |
libusb-1.0-doc libpaper-utils python3-pil | |
The following NEW packages will be installed: | |
check docutils-common libaio-dev libblkid-dev libcaca-dev libcap-ng-dev libfdt-dev libffi-dev libglib2.0-bin libglib2.0-dev libglib2.0-dev-bin libglu1-mesa libglu1-mesa-dev libiscsi-dev libjemalloc-dev libjs-sphinxdoc | |
libjs-underscore libmount-dev libnuma-dev libpci-dev libpcre16-3 libpcre2-16-0 libpcre2-32-0 libpcre2-dev libpcre2-posix2 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpixman-1-dev libproxmox-backup-qemu0-dev libpulse-dev | |
libpulse-mainloop-glib0 librados-dev librbd-dev libsdl1.2-dev libseccomp-dev libselinux1-dev libsepol1-dev libslang2-dev libspice-protocol-dev libspice-server-dev libsubunit-dev libsubunit0 libsystemd-dev libtext-unidecode-perl | |
liburing-dev libusb-1.0-0-dev libusbredirparser-dev libxext-dev meson python-babel-localedata python3-alabaster python3-babel python3-docutils python3-imagesize python3-pygments python3-roman python3-snowballstemmer | |
python3-sphinx python3-tz quilt sgml-base sphinx-common tex-common texi2html texinfo uuid-dev x11proto-xext-dev xfslibs-dev xml-core | |
0 upgraded, 70 newly installed, 0 to remove and 0 not upgraded. | |
1 not fully installed or removed. | |
Need to get 15.0 MB/21.3 MB of archives. | |
After this operation, 103 MB of additional disk space will be used. | |
Do you want to continue? [Y/n] | |
Get:1 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsubunit0 amd64 1.4.0-3 [9,724 B] | |
Get:2 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsubunit-dev amd64 1.4.0-3 [10.7 kB] | |
Get:3 http://dallas.mirrors.linode.com/debian bullseye/main amd64 check amd64 0.15.2-2 [115 kB] | |
Get:4 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libjemalloc-dev amd64 5.2.1-3 [437 kB] | |
Get:5 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpci-dev amd64 1:3.7.0-5 [60.6 kB] | |
Get:6 http://dallas.mirrors.linode.com/debian bullseye/main amd64 librados-dev amd64 14.2.21-1 [106 kB] | |
Get:7 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libslang2-dev amd64 2.3.2-5 [485 kB] | |
Get:8 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libcaca-dev amd64 0.99.beta19-2.2 [893 kB] | |
Get:9 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libglu1-mesa amd64 9.0.1-1 [168 kB] | |
Get:10 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libglu1-mesa-dev amd64 9.0.1-1 [207 kB] | |
Get:11 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpulse-mainloop-glib0 amd64 14.2-2 [42.1 kB] | |
Get:12 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libffi-dev amd64 3.3-6 [56.5 kB] | |
Get:13 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libglib2.0-bin amd64 2.66.8-1 [141 kB] | |
Get:14 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libglib2.0-dev-bin amd64 2.66.8-1 [179 kB] | |
Get:15 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsepol1-dev amd64 3.1-1 [338 kB] | |
Get:16 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre2-16-0 amd64 10.36-2 [231 kB] | |
Get:17 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre2-32-0 amd64 10.36-2 [220 kB] | |
Get:18 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre2-posix2 amd64 10.36-2 [49.1 kB] | |
Get:19 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre2-dev amd64 10.36-2 [731 kB] | |
Get:20 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libselinux1-dev amd64 3.1-3 [168 kB] | |
Get:21 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre16-3 amd64 2:8.39-13 [259 kB] | |
Get:22 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre32-3 amd64 2:8.39-13 [250 kB] | |
Get:23 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcrecpp0v5 amd64 2:8.39-13 [152 kB] | |
Get:24 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libpcre3-dev amd64 2:8.39-13 [650 kB] | |
Get:25 http://dallas.mirrors.linode.com/debian bullseye/main amd64 x11proto-xext-dev all 2020.1-1 [3,404 B] | |
Get:26 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libxext-dev amd64 2:1.3.3-1.1 [107 kB] | |
Get:27 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsdl1.2-dev amd64 1.2.15+dfsg2-6 [730 kB] | |
Get:28 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libsystemd-dev amd64 247.3-6 [401 kB] | |
Get:29 http://dallas.mirrors.linode.com/debian bullseye/main amd64 sphinx-common all 3.4.3-2 [578 kB] | |
Get:30 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-alabaster all 0.7.8-1.1 [18.6 kB] | |
Get:31 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python-babel-localedata all 2.8.0+dfsg.1-7 [4,997 kB] | |
Get:32 http://download.proxmox.com/debian/pve bullseye/pve-no-subscription amd64 libproxmox-backup-qemu0-dev amd64 1.2.0-1 [6,284 B] | |
Get:33 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-tz all 2021.1-1 [34.8 kB] | |
Get:34 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-babel all 2.8.0+dfsg.1-7 [100 kB] | |
Get:35 http://dallas.mirrors.linode.com/debian bullseye/main amd64 sgml-base all 1.30 [15.1 kB] | |
Get:36 http://dallas.mirrors.linode.com/debian bullseye/main amd64 xml-core all 0.18+nmu1 [23.8 kB] | |
Get:37 http://dallas.mirrors.linode.com/debian bullseye/main amd64 docutils-common all 0.16+dfsg-4 [129 kB] | |
Get:38 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-roman all 2.0.0-5 [9,064 B] | |
Get:39 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-docutils all 0.16+dfsg-4 [384 kB] | |
Get:40 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-imagesize all 1.2.0-2 [5,824 B] | |
Get:41 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-pygments all 2.7.1+dfsg-2.1 [657 kB] | |
Get:42 http://dallas.mirrors.linode.com/debian bullseye/main amd64 python3-snowballstemmer all 2.1.0-1 [58.7 kB] | |
Get:43 http://dallas.mirrors.linode.com/debian bullseye/main amd64 quilt all 0.66-2.1 [319 kB] | |
Get:44 http://dallas.mirrors.linode.com/debian bullseye/main amd64 libtext-unidecode-perl all 1.30-1 [103 kB] | |
Get:45 http://dallas.mirrors.linode.com/debian bullseye/main amd64 texi2html all 1.82+dfsg1-6 [356 kB] | |
Get:46 http://dallas.mirrors.linode.com/debian bullseye/main amd64 tex-common all 6.16 [53.7 kB] | |
Fetched 15.0 MB in 1s (18.4 MB/s) | |
Extracting templates from packages: 100% | |
Selecting previously unselected package libsubunit0:amd64. | |
(Reading database ... 134810 files and directories currently installed.) | |
Preparing to unpack .../00-libsubunit0_1.4.0-3_amd64.deb ... | |
Unpacking libsubunit0:amd64 (1.4.0-3) ... | |
Selecting previously unselected package libsubunit-dev:amd64. | |
Preparing to unpack .../01-libsubunit-dev_1.4.0-3_amd64.deb ... | |
Unpacking libsubunit-dev:amd64 (1.4.0-3) ... | |
Selecting previously unselected package check:amd64. | |
Preparing to unpack .../02-check_0.15.2-2_amd64.deb ... | |
Unpacking check:amd64 (0.15.2-2) ... | |
Selecting previously unselected package libaio-dev:amd64. | |
Preparing to unpack .../03-libaio-dev_0.3.112-9_amd64.deb ... | |
Unpacking libaio-dev:amd64 (0.3.112-9) ... | |
Selecting previously unselected package libcap-ng-dev. | |
Preparing to unpack .../04-libcap-ng-dev_0.7.9-2.2+b1_amd64.deb ... | |
Unpacking libcap-ng-dev (0.7.9-2.2+b1) ... | |
Selecting previously unselected package libfdt-dev. | |
Preparing to unpack .../05-libfdt-dev_1.6.0-1_amd64.deb ... | |
Unpacking libfdt-dev (1.6.0-1) ... | |
Selecting previously unselected package libiscsi-dev:amd64. | |
Preparing to unpack .../06-libiscsi-dev_1.19.0-3_amd64.deb ... | |
Unpacking libiscsi-dev:amd64 (1.19.0-3) ... | |
Selecting previously unselected package libjemalloc-dev. | |
Preparing to unpack .../07-libjemalloc-dev_5.2.1-3_amd64.deb ... | |
Unpacking libjemalloc-dev (5.2.1-3) ... | |
Selecting previously unselected package libnuma-dev:amd64. | |
Preparing to unpack .../08-libnuma-dev_2.0.12-1+b1_amd64.deb ... | |
Unpacking libnuma-dev:amd64 (2.0.12-1+b1) ... | |
Selecting previously unselected package libpci-dev:amd64. | |
Preparing to unpack .../09-libpci-dev_1%3a3.7.0-5_amd64.deb ... | |
Unpacking libpci-dev:amd64 (1:3.7.0-5) ... | |
Selecting previously unselected package libpixman-1-dev:amd64. | |
Preparing to unpack .../10-libpixman-1-dev_0.40.0-1_amd64.deb ... | |
Unpacking libpixman-1-dev:amd64 (0.40.0-1) ... | |
Selecting previously unselected package libproxmox-backup-qemu0-dev. | |
Preparing to unpack .../11-libproxmox-backup-qemu0-dev_1.2.0-1_amd64.deb ... | |
Unpacking libproxmox-backup-qemu0-dev (1.2.0-1) ... | |
Selecting previously unselected package librados-dev. | |
Preparing to unpack .../12-librados-dev_14.2.21-1_amd64.deb ... | |
Unpacking librados-dev (14.2.21-1) ... | |
Selecting previously unselected package librbd-dev. | |
Preparing to unpack .../13-librbd-dev_14.2.21-1_amd64.deb ... | |
Unpacking librbd-dev (14.2.21-1) ... | |
Selecting previously unselected package libslang2-dev:amd64. | |
Preparing to unpack .../14-libslang2-dev_2.3.2-5_amd64.deb ... | |
Unpacking libslang2-dev:amd64 (2.3.2-5) ... | |
Selecting previously unselected package libcaca-dev. | |
Preparing to unpack .../15-libcaca-dev_0.99.beta19-2.2_amd64.deb ... | |
Unpacking libcaca-dev (0.99.beta19-2.2) ... | |
Selecting previously unselected package libglu1-mesa:amd64. | |
Preparing to unpack .../16-libglu1-mesa_9.0.1-1_amd64.deb ... | |
Unpacking libglu1-mesa:amd64 (9.0.1-1) ... | |
Selecting previously unselected package libglu1-mesa-dev:amd64. | |
Preparing to unpack .../17-libglu1-mesa-dev_9.0.1-1_amd64.deb ... | |
Unpacking libglu1-mesa-dev:amd64 (9.0.1-1) ... | |
Selecting previously unselected package libpulse-mainloop-glib0:amd64. | |
Preparing to unpack .../18-libpulse-mainloop-glib0_14.2-2_amd64.deb ... | |
Unpacking libpulse-mainloop-glib0:amd64 (14.2-2) ... | |
Selecting previously unselected package libffi-dev:amd64. | |
Preparing to unpack .../19-libffi-dev_3.3-6_amd64.deb ... | |
Unpacking libffi-dev:amd64 (3.3-6) ... | |
Selecting previously unselected package libglib2.0-bin. | |
Preparing to unpack .../20-libglib2.0-bin_2.66.8-1_amd64.deb ... | |
Unpacking libglib2.0-bin (2.66.8-1) ... | |
Selecting previously unselected package libglib2.0-dev-bin. | |
Preparing to unpack .../21-libglib2.0-dev-bin_2.66.8-1_amd64.deb ... | |
Unpacking libglib2.0-dev-bin (2.66.8-1) ... | |
Selecting previously unselected package uuid-dev:amd64. | |
Preparing to unpack .../22-uuid-dev_2.36.1-8_amd64.deb ... | |
Unpacking uuid-dev:amd64 (2.36.1-8) ... | |
Selecting previously unselected package libblkid-dev:amd64. | |
Preparing to unpack .../23-libblkid-dev_2.36.1-8_amd64.deb ... | |
Unpacking libblkid-dev:amd64 (2.36.1-8) ... | |
Selecting previously unselected package libsepol1-dev:amd64. | |
Preparing to unpack .../24-libsepol1-dev_3.1-1_amd64.deb ... | |
Unpacking libsepol1-dev:amd64 (3.1-1) ... | |
Selecting previously unselected package libpcre2-16-0:amd64. | |
Preparing to unpack .../25-libpcre2-16-0_10.36-2_amd64.deb ... | |
Unpacking libpcre2-16-0:amd64 (10.36-2) ... | |
Selecting previously unselected package libpcre2-32-0:amd64. | |
Preparing to unpack .../26-libpcre2-32-0_10.36-2_amd64.deb ... | |
Unpacking libpcre2-32-0:amd64 (10.36-2) ... | |
Selecting previously unselected package libpcre2-posix2:amd64. | |
Preparing to unpack .../27-libpcre2-posix2_10.36-2_amd64.deb ... | |
Unpacking libpcre2-posix2:amd64 (10.36-2) ... | |
Selecting previously unselected package libpcre2-dev:amd64. | |
Preparing to unpack .../28-libpcre2-dev_10.36-2_amd64.deb ... | |
Unpacking libpcre2-dev:amd64 (10.36-2) ... | |
Selecting previously unselected package libselinux1-dev:amd64. | |
Preparing to unpack .../29-libselinux1-dev_3.1-3_amd64.deb ... | |
Unpacking libselinux1-dev:amd64 (3.1-3) ... | |
Selecting previously unselected package libmount-dev:amd64. | |
Preparing to unpack .../30-libmount-dev_2.36.1-8_amd64.deb ... | |
Unpacking libmount-dev:amd64 (2.36.1-8) ... | |
Selecting previously unselected package libpcre16-3:amd64. | |
Preparing to unpack .../31-libpcre16-3_2%3a8.39-13_amd64.deb ... | |
Unpacking libpcre16-3:amd64 (2:8.39-13) ... | |
Selecting previously unselected package libpcre32-3:amd64. | |
Preparing to unpack .../32-libpcre32-3_2%3a8.39-13_amd64.deb ... | |
Unpacking libpcre32-3:amd64 (2:8.39-13) ... | |
Selecting previously unselected package libpcrecpp0v5:amd64. | |
Preparing to unpack .../33-libpcrecpp0v5_2%3a8.39-13_amd64.deb ... | |
Unpacking libpcrecpp0v5:amd64 (2:8.39-13) ... | |
Selecting previously unselected package libpcre3-dev:amd64. | |
Preparing to unpack .../34-libpcre3-dev_2%3a8.39-13_amd64.deb ... | |
Unpacking libpcre3-dev:amd64 (2:8.39-13) ... | |
Selecting previously unselected package libglib2.0-dev:amd64. | |
Preparing to unpack .../35-libglib2.0-dev_2.66.8-1_amd64.deb ... | |
Unpacking libglib2.0-dev:amd64 (2.66.8-1) ... | |
Selecting previously unselected package libpulse-dev:amd64. | |
Preparing to unpack .../36-libpulse-dev_14.2-2_amd64.deb ... | |
Unpacking libpulse-dev:amd64 (14.2-2) ... | |
Selecting previously unselected package x11proto-xext-dev. | |
Preparing to unpack .../37-x11proto-xext-dev_2020.1-1_all.deb ... | |
Unpacking x11proto-xext-dev (2020.1-1) ... | |
Selecting previously unselected package libxext-dev:amd64. | |
Preparing to unpack .../38-libxext-dev_2%3a1.3.3-1.1_amd64.deb ... | |
Unpacking libxext-dev:amd64 (2:1.3.3-1.1) ... | |
Selecting previously unselected package libsdl1.2-dev. | |
Preparing to unpack .../39-libsdl1.2-dev_1.2.15+dfsg2-6_amd64.deb ... | |
Unpacking libsdl1.2-dev (1.2.15+dfsg2-6) ... | |
Selecting previously unselected package libseccomp-dev:amd64. | |
Preparing to unpack .../40-libseccomp-dev_2.5.1-1_amd64.deb ... | |
Unpacking libseccomp-dev:amd64 (2.5.1-1) ... | |
Selecting previously unselected package libspice-protocol-dev. | |
Preparing to unpack .../41-libspice-protocol-dev_0.14.3-1_all.deb ... | |
Unpacking libspice-protocol-dev (0.14.3-1) ... | |
Selecting previously unselected package libspice-server-dev:amd64. | |
Preparing to unpack .../42-libspice-server-dev_0.14.3-2.1_amd64.deb ... | |
Unpacking libspice-server-dev:amd64 (0.14.3-2.1) ... | |
Selecting previously unselected package libsystemd-dev:amd64. | |
Preparing to unpack .../43-libsystemd-dev_247.3-6_amd64.deb ... | |
Unpacking libsystemd-dev:amd64 (247.3-6) ... | |
Selecting previously unselected package liburing-dev:amd64. | |
Preparing to unpack .../44-liburing-dev_0.7-3_amd64.deb ... | |
Unpacking liburing-dev:amd64 (0.7-3) ... | |
Selecting previously unselected package libusb-1.0-0-dev:amd64. | |
Preparing to unpack .../45-libusb-1.0-0-dev_2%3a1.0.24-3_amd64.deb ... | |
Unpacking libusb-1.0-0-dev:amd64 (2:1.0.24-3) ... | |
Selecting previously unselected package libusbredirparser-dev:amd64. | |
Preparing to unpack .../46-libusbredirparser-dev_0.8.0-1+b1_amd64.deb ... | |
Unpacking libusbredirparser-dev:amd64 (0.8.0-1+b1) ... | |
Selecting previously unselected package meson. | |
Preparing to unpack .../47-meson_0.56.2-1_all.deb ... | |
Unpacking meson (0.56.2-1) ... | |
Selecting previously unselected package libjs-underscore. | |
Preparing to unpack .../48-libjs-underscore_1.9.1~dfsg-3_all.deb ... | |
Unpacking libjs-underscore (1.9.1~dfsg-3) ... | |
Selecting previously unselected package libjs-sphinxdoc. | |
Preparing to unpack .../49-libjs-sphinxdoc_3.4.3-2_all.deb ... | |
Unpacking libjs-sphinxdoc (3.4.3-2) ... | |
Selecting previously unselected package sphinx-common. | |
Preparing to unpack .../50-sphinx-common_3.4.3-2_all.deb ... | |
Unpacking sphinx-common (3.4.3-2) ... | |
Selecting previously unselected package python3-alabaster. | |
Preparing to unpack .../51-python3-alabaster_0.7.8-1.1_all.deb ... | |
Unpacking python3-alabaster (0.7.8-1.1) ... | |
Selecting previously unselected package python-babel-localedata. | |
Preparing to unpack .../52-python-babel-localedata_2.8.0+dfsg.1-7_all.deb ... | |
Unpacking python-babel-localedata (2.8.0+dfsg.1-7) ... | |
Selecting previously unselected package python3-tz. | |
Preparing to unpack .../53-python3-tz_2021.1-1_all.deb ... | |
Unpacking python3-tz (2021.1-1) ... | |
Selecting previously unselected package python3-babel. | |
Preparing to unpack .../54-python3-babel_2.8.0+dfsg.1-7_all.deb ... | |
Unpacking python3-babel (2.8.0+dfsg.1-7) ... | |
Selecting previously unselected package sgml-base. | |
Preparing to unpack .../55-sgml-base_1.30_all.deb ... | |
Unpacking sgml-base (1.30) ... | |
Selecting previously unselected package xml-core. | |
Preparing to unpack .../56-xml-core_0.18+nmu1_all.deb ... | |
Unpacking xml-core (0.18+nmu1) ... | |
Selecting previously unselected package docutils-common. | |
Preparing to unpack .../57-docutils-common_0.16+dfsg-4_all.deb ... | |
Unpacking docutils-common (0.16+dfsg-4) ... | |
Selecting previously unselected package python3-roman. | |
Preparing to unpack .../58-python3-roman_2.0.0-5_all.deb ... | |
Unpacking python3-roman (2.0.0-5) ... | |
Selecting previously unselected package python3-docutils. | |
Preparing to unpack .../59-python3-docutils_0.16+dfsg-4_all.deb ... | |
Unpacking python3-docutils (0.16+dfsg-4) ... | |
Selecting previously unselected package python3-imagesize. | |
Preparing to unpack .../60-python3-imagesize_1.2.0-2_all.deb ... | |
Unpacking python3-imagesize (1.2.0-2) ... | |
Selecting previously unselected package python3-pygments. | |
Preparing to unpack .../61-python3-pygments_2.7.1+dfsg-2.1_all.deb ... | |
Unpacking python3-pygments (2.7.1+dfsg-2.1) ... | |
Selecting previously unselected package python3-snowballstemmer. | |
Preparing to unpack .../62-python3-snowballstemmer_2.1.0-1_all.deb ... | |
Unpacking python3-snowballstemmer (2.1.0-1) ... | |
Selecting previously unselected package python3-sphinx. | |
Preparing to unpack .../63-python3-sphinx_3.4.3-2_all.deb ... | |
Unpacking python3-sphinx (3.4.3-2) ... | |
Selecting previously unselected package quilt. | |
Preparing to unpack .../64-quilt_0.66-2.1_all.deb ... | |
Unpacking quilt (0.66-2.1) ... | |
Selecting previously unselected package libtext-unidecode-perl. | |
Preparing to unpack .../65-libtext-unidecode-perl_1.30-1_all.deb ... | |
Unpacking libtext-unidecode-perl (1.30-1) ... | |
Selecting previously unselected package texi2html. | |
Preparing to unpack .../66-texi2html_1.82+dfsg1-6_all.deb ... | |
Unpacking texi2html (1.82+dfsg1-6) ... | |
Selecting previously unselected package tex-common. | |
Preparing to unpack .../67-tex-common_6.16_all.deb ... | |
Unpacking tex-common (6.16) ... | |
Selecting previously unselected package texinfo. | |
Preparing to unpack .../68-texinfo_6.7.0.dfsg.2-6_amd64.deb ... | |
Unpacking texinfo (6.7.0.dfsg.2-6) ... | |
Selecting previously unselected package xfslibs-dev. | |
Preparing to unpack .../69-xfslibs-dev_5.10.0-4_amd64.deb ... | |
Unpacking xfslibs-dev (5.10.0-4) ... | |
Setting up librados-dev (14.2.21-1) ... | |
Setting up libpcrecpp0v5:amd64 (2:8.39-13) ... | |
Setting up libslang2-dev:amd64 (2.3.2-5) ... | |
Setting up libglib2.0-dev-bin (2.66.8-1) ... | |
Setting up libseccomp-dev:amd64 (2.5.1-1) ... | |
Setting up libpixman-1-dev:amd64 (0.40.0-1) ... | |
Setting up libpcre16-3:amd64 (2:8.39-13) ... | |
Setting up python3-alabaster (0.7.8-1.1) ... | |
Setting up libusbredirparser-dev:amd64 (0.8.0-1+b1) ... | |
Setting up libiscsi-dev:amd64 (1.19.0-3) ... | |
Setting up libsepol1-dev:amd64 (3.1-1) ... | |
Setting up libglib2.0-bin (2.66.8-1) ... | |
Setting up libusb-1.0-0-dev:amd64 (2:1.0.24-3) ... | |
Setting up meson (0.56.2-1) ... | |
Setting up quilt (0.66-2.1) ... | |
Setting up libspice-protocol-dev (0.14.3-1) ... | |
Setting up libaio-dev:amd64 (0.3.112-9) ... | |
Setting up libffi-dev:amd64 (3.3-6) ... | |
Setting up libsubunit0:amd64 (1.4.0-3) ... | |
Setting up libpcre2-16-0:amd64 (10.36-2) ... | |
Setting up libproxmox-backup-qemu0-dev (1.2.0-1) ... | |
Setting up python3-tz (2021.1-1) ... | |
Setting up python-babel-localedata (2.8.0+dfsg.1-7) ... | |
Setting up libnuma-dev:amd64 (2.0.12-1+b1) ... | |
Setting up libfdt-dev (1.6.0-1) ... | |
Setting up tex-common (6.16) ... | |
update-language: texlive-base not installed and configured, doing nothing! | |
Setting up libjemalloc-dev (5.2.1-3) ... | |
Setting up python3-roman (2.0.0-5) ... | |
Setting up python3-pygments (2.7.1+dfsg-2.1) ... | |
Setting up libpcre2-32-0:amd64 (10.36-2) ... | |
Setting up python3-snowballstemmer (2.1.0-1) ... | |
Setting up uuid-dev:amd64 (2.36.1-8) ... | |
Setting up libpulse-mainloop-glib0:amd64 (14.2-2) ... | |
Setting up libpcre32-3:amd64 (2:8.39-13) ... | |
Setting up libpcre2-posix2:amd64 (10.36-2) ... | |
Setting up x11proto-xext-dev (2020.1-1) ... | |
Setting up libcap-ng-dev (0.7.9-2.2+b1) ... | |
Setting up sgml-base (1.30) ... | |
Setting up libglu1-mesa:amd64 (9.0.1-1) ... | |
Setting up libtext-unidecode-perl (1.30-1) ... | |
Setting up libcaca-dev (0.99.beta19-2.2) ... | |
Setting up xfslibs-dev (5.10.0-4) ... | |
Setting up libsystemd-dev:amd64 (247.3-6) ... | |
Setting up liburing-dev:amd64 (0.7-3) ... | |
Setting up libpci-dev:amd64 (1:3.7.0-5) ... | |
Setting up librbd-dev (14.2.21-1) ... | |
Setting up libjs-underscore (1.9.1~dfsg-3) ... | |
Setting up python3-imagesize (1.2.0-2) ... | |
Setting up libspice-server-dev:amd64 (0.14.3-2.1) ... | |
Setting up libblkid-dev:amd64 (2.36.1-8) ... | |
Setting up libpcre2-dev:amd64 (10.36-2) ... | |
Setting up python3-babel (2.8.0+dfsg.1-7) ... | |
update-alternatives: using /usr/bin/pybabel-python3 to provide /usr/bin/pybabel (pybabel) in auto mode | |
Setting up libselinux1-dev:amd64 (3.1-3) ... | |
Setting up libpcre3-dev:amd64 (2:8.39-13) ... | |
Setting up libsubunit-dev:amd64 (1.4.0-3) ... | |
Setting up texi2html (1.82+dfsg1-6) ... | |
Setting up libglu1-mesa-dev:amd64 (9.0.1-1) ... | |
Setting up check:amd64 (0.15.2-2) ... | |
Setting up texinfo (6.7.0.dfsg.2-6) ... | |
Setting up libjs-sphinxdoc (3.4.3-2) ... | |
Setting up libxext-dev:amd64 (2:1.3.3-1.1) ... | |
Setting up xml-core (0.18+nmu1) ... | |
Setting up libmount-dev:amd64 (2.36.1-8) ... | |
Setting up libglib2.0-dev:amd64 (2.66.8-1) ... | |
Setting up sphinx-common (3.4.3-2) ... | |
Processing triggers for shared-mime-info (2.0-1) ... | |
Processing triggers for libglib2.0-0:amd64 (2.66.8-1) ... | |
Processing triggers for libc-bin (2.31-13) ... | |
Processing triggers for man-db (2.9.4-2) ... | |
Setting up libpulse-dev:amd64 (14.2-2) ... | |
Setting up libsdl1.2-dev (1.2.15+dfsg2-6) ... | |
Processing triggers for sgml-base (1.30) ... | |
Setting up docutils-common (0.16+dfsg-4) ... | |
Processing triggers for sgml-base (1.30) ... | |
Setting up python3-docutils (0.16+dfsg-4) ... | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2html4 to provide /usr/bin/rst2html4 (rst2html4) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2html5 to provide /usr/bin/rst2html5 (rst2html5) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode | |
update-alternatives: using /usr/share/docutils/scripts/python3/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode | |
Setting up python3-sphinx (3.4.3-2) ... | |
Setting up pve-qemu-kvm-build-deps (6.0.0-3) ... | |
lae@lilienne:~/build/pve-qemu$ make dinstall | |
test -f "qemu/configure" || git submodule update --init --recursive | |
Submodule 'qemu' (git://git.proxmox.com/git/mirror_qemu) registered for path 'qemu' | |
Cloning into '/home/lae/build/pve-qemu/qemu'... | |
Submodule path 'qemu': checked out '609d7596524ab204ccd71ef42c9eee4c7c338ea4' | |
Submodule 'capstone' (https://gitlab.com/qemu-project/capstone.git) registered for path 'qemu/capstone' | |
Submodule 'dtc' (https://gitlab.com/qemu-project/dtc.git) registered for path 'qemu/dtc' | |
Submodule 'meson' (https://gitlab.com/qemu-project/meson.git) registered for path 'qemu/meson' | |
Submodule 'roms/QemuMacDrivers' (https://gitlab.com/qemu-project/QemuMacDrivers.git) registered for path 'qemu/roms/QemuMacDrivers' | |
Submodule 'roms/SLOF' (https://gitlab.com/qemu-project/SLOF.git) registered for path 'qemu/roms/SLOF' | |
Submodule 'roms/edk2' (https://gitlab.com/qemu-project/edk2.git) registered for path 'qemu/roms/edk2' | |
Submodule 'roms/ipxe' (https://gitlab.com/qemu-project/ipxe.git) registered for path 'qemu/roms/ipxe' | |
Submodule 'roms/openbios' (https://gitlab.com/qemu-project/openbios.git) registered for path 'qemu/roms/openbios' | |
Submodule 'roms/opensbi' (https://gitlab.com/qemu-project/opensbi.git) registered for path 'qemu/roms/opensbi' | |
Submodule 'roms/qboot' (https://gitlab.com/qemu-project/qboot.git) registered for path 'qemu/roms/qboot' | |
Submodule 'roms/qemu-palcode' (https://gitlab.com/qemu-project/qemu-palcode.git) registered for path 'qemu/roms/qemu-palcode' | |
Submodule 'roms/seabios' (https://gitlab.com/qemu-project/seabios.git/) registered for path 'qemu/roms/seabios' | |
Submodule 'roms/seabios-hppa' (https://gitlab.com/qemu-project/seabios-hppa.git) registered for path 'qemu/roms/seabios-hppa' | |
Submodule 'roms/sgabios' (https://gitlab.com/qemu-project/sgabios.git) registered for path 'qemu/roms/sgabios' | |
Submodule 'roms/skiboot' (https://gitlab.com/qemu-project/skiboot.git) registered for path 'qemu/roms/skiboot' | |
Submodule 'roms/u-boot' (https://gitlab.com/qemu-project/u-boot.git) registered for path 'qemu/roms/u-boot' | |
Submodule 'roms/u-boot-sam460ex' (https://gitlab.com/qemu-project/u-boot-sam460ex.git) registered for path 'qemu/roms/u-boot-sam460ex' | |
Submodule 'roms/vbootrom' (https://gitlab.com/qemu-project/vbootrom.git) registered for path 'qemu/roms/vbootrom' | |
Submodule 'slirp' (https://gitlab.com/qemu-project/libslirp.git) registered for path 'qemu/slirp' | |
Submodule 'tests/fp/berkeley-softfloat-3' (https://gitlab.com/qemu-project/berkeley-softfloat-3.git) registered for path 'qemu/tests/fp/berkeley-softfloat-3' | |
Submodule 'tests/fp/berkeley-testfloat-3' (https://gitlab.com/qemu-project/berkeley-testfloat-3.git) registered for path 'qemu/tests/fp/berkeley-testfloat-3' | |
Submodule 'ui/keycodemapdb' (https://gitlab.com/qemu-project/keycodemapdb.git) registered for path 'qemu/ui/keycodemapdb' | |
Cloning into '/home/lae/build/pve-qemu/qemu/capstone'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/dtc'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/meson'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/QemuMacDrivers'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/SLOF'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/ipxe'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/openbios'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/opensbi'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/qboot'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/qemu-palcode'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/seabios'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/seabios-hppa'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/sgabios'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/skiboot'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/u-boot'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/u-boot-sam460ex'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/vbootrom'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/slirp'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/tests/fp/berkeley-softfloat-3'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/tests/fp/berkeley-testfloat-3'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/ui/keycodemapdb'... | |
Submodule path 'qemu/capstone': checked out 'f8b1b833015a4ae47110ed068e0deb7106ced66d' | |
Submodule path 'qemu/dtc': checked out '85e5d839847af54efab170f2b1331b2a6421e647' | |
Submodule path 'qemu/meson': checked out '776acd2a805c9b42b4f0375150977df42130317f' | |
Submodule path 'qemu/roms/QemuMacDrivers': checked out '90c488d5f4a407342247b9ea869df1c2d9c8e266' | |
Submodule path 'qemu/roms/SLOF': checked out '33a7322de13e9dca4b38851a345a58d37e7a441d' | |
Submodule path 'qemu/roms/edk2': checked out '06dc822d045c2bb42e497487935485302486e151' | |
Submodule 'SoftFloat' (https://github.com/ucb-bar/berkeley-softfloat-3.git) registered for path 'qemu/roms/edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3' | |
Submodule 'BaseTools/Source/C/BrotliCompress/brotli' (https://github.com/google/brotli) registered for path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli' | |
Submodule 'CryptoPkg/Library/OpensslLib/openssl' (https://github.com/openssl/openssl) registered for path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl' | |
Submodule 'MdeModulePkg/Library/BrotliCustomDecompressLib/brotli' (https://github.com/google/brotli) registered for path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli' | |
Submodule 'MdeModulePkg/Universal/RegularExpressionDxe/oniguruma' (https://github.com/kkos/oniguruma) registered for path 'qemu/roms/edk2/MdeModulePkg/Universal/RegularExpressionDxe/oniguruma' | |
Submodule 'UnitTestFrameworkPkg/Library/CmockaLib/cmocka' (https://git.cryptomilk.org/projects/cmocka.git) registered for path 'qemu/roms/edk2/UnitTestFrameworkPkg/Library/CmockaLib/cmocka' | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/MdeModulePkg/Universal/RegularExpressionDxe/oniguruma'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/UnitTestFrameworkPkg/Library/CmockaLib/cmocka'... | |
Submodule path 'qemu/roms/edk2/ArmPkg/Library/ArmSoftFloatLib/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037' | |
Submodule path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli': checked out '666c3280cc11dc433c303d79a83d4ffbdd12cc8d' | |
Submodule 'research/esaxx' (https://github.com/hillbig/esaxx) registered for path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/esaxx' | |
Submodule 'research/libdivsufsort' (https://github.com/y-256/libdivsufsort.git) registered for path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/libdivsufsort' | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/esaxx'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/libdivsufsort'... | |
Submodule path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/esaxx': checked out 'ca7cb332011ec37a8436487f210f396b84bd8273' | |
Submodule path 'qemu/roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/research/libdivsufsort': checked out '5f60d6f026c30fb4ac296f696b3c8b0eb71bd428' | |
Submodule path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl': checked out 'e2e09d9fba1187f8d6aafaa34d4172f56f1ffb72' | |
Submodule 'boringssl' (https://boringssl.googlesource.com/boringssl) registered for path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/boringssl' | |
Submodule 'krb5' (https://github.com/krb5/krb5) registered for path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/krb5' | |
Submodule 'pyca.cryptography' (https://github.com/pyca/cryptography.git) registered for path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography' | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/boringssl'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/krb5'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography'... | |
Submodule path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/boringssl': checked out '2070f8ad9151dc8f3a73bffaa146b5e6937a583f' | |
Submodule path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/krb5': checked out '890ca2f401924cdcb88f493950b04700bbe52db3' | |
Submodule path 'qemu/roms/edk2/CryptoPkg/Library/OpensslLib/openssl/pyca-cryptography': checked out '09403100de2f6f1cdd0d484dcb8e620f1c335c8f' | |
Submodule path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli': checked out '666c3280cc11dc433c303d79a83d4ffbdd12cc8d' | |
Submodule 'research/esaxx' (https://github.com/hillbig/esaxx) registered for path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/esaxx' | |
Submodule 'research/libdivsufsort' (https://github.com/y-256/libdivsufsort.git) registered for path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/libdivsufsort' | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/esaxx'... | |
Cloning into '/home/lae/build/pve-qemu/qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/libdivsufsort'... | |
Submodule path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/esaxx': checked out 'ca7cb332011ec37a8436487f210f396b84bd8273' | |
Submodule path 'qemu/roms/edk2/MdeModulePkg/Library/BrotliCustomDecompressLib/brotli/research/libdivsufsort': checked out '5f60d6f026c30fb4ac296f696b3c8b0eb71bd428' | |
Submodule path 'qemu/roms/edk2/MdeModulePkg/Universal/RegularExpressionDxe/oniguruma': checked out 'abfc8ff81df4067f309032467785e06975678f0d' | |
Submodule path 'qemu/roms/edk2/UnitTestFrameworkPkg/Library/CmockaLib/cmocka': checked out '1cc9cde3448cdd2e000886a26acf1caac2db7cf1' | |
Submodule path 'qemu/roms/ipxe': checked out '4bd064de239dab2426b31c9789a1f4d78087dc63' | |
Submodule path 'qemu/roms/openbios': checked out '4a0041107b8ef77e0e8337bfcb5f8078887261a7' | |
Submodule path 'qemu/roms/opensbi': checked out '234ed8e427f4d92903123199f6590d144e0d9351' | |
Submodule path 'qemu/roms/qboot': checked out 'a5300c4949b8d4de2d34bedfaed66793f48ec948' | |
Submodule path 'qemu/roms/qemu-palcode': checked out 'bf0e13698872450164fa7040da36a95d2d4b326f' | |
Submodule path 'qemu/roms/seabios': checked out '155821a1990b6de78dde5f98fa5ab90e802021e0' | |
Submodule path 'qemu/roms/seabios-hppa': checked out '73b740f77190643b2ada5ee97a9a108c6ef2a37b' | |
Submodule path 'qemu/roms/sgabios': checked out 'cbaee52287e5f32373181cff50a00b6c4ac9015a' | |
Submodule path 'qemu/roms/skiboot': checked out '3a6fdede6ce117facec0108afe716cf5d0472c3f' | |
Submodule path 'qemu/roms/u-boot': checked out 'd3689267f92c5956e09cc7d1baa4700141662bff' | |
Submodule path 'qemu/roms/u-boot-sam460ex': checked out '60b3916f33e617a815973c5a6df77055b2e3a588' | |
Submodule path 'qemu/roms/vbootrom': checked out '0c37a43527f0ee2b9584e7fb2fdc805e902635ac' | |
Submodule path 'qemu/slirp': checked out '8f43a99191afb47ca3f3c6972f6306209f367ece' | |
Submodule path 'qemu/tests/fp/berkeley-softfloat-3': checked out 'b64af41c3276f97f0e181920400ee056b9c88037' | |
Submodule path 'qemu/tests/fp/berkeley-testfloat-3': checked out '5a59dcec19327396a011a17fd924aed4fec416b3' | |
Submodule path 'qemu/ui/keycodemapdb': checked out '6119e6e19a050df847418de7babe5166779955e4' | |
# check if qemu/ was used for a build | |
# if so, please run 'make distclean' in the submodule and try again | |
test ! -f qemu/build/config.status | |
rm -rf pve-qemu-kvm-6.0.0 | |
cp -a qemu pve-qemu-kvm-6.0.0 | |
cp -a debian pve-qemu-kvm-6.0.0/debian | |
rm -rf pve-qemu-kvm-6.0.0/ui/keycodemapdb | |
cp -a keycodemapdb pve-qemu-kvm-6.0.0/ui/ | |
echo "git clone git://git.proxmox.com/git/pve-qemu.git\\ngit checkout 277d33454f77ec1d1e0bc04e37621e4dd2424b67" > pve-qemu-kvm-6.0.0/debian/SOURCE | |
cd pve-qemu-kvm-6.0.0; dpkg-buildpackage -b -us -uc -j | |
dpkg-buildpackage: info: source package pve-qemu-kvm | |
dpkg-buildpackage: info: source version 6.0.0-3 | |
dpkg-buildpackage: info: source distribution bullseye | |
dpkg-buildpackage: info: source changed by Proxmox Support Team <support@proxmox.com> | |
dpkg-buildpackage: info: host architecture amd64 | |
dpkg-source --before-build . | |
dpkg-source: info: using patch list from debian/patches/series | |
dpkg-source: info: applying extra/0001-monitor-qmp-fix-race-on-CHR_EVENT_CLOSED-without-OOB.patch | |
dpkg-source: info: applying extra/0002-block-io_uring-resubmit-when-result-is-EAGAIN.patch | |
dpkg-source: info: applying bitmap-mirror/0001-drive-mirror-add-support-for-sync-bitmap-mode-never.patch | |
dpkg-source: info: applying bitmap-mirror/0002-drive-mirror-add-support-for-conditional-and-always-.patch | |
dpkg-source: info: applying bitmap-mirror/0003-mirror-add-check-for-bitmap-mode-without-bitmap.patch | |
dpkg-source: info: applying bitmap-mirror/0004-mirror-switch-to-bdrv_dirty_bitmap_merge_internal.patch | |
dpkg-source: info: applying bitmap-mirror/0005-iotests-add-test-for-bitmap-mirror.patch | |
dpkg-source: info: applying bitmap-mirror/0006-mirror-move-some-checks-to-qmp.patch | |
dpkg-source: info: applying pve/0001-PVE-Config-block-file-change-locking-default-to-off.patch | |
dpkg-source: info: applying pve/0002-PVE-Config-Adjust-network-script-path-to-etc-kvm.patch | |
dpkg-source: info: applying pve/0003-PVE-Config-set-the-CPU-model-to-kvm64-32-instead-of-.patch | |
dpkg-source: info: applying pve/0004-PVE-Config-ui-spice-default-to-pve-certificates.patch | |
dpkg-source: info: applying pve/0005-PVE-Config-glusterfs-no-default-logfile-if-daemonize.patch | |
dpkg-source: info: applying pve/0006-PVE-Config-rbd-block-rbd-disable-rbd_cache_writethro.patch | |
dpkg-source: info: applying pve/0007-PVE-Up-qmp-add-get_link_status.patch | |
dpkg-source: info: applying pve/0008-PVE-Up-glusterfs-allow-partial-reads.patch | |
dpkg-source: info: applying pve/0009-PVE-Up-qemu-img-return-success-on-info-without-snaps.patch | |
dpkg-source: info: applying pve/0010-PVE-Up-qemu-img-dd-add-osize-and-read-from-to-stdin-.patch | |
dpkg-source: info: applying pve/0011-PVE-Up-qemu-img-dd-add-isize-parameter.patch | |
dpkg-source: info: applying pve/0012-PVE-Up-qemu-img-dd-add-n-skip_create.patch | |
dpkg-source: info: applying pve/0013-PVE-virtio-balloon-improve-query-balloon.patch | |
dpkg-source: info: applying pve/0014-PVE-qapi-modify-query-machines.patch | |
dpkg-source: info: applying pve/0015-PVE-qapi-modify-spice-query.patch | |
dpkg-source: info: applying pve/0016-PVE-add-savevm-async-for-background-state-snapshots.patch | |
dpkg-source: info: applying pve/0017-PVE-add-optional-buffer-size-to-QEMUFile.patch | |
dpkg-source: info: applying pve/0018-PVE-block-add-the-zeroinit-block-driver-filter.patch | |
dpkg-source: info: applying pve/0019-PVE-Add-dummy-id-command-line-parameter.patch | |
dpkg-source: info: applying pve/0020-PVE-Config-Revert-target-i386-disable-LINT0-after-re.patch | |
dpkg-source: info: applying pve/0021-PVE-Up-Config-file-posix-make-locking-optiono-on-cre.patch | |
dpkg-source: info: applying pve/0022-PVE-monitor-disable-oob-capability.patch | |
dpkg-source: info: applying pve/0023-PVE-Compat-4.0-used-balloon-qemu-4-0-config-size-fal.patch | |
dpkg-source: info: applying pve/0024-PVE-Allow-version-code-in-machine-type.patch | |
dpkg-source: info: applying pve/0025-PVE-Backup-add-vma-backup-format-code.patch | |
dpkg-source: info: applying pve/0026-PVE-Backup-add-backup-dump-block-driver.patch | |
dpkg-source: info: applying pve/0027-PVE-Backup-proxmox-backup-patches-for-qemu.patch | |
dpkg-source: info: applying pve/0028-PVE-Backup-pbs-restore-new-command-to-restore-from-p.patch | |
dpkg-source: info: applying pve/0029-PVE-Backup-Add-dirty-bitmap-tracking-for-incremental.patch | |
dpkg-source: info: applying pve/0030-PVE-various-PBS-fixes.patch | |
dpkg-source: info: applying pve/0031-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch | |
dpkg-source: info: applying pve/0032-PVE-add-query_proxmox_support-QMP-command.patch | |
dpkg-source: info: applying pve/0033-PVE-add-query-pbs-bitmap-info-QMP-call.patch | |
dpkg-source: info: applying pve/0034-PVE-redirect-stderr-to-journal-when-daemonized.patch | |
dpkg-source: info: applying pve/0035-PVE-Add-sequential-job-transaction-support.patch | |
dpkg-source: info: applying pve/0036-PVE-Backup-Use-a-transaction-to-synchronize-job-stat.patch | |
dpkg-source: info: applying pve/0037-PVE-Backup-Don-t-block-on-finishing-and-cleanup-crea.patch | |
dpkg-source: info: applying pve/0038-PVE-Migrate-dirty-bitmap-state-via-savevm.patch | |
dpkg-source: info: applying pve/0039-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch | |
dpkg-source: info: applying pve/0040-PVE-fall-back-to-open-iscsi-initiatorname.patch | |
dpkg-source: info: applying pve/0041-PVE-Use-coroutine-QMP-for-backup-cancel_backup.patch | |
dpkg-source: info: applying pve/0042-PBS-add-master-key-support.patch | |
dpkg-source: info: applying pve/0043-PVE-block-pbs-fast-path-reads-without-allocation-if-.patch | |
dpkg-source: info: applying pve/0044-PVE-block-stream-increase-chunk-size.patch | |
dpkg-source: info: applying pve/0045-block-io-accept-NULL-qiov-in-bdrv_pad_request.patch | |
dpkg-source: info: applying pve/0046-block-add-alloc-track-driver.patch | |
dpkg-source: info: applying pve/0047-PVE-whitelist-invalid-QAPI-names-for-backwards-compa.patch | |
dpkg-source: info: applying pve/0048-PVE-savevm-async-register-yank-before-migration_inco.patch | |
fakeroot debian/rules clean | |
make[1]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' | |
dh_testdir | |
dh_testroot | |
rm -f build-stamp | |
# Add here commands to clean up after the build process. | |
/usr/bin/make distclean | |
make[2]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' | |
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h | |
find . \( -name '*.so' -o -name '*.dll' -o -name '*.[oda]' \) -type f \ | |
! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-aarch64.a \ | |
! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-arm.a \ | |
-exec rm {} + | |
rm -f TAGS cscope.* *.pod *~ */*~ | |
rm -f fsdev/*.pod scsi/*.pod | |
rm -f config-host.mak config-host.h* | |
rm -f tests/tcg/config-*.mak | |
rm -f config-all-disas.mak config.status | |
rm -f roms/seabios/config.mak roms/vgabios/config.mak | |
rm -f qemu-plugins-ld.symbols qemu-plugins-ld64.symbols | |
rm -f *-config-target.h *-config-devices.mak *-config-devices.h | |
rm -rf meson-private meson-logs meson-info compile_commands.json | |
rm -f Makefile.ninja Makefile.mtest build.ninja.stamp meson.stamp | |
rm -f config.log | |
rm -f linux-headers/asm | |
rm -Rf .sdk | |
make[2]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' | |
cp -f /usr/share/misc/config.sub config.sub | |
cp -f /usr/share/misc/config.guess config.guess | |
dh_clean | |
make[1]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' | |
debian/rules build | |
make[1]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' | |
dh_testdir | |
# Add here commands to configure the package. | |
# guest-agent is only required for guest systems | |
./configure \ | |
--with-git-submodules=ignore \ | |
--docdir=/usr/share/doc/pve-qemu-kvm \ | |
--localstatedir=/var \ | |
--prefix=/usr \ | |
--sysconfdir=/etc \ | |
--target-list=x86_64-softmmu,aarch64-softmmu \ | |
--with-suffix="kvm" \ | |
--with-pkgversion="pve-qemu-kvm_6.0.0" \ | |
--audio-drv-list="alsa,pa" \ | |
--datadir=/usr/share \ | |
--libexecdir=/usr/lib/kvm \ | |
--disable-capstone \ | |
--disable-gtk \ | |
--disable-guest-agent \ | |
--disable-guest-agent-msi \ | |
--disable-libnfs \ | |
--disable-libxml2 \ | |
--disable-sdl \ | |
--disable-smartcard \ | |
--disable-strip \ | |
--disable-xen \ | |
--enable-curl \ | |
--enable-docs \ | |
--enable-glusterfs \ | |
--enable-gnutls \ | |
--enable-libiscsi \ | |
--enable-libusb \ | |
--enable-linux-aio \ | |
--enable-linux-io-uring \ | |
--enable-numa \ | |
--enable-rbd \ | |
--enable-seccomp \ | |
--enable-spice \ | |
--enable-usb-redir \ | |
--enable-virtfs \ | |
--enable-virtiofsd \ | |
--enable-xfsctl | |
Using './build' as the directory for build output | |
The Meson build system | |
Version: 0.56.2 | |
Source dir: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 | |
Build dir: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build | |
Build type: native build | |
Project name: qemu | |
Project version: 6.0.0 | |
C compiler for the host machine: cc (gcc 10.2.1 "cc (Debian 10.2.1-6) 10.2.1 20210110") | |
C linker for the host machine: cc ld.bfd 2.35.2 | |
Host machine cpu family: x86_64 | |
Host machine cpu: x86_64 | |
Program sh found: YES (/usr/bin/sh) | |
Program python3 found: YES (/usr/bin/python3) | |
Program bzip2 found: YES (/usr/bin/bzip2) | |
C++ compiler for the host machine: c++ (gcc 10.2.1 "c++ (Debian 10.2.1-6) 10.2.1 20210110") | |
C++ linker for the host machine: c++ ld.bfd 2.35.2 | |
Program cgcc found: NO | |
Library m found: YES | |
Library util found: YES | |
Run-time dependency appleframeworks found: NO (tried framework) | |
Found pkg-config: /usr/bin/pkg-config (0.29.2) | |
Run-time dependency pixman-1 found: YES 0.40.0 | |
Library aio found: YES | |
Run-time dependency zlib found: YES 1.2.11 | |
Dependency libnfs skipped: feature libnfs disabled | |
Run-time dependency appleframeworks found: NO (tried framework) | |
Run-time dependency libseccomp found: YES 2.5.1 | |
Has header "cap-ng.h" : YES | |
Library cap-ng found: YES | |
Run-time dependency xkbcommon found: NO (tried pkgconfig) | |
Library rt found: YES | |
Run-time dependency libiscsi found: YES 1.19.0 | |
Run-time dependency libzstd found: NO (tried pkgconfig) | |
Run-time dependency libcurl found: YES 7.74.0 | |
Run-time dependency libudev found: YES 247 | |
Library mpathpersist found: NO | |
Run-time dependency ncursesw found: YES 6.2.20201114 | |
Has header "brlapi.h" : YES | |
Library brlapi found: YES | |
Dependency sdl2 skipped: feature sdl disabled | |
Library rados found: YES | |
Has header "rbd/librbd.h" : YES | |
Library rbd found: YES | |
Run-time dependency glusterfs-api found: YES 7.9.2 | |
Has header "bzlib.h" : NO | |
Has header "lzfse.h" : NO | |
Dependency gtk+-3.0 skipped: feature gtk disabled | |
Run-time dependency libpng found: YES 1.6.37 | |
Run-time dependency libjpeg found: YES 2.0.6 | |
Has header "sasl/sasl.h" : YES | |
Library sasl2 found: YES | |
Has header "snappy-c.h" : NO | |
Has header "lzo/lzo1x.h" : NO | |
Run-time dependency u2f-emu found: NO (tried pkgconfig) | |
Run-time dependency libkeyutils found: NO (tried pkgconfig) | |
Checking for function "gettid" : YES | |
Library uuid found: YES | |
Library systemd found: YES | |
Library proxmox_backup_qemu found: YES | |
Run-time dependency fuse3 found: NO (tried pkgconfig) | |
Has header "linux/btrfs.h" : YES | |
Has header "libdrm/drm.h" : YES | |
Has header "pty.h" : YES | |
Has header "sys/ioccom.h" : NO | |
Has header "sys/kcov.h" : NO | |
Checking for function "system" : YES | |
Checking for function "preadv" : YES | |
Program scripts/minikconf.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/minikconf.py) | |
Configuring x86_64-softmmu-config-target.h using configuration | |
Configuring x86_64-softmmu-config-devices.mak with command | |
Reading depfile: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build/meson-private/x86_64-softmmu-config-devices.mak.d | |
Configuring x86_64-softmmu-config-devices.h using configuration | |
Configuring aarch64-softmmu-config-target.h using configuration | |
Configuring aarch64-softmmu-config-devices.mak with command | |
Reading depfile: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build/meson-private/aarch64-softmmu-config-devices.mak.d | |
Configuring aarch64-softmmu-config-devices.h using configuration | |
Run-time dependency slirp found: YES 4.4.0 | |
Library fdt found: YES | |
Configuring config-host.h using configuration | |
Program scripts/hxtool found: YES (/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/hxtool) | |
Program scripts/shaderinclude.pl found: YES (/usr/bin/env perl /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/shaderinclude.pl) | |
Program scripts/qapi-gen.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/qapi-gen.py) | |
Program scripts/qemu-version.sh found: YES (/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/qemu-version.sh) | |
|Executing subproject libvhost-user method meson | |
| | |
|Project name: libvhost-user | |
|Project version: undefined | |
|C compiler for the host machine: cc (gcc 10.2.1 "cc (Debian 10.2.1-6) 10.2.1 20210110") | |
|C linker for the host machine: cc ld.bfd 2.35.2 | |
|Run-time dependency threads found: YES | |
|Dependency glib-2.0 found: YES 6.0.0 (overridden) | |
|Build targets in project: 8 | |
|Subproject libvhost-user finished. | |
Dependency threads found: YES unknown (cached) | |
Program keycodemapdb/tools/keymap-gen found: YES (/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/ui/keycodemapdb/tools/keymap-gen) | |
Program scripts/decodetree.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/decodetree.py) | |
Program ../scripts/modules/module_block.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/block/../scripts/modules/module_block.py) | |
Program ../scripts/block-coroutine-wrapper.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/block/../scripts/block-coroutine-wrapper.py) | |
Program nm found: YES | |
Program scripts/undefsym.py found: YES (/usr/bin/python3 /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/undefsym.py) | |
Program scripts/feature_to_c.sh found: YES (/bin/sh /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/scripts/feature_to_c.sh) | |
Library ibumad found: YES | |
Configuring 50-qemu-gpu.json using configuration | |
Configuring 50-qemu-virtiofsd.json using configuration | |
Configuring 50-edk2-i386-secure.json using configuration | |
Configuring 50-edk2-x86_64-secure.json using configuration | |
Configuring 60-edk2-aarch64.json using configuration | |
Configuring 60-edk2-arm.json using configuration | |
Configuring 60-edk2-i386.json using configuration | |
Configuring 60-edk2-x86_64.json using configuration | |
Program qemu-keymap found: NO | |
Program sphinx-build found: YES (/usr/bin/sphinx-build) | |
Program python3 found: YES (/usr/bin/python3) | |
Program diff found: YES (/usr/bin/diff) | |
Program dbus-daemon found: YES (/usr/bin/dbus-daemon) | |
Program initrd-stress.sh found: YES (/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tests/migration/initrd-stress.sh) | |
Build targets in project: 465 | |
qemu 6.0.0 | |
Directories | |
Install prefix: /usr | |
BIOS directory: share/kvm | |
firmware path: /usr/share/qemu-firmware | |
binary directory: bin | |
library directory: lib | |
module directory: lib/kvm | |
libexec directory: lib/kvm | |
include directory: include | |
config directory: /etc | |
local state directory: /var | |
Manual directory: share/man | |
Doc directory: /usr/share/doc/pve-qemu-kvm | |
Build directory: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build | |
Source path: /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 | |
GIT submodules: ui/keycodemapdb tests/fp/berkeley-testfloat-3 tests/fp/berkeley-softfloat-3 | |
Host binaries | |
git: git | |
make: make | |
python: /usr/bin/python3 (version: 3.9) | |
sphinx-build: YES | |
genisoimage: /usr/bin/genisoimage | |
smbd: "/usr/sbin/smbd" | |
Configurable features | |
Documentation: YES | |
system-mode emulation: YES | |
user-mode emulation: NO | |
block layer: YES | |
Install blobs: YES | |
module support: NO | |
plugin support: NO | |
fuzzing support: NO | |
Audio drivers: alsa pa | |
Trace backends: log | |
QOM debugging: YES | |
vhost-kernel support: YES | |
vhost-net support: YES | |
vhost-crypto support: YES | |
vhost-scsi support: YES | |
vhost-vsock support: YES | |
vhost-user support: YES | |
vhost-user-blk server support: YES | |
vhost-user-fs support: YES | |
vhost-vdpa support: YES | |
build guest agent: NO | |
Compilation | |
host CPU: x86_64 | |
host endianness: little | |
C compiler: cc | |
Host C compiler: cc | |
C++ compiler: c++ | |
ARFLAGS: rv | |
CFLAGS: -O2 -g | |
CXXFLAGS: -O2 -g | |
QEMU_CFLAGS: -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong | |
QEMU_LDFLAGS: -Wl,--warn-common -Wl,-z,relro -Wl,-z,now -m64 -fstack-protector-strong | |
profiler: NO | |
link-time optimization (LTO): NO | |
PIE: YES | |
static build: NO | |
malloc trim support: YES | |
membarrier: NO | |
preadv support: YES | |
fdatasync: YES | |
madvise: YES | |
posix_madvise: YES | |
posix_memalign: YES | |
debug stack usage: NO | |
mutex debugging: NO | |
memory allocator: system | |
avx2 optimization: YES | |
avx512f optimization: NO | |
gprof enabled: NO | |
gcov: NO | |
thread sanitizer: NO | |
CFI support: NO | |
strip binaries: NO | |
sparse: NO | |
mingw32 support: NO | |
x86_64 tests: cc | |
Targets and accelerators | |
KVM support: YES | |
HAX support: NO | |
HVF support: NO | |
WHPX support: NO | |
Xen support: NO | |
TCG support: YES | |
TCG backend: native (x86_64) | |
TCG debug enabled: NO | |
target list: x86_64-softmmu aarch64-softmmu | |
default devices: YES | |
out of process emulation: YES | |
Block layer support | |
coroutine backend: ucontext | |
coroutine pool: YES | |
Block whitelist (rw): | |
Block whitelist (ro): | |
VirtFS support: YES | |
build virtiofs daemon: YES | |
Live block migration: YES | |
replication support: YES | |
bochs support: YES | |
cloop support: YES | |
dmg support: YES | |
qcow v1 support: YES | |
vdi support: YES | |
vvfat support: YES | |
qed support: YES | |
parallels support: YES | |
sheepdog support: NO | |
FUSE exports: NO | |
Crypto | |
TLS priority: "NORMAL" | |
GNUTLS support: YES | |
libgcrypt: NO | |
nettle: YES | |
XTS: YES | |
crypto afalg: NO | |
rng-none: NO | |
Linux keyring: YES | |
Dependencies | |
SDL support: NO | |
SDL image support: NO | |
GTK support: NO | |
pixman: YES | |
VTE support: NO | |
slirp support: system | |
libtasn1: YES | |
PAM: NO | |
iconv support: YES | |
curses support: YES | |
virgl support: YES | |
curl support: YES | |
Multipath support: NO | |
VNC support: YES | |
VNC SASL support: YES | |
VNC JPEG support: YES | |
VNC PNG support: YES | |
brlapi support: YES | |
vde support: YES | |
netmap support: NO | |
Linux AIO support: YES | |
Linux io_uring support: YES | |
ATTR/XATTR support: YES | |
RDMA support: YES | |
PVRDMA support: YES | |
fdt support: system | |
libcap-ng support: YES | |
spice support: YES | |
rbd support: YES | |
xfsctl support: YES | |
smartcard support: NO | |
U2F support: NO | |
libusb: YES | |
usb net redir: YES | |
OpenGL support: YES | |
GBM: YES | |
libiscsi support: YES | |
libnfs support: NO | |
seccomp support: YES | |
GlusterFS support: YES | |
TPM support: YES | |
libssh support: YES | |
lzo support: NO | |
snappy support: NO | |
bzip2 support: NO | |
lzfse support: NO | |
zstd support: NO | |
NUMA host support: YES | |
libxml2: NO | |
PBS bdrv support: YES | |
capstone: NO | |
libpmem support: YES | |
libdaxctl support: NO | |
libudev: YES | |
FUSE lseek: NO | |
Subprojects | |
libvhost-user: YES | |
Found ninja-1.10.1 at /usr/bin/ninja | |
dh_testdir | |
# Add here commands to compile the package. | |
/usr/bin/make | |
make[2]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' | |
changing dir to build for /usr/bin/make ""... | |
make[3]: Entering directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build' | |
GIT ui/keycodemapdb tests/fp/berkeley-testfloat-3 tests/fp/berkeley-softfloat-3 | |
/usr/bin/ninja build.ninja && touch build.ninja.stamp | |
ninja: no work to do. | |
/usr/bin/meson introspect --targets --tests --benchmarks | /usr/bin/python3 -B scripts/mtest2make.py > Makefile.mtest | |
GIT ui/keycodemapdb tests/fp/berkeley-testfloat-3 tests/fp/berkeley-softfloat-3 | |
AS multiboot.o | |
AS linuxboot.o | |
CC linuxboot_dma.o | |
AS kvmvapic.o | |
AS pvh.o | |
CC pvh_main.o | |
BUILD multiboot.img | |
BUILD linuxboot.img | |
BUILD kvmvapic.img | |
BUILD multiboot.raw | |
BUILD linuxboot.raw | |
BUILD kvmvapic.raw | |
SIGN multiboot.bin | |
BUILD linuxboot_dma.img | |
SIGN linuxboot.bin | |
SIGN kvmvapic.bin | |
BUILD linuxboot_dma.raw | |
SIGN linuxboot_dma.bin | |
BUILD pvh.img | |
BUILD pvh.raw | |
SIGN pvh.bin | |
[1/2951] Generating trace-hw_alpha.h with a custom command | |
[2/2951] Generating trace-hw_adc.h with a custom command | |
[3/2951] Generating trace-crypto.c with a custom command | |
[4/2951] Generating trace-qapi.c with a custom command | |
[5/2951] Generating trace-qom.c with a custom command | |
[6/2951] Generating trace-backends_tpm.c with a custom command | |
[7/2951] Generating trace-chardev.c with a custom command | |
[8/2951] Generating trace-hw_9pfs.c with a custom command | |
[9/2951] Generating trace-hw_adc.c with a custom command | |
[10/2951] Generating trace-chardev.h with a custom command | |
[11/2951] Generating trace-crypto.h with a custom command | |
[12/2951] Generating trace-qom.h with a custom command | |
[13/2951] Compiling C object subprojects/libvhost-user/link-test.p/link-test.c.o | |
[14/2951] Generating trace-hw_ide.c with a custom command | |
[15/2951] Generating trace-hw_acpi.c with a custom command | |
[16/2951] Generating trace-qapi.h with a custom command | |
[17/2951] Generating trace-hw_s390x.c with a custom command | |
[18/2951] Generating trace-hw_acpi.h with a custom command | |
[19/2951] Generating trace-root.c with a custom command | |
[20/2951] Generating trace-root.h with a custom command | |
[21/2951] Generating trace-hw_9pfs.h with a custom command | |
[22/2951] Generating trace-monitor.c with a custom command | |
[23/2951] Generating trace-monitor.h with a custom command | |
[24/2951] Generating trace-hw_scsi.c with a custom command | |
[25/2951] Generating trace-authz.c with a custom command | |
[26/2951] Generating trace-authz.h with a custom command | |
[27/2951] Generating trace-util.h with a custom command | |
[28/2951] Generating trace-util.c with a custom command | |
[29/2951] Generating trace-scsi.h with a custom command | |
[30/2951] Generating trace-scsi.c with a custom command | |
[31/2951] Generating trace-io.c with a custom command | |
[32/2951] Generating trace-accel_kvm.c with a custom command | |
[33/2951] Generating trace-nbd.c with a custom command | |
[34/2951] Generating trace-backends.h with a custom command | |
[35/2951] Generating trace-accel_kvm.h with a custom command | |
[36/2951] Generating trace-audio.h with a custom command | |
[37/2951] Generating trace-audio.c with a custom command | |
[38/2951] Generating trace-hw_alpha.c with a custom command | |
[39/2951] Generating trace-block.c with a custom command | |
[40/2951] Generating trace-io.h with a custom command | |
[41/2951] Generating trace-backends_tpm.h with a custom command | |
[42/2951] Generating trace-hw_arm.c with a custom command | |
[43/2951] Generating trace-hw_scsi.h with a custom command | |
[44/2951] Generating trace-block.h with a custom command | |
[45/2951] Generating trace-nbd.h with a custom command | |
[46/2951] Generating trace-backends.c with a custom command | |
[47/2951] Generating trace-hw_audio.h with a custom command | |
[48/2951] Generating trace-hw_audio.c with a custom command | |
[49/2951] Generating trace-hw_block_dataplane.h with a custom command | |
[50/2951] Generating trace-hw_block_dataplane.c with a custom command | |
[51/2951] Generating trace-hw_char.c with a custom command | |
[52/2951] Generating trace-hw_dma.c with a custom command | |
[53/2951] Generating trace-hw_hppa.h with a custom command | |
[54/2951] Generating trace-hw_arm.h with a custom command | |
[55/2951] Generating trace-hw_dma.h with a custom command | |
[56/2951] Generating trace-hw_hppa.c with a custom command | |
[57/2951] Generating trace-hw_hyperv.c with a custom command | |
[58/2951] Generating trace-hw_i2c.c with a custom command | |
[59/2951] Generating trace-hw_block.c with a custom command | |
[60/2951] Generating trace-hw_hyperv.h with a custom command | |
[61/2951] Compiling C object subprojects/libvhost-user/libvhost-user-glib.a.p/libvhost-user-glib.c.o | |
[62/2951] Generating trace-hw_char.h with a custom command | |
[63/2951] Generating trace-hw_display.h with a custom command | |
[64/2951] Generating trace-hw_display.c with a custom command | |
[65/2951] Generating trace-hw_i2c.h with a custom command | |
[66/2951] Generating trace-hw_i386.c with a custom command | |
[67/2951] Generating trace-hw_i386_xen.c with a custom command | |
[68/2951] Generating trace-net.c with a custom command | |
[69/2951] Generating trace-hw_i386.h with a custom command | |
[70/2951] Generating trace-hw_i386_xen.h with a custom command | |
[71/2951] Generating trace-hw_mips.h with a custom command | |
[72/2951] Linking static target subprojects/libvhost-user/libvhost-user-glib.a | |
[73/2951] Generating trace-hw_input.c with a custom command | |
[74/2951] Generating trace-hw_isa.h with a custom command | |
[75/2951] Generating trace-hw_mem.h with a custom command | |
[76/2951] Generating trace-hw_isa.c with a custom command | |
[77/2951] Generating trace-hw_mem.c with a custom command | |
[78/2951] Generating trace-hw_mips.c with a custom command | |
[79/2951] Generating trace-hw_input.h with a custom command | |
[80/2951] Generating trace-hw_block.h with a custom command | |
[81/2951] Generating trace-hw_intc.c with a custom command | |
[82/2951] Generating trace-hw_misc_macio.h with a custom command | |
[83/2951] Generating trace-hw_ide.h with a custom command | |
[84/2951] Generating trace-hw_misc.c with a custom command | |
[85/2951] Generating trace-hw_misc_macio.c with a custom command | |
[86/2951] Generating trace-hw_net_can.c with a custom command | |
[87/2951] Generating trace-hw_nvram.h with a custom command | |
[88/2951] Generating trace-hw_nvram.c with a custom command | |
[89/2951] Generating trace-hw_net_can.h with a custom command | |
[90/2951] Generating trace-hw_pci.h with a custom command | |
[91/2951] Generating trace-hw_pci.c with a custom command | |
[92/2951] Generating trace-hw_pci_host.c with a custom command | |
[93/2951] Generating trace-hw_intc.h with a custom command | |
[94/2951] Generating trace-hw_misc.h with a custom command | |
[95/2951] Generating trace-hw_pci_host.h with a custom command | |
[96/2951] Generating trace-hw_ppc.h with a custom command | |
[97/2951] Generating trace-hw_ppc.c with a custom command | |
[98/2951] Generating trace-hw_rdma.h with a custom command | |
[99/2951] Generating trace-hw_rdma.c with a custom command | |
[100/2951] Generating trace-hw_rdma_vmw.h with a custom command | |
[101/2951] Generating trace-hw_rdma_vmw.c with a custom command | |
[102/2951] Generating trace-hw_rtc.h with a custom command | |
[103/2951] Generating trace-hw_rtc.c with a custom command | |
[104/2951] Generating trace-hw_net.c with a custom command | |
[105/2951] Generating trace-hw_s390x.h with a custom command | |
[106/2951] Generating trace-hw_sd.c with a custom command | |
[107/2951] Generating trace-hw_sparc.c with a custom command | |
[108/2951] Generating trace-hw_sparc64.c with a custom command | |
[109/2951] Generating trace-hw_tpm.c with a custom command | |
[110/2951] Generating trace-hw_sd.h with a custom command | |
[111/2951] Generating trace-hw_sparc.h with a custom command | |
[112/2951] Generating trace-hw_ssi.c with a custom command | |
[113/2951] Generating trace-hw_sparc64.h with a custom command | |
[114/2951] Generating trace-hw_ssi.h with a custom command | |
[115/2951] Generating trace-hw_timer.h with a custom command | |
[116/2951] Generating trace-hw_timer.c with a custom command | |
[117/2951] Generating trace-hw_tpm.h with a custom command | |
[118/2951] Generating trace-hw_virtio.c with a custom command | |
[119/2951] Generating trace-hw_watchdog.h with a custom command | |
[120/2951] Generating trace-hw_watchdog.c with a custom command | |
[121/2951] Generating trace-hw_gpio.c with a custom command | |
[122/2951] Generating trace-net.h with a custom command | |
[123/2951] Generating trace-hw_vfio.c with a custom command | |
[124/2951] Generating trace-hw_xen.c with a custom command | |
[125/2951] Generating trace-hw_gpio.h with a custom command | |
[126/2951] Generating qemu-version.h with a custom command (wrapped by meson to capture output) | |
[127/2951] Generating trace-hw_xen.h with a custom command | |
[128/2951] Generating trace-softmmu.c with a custom command | |
[129/2951] Generating trace-hw_remote.h with a custom command | |
[130/2951] Generating trace-softmmu.h with a custom command | |
[131/2951] Generating trace-hw_remote.c with a custom command | |
[132/2951] Generating qemu-img-cmds.h with a custom command (wrapped by meson to capture output) | |
[133/2951] Generating trace-accel_tcg.h with a custom command | |
[134/2951] Generating trace-hw_net.h with a custom command | |
[135/2951] Generating trace-hw_usb.c with a custom command | |
[136/2951] Generating trace-ui.c with a custom command | |
[137/2951] Generating trace-hw_vfio.h with a custom command | |
[138/2951] Generating trace-hw_virtio.h with a custom command | |
[139/2951] Generating trace-migration.c with a custom command | |
[140/2951] Generating trace-ui.h with a custom command | |
[141/2951] Generating trace-accel_tcg.c with a custom command | |
[142/2951] Generating trace-hw_core.c with a custom command | |
[143/2951] Generating trace-target_arm.h with a custom command | |
[144/2951] Generating trace-target_arm.c with a custom command | |
[145/2951] Generating trace-target_hppa.h with a custom command | |
[146/2951] Generating trace-hw_core.h with a custom command | |
[147/2951] Generating trace-target_hppa.c with a custom command | |
[148/2951] Generating trace-target_i386.h with a custom command | |
[149/2951] Generating trace-target_i386.c with a custom command | |
[150/2951] Generating trace-target_i386_kvm.h with a custom command | |
[151/2951] Generating trace-target_i386_kvm.c with a custom command | |
[152/2951] Generating trace-hw_usb.h with a custom command | |
[153/2951] Generating trace-target_mips.h with a custom command | |
[154/2951] Generating trace-target_mips.c with a custom command | |
[155/2951] Generating trace-target_ppc.c with a custom command | |
[156/2951] Generating trace-target_riscv.h with a custom command | |
[157/2951] Generating trace-target_riscv.c with a custom command | |
[158/2951] Generating trace-target_s390x.h with a custom command | |
[159/2951] Generating trace-target_s390x.c with a custom command | |
[160/2951] Generating hmp-commands-info.h with a custom command (wrapped by meson to capture output) | |
[161/2951] Generating trace-target_ppc.h with a custom command | |
[162/2951] Generating trace-target_sparc.h with a custom command | |
[163/2951] Generating hmp-commands.h with a custom command (wrapped by meson to capture output) | |
[164/2951] Generating trace-target_sparc.c with a custom command | |
[165/2951] Generating generated-tcg-tracers.h with a custom command | |
[166/2951] Generating generated-helpers.c with a custom command | |
[167/2951] Generating trace-migration.h with a custom command | |
[168/2951] Generating generated-helpers-wrappers.h with a custom command | |
[169/2951] Generating generated-helpers.h with a custom command | |
[170/2951] Generating module_block.h with a custom command | |
[171/2951] Generating block-gen.c with a custom command | |
[172/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_i32_r_minMag.c.o | |
[173/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_f32.c.o | |
[174/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_i64_r_minMag.c.o | |
[175/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_extF80M.c.o | |
[176/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_roundToInt.c.o | |
[177/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_sub.c.o | |
[178/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_f16.c.o | |
[179/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_mul.c.o | |
[180/2951] Generating qemu-options.def with a custom command (wrapped by meson to capture output) | |
[181/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_to_f64.c.o | |
[182/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_mulAdd.c.o | |
[183/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_add.c.o | |
[184/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_div.c.o | |
[185/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_rem.c.o | |
[186/2951] Compiling C object tests/fp/libsoftfloat.a.p/berkeley-softfloat-3_source_f128M_eq.c.o | |
[187/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-neon-ls.c.inc'. | |
[188/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-a32-uncond.c.inc'. | |
[189/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-vfp.c.inc'. | |
[190/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-vfp-uncond.c.inc'. | |
[191/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-t32.c.inc'. | |
[192/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-sve.c.inc'. | |
[193/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-t16.c.inc'. | |
[194/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-neon-shared.c.inc'. | |
[195/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-m-nocp.c.inc'. | |
[196/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-a32.c.inc'. | |
[197/2951] Generating 'libqemu-aarch64-softmmu.fa.p/decode-neon-dp.c.inc'. | |
[198/2951] Generating trace-events-all with a custom command (wrapped by meson to capture output) | |
[199/2951] Generating texture-blit-vert.h with a custom command (wrapped by meson to capture output) | |
[200/2951] Generating texture-blit-frag.h with a custom command (wrapped by meson to capture output) | |
[201/2951] Compiling C object vma.p/vma-reader.c.o | |
FAILED: vma.p/vma-reader.c.o | |
cc -Ivma.p -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -fdiagnostics-color=auto -pipe -Wall -Winvalid-pch -std=gnu99 -O2 -g -isystem /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/linux-headers -isystem linux-headers -iquote . -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/disas/libvixl -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tcg/i386 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/accel/tcg -pthread -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong -fPIE -MD -MQ vma.p/vma-reader.c.o -MF vma.p/vma-reader.c.o.d -o vma.p/vma-reader.c.o -c ../vma-reader.c | |
In file included from ../vma.h:18, | |
from ../vma-reader.c:21: | |
/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include/qapi/error.h:275:10: fatal error: qapi/qapi-types-error.h: No such file or directory | |
275 | #include "qapi/qapi-types-error.h" | |
| ^~~~~~~~~~~~~~~~~~~~~~~~~ | |
compilation terminated. | |
[202/2951] Generating texture-blit-flip-vert.h with a custom command (wrapped by meson to capture output) | |
[203/2951] Generating input-keymap-qcode-to-sun.c.inc with a custom command (wrapped by meson to capture output) | |
[204/2951] Generating input-keymap-usb-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[205/2951] Generating input-keymap-qnum-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[206/2951] Generating input-keymap-qcode-to-atset3.c.inc with a custom command (wrapped by meson to capture output) | |
[207/2951] Generating input-keymap-xorgkbd-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[208/2951] Compiling C object pbs-restore.p/pbs-restore.c.o | |
FAILED: pbs-restore.p/pbs-restore.c.o | |
cc -Ipbs-restore.p -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -fdiagnostics-color=auto -pipe -Wall -Winvalid-pch -std=gnu99 -O2 -g -isystem /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/linux-headers -isystem linux-headers -iquote . -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/disas/libvixl -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tcg/i386 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/accel/tcg -pthread -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong -fPIE -MD -MQ pbs-restore.p/pbs-restore.c.o -MF pbs-restore.p/pbs-restore.c.o.d -o pbs-restore.p/pbs-restore.c.o -c ../pbs-restore.c | |
In file included from ../pbs-restore.c:24: | |
/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include/qapi/error.h:275:10: fatal error: qapi/qapi-types-error.h: No such file or directory | |
275 | #include "qapi/qapi-types-error.h" | |
| ^~~~~~~~~~~~~~~~~~~~~~~~~ | |
compilation terminated. | |
[209/2951] Generating input-keymap-win32-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[210/2951] Generating input-keymap-qcode-to-linux.c.inc with a custom command (wrapped by meson to capture output) | |
[211/2951] Generating input-keymap-xorgevdev-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[212/2951] Generating input-keymap-qcode-to-atset1.c.inc with a custom command (wrapped by meson to capture output) | |
[213/2951] Generating input-keymap-qcode-to-qnum.c.inc with a custom command (wrapped by meson to capture output) | |
[214/2951] Generating input-keymap-qcode-to-atset2.c.inc with a custom command (wrapped by meson to capture output) | |
[215/2951] Generating input-keymap-linux-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[216/2951] Generating input-keymap-osx-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[217/2951] Generating input-keymap-xorgxwin-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[218/2951] Generating input-keymap-xorgxquartz-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[219/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/addrspace.c.o | |
[220/2951] Compiling C object vma.p/vma.c.o | |
FAILED: vma.p/vma.c.o | |
cc -Ivma.p -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -fdiagnostics-color=auto -pipe -Wall -Winvalid-pch -std=gnu99 -O2 -g -isystem /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/linux-headers -isystem linux-headers -iquote . -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/disas/libvixl -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/tcg/i386 -iquote /home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/accel/tcg -pthread -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-declaration -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wimplicit-fallthrough=2 -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-psabi -fstack-protector-strong -fPIE -MD -MQ vma.p/vma.c.o -MF vma.p/vma.c.o.d -o vma.p/vma.c.o -c ../vma.c | |
In file included from ../vma.h:18, | |
from ../vma.c:17: | |
/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/include/qapi/error.h:275:10: fatal error: qapi/qapi-types-error.h: No such file or directory | |
275 | #include "qapi/qapi-types-error.h" | |
| ^~~~~~~~~~~~~~~~~~~~~~~~~ | |
compilation terminated. | |
[221/2951] Generating input-keymap-atset1-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[222/2951] Generating x86_64-softmmu-gdbstub-xml.c with a custom command (wrapped by meson to capture output) | |
[223/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/download.c.o | |
[224/2951] Generating aarch64-softmmu-gdbstub-xml.c with a custom command (wrapped by meson to capture output) | |
[225/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/qemu_elf.c.o | |
[226/2951] Generating input-keymap-x11-to-qcode.c.inc with a custom command (wrapped by meson to capture output) | |
[227/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/pdb.c.o | |
[228/2951] Compiling C object contrib/elf2dmp/elf2dmp.p/main.c.o | |
[229/2951] Compiling C object subprojects/libvhost-user/libvhost-user.a.p/libvhost-user.c.o | |
[230/2951] Compiling C object contrib/ivshmem-client/ivshmem-client.p/ivshmem-client.c.o | |
[231/2951] Generating edk2-arm-vars.fd with a custom command (wrapped by meson to capture output) | |
[232/2951] Generating QAPI files for qemu-storage-daemon with a custom command | |
[233/2951] Generating shared QAPI source files with a custom command | |
[234/2951] Generating edk2-arm-code.fd with a custom command (wrapped by meson to capture output) | |
ninja: build stopped: subcommand failed. | |
make[3]: *** [Makefile:152: run-ninja] Error 1 | |
make[3]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0/build' | |
make[2]: *** [GNUmakefile:11: all] Error 2 | |
make[2]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' | |
make[1]: *** [debian/rules:87: build-stamp] Error 2 | |
make[1]: Leaving directory '/home/lae/build/pve-qemu/pve-qemu-kvm-6.0.0' | |
dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2 | |
make: *** [Makefile:36: pve-qemu-kvm_6.0.0-3_amd64.deb] Error 2 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment