Skip to content

Instantly share code, notes, and snippets.

@latsku

latsku/kernel.log

Created December 13, 2014 19:18
Show Gist options
  • Save latsku/a3c55cdeb02c4700c1c5 to your computer and use it in GitHub Desktop.
Save latsku/a3c55cdeb02c4700c1c5 to your computer and use it in GitHub Desktop.
Download ZIP
VoCore kernel log
Raw
kernel.log
[ 0.000000] Linux version 3.14.18 (vonger@Vongers-MacBook-Pro.local) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42586) ) #15 Wed Sep 24 11:18:53 CST 2014
[ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
[ 0.000000] MIPS: machine is VoCore
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802b6400, node_mem_map 81005100
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=0000965a
[ 0.000000] Readback ErrCtl register=0000965a
[ 0.000000] Memory: 29212K/32768K available (2284K kernel code, 119K rwdata, 456K rodata, 140K init, 180K bss, 3556K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 360MHz
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] genirq: Flags mismatch irq 7. 00014600 (timer) vs. 00014600 (systick)
[ 0.010000] Calibrating delay loop... 479.23 BogoMIPS (lpj=2396160)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090000] pinctrl core: initialized pinctrl subsystem
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] rt2880-pinmux pinctrl.1: try to register 28 pins ...
[ 0.100000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[ 0.100000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[ 0.100000] pinctrl core: add 3 pinmux maps
[ 0.100000] rt2880-pinmux pinctrl.1: found group selector 4 for jtag
[ 0.100000] rt2880-pinmux pinctrl.1: found group selector 2 for uartf
[ 0.100000] rt2880-pinmux pinctrl.1: found group selector 5 for led
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 17 (io17) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 18 (io18) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 19 (io19) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 20 (io20) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 21 (io21) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 7 (io7) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 8 (io8) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 9 (io9) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 10 (io10) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 11 (io11) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 12 (io12) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 13 (io13) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 14 (io14) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 22 (io22) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 23 (io23) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 24 (io24) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 25 (io25) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: request pin 26 (io26) for pinctrl.1
[ 0.100000] rt2880-pinmux pinctrl.1: failed to lookup the sleep state
[ 0.120000] bio: create slab <bio-0> at 0
[ 0.120000] rt2880_gpio 10000600.gpio: registering 22 gpios
[ 0.130000] rt2880_gpio 10000600.gpio: registering 22 irq handlers
[ 0.130000] rt2880_gpio 10000660.gpio: registering 6 gpios
[ 0.140000] rt2880_gpio 10000660.gpio: registering 6 irq handlers
[ 0.150000] Switched to clocksource systick
[ 0.150000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.190000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.190000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.220000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 0.250000] rt-timer 10000100.timer: maximum frequency is 7324Hz
[ 0.270000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[ 0.270000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.330000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.330000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.360000] msgmni has been set to 57
[ 0.360000] io scheduler noop registered
[ 0.380000] io scheduler deadline registered (default)
[ 0.380000] rt2880-pinmux pinctrl.1: request pin 0 (io0) for pio:0
[ 0.380000] rt2880-pinmux pinctrl.1: request pin 7 (io7) for pio:7
[ 0.380000] rt2880-pinmux pinctrl.1: request pin 8 (io8) for pio:8
[ 0.380000] rt2880-pinmux pinctrl.1: request pin 9 (io9) for pio:9
[ 0.380000] rt2880-pinmux pinctrl.1: request pin 12 (io12) for pio:12
[ 0.390000] rt2880-pinmux pinctrl.1: request pin 13 (io13) for pio:13
[ 0.390000] rt2880-pinmux pinctrl.1: request pin 14 (io14) for pio:14
[ 0.390000] rt2880-pinmux pinctrl.1: request pin 17 (io17) for pio:17
[ 0.390000] rt2880-pinmux pinctrl.1: request pin 18 (io18) for pio:18
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 19 (io19) for pio:19
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 20 (io20) for pio:20
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 21 (io21) for pio:21
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 22 (io22) for pio:22
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 23 (io23) for pio:23
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 24 (io24) for pio:24
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 25 (io25) for pio:25
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 26 (io26) for pio:26
[ 0.400000] gpio-export gpio-export.4: 17 gpio(s) exported
[ 0.420000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.430000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[ 0.430000] pinctrl core: add 1 pinmux maps
[ 0.430000] rt2880-pinmux pinctrl.1: found group selector 3 for uartlite
[ 0.430000] rt2880-pinmux pinctrl.1: request pin 15 (io15) for 10000c00.uartlite
[ 0.430000] rt2880-pinmux pinctrl.1: request pin 16 (io16) for 10000c00.uartlite
[ 0.430000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
[ 0.450000] console [ttyS0] enabled
[ 0.470000] bootconsole [early0] disabled
[ 0.490000] pinctrl core: add 1 pinmux maps
[ 0.490000] pinctrl core: add 1 pinmux maps
[ 0.490000] rt2880-pinmux pinctrl.1: found group selector 1 for spi
[ 0.490000] rt2880-pinmux pinctrl.1: found group selector 6 for spi_cs1
[ 0.490000] rt2880-pinmux pinctrl.1: request pin 3 (io3) for 10000b00.spi
[ 0.490000] rt2880-pinmux pinctrl.1: request pin 4 (io4) for 10000b00.spi
[ 0.490000] rt2880-pinmux pinctrl.1: request pin 5 (io5) for 10000b00.spi
[ 0.490000] rt2880-pinmux pinctrl.1: request pin 6 (io6) for 10000b00.spi
[ 0.490000] rt2880-pinmux pinctrl.1: request pin 27 (io27) for 10000b00.spi
[ 0.490000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
[ 0.510000] m25p80 spi32766.0: unique id: D262481697441623
[ 0.510000] 4 ofpart partitions found on MTD device spi32766.0
[ 0.530000] Creating 4 MTD partitions on "spi32766.0":
[ 0.530000] 0x000000000000-0x000000030000 : "uboot"
[ 0.550000] 0x000000030000-0x000000040000 : "uboot-env"
[ 0.570000] 0x000000040000-0x000000050000 : "factory"
[ 0.570000] 0x000000050000-0x000001000000 : "firmware"
[ 0.600000] 0x00000015059f-0x000001000000 : "rootfs"
[ 0.600000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.630000] mtd: device 4 (rootfs) set to be root filesystem
[ 0.650000] mtd: partition "rootfs_data" created automatically, ofs=0x3d0000, len=0xc30000
[ 0.670000] 0x0000003d0000-0x000001000000 : "rootfs_data"
[ 0.690000] eth0: done loading
[ 0.690000] rt3xxx-usbphy usbphy.3: loaded
[ 0.710000] rt2880_wdt 10000120.watchdog: Initialized
[ 0.710000] TCP: cubic registered
[ 0.730000] NET: Registered protocol family 17
[ 0.730000] 8021q: 802.1Q VLAN Support v1.8
[ 0.760000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 0.780000] Freeing unused kernel memory: 140K (802cd000 - 802f0000)
[ 6.610000] usbcore: registered new interface driver usbfs
[ 6.630000] usbcore: registered new interface driver hub
[ 6.650000] usbcore: registered new device driver usb
[ 6.670000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.670000] ehci-platform: EHCI generic platform driver
[ 7.090000] rt3xxx-usbphy usbphy.3: remote usb device wakeup disabled
[ 7.110000] rt3xxx-usbphy usbphy.3: UTMI 16bit 30MHz
[ 7.110000] ehci-platform 101c0000.ehci: EHCI Host Controller
[ 7.130000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[ 7.130000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[ 7.170000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[ 7.190000] usb usb1: no of_node; not parsing pinctrl DT
[ 7.190000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[ 7.190000] hub 1-0:1.0: USB hub found
[ 7.190000] hub 1-0:1.0: 1 port detected
[ 7.210000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.230000] ohci-platform: OHCI generic platform driver
[ 7.230000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[ 7.250000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[ 7.270000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[ 7.330000] usb usb2: no of_node; not parsing pinctrl DT
[ 7.330000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[ 7.330000] hub 2-0:1.0: USB hub found
[ 7.350000] hub 2-0:1.0: 1 port detected
[ 7.350000] rt2880-pinmux pinctrl.1: request pin 10 (io10) for pio:10
[ 7.350000] rt2880-pinmux pinctrl.1: request pin 11 (io11) for pio:11
[ 8.460000] rt305x-esw 10110000.esw: link changed 0x00
[ 8.680000] random: mktemp urandom read with 79 bits of entropy available
[ 12.520000] jffs2: notice: (315) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 0 orphan) found.
[ 15.110000] NET: Registered protocol family 10
[ 15.140000] tun: Universal TUN/TAP device driver, 1.6
[ 15.140000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 15.170000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
[ 15.200000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.230000] pinctrl core: add 1 pinmux maps
[ 15.230000] rt2880-pinmux pinctrl.1: found group selector 0 for i2c
[ 15.230000] rt2880-pinmux pinctrl.1: request pin 1 (io1) for 10000900.i2c
[ 15.230000] rt2880-pinmux pinctrl.1: request pin 2 (io2) for 10000900.i2c
[ 15.230000] i2c-ralink 10000900.i2c: loaded
[ 15.230000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 15.230000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 15.230000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.230000] xt_time: kernel timezone is -0000
[ 15.230000] cfg80211: Calling CRDA to update world regulatory domain
[ 15.230000] cfg80211: World regulatory domain updated:
[ 15.230000] cfg80211: DFS Master region: unset
[ 15.230000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.230000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.230000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.230000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.230000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.560000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 15.570000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 15.590000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.610000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 15.710000] PPP generic driver version 2.4.2
[ 15.710000] NET: Registered protocol family 24
[ 15.780000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected
[ 15.800000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected
[ 15.800000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 24.220000] random: nonblocking pool is initialized
[ 28.340000] device eth0.1 entered promiscuous mode
[ 28.340000] device eth0 entered promiscuous mode
[ 28.340000] br-lan: port 1(eth0.1) entered forwarding state
[ 28.340000] br-lan: port 1(eth0.1) entered forwarding state
[ 30.340000] br-lan: port 1(eth0.1) entered forwarding state
[ 31.460000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.470000] device wlan0 entered promiscuous mode
[ 31.510000] br-lan: port 2(wlan0) entered forwarding state
[ 31.510000] br-lan: port 2(wlan0) entered forwarding state
[ 31.530000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.510000] br-lan: port 2(wlan0) entered forwarding state
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment