Skip to content

Instantly share code, notes, and snippets.

@larstobi
Created June 15, 2014 16:15
Show Gist options
  • Save larstobi/8b7000b4263106a0bc8e to your computer and use it in GitHub Desktop.
Save larstobi/8b7000b4263106a0bc8e to your computer and use it in GitHub Desktop.
### hostapd configuration file
ctrl_interface=/var/run/hostapd
interface=wlan0
driver=nl80211
bridge=br0
### IEEE 802.11
ssid=new2
hw_mode=a
channel=0
max_num_sta=128
auth_algs=1
disassoc_low_ack=1
### DFS
ieee80211h=1
ieee80211d=1
country_code=NO
### IEEE 802.11n
ieee80211n=1
ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]
### IEEE 802.11ac
ieee80211ac=1
vht_oper_chwidth=1
vht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP7][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]
### WPA/IEEE 802.11i
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_passphrase=password
wpa_pairwise=TKIP CCMP
rsn_pairwise=CCMP
### Wi-Fi Protected Setup (WPS)
wps_state=2
ap_setup_locked=0
wps_pin_requests=/var/run/hostapd_wps_pin_requests
device_name=QCA Access Point
manufacturer=Qualcomm Atheros
device_type=6-0050F204-1
config_methods=virtual_push_button physical_push_button label keypad virtual_display
pbc_in_m1=1
ap_pin=12345670
upnp_iface=br0
eap_server=1
### hostapd event logger configuration
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
### WMM
wmm_enabled=1
uapsd_advertisement_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
### TX queue parameters
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment