Skip to content

Instantly share code, notes, and snippets.

@lamperez
Last active December 16, 2024 11:51
Show Gist options
  • Save lamperez/862763881c0e1c812392b5574727f6ff to your computer and use it in GitHub Desktop.
Save lamperez/862763881c0e1c812392b5574727f6ff to your computer and use it in GitHub Desktop.
CS35L41 amplifiers in an ASUS Zenbook on linux

Asus Zenbook UX3402 speakers on Linux

Important

THIS IS NOW OBSOLETE WITH KERNEL VERSIONS ≥ 6.7.0

A recent announcement in the kernel mail list by Cirrus developers will solve the problem described here. Therefore, the proposed solutions will be soon obsolete. See this comment (thanks, @flukejones, for the tip).

I got the speakers working on my Asus Zenbook 14 OLED UX3402, the one with Intel CPU and the two CS35L41 audio amplifiers connected over SPI (not the UM3402YA, with AMD and I²C). The amplifiers are supported by the snd_hda_scodec_cs35l41 module in recent kernel versions, but they require some model-specific configuration paramaters, that should be provided by the BIOS, via ACPI. Of course, they are missing. It seems that the Windows drivers have those parameters somehow hardcoded, instead of using ACPI (bad idea, but who am I to criticise). Since Asus has been nasty and refused/was not able to update the BIOS with the missing data, I have patched the ACPI tables myself.

Warning

As stated by Cirrus developers, if you try this there is a non-zero (low, I hope) possibility of blowing your speakers. Take into account that this procedure is not just configuring your box, it is hardware-level hacking with very scarce information about the hardware (thank you, ASUS, and thank you, Cirrus, for not publishing the CS35L41 datasheet and making it only available by request). Additionally, You should know how to work with DSDT or SSDT files (I have a brief guide here) and how to recover from a non booting system. You are on your own. You have been warned.

Note

I have used the patch for some months, and everything seems OK. As you can see, the most recent versions do not require electrical parameters to be specified, just providing the functions of several GPIO pins, that are already present in the original BIOS, and the behavior associated to them. I am almost sure that the patch is totally safe.

My BIOS is the most recent one (version 310). I have added two _DSD objects in the SSDT file (ssdt_csc3551.dsl, or its already assembled version, ssdt_csc3551.aml):

  • One inside the SPK1 device, providing the missing "cirrus,dev-index" and other properties, just like the I2C models. You can also provide these properties by patching the kernel module (the linux/sound/pci/hda/cs35l41_hda.c file).

  • Another one, after the SPK1 device, with the chip select GPIOs, "cs-gpios", required by the SPI bus (the somehow simpler I²C bus does not use chip select pins, but addresses). Without this _DSD object, only one amplifier can be addressed and activated. In this case, the driver refuses to load even for this single working amplifier.

Obsolete: DSDT patch

Instead of applying a SSDT file, you may patch the full DSDT dissassembled DSDT file (dsdt.dsl). This was my original solution (thanks to @thor2002ro for pointing to the simpler, nicer SSDT solution, see the comment, especially if you use grub). The patch is available for reference, just apply the SSDT file.

Obsolete: internal boost

I keep the old, original patch, that produced AMP short error messages when the volume was high enough, for reference. Please try first the simpler patch with external boost, that seems to work without flaws (thanks to @bdandy, see the comment).

Boot log

Output from journalctl -b -g CSC3551 --output short-monotonic after the old patch:

[5.358062] zenbook kernel: Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 SPI devices.
[5.643640] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
[5.680302] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
[5.996217] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Falling back to default firmware.
[5.996608] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware version: 3
[5.996611] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot.wmfw: Fri 24 Jun 2022 14:55:56 GMT Daylight Time
[6.069598] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.58.0, 2 algorithms
[6.070173] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: 0: ID cd v29.78.0 XM@94 YM@e
[6.070185] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: 1: ID f20b v0.1.0 XM@17c YM@0
[6.070192] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: e:\workspace\workspace\tibranch_release_playback_6.76_2\ormis\staging\default_tunings\internal\CS35L53\Fixed_Attenuation_Mono_48000_29.78.0\full\Fixed_Attenuation_Mono_48000_29.78.0_full.bin
[6.083485] zenbook kernel: snd_hda_codec_realtek ehdaudio0D0: bound spi1-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[6.083899] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Falling back to default firmware.
[6.083962] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware version: 3
[6.083966] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot.wmfw: Fri 24 Jun 2022 14:55:56 GMT Daylight Time
[6.145224] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.58.0, 2 algorithms
[6.145817] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: 0: ID cd v29.78.0 XM@94 YM@e
[6.145828] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: 1: ID f20b v0.1.0 XM@17c YM@0
[6.145834] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: e:\workspace\workspace\tibranch_release_playback_6.76_2\ormis\staging\default_tunings\internal\CS35L53\Fixed_Attenuation_Mono_48000_29.78.0\full\Fixed_Attenuation_Mono_48000_29.78.0_full.bin
[6.161484] zenbook kernel: snd_hda_codec_realtek ehdaudio0D0: bound spi1-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])

The "Falling back to default firmware" disappears if spk-id-gpios are provided (the block is commented in the patch). As a result, a different firmware is loaded, resulting in very low volume and strong distortion. If the new patch is used, that uses external boost, the sound is correct, and the log is

[0.004000] zenbook kernel: ACPI: Table Upgrade: install [SSDT-CUSTOM- CSC3551]
[0.004000] zenbook kernel: ACPI: SSDT 0x00000000368FD000 0001A0 (v01 CUSTOM CSC3551  00000001 INTL 20200925)
[5.607253] zenbook kernel: Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 SPI devices.
[5.906936] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
[5.907354] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset
[5.938136] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
[6.239406] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware version: 3
[6.239415] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431e02.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[6.313109] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[6.313524] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: 0: ID cd v29.63.1 XM@94 YM@e
[6.313530] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: 1: ID f20b v0.1.0 XM@176 YM@0
[6.313535] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\tyang\Desktop\Product Setting\SmartAMP\ASUS\ASUS_Zenbook\UX3402\Tuning Release\220304\ASUS_UX3402_L_tuning_IDYC_ReDc_PICL_RTL_0304.bin
[6.337211] zenbook kernel: snd_hda_codec_realtek ehdaudio0D0: bound spi1-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[6.337534] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware version: 3
[6.337540] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431e02.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[6.399070] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[6.399612] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: 0: ID cd v29.63.1 XM@94 YM@e
[6.399623] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: 1: ID f20b v0.1.0 XM@176 YM@0
[6.399629] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\tyang\Desktop\Product Setting\SmartAMP\ASUS\ASUS_Zenbook\UX3402\Tuning Release\220304\ASUS_UX3402_R_tuning_IDYC_ReDc_PICL_RTL_0304.bin
[6.427637] zenbook kernel: snd_hda_codec_realtek ehdaudio0D0: bound spi1-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
--- dsdt.dsl.old 2023-03-26 01:06:48.845795666 +0100
+++ dsdt.dsl 2023-03-26 12:00:45.643851841 +0200
@@ -18,7 +18,7 @@
* Compiler ID "INTL"
* Compiler Version 0x20200717 (538969879)
*/
-DefinitionBlock ("", "DSDT", 2, "_ASUS_", "Notebook", 0x01072009)
+DefinitionBlock ("", "DSDT", 2, "_ASUS_", "Notebook", 0x0107200A)
{
/*
* iASL Warning: There were 233 external control methods found during
@@ -90642,7 +90642,48 @@
Method (_DIS, 0, NotSerialized) // _DIS: Disable Device
{
}
+
+ Name (_DSD, Package () // _DSD: Device-Specific Data
+ {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package ()
+ {
+ Package () { "cirrus,dev-index", Package () { Zero, One }},
+ Package () { "reset-gpios", Package () {
+ SPK1, One, Zero, Zero,
+ SPK1, One, Zero, Zero,
+ } },
+ // Package () { "spk-id-gpios", Package () {
+ // SPK1, 0x02, Zero, Zero,
+ // SPK1, 0x02, Zero, Zero,
+ // } },
+ Package () { "cirrus,speaker-position", Package () { Zero, One } },
+ Package () { "cirrus,gpio1-func", Package () { Zero, Zero } },
+ Package () { "cirrus,gpio2-func", Package () { 0x02, 0x02 } },
+ // boost-type: 0 internal, 1 external
+ Package () { "cirrus,boost-type", Package () { Zero, Zero } },
+ // boost-peak-milliamp: 1600 to 4500, increments of 50 mA
+ Package () { "cirrus,boost-peak-milliamp", Package () { 4500, 4500 } },
+ // boost-ind-nanohenry: 1000 | 1200 | 1500 | 2200 nH
+ Package () { "cirrus,boost-ind-nanohenry", Package () { 1000, 1000 } },
+ // boost-cap-microfarad: rounded to the nearest integer
+ Package () { "cirrus,boost-cap-microfarad", Package () { 24, 24 } },
+ },
+ })
}
+
+ Name (_DSD, Package ()
+ {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package ()
+ {
+ Package () { "cs-gpios", Package () {
+ Zero, // Native CS
+ SPK1, Zero, Zero, Zero // GPIO CS
+ } }
+ }
+ })
+
}
Scope (_SB.PC00.LPCB)
--- dsdt.dsl.old 2023-03-26 01:06:48.845795666 +0100
+++ dsdt.dsl 2023-03-26 12:00:45.643851841 +0200
@@ -18,7 +18,7 @@
* Compiler ID "INTL"
* Compiler Version 0x20200717 (538969879)
*/
-DefinitionBlock ("", "DSDT", 2, "_ASUS_", "Notebook", 0x01072009)
+DefinitionBlock ("", "DSDT", 2, "_ASUS_", "Notebook", 0x0107200A)
{
/*
* iASL Warning: There were 233 external control methods found during
@@ -90642,7 +90642,43 @@
Method (_DIS, 0, NotSerialized) // _DIS: Disable Device
{
}
+
+ Name (_DSD, Package () // _DSD: Device-Specific Data
+ {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package ()
+ {
+ Package () { "cirrus,dev-index", Package () { Zero, One }},
+ Package () { "reset-gpios", Package () {
+ SPK1, One, Zero, Zero,
+ SPK1, One, Zero, Zero,
+ } },
+ Package () { "spk-id-gpios", Package () {
+ SPK1, 0x02, Zero, Zero,
+ SPK1, 0x02, Zero, Zero,
+ } },
+ Package () { "cirrus,speaker-position", Package () { Zero, One } },
+ // gpioX-func: 0 not used, 1 VPSK_SWITCH, 2: INTERRUPT, 3: SYNC
+ Package () { "cirrus,gpio1-func", Package () { One, One } },
+ Package () { "cirrus,gpio2-func", Package () { 0x02, 0x02 } },
+ // boost-type: 0 internal, 1 external
+ Package () { "cirrus,boost-type", Package () { One, One } },
+ },
+ })
}
+
+ Name (_DSD, Package ()
+ {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package ()
+ {
+ Package () { "cs-gpios", Package () {
+ Zero, // Native CS
+ SPK1, Zero, Zero, Zero // GPIO CS
+ } }
+ }
+ })
+
}
Scope (_SB.PC00.LPCB)
DefinitionBlock ("", "SSDT", 1, "CUSTOM", "CSC3551", 0x00000001)
{
External (_SB_.PC00.SPI0, DeviceObj)
External (_SB_.PC00.SPI0.SPK1, DeviceObj)
Scope (_SB.PC00.SPI0.SPK1)
{
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "cirrus,dev-index", Package () { Zero, One }},
Package () { "reset-gpios", Package () {
SPK1, One, Zero, Zero,
SPK1, One, Zero, Zero
} },
Package () { "spk-id-gpios", Package () {
SPK1, 0x02, Zero, Zero,
SPK1, 0x02, Zero, Zero
} },
Package () { "cirrus,speaker-position", Package () { Zero, One } },
// gpioX-func: 0 not used, 1 VPSK_SWITCH, 2: INTERRUPT, 3: SYNC
Package () { "cirrus,gpio1-func", Package () { One, One } },
Package () { "cirrus,gpio2-func", Package () { 0x02, 0x02 } },
// boost-type: 0 internal, 1 external
Package () { "cirrus,boost-type", Package () { One, One } }
}
})
}
Scope (_SB.PC00.SPI0)
{
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "cs-gpios", Package () {
Zero, // Native CS
SPK1, Zero, Zero, Zero // GPIO CS
} }
}
})
}
}
@dorian-cruveiller
Copy link

HI, i have another laptop using this chip and is connected in I2C. Everything works great except when rebooting, i have the the following error:

Failed waiting for OTP_BOOT_DONE: -121

I tried to change reset-gpios like this:

Package () { "reset-gpios", Package () {
    SPKR, One, Zero, Zero,
    SPKR, One, Zero, Zero
} },

I also tried 0x02 and 0x03 but none of these work when rebooting.

Any help would be very appreciated.

@socketpair
Copy link

socketpair commented Jan 6, 2024

YAY!
UX3402ZA.310
Sound works! Just upgraded to Fedora 39 (and upgraded to the latest kernel within + all packages), and did nothing!

Did not upgrade BIOS (vendor did not make update).

Kernel 6.6.8-200.fc39.x86_64
linux-firmware-20231211-1.fc39.noarch

$ dmesg | grep  cs
[108004.282525] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: Firmware version: 3
[108004.282533] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431e02.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[108004.423081] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[108004.425027] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431e02-spkid1-l0.bin: v0.43.1
[108004.425029] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\tyang\Desktop\Product Setting\SmartAMP\ASUS\ASUS_Zenbook\UX3402\Tuning Release\220304\ASUS_UX3402_L_tuning_IDYC_ReDc_PICL_RTL_0304.bin

Before:

$ journalctl -b -1 | fgrep cs35
дек 20 08:12:28 asus kernel: cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Failed property cirrus,dev-index: -22
дек 20 08:12:28 asus kernel: cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: error -EINVAL: Platform not supported
дек 20 08:12:28 asus kernel: cs35l41-hda: probe of spi0-CSC3551:00-cs35l41-hda.0 failed with error -22
дек 20 08:12:28 asus kernel: cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Failed property cirrus,dev-index: -22
дек 20 08:12:28 asus kernel: cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: error -EINVAL: Platform not supported
дек 20 08:12:28 asus kernel: cs35l41-hda: probe of spi0-CSC3551:00-cs35l41-hda.1 failed with error -22

Even more before:

$ journalctl -b -5 | fgrep cs35
ноя 27 17:07:44 asus kernel: cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Error: ACPI _DSD Properties are missing for HID CSC3551.
ноя 27 17:07:44 asus kernel: cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: error -EINVAL: Platform not supported
ноя 27 17:07:44 asus kernel: cs35l41-hda: probe of spi0-CSC3551:00-cs35l41-hda.0 failed with error -22
ноя 27 17:07:44 asus kernel: cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Error: ACPI _DSD Properties are missing for HID CSC3551.
ноя 27 17:07:44 asus kernel: cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: error -EINVAL: Platform not supported
ноя 27 17:07:44 asus kernel: cs35l41-hda: probe of spi0-CSC3551:00-cs35l41-hda.1 failed with error -22

@socketpair
Copy link

But by feelings, volume is not enough. I don't have Windows, so I can not compare. I know everything this is about amplifier and some secret coefficients.

@dabendji2000
Copy link

dabendji2000 commented Jan 6, 2024

@socketpair I had the same issue on my Zenbook UM3402YAR - meaning that when I finally was able to get the sound working (and that was only yesterday after three months of trial and error) the sound was lower than it should be normally. The solution was to grab the files from my windows partition and to rename them into the linux naming convention for my soundcard by using the rename script and then to copy them to /lib/firmware/cirrus directory.
After restart I was able to get the sound on Nobara 39 as it should be.

Since you do not have windows you need to get the files from either someone else who has the same machine as you do and has windows installed or from the Realtek website.

@socketpair
Copy link

socketpair commented Jan 6, 2024

Sometimes (I don't know, what triggers) the following happens:

[533077.684431] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: Failed to read 256 bytes from 2800608: -16
[534920.946475] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: Failed to read 256 bytes from 2800608: -16
[536684.320479] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: Failed to read 256 bytes from 2800608: -16

@kenzoi
Copy link

kenzoi commented Jan 6, 2024

Thanks all for this valuable information resources.

I have a Zenbook UX3402VA without patches since audio is a non-essential to my work and I was waiting for a native BIOS or kernel solution. So when I saw the news I got very excited about the new kernel patches of Kernel 6.7, but sadly testing the latest kernel-6.7.0-0.rc8 using Fedora Rawhide I don't have sound yet on this model.

I'm not sure because I'm not very familiar with low level code or C, but as others have mentioned the possibility, apparently this model is missing on cs35l41_config_table and cs35l41_prop_model_table on kernel > sound > pci > hda > cs35l41_hda_property.c. I used this command lspci -vn which gave me the subsystem id 1043:16a3, which is not included. (I'm assuming that the number at that table are subsystem ids of course)

I didn't have the knowledge or time to get what values should have the cs35l41_config_table.
I'll try to learn more about, but due of my lack of knowledge on this matter I may fallback to a LTS kernel + dsd patching until someone get a solution or continue living without sound.

@Da-Viper
Copy link

Da-Viper commented Jan 8, 2024

@dorian-cruveiller did this work for Lenovo slim 7 16aph8 ?

@phaserblast
Copy link

To those suffering the low audio volume issue with the new 6.7 kernel fix, this is what worked for me. All I needed to do was create two symlinks to a file in /lib/firmware/cirrus/cs35l41 (my machine is a GV302XA, id 1043:1533). Note that both of these links point to the same file:

ln -s /lib/firmware/cirrus/cs35l41/v6.61.1/halo_cspl_RAM_revB2_29.63.1.wmfw /lib/firmware/cirrus/cs35l41-dsp1-spk-prot-10431533.wmfw
ln -s /lib/firmware/cirrus/cs35l41/v6.61.1/halo_cspl_RAM_revB2_29.63.1.wmfw /lib/firmware/cirrus/cs35l41-dsp1-spk-cali-10431533.wmfw

Ensure your links contain the machine ID in the file name. I think the Cirrus kernel module looks for these files, and if it doesn't find them you get the dreaded "Falling back to default firmware" note in dmesg. With the symlinks, I don't get the "default firmware" message anymore and the volume can get much louder!

@Dertosh
Copy link

Dertosh commented Jan 8, 2024

Thanks to you all I got sound working on UM3504DA (Asus Zenbook 15 OLED)!

My dsl file looks like this:

DefinitionBlock ("", "SSDT", 1, "CUSTOM", "CS3551", 0x0000300A)
{

    External (_SB_.I2CB, DeviceObj)
    External (_SB_.I2CB.SPKR, DeviceObj)

    Scope (_SB.I2CB.SPKR)
    {
        Method (_DSD, 0, NotSerialized)  // _DSD: Device Specific Data
        {
            Return (Package ()
                {
                    ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
                    Package ()
                    {
                        Package () { "cirrus,dev-index", Package () { 0x0040, 0x0041 }},
                        Package () { "reset-gpios", Package () {
                           SPKR, One, Zero, Zero,
                           SPKR, One, Zero, Zero
                        } },
                        Package () { "spk-id-gpios", Package () {
                             SPKR, 0x02, Zero, Zero,
                             SPKR, 0x02, Zero, Zero,
                        } },
                        Package () { "cirrus,speaker-position", Package () { Zero, One } },
                        Package () { "cirrus,gpio1-func", Package () { One, One } },
                        Package () { "cirrus,gpio2-func", Package () { 0x02, 0x02 } },
                        // boost-type: 0 internal, 1 external
                        Package () { "cirrus,boost-type", Package () { One, One } },
                        // boost-peak-milliamp: 1600 to 4500, increments of 50 mA
                        //Package () { "cirrus,boost-peak-milliamp",  Package () { 3000, 3000 } },
                        // boost-ind-nanohenry: 1000 | 1200 | 1500 | 2200 nH
                        //Package () { "cirrus,boost-ind-nanohenry",  Package () { 1000, 1000 } },
                        // boost-cap-microfarad: rounded to the nearest integer
                        //Package () { "cirrus,boost-cap-microfarad", Package () { 15, 15 } },
                    }
                }) /* \_SB.I2CB.SPKR._DSD */
        }
    }

    Scope (_SB.I2CB)
    {
        Method (_DSD, 0, NotSerialized)  // _DSD: Device Specific Data
        {
            Return (Package ()
                {
                    ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
                    Package ()
                    {
                        Package () { "cs-gpios", Package () { 
                            Zero,                    // Native CS
                            SPKR, Zero, Zero, Zero   // GPIO CS
                        } }
                    }
                }) /* \_SB.I2CB.SPKR._DSD */
        }
    }
}

I had to add SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS UM3504DA", ALC287_FIXUP_CS35L41_I2C_2), to static const struct snd_pci_quirk alc269_fixup_tbl at line 9500 in file sound/pci/hda/patch_realtek.c and compile linux 6.6.2 kernel (never did it before).

In 6.7 there's ALC294_FIXUP_CS35L41_I2C_2 which appears to do the same as ALC287_FIXUP_CS35L41_I2C_2. UM3504 has ALC294 by the way.

Is there anything I can do to make SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS UM3504DA", ALC294_FIXUP_CS35L41_I2C_2), appear in source code of the linux kernel so that I never have to compile it again?

Thank you, it's work for me! ASUSTeK COMPUTER INC. Zenbook 15 UM3504DA_UM3504DA Linux 6.6.8-2-MANJARO

@SergioASantosF
Copy link

First of all, I would like to thank everyone who made this happen, without your time diving in to solve this issue, this solution would not be possible!! I installed EndeavourOS today and on the kernel version it was on when installed (6.6.10), the sound didn't work without a patch. However, after compiling the latest version of the mainline kernel 6.7.0, and rebooting, the sound worked without any modifications, natively.

I used this laptop - UX3402ZA (Bios 310) throughout the year with Windows, and the times I tested the patches on Linux, the sound only came from one side, it was low, but it was already a path towards a solution, which made me very happy. However, using it like that made me go back to Windows to avoid damaging the speaker and wait, until I could extract 100% from the laptop (which isn't very cheap here in Brazil).

But now, after this kernel update, the sound is loud, not as loud as Windows, which could reach a level where it distorted the sound, sometimes losing quality. But on Linux, it's loud and at a level where the sound is perfect, it doesn’t distort, meaning, it's at an ideal maximum sound level for the speakers.

Again, many thanks to everyone involved who made it happen, now it's just a matter of waiting as the distros update their kernel and soon it will be resolved for most of the machines we use.

THANK YOU!

@plamen-kolev
Copy link

Thanks all for this valuable information resources.

I have a Zenbook UX3402VA without patches since audio is a non-essential to my work and I was waiting for a native BIOS or kernel solution. So when I saw the news I got very excited about the new kernel patches of Kernel 6.7, but sadly testing the latest kernel-6.7.0-0.rc8 using Fedora Rawhide I don't have sound yet on this model.

I'm not sure because I'm not very familiar with low level code or C, but as others have mentioned the possibility, apparently this model is missing on cs35l41_config_table and cs35l41_prop_model_table on kernel > sound > pci > hda > cs35l41_hda_property.c. I used this command lspci -vn which gave me the subsystem id 1043:16a3, which is not included. (I'm assuming that the number at that table are subsystem ids of course)

I didn't have the knowledge or time to get what values should have the cs35l41_config_table. I'll try to learn more about, but due of my lack of knowledge on this matter I may fallback to a LTS kernel + dsd patching until someone get a solution or continue living without sound.

Sad to hear, hope someone tackles this in the near future

@anthonyryan1
Copy link

anthonyryan1 commented Jan 10, 2024

Also no luck with the ASUS UM3402Y on kernel 6.7 with all the cs35l41 options enabled in the kernel, apparently more tinkering needed.

(Interestingly, in spite of the physical label on the device listing UM3402Y, the software internally says UM3402YA. I suspect those are the same model.)

@AlexeyPashnin1
Copy link

AlexeyPashnin1 commented Jan 11, 2024

@staropram Hi! It's me, the guy who doesn't have anything working. After the system stopped booting, I got upset and put the laptop in the pantry. But now I have made one more attempt to fix the sound before abandoning the laptop altogether.

Following the instructions and your advice, I tried to install kernel versions 6.6.11 and 6.7, but it didn't help. The sound is still only in the headphones.

Tell me, please, is there any other chance or way that I can try? So far, this thread is the only clue for me, because I tried everything else on the Internet and it didn't help.

Here are the outputs that you asked me earlier:

$ inxi -MA

Machine:
Type: Laptop System: ASUSTeK product: Zenbook UX3402VA_UX3402VA v: 1.0
serial:
Mobo: ASUSTeK model: UX3402VA v: 1.0 serial:
UEFI: American Megatrends LLC. v: UX3402VA.302 date: 05/23/2023
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS driver: sof-audio-pci-intel-tgl
API: ALSA v: k6.5.0-14-generic status: kernel-api
Server-1: PipeWire v: 0.3.79 status: active

sudo dmesg | grep CSC

[ 2.045365] Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 SPI devices.
[ 2.677091] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Error: ACPI _DSD Properties are missing for HID CSC3551.
[ 2.677107] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: error -EINVAL: Platform not supported
[ 2.677115] cs35l41-hda: probe of spi0-CSC3551:00-cs35l41-hda.0 failed with error -22
[ 2.677616] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Error: ACPI _DSD Properties are missing for HID CSC3551.
[ 2.677620] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: error -EINVAL: Platform not supported
[ 2.677623] cs35l41-hda: probe of spi0-CSC3551:00-cs35l41-hda.1 failed with error -22

uname -a

Linux alex 6.5.0-14-generic #14-Ubuntu SMP PREEMPT_DYNAMIC Tue Nov 14 14:59:49 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux

I would appreciate any help. Thank you!

@lamperez
Copy link
Author

lamperez commented Jan 11, 2024

@AlexeyPashnin1 Not exactly a solution to your problem, but for reference: if you want to check if your laptop model is supported in the latest kernel version, first get the vendor and model ID:

udevadm info /sys/bus/pci/devices/0000:00:00.0 | grep PCI_SUBSYS_ID

That gives me (Asus Zenbook UX3402ZA)

E: PCI_SUBSYS_ID=1043:1E02

Then, just look for the ID in the kernel source, here and here, without the colon.

Also, I suppose that these are the places to patch the kernel to support a model that is not yet included.

@kenzoi
Copy link

kenzoi commented Jan 12, 2024

Yesterday I took some time to read again the new kernel tables, the working SSDT patch published here for the Asus Zenbook UX3402VA and those instructions at asus-linux.org, downloaded the latest kernel source and made a patch adding the a new entry for UX3402VA model and now the audio is working correctly, I have been using it all day and I didn't detected any problem.

I didn't know how to find the nanohenry, microfarad, and milliamp values, but then I read these are just for the models that have the INTERNAL boost_type, then we just need to leave these values as 0. So for this model the entry is really the same as the UX3402ZA just changing the vendor and model ID.

I've just submitted the patch to the maintainer list.
Thank you all very much! Thank you @lamperez ! I'm really happy that I finally have the audio working.

Edit: the table must be sorted by SSID.

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index c1afb721b4c6..9ec5773e580e 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -54,6 +54,7 @@ static const struct cs35l41_config cs35l41_config_table[] = {
 	{ "10431533", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431573", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "10431663", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
+	{ "104316A3", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "104316D3", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "104316F3", SPI, 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "104317F3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
@@ -358,6 +359,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "10431533", generic_dsd_config },
 	{ "CSC3551", "10431573", generic_dsd_config },
 	{ "CSC3551", "10431663", generic_dsd_config },
+	{ "CSC3551", "104316A3", generic_dsd_config },
 	{ "CSC3551", "104316D3", generic_dsd_config },
 	{ "CSC3551", "104316F3", generic_dsd_config },
 	{ "CSC3551", "104317F3", generic_dsd_config },
-- 
2.43.0

@lamperez
Copy link
Author

@kenzoi you are welcome. Glad to be helpful.

@AlexeyPashnin1
Copy link

@lamperez Hi! I get this output
PCI_SUBSYS_ID=1043:16A3

and it seems that the model isn't supported
104316A3

It's a pity. I didn't think that in 2024 the operating system might not support sound.

Anyway, thanks for the help!
cc @staropram

@kenzoi
Copy link

kenzoi commented Jan 13, 2024

@AlexeyPashnin1 we have the same model, check my last comment if you want to try a patch for the kernel 6.7, it's just 2 lines.
The patch was already submitted, such small change I hope won't take much time to get merged into mainline.

@lamperez
Copy link
Author

AlexeyPashnin1: It is not the operative system, it is the vendor the one to blame.

@AlexeyPashnin1
Copy link

@kenzoi Hi! Thank you, but still no luck. But it may very well be that I'm not doing something completely, because when I execute a command uname -a, I get this output

Linux alex 6.5.0-14-generic #14-Ubuntu SMP PREEMPT_DYNAMIC Tue Nov 14 14:59:49 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux

Where the 6.5.0-14-generic version is indicated and not the 6.7.

I've downloaded the archive from https://kernel.org/ and and installed it according to the instructions https://itsfoss.com/compile-linux-kernel/.

It's probably important to note that I only got to the line make -j$(nproc) 2>&1 | tee log

Did I miss any mandatory actions that caused the kernel not to update?

@AlexeyPashnin1
Copy link

@lamperez well, I got Ubuntu from ubuntu.com, so the vendor is official :)

@lamperez
Copy link
Author

@AlexeyPashnin1 How funny, haha. The computer vendor, the one that builds and sells hardware without its specifications, or following the standards.

@AlexeyPashnin1
Copy link

@lamperez sorry, I didn't know Asus didn't follow the standards

@lamperez
Copy link
Author

@AlexPashnin1 Just read the thread from the beginning, the amplifier parameters are not provided anywhere by ASUS. The almost 30 years old standard way to describe a PC hardware configuration exposed to an operative system is the ACPI, that means "Advanced Configuration and Power Interface". And ASUS just keeps a hole in some of the vital configuration, that we have to guess and patch at boot, or alternatively it must be hardcoded in the kernel module (or Windows driver), something that is done several years after the hardware is in the market. Not very standard, if you ask me.

@AlexeyPashnin1
Copy link

@lamperez well, then I chose the wrong vendor and wasn't ready to edit the kernel to adjust the sound :) Now I will keep this in mind when choosing the next laptop.

Thank you, anyway, for your time.

@Mikchel
Copy link

Mikchel commented Jan 15, 2024

Alexey, you are right. It was surprise for me that quite expensive ASUS ROG laptop has so strange sound problems. That was very surprise for me. And i won't suggest anybody to get ASUS's laptops. Quite bad commercial for big company.

@FrankKipf
Copy link

Keep in mind, that Lenovo Legion series - highend gaming laptop like Asus ROG - suffers the same problem. They use the same Cirruslogic-chips and Lenovo has like Asus "forgotten" to provide the infos via ACPI / Bios. I can't tell you how much this f.... me up.

@BuenGenio
Copy link

Could any of this be re-used to enable the second pair of bass speakers on a Dell XPS 15 9530, which also uses the same chip?
Thanks!

@alexVinarskis
Copy link

alexVinarskis commented Jan 16, 2024

Could any of this be re-used to enable the second pair of bass speakers on a Dell XPS 15 9530, which also uses the same chip?
Thanks!

TL:DR; already done, coming in 6.8

Me and some other community members did it, but even though we submitted the patch, Cirrus changed their framework, and right after added their own support for xps 9530. They also just merged firmware/tuning files few days back. XPS 9530 also has a firmware bug which caps SPI speed, and thus firmware loading wouldve take ~3mins. I made a patch and it got accepted, should be coming in 6.8

Edit: most of development happened here on discord server

@isle9
Copy link

isle9 commented Jan 20, 2024

I've just submitted the patch to the maintainer list.

@kenzoi Any idea when this will be available?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment