Skip to content

Instantly share code, notes, and snippets.

@leon-anavi

leon-anavi/kernel-panic-tizen-raspberry-pi-2

Created April 20, 2015 23:58
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save leon-anavi/386e81df83b0b5b1d62d to your computer and use it in GitHub Desktop.
Save leon-anavi/386e81df83b0b5b1d62d to your computer and use it in GitHub Desktop.
Download ZIP
kernel-panic-tizen-raspberry-pi-2
Raw
kernel-panic-tizen-raspberry-pi-2
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.5 (leon@leon-desktop-G1) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Tue Apr 21 01:23:39 EEST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 2 Model B
[ 0.000000] cma: Reserved 8 MiB at 0x3a800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 241664
[ 0.000000] free_area_init_node: node 0, pgdat 80854440, node_mem_map ba093000
[ 0.000000] Normal zone: 1888 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ba05d000 s12864 r8192 d24000 u45056
[ 0.000000] pcpu-alloc: s12864 r8192 d24000 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239776
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2709.boardrev=0xa01041 bcm2709.serial=0xe9a19f3 smsc95xx.macaddr=B8:27:EB:9A:19:F3 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 init=/lib/systemd/systemd rw rootwait debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940532K/966656K available (5866K kernel code, 377K rwdata, 1880K rodata, 404K init, 771K bss, 26124K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xbb800000 - 0xff000000 (1080 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80798b04 (7747 kB)
[ 0.000000] .init : 0x80799000 - 0x807fe000 ( 404 kB)
[ 0.000000] .data : 0x807fe000 - 0x8085c77c ( 378 kB)
[ 0.000000] .bss : 0x8085c77c - 0x8091d654 ( 772 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:480
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[ 0.000014] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.000036] Switching to timer-based delay loop, resolution 52ns
[ 0.000335] Console: colour dummy device 80x30
[ 0.001932] console [tty1] enabled
[ 0.001982] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.002064] pid_max: default: 32768 minimum: 301
[ 0.002520] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002581] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003880] Initializing cgroup subsys memory
[ 0.003972] Initializing cgroup subsys devices
[ 0.004024] Initializing cgroup subsys freezer
[ 0.004075] Initializing cgroup subsys net_cls
[ 0.004137] Initializing cgroup subsys blkio
[ 0.004252] CPU: Testing write buffer coherency: ok
[ 0.004364] ftrace: allocating 20009 entries in 59 pages
[ 0.052967] CPU0: update cpu_capacity 1024
[ 0.053047] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.053084] [bcm2709_smp_prepare_cpus] enter
[ 0.053255] Setting up static identity map for 0x54a418 - 0x54a470
[ 0.112903] [bcm2709_boot_secondary] cpu:1 started (0) 16
[ 0.113281] CPU1: Booted secondary processor
[ 0.113289] [bcm2709_secondary_init] enter cpu:1
[ 0.113347] CPU1: update cpu_capacity 1024
[ 0.113356] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.132872] [bcm2709_boot_secondary] cpu:2 started (0) 18
[ 0.133200] CPU2: Booted secondary processor
[ 0.133207] [bcm2709_secondary_init] enter cpu:2
[ 0.133240] CPU2: update cpu_capacity 1024
[ 0.133248] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.152933] [bcm2709_boot_secondary] cpu:3 started (0) 18
[ 0.153158] CPU3: Booted secondary processor
[ 0.153165] [bcm2709_secondary_init] enter cpu:3
[ 0.153197] CPU3: update cpu_capacity 1024
[ 0.153205] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.153304] Brought up 4 CPUs
[ 0.153431] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.153464] CPU: All CPU(s) started in SVC mode.
[ 0.154509] devtmpfs: initialized
[ 0.177853] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.180063] pinctrl core: initialized pinctrl subsystem
[ 0.183049] NET: Registered protocol family 16
[ 0.188756] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.212726] cpuidle: using governor ladder
[ 0.242757] cpuidle: using governor menu
[ 0.243241] bcm2709.uart_clock = 3000000
[ 0.245961] No ATAGs?
[ 0.246028] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.246083] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.246144] mailbox: Broadcom VideoCore Mailbox driver
[ 0.246273] bcm2708_vcio: mailbox at f300b880
[ 0.246379] bcm_power: Broadcom power driver
[ 0.246416] bcm_power_open() -> 0
[ 0.246444] bcm_power_request(0, 8)
[ 0.747153] bcm_mailbox_read -> 00000080, 0
[ 0.747186] bcm_power_request -> 0
[ 0.747323] Serial: AMBA PL011 UART driver
[ 0.747490] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[ 1.298622] console [ttyAMA0] enabled
[ 1.376257] SCSI subsystem initialized
[ 1.380285] usbcore: registered new interface driver usbfs
[ 1.385950] usbcore: registered new interface driver hub
[ 1.391407] usbcore: registered new device driver usb
[ 1.398440] Switched to clocksource arch_sys_counter
[ 1.433565] FS-Cache: Loaded
[ 1.436823] CacheFiles: Loaded
[ 1.452055] NET: Registered protocol family 2
[ 1.457694] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.464925] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.471604] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.478080] TCP: reno registered
[ 1.481348] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.487333] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.494079] NET: Registered protocol family 1
[ 1.498900] RPC: Registered named UNIX socket transport module.
[ 1.504841] RPC: Registered udp transport module.
[ 1.509642] RPC: Registered tcp transport module.
[ 1.514362] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.521946] bcm2708_dma: DMA manager at f3007000
[ 1.526744] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 1.536739] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.543252] audit: initializing netlink subsys (disabled)
[ 1.548793] audit: type=2000 audit(1.329:1): initialized
[ 1.570075] VFS: Disk quotas dquot_6.5.2
[ 1.574391] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.584055] FS-Cache: Netfs 'nfs' registered for caching
[ 1.590395] NFS: Registering the id_resolver key type
[ 1.595528] Key type id_resolver registered
[ 1.599782] Key type id_legacy registered
[ 1.604911] msgmni has been set to 1852
[ 1.610488] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.618113] io scheduler noop registered
[ 1.622095] io scheduler deadline registered
[ 1.626707] io scheduler cfq registered (default)
[ 1.634028] BCM2708FB: allocated DMA memory fac00000
[ 1.639076] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 1.673901] Console: switching to colour frame buffer device 210x65
[ 1.698915] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[ 1.786766] uart-pl011 dev:f1: no DMA platform data
[ 1.791879] kgdb: Registered I/O driver kgdboc.
[ 1.819073] vc-cma: Videocore CMA driver
[ 1.823084] vc-cma: vc_cma_base = 0x00000000
[ 1.827875] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 1.833402] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 1.850687] brd: module loaded
[ 1.859869] loop: module loaded
[ 1.863469] vchiq: vchiq_init_state: slot_zero = 0xba800000, is_master = 0
[ 1.871303] Loading iSCSI transport class v2.0-870.
[ 1.877195] usbcore: registered new interface driver smsc95xx
[ 1.883152] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.089346] Core Release: 2.80a
[ 2.092579] Setting default values for core params
[ 2.097497] Finished setting default values for core params
[ 2.303601] Using Buffer DMA mode
[ 2.306988] Periodic Transfer Interrupt Enhancement - disabled
[ 2.312937] Multiprocessor Interrupt Enhancement - disabled
[ 2.318624] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.323067] Dedicated Tx FIFOs mode
[ 2.326982] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[ 2.337027] FIQ FSM acceleration enabled for :
[ 2.337027] Non-periodic Split Transactions
[ 2.337027] Periodic Split Transactions
[ 2.337027] High-Speed Isochronous Endpoints
[ 2.354020] dwc_otg: Microframe scheduler enabled
[ 2.358878] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803f68c0
[ 2.364914] WARN::hcd_init_fiq:413: FIQ ASM at 0x803f6c30 length 36
[ 2.371297] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb806000
[ 2.382306] dwc_otg bcm2708_usb: DWC OTG Controller
[ 2.392150] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 2.404363] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 2.414806] Init: Port Power? op_state=1
[ 2.423604] Init: Power Port (0)
[ 2.431981] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.443715] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.455925] usb usb1: Product: DWC OTG Controller
[ 2.465602] usb usb1: Manufacturer: Linux 3.18.5 dwc_otg_hcd
[ 2.476223] usb usb1: SerialNumber: bcm2708_usb
[ 2.486676] hub 1-0:1.0: USB hub found
[ 2.495400] hub 1-0:1.0: 1 port detected
[ 2.504687] dwc_otg: FIQ enabled
[ 2.512716] dwc_otg: NAK holdoff enabled
[ 2.521370] dwc_otg: FIQ split-transaction FSM enabled
[ 2.531276] Module dwc_common_port init
[ 2.540184] usbcore: registered new interface driver usb-storage
[ 2.551261] mousedev: PS/2 mouse device common for all mice
[ 2.562338] bcm2835-cpufreq: min=600000 max=900000
[ 2.572225] sdhci: Secure Digital Host Controller Interface driver
[ 2.583214] sdhci: Copyright(c) Pierre Ossman
[ 2.592570] DMA channels allocated for the MMC driver
[ 2.628472] Load BCM2835 MMC driver
[ 2.641751] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.652875] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.668222] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.678792] usbcore: registered new interface driver usbhid
[ 2.689292] usbhid: USB HID core driver
[ 2.702421] TCP: cubic registered
[ 2.708570] Indeed it is in host mode hprt0 = 00021501
[ 2.720558] Initializing XFRM netlink socket
[ 2.729651] NET: Registered protocol family 17
[ 2.739070] Key type dns_resolver registered
[ 2.748631] Registering SWP/SWPB emulation handler
[ 2.759217] registered taskstats version 1
[ 2.768378] vc-sm: Videocore shared memory driver
[ 2.777966] [vc_sm_connected_init]: start
[ 2.787677] [vc_sm_connected_init]: end - returning 0
[ 2.799021] Waiting for root device /dev/mmcblk0p2...
[ 2.813956] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.829100] mmc0: new high speed SDHC card at address 59b4
[ 2.840209] mmcblk0: mmc0:59b4 00000 14.9 GiB
[ 2.851020] mmcblk0: p1 p2
[ 2.878527] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.890059] Indeed it is in host mode hprt0 = 00001101
[ 2.940088] EXT4-fs (mmcblk0p2): recovery complete
[ 2.949781] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.962849] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.998358] devtmpfs: mounted
[ 3.007129] Freeing unused kernel memory: 404K (80799000 - 807fe000)
[ 3.098854] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.111459] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.124724] hub 1-1:1.0: USB hub found
[ 3.133837] hub 1-1:1.0: 5 ports detected
[ 3.175676] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
[ 3.175676]
[ 3.195012] CPU: 1 PID: 1 Comm: systemd Not tainted 3.18.5 #1
[ 3.205942] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.218931] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.231398] [<805428b4>] (dump_stack) from [<80541c94>] (panic+0xb0/0x230)
[ 3.243500] [<80541c94>] (panic) from [<80029ab4>] (complete_and_exit+0x0/0x2c)
[ 3.256053] [<80029ab4>] (complete_and_exit) from [<80029b5c>] (do_group_exit+0x5c/0xc8)
[ 3.269426] [<80029b5c>] (do_group_exit) from [<80029be8>] (__wake_up_parent+0x0/0x30)
[ 3.282682] [<80029be8>] (__wake_up_parent) from [<8000ee00>] (ret_fast_syscall+0x0/0x48)
[ 3.296202] CPU2: stopping
[ 3.304170] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.18.5 #1
[ 3.315395] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.328509] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.341131] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.353929] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.366242] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.378570] Exception stack(0xb98c7f48 to 0xb98c7f90)
[ 3.389107] 7f40: ffffffed 00000000 ffffffed 00000000 b98c6000 00000000
[ 3.402873] 7f60: 8081cdd4 00000000 00000000 8081cd70 808578bc b98c7f9c 8081dccc b98c7f90
[ 3.416674] 7f80: 800101b8 800101bc 60000113 ffffffff
[ 3.427339] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.440410] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.454386] [<8005f168>] (cpu_startup_entry) from [<8001555c>] (secondary_start_kernel+0x144/0x150)
[ 3.469185] [<8001555c>] (secondary_start_kernel) from [<000086a4>] (0x86a4)
[ 3.481986] CPU0: stopping
[ 3.490417] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.5 #1
[ 3.502117] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.515697] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.528764] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.541986] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.554682] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.567380] Exception stack(0x807fff00 to 0x807fff48)
[ 3.578276] ff00: ffffffed 00000000 ffffffed 00000000 807fe000 00000000 8081cdd4 00000000
[ 3.592396] ff20: 00000000 8081cd70 808578bc 807fff54 8081dccc 807fff48 800101b8 800101bc
[ 3.606544] ff40: 60000113 ffffffff
[ 3.615994] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.629459] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.643850] [<8005f168>] (cpu_startup_entry) from [<80540a38>] (rest_init+0x94/0x98)
[ 3.657758] [<80540a38>] (rest_init) from [<80799d1c>] (start_kernel+0x3d0/0x3dc)
[ 3.671427] CPU3: stopping
[ 3.680297] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.18.5 #1
[ 3.692464] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.706522] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.720037] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.733688] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.746830] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.759966] Exception stack(0xb98c9f48 to 0xb98c9f90)
[ 3.771259] 9f40: ffffffed 00000000 ffffffed 00000000 b98c8000 00000000
[ 3.785760] 9f60: 8081cdd4 00000000 00000000 8081cd70 808578bc b98c9f9c 8081dccc b98c9f90
[ 3.800290] 9f80: 800101b8 800101bc 60000113 ffffffff
[ 3.811678] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.825435] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.840100] [<8005f168>] (cpu_startup_entry) from [<8001555c>] (secondary_start_kernel+0x144/0x150)
[ 3.855572] [<8001555c>] (secondary_start_kernel) from [<000086a4>] (0x86a4)
PANIC: Attempted to kill init! exitcode=0x00007f00
Entering kdb (current=0xb9890000, pid 1) on processor 1 due to Keyboard Entry
[1]kdb> [ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.5 (leon@leon-desktop-G1) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Tue Apr 21 01:23:39 EEST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 2 Model B
[ 0.000000] cma: Reserved 8 MiB at 0x3a800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 241664
[ 0.000000] free_area_init_node: node 0, pgdat 80854440, node_mem_map ba093000
[ 0.000000] Normal zone: 1888 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ba05d000 s12864 r8192 d24000 u45056
[ 0.000000] pcpu-alloc: s12864 r8192 d24000 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239776
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2709.boardrev=0xa01041 bcm2709.serial=0xe9a19f3 smsc95xx.macaddr=B8:27:EB:9A:19:F3 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 init=/lib/systemd/systemd rw rootwait debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940532K/966656K available (5866K kernel code, 377K rwdata, 1880K rodata, 404K init, 771K bss, 26124K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xbb800000 - 0xff000000 (1080 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80798b04 (7747 kB)
[ 0.000000] .init : 0x80799000 - 0x807fe000 ( 404 kB)
[ 0.000000] .data : 0x807fe000 - 0x8085c77c ( 378 kB)
[ 0.000000] .bss : 0x8085c77c - 0x8091d654 ( 772 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:480
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[ 0.000013] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.000036] Switching to timer-based delay loop, resolution 52ns
[ 0.000332] Console: colour dummy device 80x30
[ 0.001962] console [tty1] enabled
[ 0.002010] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.002093] pid_max: default: 32768 minimum: 301
[ 0.002550] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002611] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003921] Initializing cgroup subsys memory
[ 0.004015] Initializing cgroup subsys devices
[ 0.004068] Initializing cgroup subsys freezer
[ 0.004119] Initializing cgroup subsys net_cls
[ 0.004179] Initializing cgroup subsys blkio
[ 0.004289] CPU: Testing write buffer coherency: ok
[ 0.004398] ftrace: allocating 20009 entries in 59 pages
[ 0.053034] CPU0: update cpu_capacity 1024
[ 0.053115] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.053152] [bcm2709_smp_prepare_cpus] enter
[ 0.053319] Setting up static identity map for 0x54a418 - 0x54a470
[ 0.112981] [bcm2709_boot_secondary] cpu:1 started (0) 16
[ 0.113368] CPU1: Booted secondary processor
[ 0.113375] [bcm2709_secondary_init] enter cpu:1
[ 0.113435] CPU1: update cpu_capacity 1024
[ 0.113443] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.132949] [bcm2709_boot_secondary] cpu:2 started (0) 16
[ 0.133277] CPU2: Booted secondary processor
[ 0.133283] [bcm2709_secondary_init] enter cpu:2
[ 0.133314] CPU2: update cpu_capacity 1024
[ 0.133322] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.153005] [bcm2709_boot_secondary] cpu:3 started (0) 18
[ 0.153229] CPU3: Booted secondary processor
[ 0.153236] [bcm2709_secondary_init] enter cpu:3
[ 0.153266] CPU3: update cpu_capacity 1024
[ 0.153274] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.153371] Brought up 4 CPUs
[ 0.153491] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.153523] CPU: All CPU(s) started in SVC mode.
[ 0.154559] devtmpfs: initialized
[ 0.177942] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.180129] pinctrl core: initialized pinctrl subsystem
[ 0.183121] NET: Registered protocol family 16
[ 0.188829] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.212803] cpuidle: using governor ladder
[ 0.242835] cpuidle: using governor menu
[ 0.243316] bcm2709.uart_clock = 3000000
[ 0.246024] No ATAGs?
[ 0.246091] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.246146] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.246205] mailbox: Broadcom VideoCore Mailbox driver
[ 0.246337] bcm2708_vcio: mailbox at f300b880
[ 0.246443] bcm_power: Broadcom power driver
[ 0.246480] bcm_power_open() -> 0
[ 0.246507] bcm_power_request(0, 8)
[ 0.747213] bcm_mailbox_read -> 00000080, 0
[ 0.747246] bcm_power_request -> 0
[ 0.747388] Serial: AMBA PL011 UART driver
[ 0.747553] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[ 1.298681] console [ttyAMA0] enabled
[ 1.376353] SCSI subsystem initialized
[ 1.380380] usbcore: registered new interface driver usbfs
[ 1.386048] usbcore: registered new interface driver hub
[ 1.391507] usbcore: registered new device driver usb
[ 1.398534] Switched to clocksource arch_sys_counter
[ 1.433644] FS-Cache: Loaded
[ 1.436898] CacheFiles: Loaded
[ 1.452170] NET: Registered protocol family 2
[ 1.457794] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.465025] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.471704] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.478177] TCP: reno registered
[ 1.481442] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.487428] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.494167] NET: Registered protocol family 1
[ 1.498990] RPC: Registered named UNIX socket transport module.
[ 1.504931] RPC: Registered udp transport module.
[ 1.509733] RPC: Registered tcp transport module.
[ 1.514452] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.522033] bcm2708_dma: DMA manager at f3007000
[ 1.526825] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 1.536823] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.543338] audit: initializing netlink subsys (disabled)
[ 1.548882] audit: type=2000 audit(1.329:1): initialized
[ 1.570167] VFS: Disk quotas dquot_6.5.2
[ 1.574486] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.584156] FS-Cache: Netfs 'nfs' registered for caching
[ 1.590482] NFS: Registering the id_resolver key type
[ 1.595608] Key type id_resolver registered
[ 1.599860] Key type id_legacy registered
[ 1.604980] msgmni has been set to 1852
[ 1.610567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.618191] io scheduler noop registered
[ 1.622174] io scheduler deadline registered
[ 1.626783] io scheduler cfq registered (default)
[ 1.634108] BCM2708FB: allocated DMA memory fac00000
[ 1.639156] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 1.674022] Console: switching to colour frame buffer device 210x65
[ 1.699031] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[ 1.786905] uart-pl011 dev:f1: no DMA platform data
[ 1.792019] kgdb: Registered I/O driver kgdboc.
[ 1.819152] vc-cma: Videocore CMA driver
[ 1.823163] vc-cma: vc_cma_base = 0x00000000
[ 1.827953] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 1.833480] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 1.850804] brd: module loaded
[ 1.859963] loop: module loaded
[ 1.863553] vchiq: vchiq_init_state: slot_zero = 0xba800000, is_master = 0
[ 1.871376] Loading iSCSI transport class v2.0-870.
[ 1.877273] usbcore: registered new interface driver smsc95xx
[ 1.883231] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.089429] Core Release: 2.80a
[ 2.092660] Setting default values for core params
[ 2.097577] Finished setting default values for core params
[ 2.303692] Using Buffer DMA mode
[ 2.307080] Periodic Transfer Interrupt Enhancement - disabled
[ 2.313028] Multiprocessor Interrupt Enhancement - disabled
[ 2.318714] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.323156] Dedicated Tx FIFOs mode
[ 2.327073] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[ 2.337122] FIQ FSM acceleration enabled for :
[ 2.337122] Non-periodic Split Transactions
[ 2.337122] Periodic Split Transactions
[ 2.337122] High-Speed Isochronous Endpoints
[ 2.354116] dwc_otg: Microframe scheduler enabled
[ 2.358976] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803f68c0
[ 2.365010] WARN::hcd_init_fiq:413: FIQ ASM at 0x803f6c30 length 36
[ 2.371393] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb806000
[ 2.382408] dwc_otg bcm2708_usb: DWC OTG Controller
[ 2.392253] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 2.404467] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 2.414912] Init: Port Power? op_state=1
[ 2.423708] Init: Power Port (0)
[ 2.432094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.443828] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.456039] usb usb1: Product: DWC OTG Controller
[ 2.465717] usb usb1: Manufacturer: Linux 3.18.5 dwc_otg_hcd
[ 2.476335] usb usb1: SerialNumber: bcm2708_usb
[ 2.486777] hub 1-0:1.0: USB hub found
[ 2.495481] hub 1-0:1.0: 1 port detected
[ 2.504734] dwc_otg: FIQ enabled
[ 2.512723] dwc_otg: NAK holdoff enabled
[ 2.521383] dwc_otg: FIQ split-transaction FSM enabled
[ 2.531290] Module dwc_common_port init
[ 2.540194] usbcore: registered new interface driver usb-storage
[ 2.551260] mousedev: PS/2 mouse device common for all mice
[ 2.562291] bcm2835-cpufreq: min=600000 max=900000
[ 2.572224] sdhci: Secure Digital Host Controller Interface driver
[ 2.583246] sdhci: Copyright(c) Pierre Ossman
[ 2.592594] DMA channels allocated for the MMC driver
[ 2.628566] Load BCM2835 MMC driver
[ 2.641838] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.653950] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.668290] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.678861] usbcore: registered new interface driver usbhid
[ 2.690358] usbhid: USB HID core driver
[ 2.703490] TCP: cubic registered
[ 2.708664] Indeed it is in host mode hprt0 = 00021501
[ 2.721625] Initializing XFRM netlink socket
[ 2.730711] NET: Registered protocol family 17
[ 2.740126] Key type dns_resolver registered
[ 2.749709] Registering SWP/SWPB emulation handler
[ 2.760315] registered taskstats version 1
[ 2.769568] vc-sm: Videocore shared memory driver
[ 2.779177] [vc_sm_connected_init]: start
[ 2.788924] [vc_sm_connected_init]: end - returning 0
[ 2.800274] Waiting for root device /dev/mmcblk0p2...
[ 2.815875] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.831068] mmc0: new high speed SDHC card at address 59b4
[ 2.842204] mmcblk0: mmc0:59b4 00000 14.9 GiB
[ 2.853081] mmcblk0: p1 p2
[ 2.878642] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.890174] Indeed it is in host mode hprt0 = 00001101
[ 2.937987] EXT4-fs (mmcblk0p2): recovery complete
[ 2.947726] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.960847] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.996436] devtmpfs: mounted
[ 3.005228] Freeing unused kernel memory: 404K (80799000 - 807fe000)
[ 3.078995] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.091117] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.105066] hub 1-1:1.0: USB hub found
[ 3.114021] hub 1-1:1.0: 5 ports detected
[ 3.179400] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
[ 3.179400]
[ 3.198733] CPU: 1 PID: 1 Comm: systemd Not tainted 3.18.5 #1
[ 3.209662] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.222648] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.235116] [<805428b4>] (dump_stack) from [<80541c94>] (panic+0xb0/0x230)
[ 3.247209] [<80541c94>] (panic) from [<80029ab4>] (complete_and_exit+0x0/0x2c)
[ 3.259764] [<80029ab4>] (complete_and_exit) from [<80029b5c>] (do_group_exit+0x5c/0xc8)
[ 3.273134] [<80029b5c>] (do_group_exit) from [<80029be8>] (__wake_up_parent+0x0/0x30)
[ 3.286390] [<80029be8>] (__wake_up_parent) from [<8000ee00>] (ret_fast_syscall+0x0/0x48)
[ 3.299909] CPU0: stopping
[ 3.307877] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.5 #1
[ 3.319104] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.332220] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.344844] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.357646] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.369959] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.382291] Exception stack(0x807fff00 to 0x807fff48)
[ 3.392829] ff00: ffffffed 00000000 ffffffed 00000000 807fe000 00000000 8081cdd4 00000000
[ 3.406600] ff20: 00000000 8081cd70 808578bc 807fff54 8081dccc 807fff48 800101b8 800101bc
[ 3.420402] ff40: 60000113 ffffffff
[ 3.429479] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.442553] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.456537] [<8005f168>] (cpu_startup_entry) from [<80540a38>] (rest_init+0x94/0x98)
[ 3.470015] [<80540a38>] (rest_init) from [<80799d1c>] (start_kernel+0x3d0/0x3dc)
[ 3.483233] CPU3: stopping
[ 3.491648] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.18.5 #1
[ 3.503333] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.516896] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.529946] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.543157] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.555839] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.568514] Exception stack(0xb98c9f48 to 0xb98c9f90)
[ 3.579384] 9f40: ffffffed 00000000 ffffffed 00000000 b98c8000 00000000
[ 3.593480] 9f60: 8081cdd4 00000000 00000000 8081cd70 808578bc b98c9f9c 8081dccc b98c9f90
[ 3.607611] 9f80: 800101b8 800101bc 60000113 ffffffff
[ 3.618628] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.632072] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.646442] [<8005f168>] (cpu_startup_entry) from [<8001555c>] (secondary_start_kernel+0x144/0x150)
[ 3.661656] [<8001555c>] (secondary_start_kernel) from [<000086a4>] (0x86a4)
[ 3.674890] CPU2: stopping
[ 3.683760] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.18.5 #1
[ 3.695929] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.709995] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.723512] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.737175] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.750303] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.763447] Exception stack(0xb98c7f48 to 0xb98c7f90)
[ 3.774749] 7f40: ffffffed 00000000 ffffffed 00000000 b98c6000 00000000
[ 3.789247] 7f60: 8081cdd4 00000000 00000000 8081cd70 808578bc b98c7f9c 8081dccc b98c7f90
[ 3.803778] 7f80: 800101b8 800101bc 60000113 ffffffff
[ 3.815166] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.828926] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.843593] [<8005f168>] (cpu_startup_entry) from [<8001555c>] (secondary_start_kernel+0x144/0x150)
[ 3.859068] [<8001555c>] (secondary_start_kernel) from [<000086a4>] (0x86a4)
PANIC: Attempted to kill init! exitcode=0x00007f00
Entering kdb (current=0xb9890000, pid 1) on processor 1 due to Keyboard Entry
[1]kdb> [ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.5 (leon@leon-desktop-G1) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Tue Apr 21 01:23:39 EEST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 2 Model B
[ 0.000000] cma: Reserved 8 MiB at 0x3a800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 241664
[ 0.000000] free_area_init_node: node 0, pgdat 80854440, node_mem_map ba093000
[ 0.000000] Normal zone: 1888 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (8620->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ba05d000 s12864 r8192 d24000 u45056
[ 0.000000] pcpu-alloc: s12864 r8192 d24000 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239776
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2709.boardrev=0xa01041 bcm2709.serial=0xe9a19f3 smsc95xx.macaddr=B8:27:EB:9A:19:F3 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 init=/lib/systemd/systemd rw rootwait debug
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 940532K/966656K available (5866K kernel code, 377K rwdata, 1880K rodata, 404K init, 771K bss, 26124K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xbb800000 - 0xff000000 (1080 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80798b04 (7747 kB)
[ 0.000000] .init : 0x80799000 - 0x807fe000 ( 404 kB)
[ 0.000000] .data : 0x807fe000 - 0x8085c77c ( 378 kB)
[ 0.000000] .bss : 0x8085c77c - 0x8091d654 ( 772 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:480
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[ 0.000014] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.000038] Switching to timer-based delay loop, resolution 52ns
[ 0.000341] Console: colour dummy device 80x30
[ 0.001952] console [tty1] enabled
[ 0.002000] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.002083] pid_max: default: 32768 minimum: 301
[ 0.002538] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002598] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003896] Initializing cgroup subsys memory
[ 0.003985] Initializing cgroup subsys devices
[ 0.004038] Initializing cgroup subsys freezer
[ 0.004089] Initializing cgroup subsys net_cls
[ 0.004148] Initializing cgroup subsys blkio
[ 0.004262] CPU: Testing write buffer coherency: ok
[ 0.004375] ftrace: allocating 20009 entries in 59 pages
[ 0.053032] CPU0: update cpu_capacity 1024
[ 0.053111] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.053149] [bcm2709_smp_prepare_cpus] enter
[ 0.053316] Setting up static identity map for 0x54a418 - 0x54a470
[ 0.112974] [bcm2709_boot_secondary] cpu:1 started (0) 18
[ 0.113360] CPU1: Booted secondary processor
[ 0.113368] [bcm2709_secondary_init] enter cpu:1
[ 0.113425] CPU1: update cpu_capacity 1024
[ 0.113434] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.132939] [bcm2709_boot_secondary] cpu:2 started (0) 18
[ 0.133265] CPU2: Booted secondary processor
[ 0.133272] [bcm2709_secondary_init] enter cpu:2
[ 0.133304] CPU2: update cpu_capacity 1024
[ 0.133312] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.152997] [bcm2709_boot_secondary] cpu:3 started (0) 18
[ 0.153226] CPU3: Booted secondary processor
[ 0.153233] [bcm2709_secondary_init] enter cpu:3
[ 0.153265] CPU3: update cpu_capacity 1024
[ 0.153274] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.153368] Brought up 4 CPUs
[ 0.153487] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.153520] CPU: All CPU(s) started in SVC mode.
[ 0.154557] devtmpfs: initialized
[ 0.177906] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.180064] pinctrl core: initialized pinctrl subsystem
[ 0.183052] NET: Registered protocol family 16
[ 0.188780] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.212795] cpuidle: using governor ladder
[ 0.242826] cpuidle: using governor menu
[ 0.243308] bcm2709.uart_clock = 3000000
[ 0.246039] No ATAGs?
[ 0.246105] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.246161] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.246222] mailbox: Broadcom VideoCore Mailbox driver
[ 0.246353] bcm2708_vcio: mailbox at f300b880
[ 0.246457] bcm_power: Broadcom power driver
[ 0.246490] bcm_power_open() -> 0
[ 0.246515] bcm_power_request(0, 8)
[ 0.747221] bcm_mailbox_read -> 00000080, 0
[ 0.747254] bcm_power_request -> 0
[ 0.747392] Serial: AMBA PL011 UART driver
[ 0.747557] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[ 1.298687] console [ttyAMA0] enabled
[ 1.376341] SCSI subsystem initialized
[ 1.380369] usbcore: registered new interface driver usbfs
[ 1.386032] usbcore: registered new interface driver hub
[ 1.391490] usbcore: registered new device driver usb
[ 1.398524] Switched to clocksource arch_sys_counter
[ 1.433639] FS-Cache: Loaded
[ 1.436896] CacheFiles: Loaded
[ 1.452170] NET: Registered protocol family 2
[ 1.457812] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.465040] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.471719] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.478191] TCP: reno registered
[ 1.481458] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.487444] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.494187] NET: Registered protocol family 1
[ 1.499016] RPC: Registered named UNIX socket transport module.
[ 1.504958] RPC: Registered udp transport module.
[ 1.509763] RPC: Registered tcp transport module.
[ 1.514482] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.522063] bcm2708_dma: DMA manager at f3007000
[ 1.526854] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 1.536856] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.543365] audit: initializing netlink subsys (disabled)
[ 1.548907] audit: type=2000 audit(1.329:1): initialized
[ 1.570178] VFS: Disk quotas dquot_6.5.2
[ 1.574495] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.584165] FS-Cache: Netfs 'nfs' registered for caching
[ 1.590498] NFS: Registering the id_resolver key type
[ 1.595642] Key type id_resolver registered
[ 1.599894] Key type id_legacy registered
[ 1.605029] msgmni has been set to 1852
[ 1.610617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.618246] io scheduler noop registered
[ 1.622227] io scheduler deadline registered
[ 1.626838] io scheduler cfq registered (default)
[ 1.634163] BCM2708FB: allocated DMA memory fac00000
[ 1.639211] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 1.674065] Console: switching to colour frame buffer device 210x65
[ 1.699075] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[ 1.786952] uart-pl011 dev:f1: no DMA platform data
[ 1.792064] kgdb: Registered I/O driver kgdboc.
[ 1.819148] vc-cma: Videocore CMA driver
[ 1.823159] vc-cma: vc_cma_base = 0x00000000
[ 1.827948] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 1.833475] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 1.850838] brd: module loaded
[ 1.860032] loop: module loaded
[ 1.863625] vchiq: vchiq_init_state: slot_zero = 0xba800000, is_master = 0
[ 1.871451] Loading iSCSI transport class v2.0-870.
[ 1.877348] usbcore: registered new interface driver smsc95xx
[ 1.883304] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.089493] Core Release: 2.80a
[ 2.092722] Setting default values for core params
[ 2.097643] Finished setting default values for core params
[ 2.303756] Using Buffer DMA mode
[ 2.307143] Periodic Transfer Interrupt Enhancement - disabled
[ 2.313092] Multiprocessor Interrupt Enhancement - disabled
[ 2.318776] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.323218] Dedicated Tx FIFOs mode
[ 2.327135] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[ 2.337183] FIQ FSM acceleration enabled for :
[ 2.337183] Non-periodic Split Transactions
[ 2.337183] Periodic Split Transactions
[ 2.337183] High-Speed Isochronous Endpoints
[ 2.354178] dwc_otg: Microframe scheduler enabled
[ 2.359037] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803f68c0
[ 2.365071] WARN::hcd_init_fiq:413: FIQ ASM at 0x803f6c30 length 36
[ 2.371455] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb806000
[ 2.382469] dwc_otg bcm2708_usb: DWC OTG Controller
[ 2.392310] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 2.404526] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 2.414969] Init: Port Power? op_state=1
[ 2.423772] Init: Power Port (0)
[ 2.432153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.443894] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.456111] usb usb1: Product: DWC OTG Controller
[ 2.465790] usb usb1: Manufacturer: Linux 3.18.5 dwc_otg_hcd
[ 2.476414] usb usb1: SerialNumber: bcm2708_usb
[ 2.486865] hub 1-0:1.0: USB hub found
[ 2.495593] hub 1-0:1.0: 1 port detected
[ 2.504891] dwc_otg: FIQ enabled
[ 2.512921] dwc_otg: NAK holdoff enabled
[ 2.521577] dwc_otg: FIQ split-transaction FSM enabled
[ 2.531483] Module dwc_common_port init
[ 2.540402] usbcore: registered new interface driver usb-storage
[ 2.551466] mousedev: PS/2 mouse device common for all mice
[ 2.562538] bcm2835-cpufreq: min=600000 max=900000
[ 2.572425] sdhci: Secure Digital Host Controller Interface driver
[ 2.583418] sdhci: Copyright(c) Pierre Ossman
[ 2.592764] DMA channels allocated for the MMC driver
[ 2.628558] Load BCM2835 MMC driver
[ 2.641839] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.653961] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.670312] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.680886] usbcore: registered new interface driver usbhid
[ 2.692390] usbhid: USB HID core driver
[ 2.702524] TCP: cubic registered
[ 2.708658] Indeed it is in host mode hprt0 = 00021501
[ 2.722675] Initializing XFRM netlink socket
[ 2.731773] NET: Registered protocol family 17
[ 2.741200] Key type dns_resolver registered
[ 2.750793] Registering SWP/SWPB emulation handler
[ 2.761401] registered taskstats version 1
[ 2.770666] vc-sm: Videocore shared memory driver
[ 2.780250] [vc_sm_connected_init]: start
[ 2.789953] [vc_sm_connected_init]: end - returning 0
[ 2.801464] Waiting for root device /dev/mmcblk0p2...
[ 2.816384] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.831579] mmc0: new high speed SDHC card at address 59b4
[ 2.842695] mmcblk0: mmc0:59b4 00000 14.9 GiB
[ 2.853634] mmcblk0: p1 p2
[ 2.888638] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.900218] Indeed it is in host mode hprt0 = 00001101
[ 2.938410] EXT4-fs (mmcblk0p2): recovery complete
[ 2.948216] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.961305] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.996888] devtmpfs: mounted
[ 3.005670] Freeing unused kernel memory: 404K (80799000 - 807fe000)
[ 3.098937] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.111533] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.124805] hub 1-1:1.0: USB hub found
[ 3.133943] hub 1-1:1.0: 5 ports detected
[ 3.175497] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
[ 3.175497]
[ 3.194839] CPU: 1 PID: 1 Comm: systemd Not tainted 3.18.5 #1
[ 3.205777] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.218767] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.231240] [<805428b4>] (dump_stack) from [<80541c94>] (panic+0xb0/0x230)
[ 3.243359] [<80541c94>] (panic) from [<80029ab4>] (complete_and_exit+0x0/0x2c)
[ 3.255911] [<80029ab4>] (complete_and_exit) from [<80029b5c>] (do_group_exit+0x5c/0xc8)
[ 3.269281] [<80029b5c>] (do_group_exit) from [<80029be8>] (__wake_up_parent+0x0/0x30)
[ 3.282539] [<80029be8>] (__wake_up_parent) from [<8000ee00>] (ret_fast_syscall+0x0/0x48)
[ 3.296065] CPU0: stopping
[ 3.304037] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.5 #1
[ 3.315265] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.328384] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.341010] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.353818] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.366142] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.378479] Exception stack(0x807fff00 to 0x807fff48)
[ 3.389020] ff00: ffffffed 00000000 ffffffed 00000000 807fe000 00000000 8081cdd4 00000000
[ 3.402792] ff20: 00000000 8081cd70 808578bc 807fff54 8081dccc 807fff48 800101b8 800101bc
[ 3.416593] ff40: 60000113 ffffffff
[ 3.425686] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.438761] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.452747] [<8005f168>] (cpu_startup_entry) from [<80540a38>] (rest_init+0x94/0x98)
[ 3.466227] [<80540a38>] (rest_init) from [<80799d1c>] (start_kernel+0x3d0/0x3dc)
[ 3.479445] CPU3: stopping
[ 3.487860] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.18.5 #1
[ 3.499546] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.513113] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.526166] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.539378] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.552063] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.564740] Exception stack(0xb98c9f48 to 0xb98c9f90)
[ 3.575625] 9f40: ffffffed 00000000 ffffffed 00000000 b98c8000 00000000
[ 3.589723] 9f60: 8081cdd4 00000000 00000000 8081cd70 808578bc b98c9f9c 8081dccc b98c9f90
[ 3.603858] 9f80: 800101b8 800101bc 60000113 ffffffff
[ 3.614880] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.628325] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.642697] [<8005f168>] (cpu_startup_entry) from [<8001555c>] (secondary_start_kernel+0x144/0x150)
[ 3.657913] [<8001555c>] (secondary_start_kernel) from [<000086a4>] (0x86a4)
[ 3.671146] CPU2: stopping
[ 3.680016] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.18.5 #1
[ 3.692188] [<800182d4>] (unwind_backtrace) from [<80013558>] (show_stack+0x20/0x24)
[ 3.706247] [<80013558>] (show_stack) from [<805428b4>] (dump_stack+0x9c/0xd4)
[ 3.719762] [<805428b4>] (dump_stack) from [<80015a24>] (handle_IPI+0x26c/0x280)
[ 3.733420] [<80015a24>] (handle_IPI) from [<80008600>] (do_IPI+0x18/0x1c)
[ 3.746563] [<80008600>] (do_IPI) from [<805480f4>] (__irq_svc+0x34/0x14c)
[ 3.759706] Exception stack(0xb98c7f48 to 0xb98c7f90)
[ 3.771010] 7f40: ffffffed 00000000 ffffffed 00000000 b98c6000 00000000
[ 3.785509] 7f60: 8081cdd4 00000000 00000000 8081cd70 808578bc b98c7f9c 8081dccc b98c7f90
[ 3.800044] 7f80: 800101b8 800101bc 60000113 ffffffff
[ 3.811433] [<805480f4>] (__irq_svc) from [<800101bc>] (arch_cpu_idle+0x34/0x4c)
[ 3.825193] [<800101bc>] (arch_cpu_idle) from [<8005f168>] (cpu_startup_entry+0x318/0x3c0)
[ 3.839855] [<8005f168>] (cpu_startup_entry) from [<8001555c>] (secondary_start_kernel+0x144/0x150)
[ 3.855329] [<8001555c>] (secondary_start_kernel) from [<000086a4>] (0x86a4)
PANIC: Attempted to kill init! exitcode=0x00007f00
Entering kdb (current=0xb9890000, pid 1) on processor 1 due to Keyboard Entry
[1]kdb>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment