Created
April 30, 2015 16:14
-
-
Save leon-anavi/18d5bc67653bd9cd6822 to your computer and use it in GitHub Desktop.
Tizen:Common Boot Logs from Freescale i.MX6
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2013.10-rc4 (Apr 30 2015 - 13:15:18) | |
| Boot Device: SD1 | |
| spl: error reading image u-boot.img, err - -1 | |
| Load image from RAW... | |
| U-Boot 2013.10-rc4 (Apr 30 2015 - 13:15:18) | |
| CPU: Freescale i.MX6Q rev1.5 at 792 MHz | |
| Reset cause: POR | |
| Board: MX6-HummingBoard | |
| DRAM: 1 GiB | |
| MMC: FSL_SDHC: 0 | |
| *** Warning - bad CRC, using default environment | |
| In: serial | |
| Out: vga | |
| Err: vga | |
| Net: FEC [PRIME] | |
| (Re)start USB... | |
| USB0: USB EHCI 1.00 | |
| scanning bus 0 for devices... 3 USB Device(s) found | |
| scanning usb for storage devices... 0 Storage Device(s) found | |
| scanning usb for ethernet devices... 0 Ethernet Device(s) found | |
| Hit any key to stop autoboot: 3 2 1 0 | |
| mmc0 is current device | |
| ** Unable to read file /boot.scr ** | |
| 123 bytes read in 9 ms (12.7 KiB/s) | |
| Importing environment from mmc0 ... | |
| 6143128 bytes read in 285 ms (20.6 MiB/s) | |
| Booting from mmc ... | |
| 33676 bytes read in 17 ms (1.9 MiB/s) | |
| Loaded imx6q-hummingboard.dtb | |
| Booting zImage | |
| Kernel image @ 0x10800000 [ 0x000000 - 0x5dbc98 ] | |
| ## Flattened Device Tree blob at 18000000 | |
| Booting using the fdt blob at 0x18000000 | |
| Using Device Tree in place at 18000000, end 1800b38b | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Initializing cgroup subsys cpuset | |
| [ 0.000000] Initializing cgroup subsys cpu | |
| [ 0.000000] Initializing cgroup subsys cpuacct | |
| [ 0.000000] Linux version 3.14.14+g4a2f77e (leon@leon-desktop-G1) (gcc version 4.9.1 (GCC) ) #1 SMP Thu Apr 30 15:40:08 EEST 2015 | |
| [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d | |
| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| [ 0.000000] Machine model: SolidRun HummingBoard Dual/Quad | |
| [ 0.000000] cma: CMA: reserved 256 MiB at 40000000 | |
| [ 0.000000] Memory policy: Data cache writealloc | |
| [ 0.000000] PERCPU: Embedded 8 pages/cpu @af758000 s9984 r8192 d14592 u32768 | |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 | |
| [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 | |
| [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| [ 0.000000] allocated 2097152 bytes of page_cgroup | |
| [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
| [ 0.000000] Memory: 763152K/1048576K available (7462K kernel code, 388K rwdata, 2780K rodata, 365K init, 533K bss, 285424K reserved, 0K highmem) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
| [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB) | |
| [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) | |
| [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) | |
| [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) | |
| [ 0.000000] .text : 0x80008000 - 0x80a08b80 (10243 kB) | |
| [ 0.000000] .init : 0x80a09000 - 0x80a64700 ( 366 kB) | |
| [ 0.000000] .data : 0x80a66000 - 0x80ac7110 ( 389 kB) | |
| [ 0.000000] .bss : 0x80ac7118 - 0x80b4c8d0 ( 534 kB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] Hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS:16 nr_irqs:16 16 | |
| [ 0.000000] L2C-310 erratum 769419 enabled | |
| [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 | |
| [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 | |
| [ 0.000000] L2C-310 ID prefetch enabled, offset 4 lines | |
| [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled | |
| [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB | |
| [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001 | |
| [ 0.000011] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns | |
| [ 0.001027] Console: colour dummy device 80x30 | |
| [ 0.001053] Calibrating delay loop... 1570.81 BogoMIPS (lpj=785408) | |
| [ 0.015458] pid_max: default: 32768 minimum: 301 | |
| [ 0.015598] Security Framework initialized | |
| [ 0.015613] Smack: Initializing. | |
| [ 0.015688] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| [ 0.015701] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| [ 0.021085] Initializing cgroup subsys memory | |
| [ 0.021111] Initializing cgroup subsys devices | |
| [ 0.021123] Initializing cgroup subsys freezer | |
| [ 0.021133] Initializing cgroup subsys net_cls | |
| [ 0.021142] Initializing cgroup subsys blkio | |
| [ 0.021151] Initializing cgroup subsys bfqio | |
| [ 0.021159] Initializing cgroup subsys perf_event | |
| [ 0.021234] CPU: Testing write buffer coherency: ok | |
| [ 0.021506] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| [ 0.021565] Setting up static identity map for 0x107136e0 - 0x10713738 | |
| [ 0.023918] CPU1: Booted secondary processor | |
| [ 0.030450] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| [ 0.030568] Brought up 2 CPUs | |
| [ 0.030585] SMP: Total of 2 processors activated. | |
| [ 0.030594] CPU: All CPU(s) started in SVC mode. | |
| [ 0.031287] devtmpfs: initialized | |
| [ 0.034875] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| [ 0.048959] atomic64 test passed | |
| [ 0.049047] pinctrl core: initialized pinctrl subsystem | |
| [ 0.049427] regulator-dummy: no parameters | |
| [ 0.050017] NET: Registered protocol family 16 | |
| [ 0.058057] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| [ 0.058654] cpuidle: using governor ladder | |
| [ 0.058665] cpuidle: using governor menu | |
| [ 0.058838] CPU identified as i.MX6Q, silicon rev 1.5 | |
| [ 0.058926] Use WDOG1 as reset source | |
| [ 0.067756] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered | |
| [ 0.068051] vdd1p1: 800 <--> 1375 mV at 1125 mV | |
| [ 0.068403] vdd3p0: 2800 <--> 3150 mV at 3000 mV | |
| [ 0.068759] vdd2p5: 2000 <--> 2750 mV at 2425 mV | |
| [ 0.070476] vddarm: 725 <--> 1450 mV at 1150 mV | |
| [ 0.070818] vddpu: 725 <--> 1450 mV at 1150 mV | |
| [ 0.071473] vddsoc: 725 <--> 1450 mV at 1200 mV | |
| [ 0.073187] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered | |
| [ 0.075642] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered | |
| [ 0.079654] No ATAGs? | |
| [ 0.079680] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| [ 0.079691] hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| [ 0.080282] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver | |
| [ 0.081034] Serial: AMBA PL011 UART driver | |
| [ 0.095436] bio: create slab <bio-0> at 0 | |
| [ 0.097774] mxs-dma 110000.dma-apbh: initialized | |
| [ 0.098491] brcm_osc_reg: 3300 mV | |
| [ 0.098766] brcm_reg: 3300 mV | |
| [ 0.098977] 3P3V: 3300 mV | |
| [ 0.099245] usb_h1_vbus: 5000 mV | |
| [ 0.099529] usb_otg_vbus: 5000 mV | |
| [ 0.099856] vgaarb: loaded | |
| [ 0.100619] SCSI subsystem initialized | |
| [ 0.101089] usbcore: registered new interface driver usbfs | |
| [ 0.101151] usbcore: registered new interface driver hub | |
| [ 0.101255] usbcore: registered new device driver usb | |
| [ 0.101400] usbphy_nop1.11 supply vcc not found, using dummy regulator | |
| [ 0.101523] usbphy_nop2.12 supply vcc not found, using dummy regulator | |
| [ 0.103032] i2c i2c-0: IMX I2C adapter registered | |
| [ 0.103666] i2c i2c-1: IMX I2C adapter registered | |
| [ 0.103940] media: Linux media interface: v0.10 | |
| [ 0.103994] Linux video capture interface: v2.00 | |
| [ 0.104088] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.104097] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.104123] PTP clock support registered | |
| [ 0.106528] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) | |
| [ 0.109516] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) | |
| [ 0.110273] MIPI CSI2 driver module loaded | |
| [ 0.110366] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.111316] NetLabel: Initializing | |
| [ 0.111325] NetLabel: domain hash size = 128 | |
| [ 0.111333] NetLabel: protocols = UNLABELED CIPSOv4 | |
| [ 0.111385] NetLabel: unlabeled traffic allowed by default | |
| [ 0.111633] Switched to clocksource mxc_timer1 | |
| [ 0.123802] NET: Registered protocol family 2 | |
| [ 0.124535] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| [ 0.124615] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.124778] TCP: Hash tables configured (established 8192 bind 8192) | |
| [ 0.124855] TCP: reno registered | |
| [ 0.124871] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| [ 0.124921] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| [ 0.125259] NET: Registered protocol family 1 | |
| [ 0.125603] RPC: Registered named UNIX socket transport module. | |
| [ 0.125613] RPC: Registered udp transport module. | |
| [ 0.125620] RPC: Registered tcp transport module. | |
| [ 0.125652] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.126225] hw perfevents: enabled with ARMv7_Cortex_A9 PMU driver, 7 counters available | |
| [ 0.127695] pureg-dummy: no parameters | |
| [ 0.128740] imx6_busfreq busfreq.14: DDR medium rate not supported. | |
| [ 0.129311] Bus freq driver module loaded | |
| [ 0.130136] futex hash table entries: 512 (order: 3, 32768 bytes) | |
| [ 0.130372] audit: initializing netlink subsys (disabled) | |
| [ 0.130414] audit: type=2000 audit(0.129:1): initialized | |
| [ 0.341488] zbud: loaded | |
| [ 0.342086] VFS: Disk quotas dquot_6.5.2 | |
| [ 0.342366] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| [ 0.345058] NFS: Registering the id_resolver key type | |
| [ 0.345121] Key type id_resolver registered | |
| [ 0.345131] Key type id_legacy registered | |
| [ 0.345150] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.345185] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
| [ 0.345731] fuse init (API version 7.22) | |
| [ 0.346218] msgmni has been set to 2002 | |
| [ 0.346534] Key type big_key registered | |
| [ 0.359776] alg: No test for stdrng (krng) | |
| [ 0.360003] NET: Registered protocol family 38 | |
| [ 0.360085] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) | |
| [ 0.360186] io scheduler noop registered | |
| [ 0.360396] io scheduler cfq registered | |
| [ 0.360433] io scheduler bfq registered (default) | |
| [ 0.360441] BFQ I/O-scheduler version: v7r5 | |
| [ 0.363034] mxc_sdc_fb fb.27: register mxc display driver hdmi | |
| [ 0.363206] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1 | |
| [ 0.363232] fbcvt: 1920x1080@60: CVT Name - 2.073M9 | |
| [ 0.395712] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) | |
| [ 0.467124] Console: switching to colour frame buffer device 240x67 | |
| [ 0.502190] imx-sdma 20ec000.sdma: no iram assigned, using external mem | |
| [ 0.503178] imx-sdma 20ec000.sdma: loaded firmware 1.1 | |
| [ 0.505695] imx-sdma 20ec000.sdma: initialized | |
| [ 0.506256] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.507482] Serial: IMX driver | |
| [ 0.507795] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX | |
| [ 1.411702] console [ttymxc0] enabled | |
| [ 1.416178] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX | |
| [ 1.425174] serial: Freescale lpuart driver | |
| [ 1.430599] [drm] Initialized drm 1.1.0 20060810 | |
| [ 1.435624] [drm] Initialized vivante 1.0.0 20120216 on minor 0 | |
| [ 1.448906] brd: module loaded | |
| [ 1.452147] loop: module loaded | |
| [ 1.456174] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044 | |
| [ 1.463868] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000 | |
| [ 1.471379] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000 | |
| [ 1.479063] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 | |
| [ 1.489557] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled | |
| [ 1.496571] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode | |
| [ 1.505397] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst | |
| [ 1.516053] scsi0 : ahci_platform | |
| [ 1.519796] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71 | |
| [ 1.529796] libphy: Fixed MDIO Bus: probed | |
| [ 1.534718] 2188000.ethernet supply phy not found, using dummy regulator | |
| [ 1.548505] libphy: fec_enet_mii_bus: probed | |
| [ 1.553428] fec 2188000.ethernet eth0: registered PHC device 0 | |
| [ 1.560141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 1.566703] ehci-pci: EHCI PCI platform driver | |
| [ 1.571236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 1.577452] ohci-pci: OHCI PCI platform driver | |
| [ 1.581966] uhci_hcd: USB Universal Host Controller Interface driver | |
| [ 1.582119] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_read_edid HDMI in HDMI mode | |
| [ 1.596085] usbcore: registered new interface driver usb-storage | |
| [ 1.596122] usbcore: registered new interface driver ums-usbat | |
| [ 1.596245] usbcore: registered new interface driver usbserial | |
| [ 1.596291] usbcore: registered new interface driver usbserial_generic | |
| [ 1.596327] usbserial: USB Serial support registered for generic | |
| [ 1.596873] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator | |
| [ 1.601328] ci_hdrc ci_hdrc.0: EHCI Host Controller | |
| [ 1.601546] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 | |
| [ 1.607673] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 | |
| [ 1.607845] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| [ 1.607854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.607862] usb usb1: Product: EHCI Host Controller | |
| [ 1.607869] usb usb1: Manufacturer: Linux 3.14.14+g4a2f77e ehci_hcd | |
| [ 1.607875] usb usb1: SerialNumber: ci_hdrc.0 | |
| [ 1.608543] hub 1-0:1.0: USB hub found | |
| [ 1.608580] hub 1-0:1.0: 1 port detected | |
| [ 1.612333] ci_hdrc ci_hdrc.1: doesn't support gadget | |
| [ 1.612347] ci_hdrc ci_hdrc.1: EHCI Host Controller | |
| [ 1.612552] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 | |
| [ 1.618660] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 | |
| [ 1.618822] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| [ 1.618831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.618839] usb usb2: Product: EHCI Host Controller | |
| [ 1.618846] usb usb2: Manufacturer: Linux 3.14.14+g4a2f77e ehci_hcd | |
| [ 1.618852] usb usb2: SerialNumber: ci_hdrc.1 | |
| [ 1.619453] hub 2-0:1.0: USB hub found | |
| [ 1.619496] hub 2-0:1.0: 1 port detected | |
| [ 1.620316] mousedev: PS/2 mouse device common for all mice | |
| [ 1.625507] rtc-pcf8523 0-0068: rtc core: registered rtc-pcf8523 as rtc0 | |
| [ 1.626062] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1 | |
| [ 1.626158] i2c /dev entries driver | |
| [ 1.633666] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) | |
| [ 1.634055] device-mapper: uevent: version 1.0.3 | |
| [ 1.634388] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com | |
| [ 1.634742] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.634745] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.634748] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.635577] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode | |
| [ 1.636925] mmc0: no vqmmc regulator found | |
| [ 1.844674] ata1: SATA link down (SStatus 0 SControl 300) | |
| [ 1.844715] ahci-imx 2200000.sata: no device found, disabling link. | |
| [ 1.844723] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug | |
| [ 1.907669] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA | |
| [ 1.911283] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode | |
| [ 1.911618] mmc1: no vqmmc regulator found | |
| [ 1.911924] 2194000.usdhc supply card-external-vcc not found, using dummy regulator | |
| [ 1.912695] usb 1-1: new low-speed USB device number 2 using ci_hdrc | |
| [ 1.977665] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA | |
| [ 2.313050] Galcore version 4.6.9.9754 | |
| [ 2.337132] usb 1-1: New USB device found, idVendor=046d, idProduct=c058 | |
| [ 2.343884] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| [ 2.351060] usb 1-1: Product: USB Optical Mouse | |
| [ 2.351782] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed | |
| [ 2.352254] mxc_asrc 2034000.asrc: mxc_asrc registered | |
| [ 2.352944] mxc_vpu 2040000.vpu: VPU initialized | |
| [ 2.353547] mxc_hdmi_cec hdmi_cec.16: HDMI CEC initialized | |
| [ 2.353790] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 2.353854] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 2.354119] usbcore: registered new interface driver usbhid | |
| [ 2.354122] usbhid: USB HID core driver | |
| [ 2.399443] usb 1-1: Manufacturer: Logitech | |
| [ 2.404220] sgtl5000 0-000a: sgtl5000 revision 0x11 | |
| [ 2.416505] input: Logitech USB Optical Mouse as /devices/soc0/soc.1/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.0/0003:046D:C058.0001/input/input0 | |
| [ 2.431981] hid-generic 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-ci_hdrc.0-1/input0 | |
| [ 2.452173] 0-000a: 1200 mV normal | |
| [ 2.457804] sgtl5000 0-000a: Using internal LDO instead of VDDD | |
| [ 2.466002] sgtl5000 0-000a: ldo_regulator_enable(): enabled 0 | |
| [ 2.497664] imx-sgtl5000 sound-sgtl5000.24: sgtl5000 <-> 2028000.ssi mapping ok | |
| [ 2.510021] imx-spdif sound-spdif.25: snd-soc-dummy-dai <-> 2004000.spdif mapping ok | |
| [ 2.535153] imx-audio-hdmi sound-hdmi.26: hdmi-hifi <-> hdmi_audio.15 mapping ok | |
| [ 2.544842] oprofile: using timer interrupt. | |
| [ 2.549439] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 2.549687] usb 2-1: new high-speed USB device number 2 using ci_hdrc | |
| [ 2.563334] TCP: cubic registered | |
| [ 2.568734] Initializing XFRM netlink socket | |
| [ 2.573598] NET: Registered protocol family 10 | |
| [ 2.583140] mip6: Mobile IPv6 | |
| [ 2.588189] NET: Registered protocol family 17 | |
| [ 2.594745] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 2.601057] Key type dns_resolver registered | |
| [ 2.613211] registered taskstats version 1 | |
| [ 2.619889] regulator-dummy: disabling | |
| [ 2.628715] rtc-pcf8523 0-0068: hctosys: unable to read the hardware clock | |
| [ 2.645821] ALSA device list: | |
| [ 2.648865] #0: On-board Codec | |
| [ 2.652367] #1: imx-spdif | |
| [ 2.655186] #2: imx-hdmi-soc | |
| [ 2.658557] md: Waiting for all devices to be available before autodetect | |
| [ 2.665373] md: If you don't use raid, use raid=noautodetect | |
| [ 2.671776] md: Autodetecting RAID arrays. | |
| [ 2.675906] md: Scanned 0 and added 0 devices. | |
| [ 2.680373] md: autorun ... | |
| [ 2.683185] md: ... autorun DONE. | |
| [ 2.686706] Waiting for root device /dev/mmcblk0p2... | |
| [ 2.692997] usb 2-1: New USB device found, idVendor=04b4, idProduct=6570 | |
| [ 2.699743] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| [ 2.706899] usb 2-1: Product: USB2.0 Hub | |
| [ 2.711648] hub 2-1:1.0: USB hub found | |
| [ 2.717868] hub 2-1:1.0: 4 ports detected | |
| [ 2.827677] mmc1: host does not support reading read-only switch. assuming write-enable. | |
| [ 2.842015] mmc1: new high speed SDHC card at address 59b4 | |
| [ 2.847984] mmcblk0: mmc1:59b4 00000 14.9 GiB | |
| [ 2.853664] mmcblk0: p1 p2 | |
| [ 2.894694] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) | |
| [ 2.904813] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) | |
| [ 2.956673] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended | |
| [ 2.986663] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 2.994831] VFS: Mounted root (ext4 filesystem) on device 179:2. | |
| [ 3.000899] usb 2-1.1: new low-speed USB device number 3 using ci_hdrc | |
| [ 3.009341] devtmpfs: mounted | |
| [ 3.012671] Freeing unused kernel memory: 364K (80a09000 - 80a64000) | |
| [ 3.105243] usb 2-1.1: New USB device found, idVendor=04d9, idProduct=1702 | |
| [ 3.112275] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| [ 3.119651] usb 2-1.1: Product: USB Keyboard | |
| [ 3.123972] usb 2-1.1: Manufacturer: | |
| [ 3.140327] input: USB Keyboard as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1:1.0/0003:04D9:1702.0002/input/input1 | |
| [ 3.155104] hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-ci_hdrc.1-1.1/input0 | |
| [ 3.184172] input: USB Keyboard as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1:1.1/0003:04D9:1702.0003/input/input2 | |
| [ 3.198459] hid-generic 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-ci_hdrc.1-1.1/input1 | |
| [ 3.403235] systemd[1]: Successfully loaded Smack policies. | |
| [ 3.411334] systemd[1]: Successfully loaded Smack/CIPSO policies. | |
| [ 3.430492] random: systemd urandom read with 123 bits of entropy available | |
| [ 3.446034] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN ) | |
| [ 3.464673] systemd[1]: Detected architecture 'arm'. | |
| Welcome to [0;36mTizen 3.0.0 (Tizen3/Common)[0m! | |
| [ 3.479067] random: nonblocking pool is initialized | |
| [ 3.965221] systemd[1]: Configuration file /usr/lib/systemd/system/smack-rules.service is marked executable. Please remove executable permission bits. Proceeding anyway. | |
| [ 3.980530] systemd[1]: Configuration file /usr/lib/systemd/system/smack-rules.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. | |
| [ 4.040217] systemd[1]: Cannot add dependency job for unit deviced.service, ignoring: Unit tizen-system-env.service failed to load: No such file or directory. | |
| [ 4.054817] systemd[1]: Found ordering cycle on default.target/start | |
| [ 4.061224] systemd[1]: Found dependency on graphical.target/start | |
| [ 4.067440] systemd[1]: Found dependency on zbooting-done.service/start | |
| [ 4.074090] systemd[1]: Found dependency on default.target/start | |
| [ 4.080125] systemd[1]: Breaking ordering cycle by deleting job zbooting-done.service/start | |
| [ 4.088505] systemd[1]: Job zbooting-done.service/start deleted to break ordering cycle starting with default.target/start | |
| [[1;31m SKIP [0m] Ordering cycle found, skipping Booting Done | |
| [ 4.105788] systemd[1]: Found ordering cycle on basic.target/start | |
| [ 4.112041] systemd[1]: Found dependency on paths.target/start | |
| [ 4.117916] systemd[1]: Found dependency on display-manager.path/start | |
| [ 4.124479] systemd[1]: Found dependency on display-manager-run.service/start | |
| [ 4.131655] systemd[1]: Found dependency on basic.target/start | |
| [ 4.137522] systemd[1]: Breaking ordering cycle by deleting job paths.target/start | |
| [ 4.145127] systemd[1]: Job paths.target/start deleted to break ordering cycle starting with basic.target/start | |
| [[1;31m SKIP [0m] Ordering cycle found, skipping Paths | |
| [ 4.163736] systemd[1]: Expecting device dev-ttymxc0.device... | |
| Expecting device dev-ttymxc0.device... | |
| [ 4.174829] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. | |
| [[32m OK [0m] Set up automount Arbitrary Executab...ats File System Automount Point. | |
| [ 4.192740] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
| [ 4.202260] systemd[1]: Starting Swap. | |
| [[32m OK [0m] Reached target Swap. | |
| [ 4.210721] systemd[1]: Reached target Swap. | |
| [ 4.215091] systemd[1]: Starting Root Slice. | |
| [ 4.251023] systemd[1]: Failed to set memory.limit_in_bytes on : Invalid argument | |
| [[32m OK [0m] Created slice Root Slice. | |
| [ 4.263740] systemd[1]: Created slice Root Slice. | |
| [ 4.268552] systemd[1]: Starting User and Session Slice. | |
| [[32m OK [0m] Created slice User and Session Slice. | |
| [ 4.280736] systemd[1]: Created slice User and Session Slice. | |
| [ 4.286585] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. | |
| [[32m OK [0m] Listening on /dev/initctl Compatibility Named Pipe. | |
| [ 4.301734] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
| [ 4.308791] systemd[1]: Starting Delayed Shutdown Socket. | |
| [[32m OK [0m] Listening on Delayed Shutdown Socket. | |
| [ 4.319833] systemd[1]: Listening on Delayed Shutdown Socket. | |
| [ 4.325876] systemd[1]: Starting Journal Socket (/dev/log). | |
| [[32m OK [0m] Listening on Journal Socket (/dev/log). | |
| [ 4.337746] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ 4.343821] systemd[1]: Starting udev Kernel Socket. | |
| [[32m OK [0m] Listening on udev Kernel Socket. | |
| [ 4.354751] systemd[1]: Listening on udev Kernel Socket. | |
| [ 4.360207] systemd[1]: Starting udev Control Socket. | |
| [[32m OK [0m] Listening on udev Control Socket. | |
| [ 4.371748] systemd[1]: Listening on udev Control Socket. | |
| [ 4.377285] systemd[1]: Starting Journal Socket. | |
| [[32m OK [0m] Listening on Journal Socket. | |
| [ 4.387749] systemd[1]: Listening on Journal Socket. | |
| [ 4.392891] systemd[1]: Starting System Slice. | |
| [[32m OK [0m] Created slice System Slice. | |
| [ 4.403759] systemd[1]: Created slice System Slice. | |
| [ 4.408864] systemd[1]: Mounting Temporary Directory... | |
| Mounting Temporary Directory... | |
| [ 4.431062] systemd[1]: Starting system-serial\x2dgetty.slice. | |
| [[32m OK [0m] Created slice system-serial\x2dgetty.slice. | |
| [ 4.444771] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ 4.451197] systemd[1]: Starting prepare device daemon... | |
| Starting prepare device daemon... | |
| [ 4.464903] systemd[1]: Starting Setup Virtual Console... | |
| Starting Setup Virtual Console... | |
| [ 4.479589] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting POSIX Message Queue File System... | |
| [ 4.494627] systemd[1]: Starting Apply Kernel Variables... | |
| Starting Apply Kernel Variables... | |
| [ 4.508875] systemd[1]: Mounting Debug File System... | |
| Mounting Debug File System... | |
| [ 4.521344] systemd[1]: Mounting Configuration File System... | |
| Mounting Configuration File System... | |
| [ 4.535814] systemd[1]: Starting udev Coldplug all Devices... | |
| Starting udev Coldplug all Devices... | |
| [ 4.573260] systemd[1]: Started Create list of required static device nodes for the current kernel. | |
| [ 4.582709] systemd[1]: Starting Create Static Device Nodes in /dev... | |
| Starting Create Static Device Nodes in /dev... | |
| [ 4.597306] systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [[32m OK [0m] Started Journal Service. | |
| [ 4.614788] systemd[1]: Started Journal Service. | |
| [[32m OK [0m] Reached target Slices. | |
| Starting Remount Root and Kernel File Systems... | |
| [[32m OK [0m] Started Apply Kernel Variables. | |
| [[32m OK [0m] Started Create Static Device Nodes in /dev. | |
| [[32m OK [0m] Started udev Coldplug all Devices. | |
| [[32m OK [0m] Mounted Configuration File System. | |
| [[32m OK [0m] Mounted Debug File System. | |
| [[32m OK [0m] Mounted POSIX Message Queue File System. | |
| [[32m OK [0m] Mounted Temporary Directory. | |
| [[32m OK [0m] Started Setup Virtual Console. | |
| [ 5.203407] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
| [[32m OK [0m] Started Remount Root and Kernel File Systems. | |
| Starting udev Kernel Device Manager... | |
| Starting Load/Save Random Seed... | |
| [[32m OK [0m] Reached target Local File Systems (Pre). | |
| [[32m OK [0m] Reached target Local File Systems. | |
| Starting Trigger Flushing of Journal to Persistent Storage... | |
| [ 5.274382] systemd-udevd[156]: starting version 216 | |
| Starting Create Volatile Files and Directories... | |
| [[32m OK [0m] Started udev Kernel Device Manager. | |
| [[32m OK [0m] Started prepare device daemon. | |
| [[32m OK [0m] Started Load/Save Random Seed. | |
| [ 5.366077] systemd-journald[133]: Received request to flush runtime journal from PID 1 | |
| [[32m OK [0m] Started Create Volatile Files and Directories. | |
| Starting Update UTMP about System Boot/Shutdown... | |
| [[32m OK [0m] Started Update UTMP about System Boot/Shutdown. | |
| [[32m OK [0m] Started Trigger Flushing of Journal to Persistent Storage. | |
| [[32m OK [0m] Reached target System Initialization. | |
| [[32m OK [0m] Listening on Sensor daemon socket. | |
| [[32m OK [0m] Listening on sshd.socket. | |
| [[32m OK [0m] Listening on cynara.socket. | |
| [[32m OK [0m] Listening on Buxton Configuration Service. | |
| [[32m OK [0m] Listening on security-server-app-privilege-by-name.socket. | |
| [[32m OK [0m] Listening on security-server-privilege-by-pid.socket. | |
| [[32m OK [0m] Listening on secure-storage.socket. | |
| [[32m OK [0m] Listening on security-server-data-share.socket. | |
| [[32m OK [0m] Listening on download-provider.socket. | |
| [[32m OK [0m] Listening on security-server-password-set.socket. | |
| [[32m OK [0m] Listening on System server socket. | |
| [[32m OK [0m] Listening on security-server-get-gid.socket. | |
| [[32m OK [0m] Listening on security-manager.socket. | |
| [[32m OK [0m] Listening on security-server-password-reset.socket. | |
| [[32m OK [0m] Listening on security-server-password-check.socket. | |
| [[32m OK [0m] Listening on cynara-agent.socket. | |
| [[32m OK [0m] Listening on security-server-cookie-check.socket. | |
| [[32m OK [0m] Listening on cynara-admin.socket. | |
| [[32m OK [0m] Reached target cynara sockets. | |
| [[32m OK [0m] Listening on ac.socket. | |
| [[32m OK [0m] Listening on D-Bus System Message Bus Socket. | |
| [[32m OK [0m] Listening on security-server-cookie-get.socket. | |
| [[32m OK [0m] Reached target Sockets. | |
| [[32m OK [0m] Reached target security-server sockets. | |
| [[32m OK [0m] Reached target Timers. | |
| Starting Restore Sound Card State... | |
| [[32m OK [0m] Reached target Basic System. | |
| Starting CSF Tizen Plugin Control Service Daemon (TPCSSerDaemon)... | |
| Starting Messageport Daemon... | |
| [[32m OK [0m] Started Messageport Daemon. | |
| Starting CSF Tizen Web Protection Service Daemon (TWPSerDaemon)... | |
| Starting Connection service... | |
| Starting SMACK rules loading... | |
| Starting Start the Alarm service... | |
| [[32m OK [0m] Started Start the Alarm service. | |
| Starting Login Service... | |
| Starting net config service... | |
| Starting Weston display daemon... | |
| [[32m OK [0m] Started Weston display daemon. | |
| Starting Display manager setup service... | |
| Starting Sensor Daemon... | |
| Starting Telephony service... | |
| Starting Start the Secure Storage server... | |
| Starting Download provider service... | |
| [[32m OK [0m] Started Download provider service. | |
| Starting System device daemon... | |
| [[32m OK [0m] Started System device daemon. | |
| Starting Cynara service... | |
| Starting Start the Access Control server... | |
| Starting D-Bus System Message Bus... | |
| [[32m OK [0m] Started D-Bus System Message Bus. | |
| [[32m OK [0m] Started CSF Tizen Plugin Control Service Daemon (TPCSSerDaemon). | |
| [[32m OK [0m] Started Connection service. | |
| [[32m OK [0m] Started Telephony service. | |
| [[32m OK [0m] Started CSF Tizen Web Protection Service Daemon (TWPSerDaemon). | |
| Starting Start the security server... | |
| Starting Buxton Configuration Service... | |
| [[32m OK [0m] Started Buxton Configuration Service. | |
| Starting Initialize the vconf-buxton memory storage... | |
| Starting Permit User Sessions... | |
| [[32m OK [0m] Started Restore Sound Card State. | |
| [[32m OK [0m] Started SMACK rules loading. | |
| [[1;31mFAILED[0m] Failed to start Display manager setup service. | |
| See 'systemctl status display-manager.service' for details. | |
| [[32m OK [0m] Found device /dev/ttymxc0. | |
| [[32m OK [0m] Started Permit User Sessions. | |
| [[32m OK [0m] Started Start the Secure Storage server. | |
| [[32m OK [0m] Started Start the Access Control server. | |
| [[32m OK [0m] Started Login Service. | |
| Starting Bluetooth service... | |
| [[32m OK [0m] Reached target Sound Card. | |
| Starting Tiny Login Manager... | |
| [[32m OK [0m] Started Tiny Login Manager. | |
| Starting Serial Getty on ttymxc0... | |
| [[32m OK [0m] Started Serial Getty on ttymxc0. | |
| [[32m OK [0m] Reached target Login Prompts. | |
| Mounting FUSE Control File System... | |
| Starting Display manager setup service... | |
| [[32m OK [0m] Mounted FUSE Control File System. | |
| [[32m OK [0m] Started Display manager setup service. | |
| [[32m OK [0m] Started Bluetooth service. | |
| [[32m OK [0m] Started Cynara service. | |
| Starting Bluetooth service... | |
| Starting WPA supplicant... | |
| [[32m OK [0m] Started Start the security server. | |
| [ 8.969471] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) | |
| [ 9.000222] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| [[1;31mFAILED[0m] Failed to start Bluetooth service. | |
| See 'systemctl status bluetooth.service' for details. | |
| [[32m OK [0m] Started WPA supplicant. | |
| Starting Hostname Service... | |
| [[32m OK [0m] Started net config service. | |
| [[32m OK [0m] Started Sensor Daemon. | |
| [[32m OK [0m] Started Hostname Service. | |
| [[32m OK [0m] Created slice user-5001.slice. | |
| Starting User Manager for UID 5001... | |
| [[32m OK [0m] Created slice user-5003.slice. | |
| Starting User Manager for UID 5003... | |
| [[32m OK [0m] Created slice user-5100.slice. | |
| Starting User Manager for UID 5100... | |
| [[32m OK [0m] Created slice user-9999.slice. | |
| Starting User Manager for UID 9999... | |
| [[32m OK [0m] Created slice user-5002.slice. | |
| Starting User Manager for UID 5002... | |
| [[32m OK [0m] Started User Manager for UID 5001. | |
| [[32m OK [0m] Started User Manager for UID 5003. | |
| [[32m OK [0m] Started User Manager for UID 5100. | |
| [[32m OK [0m] Started User Manager for UID 9999. | |
| [ 11.138960] audit: type=1400 audit(11.138:2): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="System" requested=r pid=579 comm="pgrep" path="/proc/1" dev="proc" ino=1273 | |
| [ 11.151823] audit: type=1400 audit(11.151:3): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="System" requested=r pid=586 comm="pgrep" path="/proc/1" dev="proc" ino=1273 | |
| [ 11.183440] audit: type=1400 audit(11.182:4): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="^" requested=r pid=586 comm="pgrep" path="/proc/133" dev="proc" ino=3629 | |
| [ 11.236075] audit: type=1400 audit(11.235:5): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="System" requested=r pid=586 comm="pgrep" path="/proc/156" dev="proc" ino=1925 | |
| [[32m OK [0m] Started User Manager for UID 5002. | |
| [ 11.261849] audit: type=1400 audit(11.261:6): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="System" requested=r pid=586 comm="pgrep" path="/proc/180" dev="proc" ino=4269 | |
| [ 11.327015] audit: type=1400 audit(11.326:7): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="System" requested=r pid=586 comm="pgrep" path="/proc/182" dev="proc" ino=5342 | |
| [ 11.336353] audit: type=1400 audit(11.326:8): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="^" requested=r pid=579 comm="pgrep" path="/proc/133" dev="proc" ino=3629 | |
| [ 11.336644] audit: type=1400 audit(11.326:9): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="System" requested=r pid=579 comm="pgrep" path="/proc/156" dev="proc" ino=1925 | |
| [ 11.336775] audit: type=1400 audit(11.326:10): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="System" requested=r pid=579 comm="pgrep" path="/proc/180" dev="proc" ino=4269 | |
| [ 11.336986] audit: type=1400 audit(11.326:11): lsm=SMACK fn=smack_inode_getattr action=denied subject="User" object="System" requested=r pid=579 comm="pgrep" path="/proc/182" dev="proc" ino=5342 | |
| [[32m OK [0m] Started Initialize the vconf-buxton memory storage. | |
| Starting Media server... | |
| [[32m OK [0m] Started Media server. | |
| [[32m OK [0m] Reached target Multi-User System. | |
| [[32m OK [0m] Reached target Graphical Interface. | |
| Starting Notifications daemon... | |
| [[32m OK [0m] Started Notifications daemon. | |
| Starting Notifications Popup daemon... | |
| [[32m OK [0m] Started Notifications Popup daemon. | |
| [[32m OK [0m] Reached target Default target. | |
| [ 12.983094] libphy: 2188000.ethernet:00 - Link is Up - 1000/Full | |
| [ 12.998728] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| common_box login: root | |
| Password: | |
| [ 19.091792] audit_printk_skb: 456 callbacks suppressed | |
| [ 19.097029] audit: type=1400 audit(19.091:164): lsm=SMACK fn=smack_key_permission action=denied subject="System" object="_" requested=w pid=244 comm="login" key_serial=714462954 key_desc="_uid.0" | |
| Last login: Thu Apr 30 08:29:31 on ttymxc0 | |
| Welcome to Tizen | |
| [1;31mroot[0m@[1;32mcommon_box[0m:[1;33m~[0m[1;31m[0m# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U- L 2013.10-rc4 (Apr 30 2015 - 1:15:18)Boot Devicmr 1a aefo A.. | |
| U-Boo013.cA 3)CU recl .XQt2M | |
| a XmingBoard | |
| DRAM: 1 GiB | |
| * C,nonet | |
| In: | |
| ] | |
| atB. Bng s 0 for dvices... evie(s) found | |
| scing usb for storage devices... 0 Stoce(found | |
| scanning usb for ethernet devices... Ethernet Device(s) found | |
| Hit any y to stop autoboot: 3 0 | |
| mmc0 is current device | |
| ** Unable to read file /boot.scr ** | |
| 123 bytes read in 9 ms (12.7 KiB/s) | |
| Importing environment from mmc0 ... | |
| 6143128 bytes read in 285 ms (20.6 MiB/s) | |
| Booting from mmc ... | |
| 33676 bytes read in 18 ms (1.8 MiB/s) | |
| Loaded imx6q-hummingboard.dtb | |
| Booting zImage | |
| Kernel image @ 0x10800000 [ 0x000000 - 0x5dbc98 ] | |
| ## Flattened Device Tree blob at 18000000 | |
| Booting using the fdt blob at 0x18000000 | |
| Using Device Tree in place at 18000000, end 1800b38b | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Initializing cgroup subsys cpuset | |
| [ 0.000000] Initializing cgroup subsys cpu | |
| [ 0.000000] Initializing cgroup subsys cpuacct | |
| [ 0.000000] Linux version 3.14.14+g4a2f77e (leon@leon-desktop-G1) (gcc version 4.9.1 (GCC) ) #1 SMP Thu Apr 30 15:40:08 EEST 2015 | |
| [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d | |
| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| [ 0.000000] Machine model: SolidRun HummingBoard Dual/Quad | |
| [ 0.000000] cma: CMA: reserved 256 MiB at 40000000 | |
| [ 0.000000] Memory policy: Data cache writealloc | |
| [ 0.000000] PERCPU: Embedded 8 pages/cpu @af758000 s9984 r8192 d14592 u32768 | |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 | |
| [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 | |
| [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| [ 0.000000] allocated 2097152 bytes of page_cgroup | |
| [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups | |
| [ 0.000000] Memory: 763152K/1048576K available (7462K kernel code, 388K rwdata, 2780K rodata, 365K init, 533K bss, 285424K reserved, 0K highmem) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
| [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB) | |
| [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) | |
| [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) | |
| [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) | |
| [ 0.000000] .text : 0x80008000 - 0x80a08b80 (10243 kB) | |
| [ 0.000000] .init : 0x80a09000 - 0x80a64700 ( 366 kB) | |
| [ 0.000000] .data : 0x80a66000 - 0x80ac7110 ( 389 kB) | |
| [ 0.000000] .bss : 0x80ac7118 - 0x80b4c8d0 ( 534 kB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] Hierarchical RCU implementation. | |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. | |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS:16 nr_irqs:16 16 | |
| [ 0.000000] L2C-310 erratum 769419 enabled | |
| [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 | |
| [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 | |
| [ 0.000000] L2C-310 ID prefetch enabled, offset 4 lines | |
| [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled | |
| [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB | |
| [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001 | |
| [ 0.000012] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns | |
| [ 0.001032] Console: colour dummy device 80x30 | |
| [ 0.001056] Calibrating delay loop... 1570.81 BogoMIPS (lpj=785408) | |
| [ 0.015460] pid_max: default: 32768 minimum: 301 | |
| [ 0.015598] Security Framework initialized | |
| [ 0.015612] Smack: Initializing. | |
| [ 0.015689] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| [ 0.015701] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| [ 0.021087] Initializing cgroup subsys memory | |
| [ 0.021114] Initializing cgroup subsys devices | |
| [ 0.021124] Initializing cgroup subsys freezer | |
| [ 0.021134] Initializing cgroup subsys net_cls | |
| [ 0.021142] Initializing cgroup subsys blkio | |
| [ 0.021151] Initializing cgroup subsys bfqio | |
| [ 0.021160] Initializing cgroup subsys perf_event | |
| [ 0.021233] CPU: Testing write buffer coherency: ok | |
| [ 0.021505] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| [ 0.021566] Setting up static identity map for 0x107136e0 - 0x10713738 | |
| [ 0.023915] CPU1: Booted secondary processor | |
| [ 0.030453] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| [ 0.030573] Brought up 2 CPUs | |
| [ 0.030589] SMP: Total of 2 processors activated. | |
| [ 0.030598] CPU: All CPU(s) started in SVC mode. | |
| [ 0.031296] devtmpfs: initialized | |
| [ 0.034870] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| [ 0.049136] atomic64 test passed | |
| [ 0.049222] pinctrl core: initialized pinctrl subsystem | |
| [ 0.049645] regulator-dummy: no parameters | |
| [ 0.050188] NET: Registered protocol family 16 | |
| [ 0.058228] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| [ 0.058827] cpuidle: using governor ladder | |
| [ 0.058837] cpuidle: using governor menu | |
| [ 0.059013] CPU identified as i.MX6Q, silicon rev 1.5 | |
| [ 0.059103] Use WDOG1 as reset source | |
| [ 0.067915] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered | |
| [ 0.068200] vdd1p1: 800 <--> 1375 mV at 1125 mV | |
| [ 0.068584] vdd3p0: 2800 <--> 3150 mV at 3000 mV | |
| [ 0.068920] vdd2p5: 2000 <--> 2750 mV at 2425 mV | |
| [ 0.070481] vddarm: 725 <--> 1450 mV at 1150 mV | |
| [ 0.070817] vddpu: 725 <--> 1450 mV at 1150 mV | |
| [ 0.071475] vddsoc: 725 <--> 1450 mV at 1200 mV | |
| [ 0.073188] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered | |
| [ 0.075627] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered | |
| [ 0.079635] No ATAGs? | |
| [ 0.079662] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| [ 0.079672] hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| [ 0.080262] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver | |
| [ 0.081015] Serial: AMBA PL011 UART driver | |
| [ 0.095418] bio: create slab <bio-0> at 0 | |
| [ 0.097748] mxs-dma 110000.dma-apbh: initialized | |
| [ 0.098463] brcm_osc_reg: 3300 mV | |
| [ 0.098742] brcm_reg: 3300 mV | |
| [ 0.098954] 3P3V: 3300 mV | |
| [ 0.099225] usb_h1_vbus: 5000 mV | |
| [ 0.099513] usb_otg_vbus: 5000 mV | |
| [ 0.099840] vgaarb: loaded | |
| [ 0.100596] SCSI subsystem initialized | |
| [ 0.101062] usbcore: registered new interface driver usbfs | |
| [ 0.101125] usbcore: registered new interface driver hub | |
| [ 0.101232] usbcore: registered new device driver usb | |
| [ 0.101378] usbphy_nop1.11 supply vcc not found, using dummy regulator | |
| [ 0.101501] usbphy_nop2.12 supply vcc not found, using dummy regulator | |
| [ 0.103031] i2c i2c-0: IMX I2C adapter registered | |
| [ 0.103659] i2c i2c-1: IMX I2C adapter registered | |
| [ 0.103933] media: Linux media interface: v0.10 | |
| [ 0.103986] Linux video capture interface: v2.00 | |
| [ 0.104080] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.104089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.104112] PTP clock support registered | |
| [ 0.106529] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) | |
| [ 0.109525] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) | |
| [ 0.110267] MIPI CSI2 driver module loaded | |
| [ 0.110358] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.111326] NetLabel: Initializing | |
| [ 0.111337] NetLabel: domain hash size = 128 | |
| [ 0.111345] NetLabel: protocols = UNLABELED CIPSOv4 | |
| [ 0.111395] NetLabel: unlabeled traffic allowed by default | |
| [ 0.111662] Switched to clocksource mxc_timer1 | |
| [ 0.123925] NET: Registered protocol family 2 | |
| [ 0.124689] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| [ 0.124769] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| [ 0.124903] TCP: Hash tables configured (established 8192 bind 8192) | |
| [ 0.124975] TCP: reno registered | |
| [ 0.124990] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| [ 0.125039] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| [ 0.125367] NET: Registered protocol family 1 | |
| [ 0.125737] RPC: Registered named UNIX socket transport module. | |
| [ 0.125747] RPC: Registered udp transport module. | |
| [ 0.125754] RPC: Registered tcp transport module. | |
| [ 0.125761] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.126327] hw perfevents: enabled with ARMv7_Cortex_A9 PMU driver, 7 counters available | |
| [ 0.127844] pureg-dummy: no parameters | |
| [ 0.128899] imx6_busfreq busfreq.14: DDR medium rate not supported. | |
| [ 0.129468] Bus freq driver module loaded | |
| [ 0.130288] futex hash table entries: 512 (order: 3, 32768 bytes) | |
| [ 0.130527] audit: initializing netlink subsys (disabled) | |
| [ 0.130569] audit: type=2000 audit(0.129:1): initialized | |
| [ 0.341855] zbud: loaded | |
| [ 0.342428] VFS: Disk quotas dquot_6.5.2 | |
| [ 0.342729] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| [ 0.345378] NFS: Registering the id_resolver key type | |
| [ 0.345435] Key type id_resolver registered | |
| [ 0.345445] Key type id_legacy registered | |
| [ 0.345466] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.345501] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
| [ 0.346051] fuse init (API version 7.22) | |
| [ 0.346536] msgmni has been set to 2002 | |
| [ 0.346894] Key type big_key registered | |
| [ 0.359909] alg: No test for stdrng (krng) | |
| [ 0.360139] NET: Registered protocol family 38 | |
| [ 0.360225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) | |
| [ 0.360323] io scheduler noop registered | |
| [ 0.360537] io scheduler cfq registered | |
| [ 0.360577] io scheduler bfq registered (default) | |
| [ 0.360585] BFQ I/O-scheduler version: v7r5 | |
| [ 0.363184] mxc_sdc_fb fb.27: register mxc display driver hdmi | |
| [ 0.363357] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1 | |
| [ 0.363383] fbcvt: 1920x1080@60: CVT Name - 2.073M9 | |
| [ 0.395743] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) | |
| [ 0.467161] Console: switching to colour frame buffer device 240x67 | |
| [ 0.502233] imx-sdma 20ec000.sdma: no iram assigned, using external mem | |
| [ 0.503218] imx-sdma 20ec000.sdma: loaded firmware 1.1 | |
| [ 0.505740] imx-sdma 20ec000.sdma: initialized | |
| [ 0.506299] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.507528] Serial: IMX driver | |
| [ 0.507834] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX | |
| [ 1.411719] console [ttymxc0] enabled | |
| [ 1.416193] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX | |
| [ 1.425193] serial: Freescale lpuart driver | |
| [ 1.430625] [drm] Initialized drm 1.1.0 20060810 | |
| [ 1.435654] [drm] Initialized vivante 1.0.0 20120216 on minor 0 | |
| [ 1.448920] brd: module loaded | |
| [ 1.452160] loop: module loaded | |
| [ 1.456191] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044 | |
| [ 1.463884] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000 | |
| [ 1.471395] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000 | |
| [ 1.479080] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 | |
| [ 1.489571] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled | |
| [ 1.496588] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode | |
| [ 1.505413] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst | |
| [ 1.516064] scsi0 : ahci_platform | |
| [ 1.519795] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71 | |
| [ 1.529778] libphy: Fixed MDIO Bus: probed | |
| [ 1.534809] 2188000.ethernet supply phy not found, using dummy regulator | |
| [ 1.548521] libphy: fec_enet_mii_bus: probed | |
| [ 1.553441] fec 2188000.ethernet eth0: registered PHC device 0 | |
| [ 1.560149] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 1.566714] ehci-pci: EHCI PCI platform driver | |
| [ 1.571251] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 1.577465] ohci-pci: OHCI PCI platform driver | |
| [ 1.581472] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_read_edid HDMI in HDMI mode | |
| [ 1.589124] uhci_hcd: USB Universal Host Controller Interface driver | |
| [ 1.589700] usbcore: registered new interface driver usb-storage | |
| [ 1.589741] usbcore: registered new interface driver ums-usbat | |
| [ 1.589872] usbcore: registered new interface driver usbserial | |
| [ 1.589911] usbcore: registered new interface driver usbserial_generic | |
| [ 1.589948] usbserial: USB Serial support registered for generic | |
| [ 1.590477] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator | |
| [ 1.596035] ci_hdrc ci_hdrc.0: EHCI Host Controller | |
| [ 1.596251] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 | |
| [ 1.602695] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 | |
| [ 1.602862] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| [ 1.602871] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.602878] usb usb1: Product: EHCI Host Controller | |
| [ 1.602885] usb usb1: Manufacturer: Linux 3.14.14+g4a2f77e ehci_hcd | |
| [ 1.602892] usb usb1: SerialNumber: ci_hdrc.0 | |
| [ 1.603568] hub 1-0:1.0: USB hub found | |
| [ 1.603603] hub 1-0:1.0: 1 port detected | |
| [ 1.607218] ci_hdrc ci_hdrc.1: doesn't support gadget | |
| [ 1.607231] ci_hdrc ci_hdrc.1: EHCI Host Controller | |
| [ 1.607442] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 | |
| [ 1.613707] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 | |
| [ 1.613865] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| [ 1.613873] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 1.613879] usb usb2: Product: EHCI Host Controller | |
| [ 1.613885] usb usb2: Manufacturer: Linux 3.14.14+g4a2f77e ehci_hcd | |
| [ 1.613890] usb usb2: SerialNumber: ci_hdrc.1 | |
| [ 1.614455] hub 2-0:1.0: USB hub found | |
| [ 1.614495] hub 2-0:1.0: 1 port detected | |
| [ 1.615269] mousedev: PS/2 mouse device common for all mice | |
| [ 1.638106] rtc-pcf8523 0-0068: RTC reports battery is low | |
| [ 1.759734] rtc-pcf8523 0-0068: rtc core: registered rtc-pcf8523 as rtc0 | |
| [ 1.760285] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1 | |
| [ 1.760383] i2c /dev entries driver | |
| [ 1.762647] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) | |
| [ 1.763056] device-mapper: uevent: version 1.0.3 | |
| [ 1.763406] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com | |
| [ 1.763739] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.763742] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.763744] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.764543] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode | |
| [ 1.765911] mmc0: no vqmmc regulator found | |
| [ 1.837697] ata1: SATA link down (SStatus 0 SControl 300) | |
| [ 1.837739] ahci-imx 2200000.sata: no device found, disabling link. | |
| [ 1.837746] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug | |
| [ 1.906721] usb 1-1: new low-speed USB device number 2 using ci_hdrc | |
| [ 2.033884] usb 1-1: New USB device found, idVendor=046d, idProduct=c058 | |
| [ 2.033892] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| [ 2.033898] usb 1-1: Product: USB Optical Mouse | |
| [ 2.033904] usb 1-1: Manufacturer: Logitech | |
| [ 2.038702] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA | |
| [ 2.039257] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode | |
| [ 2.039585] mmc1: no vqmmc regulator found | |
| [ 2.039901] 2194000.usdhc supply card-external-vcc not found, using dummy regulator | |
| [ 2.110685] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA | |
| [ 2.187048] usb 2-1: new high-speed USB device number 2 using ci_hdrc | |
| [ 2.314611] usb 2-1: New USB device found, idVendor=04b4, idProduct=6570 | |
| [ 2.321376] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| [ 2.328573] usb 2-1: Product: USB2.0 Hub | |
| [ 2.333920] hub 2-1:1.0: USB hub found | |
| [ 2.338092] hub 2-1:1.0: 4 ports detected | |
| [ 2.447062] Galcore version 4.6.9.9754 | |
| [ 2.481715] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed | |
| [ 2.492012] mxc_asrc 2034000.asrc: mxc_asrc registered | |
| [ 2.497909] mxc_vpu 2040000.vpu: VPU initialized | |
| [ 2.505257] mxc_hdmi_cec hdmi_cec.16: HDMI CEC initialized | |
| [ 2.513038] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 2.521184] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 2.539365] input: Logitech USB Optical Mouse as /devices/soc0/soc.1/2100000.aips-bus/2184000.usb/ci_hdrc.0/usb1/1-1/1-1:1.0/0003:046D:C058.0001/input/input0 | |
| [ 2.556209] hid-generic 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-ci_hdrc.0-1/input0 | |
| [ 2.571550] usbcore: registered new interface driver usbhid | |
| [ 2.579199] usbhid: USB HID core driver | |
| [ 2.589471] sgtl5000 0-000a: sgtl5000 revision 0x11 | |
| [ 2.641493] 0-000a: 1200 mV normal | |
| [ 2.645126] sgtl5000 0-000a: Using internal LDO instead of VDDD | |
| [ 2.651384] sgtl5000 0-000a: ldo_regulator_enable(): enabled 0 | |
| [ 2.651479] usb 2-1.1: new low-speed USB device number 3 using ci_hdrc | |
| [ 2.653142] mmc1: host does not support reading read-only switch. assuming write-enable. | |
| [ 2.659202] mmc1: new high speed SDHC card at address 59b4 | |
| [ 2.677460] mmcblk0: mmc1:59b4 00000 14.9 GiB | |
| [ 2.683083] mmcblk0: p1 p2 | |
| [ 2.700339] imx-sgtl5000 sound-sgtl5000.24: sgtl5000 <-> 2028000.ssi mapping ok | |
| [ 2.712641] imx-spdif sound-spdif.25: snd-soc-dummy-dai <-> 2004000.spdif mapping ok | |
| [ 2.738498] imx-audio-hdmi sound-hdmi.26: hdmi-hifi <-> hdmi_audio.15 mapping ok | |
| [ 2.748158] oprofile: using timer interrupt. | |
| [ 2.752772] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 2.758186] TCP: cubic registered | |
| [ 2.761547] Initializing XFRM netlink socket | |
| [ 2.766433] NET: Registered protocol family 10 | |
| [ 2.770947] usb 2-1.1: New USB device found, idVendor=04d9, idProduct=1702 | |
| [ 2.777874] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| [ 2.785210] usb 2-1.1: Product: USB Keyboard | |
| [ 2.789505] usb 2-1.1: Manufacturer: | |
| [ 2.793717] mip6: Mobile IPv6 | |
| [ 2.796739] NET: Registered protocol family 17 | |
| [ 2.801272] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 2.805527] Key type dns_resolver registered | |
| [ 2.812100] input: USB Keyboard as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1:1.0/0003:04D9:1702.0002/input/input1 | |
| [ 2.826383] registered taskstats version 1 | |
| [ 2.830840] hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-ci_hdrc.1-1.1/input0 | |
| [ 2.831077] regulator-dummy: disabling | |
| [ 2.848508] rtc-pcf8523 0-0068: hctosys: unable to read the hardware clock | |
| [ 2.864642] ALSA device list: | |
| [ 2.867687] #0: On-board Codec | |
| [ 2.870942] #1: imx-spdif | |
| [ 2.871212] input: USB Keyboard as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1:1.1/0003:04D9:1702.0003/input/input2 | |
| [ 2.871569] hid-generic 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-ci_hdrc.1-1.1/input1 | |
| [ 2.898825] #2: imx-hdmi-soc | |
| [ 2.902171] md: Waiting for all devices to be available before autodetect | |
| [ 2.909006] md: If you don't use raid, use raid=noautodetect | |
| [ 2.915286] md: Autodetecting RAID arrays. | |
| [ 2.919416] md: Scanned 0 and added 0 devices. | |
| [ 2.923880] md: autorun ... | |
| [ 2.926695] md: ... autorun DONE. | |
| [ 2.941185] kjournald starting. Commit interval 5 seconds | |
| [ 2.966946] EXT3-fs (mmcblk0p2): using internal journal | |
| [ 2.972194] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode | |
| [ 2.979111] VFS: Mounted root (ext3 filesystem) on device 179:2. | |
| [ 2.987472] devtmpfs: mounted | |
| [ 2.990798] Freeing unused kernel memory: 364K (80a09000 - 80a64000) | |
| sh: cannot set terminal process group (-1): Inappropriate ioctl for device | |
| sh: no job control in this shell | |
| sh-4.3# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment