Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
Boot Log of Tizen:Common on Radxa Rock with Rockchip RK3188
DR Version 1.04 20130517
In
DDR3
300MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB
Memory OK
OUT
BUILD=====5
SdmmcInit=0 0
FwPartOffset=2000 , 0
run on sd0
OK! 14303
unsigned!
SecureBootEn = 0 0
Boot ver: 0000-00-00#0.00
start_linux=====26912
371030 Starting kernel...@0x60408000
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.36+ (root@PLATINUMONE) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sat Feb 15 20:54:36 EST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: RK30board
[ 0.000000] memory reserve: Memory(base:0x8f000000 size:120M) reserved for <ion>
[ 0.000000] memory reserve: Memory(base:0x8d800000 size:24M) reserved for <fb0 buf>
[ 0.000000] memory reserve: Memory(base:0x8d000000 size:8M) reserved for <camera_ipp_mem>
[ 0.000000] memory reserve: Total reserved 152M
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] CPU SRAM: copied sram code from c0ba4000 to fef00100 - fef02258
[ 0.000000] CPU SRAM: copied sram data from c0ba6158 to fef02258 - fef029dc
[ 0.000000] sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q
[ 0.000000] CLKDATA_MSG: pll_flag = 0x00
[ 0.000000] L310 cache controller enabled
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
[ 0.000000] DDR DEBUG: version 1.00 20130712
[ 0.000000] DDR DEBUG: fix 2cs bug
[ 0.000000] DDR DEBUG: DDR3 Device
[ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Total Capability=2048MB
[ 0.000000] DDR DEBUG: init success!!! freq=300MHz
[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90
[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90
[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90
[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x1b, DGSL=1 extra clock, DGPS=90
[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c31af000 s6976 r8192 d13504 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 481280
[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x001A0000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00008000@0x00004000(kernel),0x00008000@0x0000c000(boot) bootver=0000-00-00#0.00 firmware_ver=4.4.2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 720MB 1176MB = 1896MB total
[ 0.000000] Memory: 1903680k/1903680k available, 193472k reserved, 1204224K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
[ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0408000 - 0xc0431000 ( 164 kB)
[ 0.000000] .text : 0xc0431000 - 0xc0b322a4 (7173 kB)
[ 0.000000] .data : 0xc0b34000 - 0xc0ba3e28 ( 448 kB)
[ 0.000000] .bss : 0xc0ba7024 - 0xc165ac10 (10959 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:352
[ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] rk_timer: version 1.2
[ 0.000000] Console: colour dummy device 80x30
[ 0.008771] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
[ 0.017940] pid_max: default: 32768 minimum: 301
[ 0.023314] Mount-cache hash table entries: 512
[ 0.028959] Initializing cgroup subsys debug
[ 0.033741] Initializing cgroup subsys cpuacct
[ 0.038742] Initializing cgroup subsys freezer
[ 0.043728] CPU: Testing write buffer coherency: ok
[ 0.129982] CPU1: Booted secondary processor
[ 0.169975] CPU2: Booted secondary processor
[ 0.209977] CPU3: Booted secondary processor
[ 0.210009] Brought up 4 CPUs
[ 0.227674] SMP: Total of 4 processors activated (6525.87 BogoMIPS).
[ 0.235112] devtmpfs: initialized
[ 0.245178] NET: Registered protocol family 16
[ 0.250255] last_log: 0xec900000 map to 0xf7004000 and copy to 0xc0bab1a0 (version 2.1)
[ 0.273802] DVFS MSG: AVS Value(index=0): 205 204 204 204 204 203 205 205 201 205
[ 0.293082] warning:lcdc0 not add to system!
[ 0.297882] lcdc1 is used as primary display device controller!
[ 0.304684] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 0.311796] ********************rksdmmc1_gpio_init-------off************nition
[ 0.419917] rk29sdk_wifi_bt_gpio_control_init: init finished
<hit enter to activate fiq debugger>
[ 0.427450] console [ttyFIQ0] enabled, bootconsole disabled
[ 0.427450] console [ttyFIQ0] enabled, bootconsole disabled
[ 0.436620] Registered FIQ tty driver ec83ecc0
[ 0.451110] bio: create slab <bio-0> at 0
[ 0.455544] SCSI subsystem initialized
[ 0.455775] usbcore: registered new interface driver usbfs
[ 0.455892] usbcore: registered new interface driver hub
[ 0.470118] usbcore: registered new device driver usb
[ 0.470465] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
[ 0.470670] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
[ 0.470871] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
[ 0.491128] rk30-adc rk30-adc: rk30 adc: driver initialized
[ 0.491407] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.491859] Bluetooth: Core ver 2.16
[ 0.491928] NET: Registered protocol family 31
[ 0.491963] Bluetooth: HCI device and connection manager initialized
[ 0.492011] Bluetooth: HCI socket layer initialized
[ 0.492048] Bluetooth: L2CAP socket layer initialized
[ 0.492097] Bluetooth: SCO socket layer initialized
[ 0.493169] rk fb probe ok!
[ 0.498012] act8846_set_init,line=17
[ 0.498044] act8846_set_init:g_pmic_type=3
[ 0.499810] act8846_set_init act_dcdc1 =1200000mV end
[ 0.501655] act8846_set_init vdd_core =1000000mV end
[ 0.503495] act8846_set_init vdd_cpu =1000000mV end
[ 0.505333] act8846_set_init act_dcdc4 =3300000mV end
[ 0.506553] act8846_set_init act_ldo1 =1000000mV end
[ 0.508291] act8846_set_init act_ldo2 =1200000mV end
[ 0.510032] act8846_set_init act_ldo3 =1800000mV end
[ 0.511773] act8846_set_init act_ldo4 =3300000mV end
[ 0.513510] act8846_set_init act_ldo5 =3300000mV end
[ 0.515249] act8846_set_init act_ldo6 =1800000mV end
[ 0.516366] act8846_set_init act_ldo7 =1800000mV end
[ 0.518103] act8846_set_init act_ldo8 =2800000mV end
[ 0.518150] act8846_set_init,line=78 END
[ 0.518409] act8846 0xe4 = 0******************nition-1
[ 0.518844] act8846 0xe4 = 143******************nition-2
[ 0.518919] i2c-core: driver [act8846] using legacy suspend method
[ 0.518963] i2c-core: driver [act8846] using legacy resume method
[ 0.519036] Switching to clocksource rk_timer
[ 0.519346] Switched to NOHz mode on CPU #0
[ 0.520016] Switched to NOHz mode on CPU #3
[ 0.520030] Switched to NOHz mode on CPU #1
[ 0.520043] Switched to NOHz mode on CPU #2
[ 0.526239] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf70a0000
[ 0.526327] fb0:win0
[ 0.526333] fb1:win1
[ 0.526338] fb2:win2
[ 0.526474] rk3188 lcdc1 clk enable...
[ 0.526560] rk3188 lcdc1 clk disable...
[ 0.585758] fb0:phy:8d800000>>vir:f8000000>>len:0x1800000
[ 0.586020] rk_fb_register>>>>>fb0
[ 0.586341] rk_fb_register>>>>>fb1
[ 0.586374] rk3188 lcdc1 probe ok!
[ 0.648787] IT66121 probe success.
[ 0.655456] NET: Registered protocol family 2
[ 0.655625] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.656023] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.657897] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.658990] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.659038] TCP reno registered
[ 0.659068] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.659170] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.659548] NET: Registered protocol family 1
[ 0.659824] RPC: Registered named UNIX socket transport module.
[ 0.659869] RPC: Registered udp transport module.
[ 0.659904] RPC: Registered tcp transport module.
[ 0.659938] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.660142] RK29 Backlight Driver Initialized.
[ 0.660375] Unpacking initramfs...
[ 0.745726] Freeing initrd memory: 1664K
[ 0.745821] PMU: registered new PMU device of type 0
[ 0.745938] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 6
[ 0.745989] adjust table freq=1608000 KHz, index=1350000 mV to index=1250000 mV
[ 0.746045] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 6
[ 0.747198] rk3188 cpufreq version 2.1, suspend freq 816 MHz
[ 0.748364] Loaded driver for PL330 DMAC-1 rk29-pl330
[ 0.748394] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.748548] Loaded driver for PL330 DMAC-2 rk29-pl330
[ 0.748576] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
[ 0.749153] highmem bounce pool size: 64 pages
[ 0.749275] ashmem: initialized
[ 0.752744] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.752781] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.753429] fuse init (API version 7.16)
[ 0.753634] msgmni has been set to 1369
[ 0.754321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.754363] io scheduler noop registered
[ 0.754384] io scheduler deadline registered
[ 0.754441] io scheduler cfq registered (default)
[ 0.759234] rga: Driver loaded succesfully
[ 0.759455] rk_serial.c v1.3 2012-12-14
[ 0.759527] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
[ 0.819109] rk_serial rk_serial.0: membase 0xf70b8000
[ 0.819172] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
[ 0.849108] rk_serial rk_serial.3: membase 0xf70c0000
[ 0.849311] Rockchip ion module(version: 1.0) is successfully loaded
[ 0.850930] loop: module loaded
[ 0.850974] Android kernel panic handler initialized (bind=kpanic)
[ 0.851520] PPP generic driver version 2.4.2
[ 0.851670] PPP Deflate Compression module registered
[ 0.851699] PPP BSD Compression module registered
[ 0.852123] PPP MPPE Compression module registered
[ 0.852155] NET: Registered protocol family 24
[ 0.852182] tun: Universal TUN/TAP device driver, 1.6
[ 0.852213] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.852402] usbcore: registered new interface driver r8152
[ 0.852461] usbcore: registered new interface driver asix
[ 0.852519] usbcore: registered new interface driver cdc_ether
[ 0.852597] usbcore: registered new interface driver dm9620
[ 0.852648] usbcore: registered new interface driver SR9700_android
[ 0.852699] usbcore: registered new interface driver net1080
[ 0.852747] usbcore: registered new interface driver zaurus
[ 0.852785] Rockchip WiFi SYS interface (V1.00) ...
[ 0.852832] Initializing USB Mass Storage driver...
[ 0.852905] usbcore: registered new interface driver usb-storage
[ 0.852936] USB Mass Storage support registered.
[ 0.853023] usbcore: registered new interface driver usbserial
[ 0.853072] USB Serial support registered for generic
[ 0.853121] usbcore: registered new interface driver usbserial_generic
[ 0.853155] usbserial: USB Serial Driver core
[ 0.853226] USB Serial support registered for GSM modem (1-port)
[ 0.853283] usbcore: registered new interface driver option
[ 0.853312] option: v0.7.2:USB Driver for GSM modems
[ 0.894995] ******** Show Sink Info ********
[ 0.895020] Support video mode:
[ 0.895038] 1920x1080p@60Hz.
[ 0.895055] 1920x1080p@50Hz.
[ 0.895071] 1920x1080p@30Hz.
[ 0.895087] 1920x1080p@25Hz.
[ 0.895103] 1920x1080p@24Hz.
[ 0.895119] 1280x720p@60Hz.
[ 0.895135] 1280x720p@50Hz.
[ 0.895150] 720x576p@50Hz.
[ 0.895165] 720x480p@60Hz.
[ 0.895181] Support audio type: LPCM
[ 0.895200] Support audio sample rate:
[ 0.895220] 32000
[ 0.895231] 44100
[ 0.895243] 48000
[ 0.895255] Support audio word lenght:
[ 0.895275] 16bit
[ 0.895286] 20bit
[ 0.895297] 24bit
[ 0.895309] ******** Show Sink Info ********
[ 0.895398] rk3188 lcdc1 clk enable...
[ 0.895427] lcdc1: dclk:148500000>>fps:60
[ 0.895452] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
[ 0.895488] lcdc1: dclk:148500000>>fps:60
[ 0.895510] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
[ 0.895544] lcdc1 wakeup from standby!
[ 0.895565] lcdc1 win0 open,atv layer:1
[ 1.078460] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[ 1.078493] usb20_otg usb20_otg: DWC OTG Controller
[ 1.078590] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
[ 1.078649] usb20_otg usb20_otg: irq 48, io mem 0x00000000
[ 1.078701] DWC_OTG: Init: Port Power? op_state=1
[ 1.078726] DWC_OTG: Init: Power Port (0)
[ 1.078792] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.078829] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.078867] usb usb1: Product: DWC OTG Controller
[ 1.078893] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
[ 1.078923] usb usb1: SerialNumber: usb20_otg
[ 1.079221] hub1***************************nition
[ 1.079248] hub 1-0:1.0: USB hub found
[ 1.079277] hub 1-0:1.0: 1 port detected
[ 1.081832] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
[ 1.145464] cfg80211: Calling CRDA to update world regulatory domain
[ 1.292362] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[ 1.292407] usb20_host usb20_host: DWC OTG Controller
[ 1.292456] usb20_host usb20_host: new USB bus registered, assigned bus number 2
[ 1.292510] usb20_host usb20_host: irq 49, io mem 0x00000000
[ 1.292578] DWC_OTG: Init: Port Power? op_state=1
[ 1.292605] DWC_OTG: Init: Power Port (0)
[ 1.292655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.292693] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.292732] usb usb2: Product: DWC OTG Controller
[ 1.292758] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
[ 1.292791] usb usb2: SerialNumber: usb20_host
[ 1.293036] hub1***************************nition
[ 1.293063] hub 2-0:1.0: USB hub found
[ 1.293091] hub 2-0:1.0: 1 port detected
[ 1.293419] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
[ 1.371275] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 1.371317] android_usb gadget: Number of LUNs=2
[ 1.371353] lun0: LUN: removable file: (no medium)
[ 1.371380] lun1: LUN: removable file: (no medium)
[ 1.371546] android_usb gadget: android_usb ready
[ 1.371709] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
[ 1.371919] usbcore: registered new interface driver xpad
[ 1.371981] usbcore: registered new interface driver usb_acecad
[ 1.372012] acecad: v3.2:USB Acecad Flair tablet driver
[ 1.372062] usbcore: registered new interface driver aiptek
[ 1.372096] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
[ 1.372137] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
[ 1.372196] usbcore: registered new interface driver gtco
[ 1.372227] GTCO usb driver version: 2.00.0006
[ 1.372273] usbcore: registered new interface driver hanwang
[ 1.372324] usbcore: registered new interface driver kbtab
[ 1.372356] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[ 1.372420] usbcore: registered new interface driver wacom
[ 1.372451] wacom: v1.52:USB Wacom tablet driver
[ 1.372581] ++++++++remotectl_init
[ 1.372618] ++++++++remotectl_probe
[ 1.372663] remotectl probe j=0x0
[ 1.372683] remotectl probe j=0x1
[ 1.372704] remotectl probe j=0x2
[ 1.372724] remotectl probe j=0x3
[ 1.372743] remotectl probe j=0x4
[ 1.372761] remotectl probe j=0x5
[ 1.372873] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
[ 1.379877] using rtc device, rtc_hym8563, for alarms
[ 1.379928] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
[ 1.379989] i2c /dev entries driver
[ 1.380314] lirc_dev: IR Remote Control driver registered, major 250
[ 1.380350] IR NEC protocol handler initialized
[ 1.380375] IR RC5(x) protocol handler initialized
[ 1.380403] IR RC6 protocol handler initialized
[ 1.380428] IR JVC protocol handler initialized
[ 1.380453] IR Sony protocol handler initialized
[ 1.380478] IR RC5 (streamzap) protocol handler initialized
[ 1.380507] IR LIRC bridge handler initialized
[ 1.380535] Linux video capture interface: v2.00
[ 1.380710] usbcore: registered new interface driver uvcvideo
[ 1.380742] USB Video Class driver (v1.1.0)
[ 1.380789] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
[ 1.380818] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[ 1.380971] rk29-wdt rk29-wdt.0: starting watchdog timer
[ 1.381314] device-mapper: uevent: version 1.0.3
[ 1.381508] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.381629] Bluetooth: HCI UART driver ver 2.2
[ 1.381657] Bluetooth: HCI H4 protocol initialized
[ 1.381685] Bluetooth: HCILL protocol initialized
[ 1.381837] cpuidle: using governor ladder
[ 1.381867] cpuidle: using governor menu
[ 1.397180] ********rk29_sdmmc_gpio_open device_id=0**********nition
[ 1.427275]
[ 1.427278] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
[ 1.432354] rk29_sdmmc_change_clk_div..1961.. newDiv=40, newCLK=300Khz [sd_mmc]
[ 1.432432] .Line3966..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08. [sd_mmc]
[ 1.432628] .Line3966..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08. [sdio]
[ 1.433779] usbcore: registered new interface driver usbhid
[ 1.433815] usbhid: USB HID core driver
[ 1.473396]
[ 1.473399] mmc_attach_sd..1219.. ===== Begin to identify card as SD-card. [mmc0]
[ 1.489344] logger: created 256K log 'log_main'
[ 1.489417] logger: created 256K log 'log_events'
[ 1.489486] logger: created 256K log 'log_radio'
[ 1.489594] logger: created 256K log 'log_system'
[ 1.489942] enter rt5616_modinit
[ 1.489979] enter rt5616_i2c_probe
[ 1.530465] enter rt5616_probe
[ 1.530894] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.531342] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.531803] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.532249] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.532690] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.533131] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.540683] rk29_sdmmc_change_clk_div..1961.. newDiv=0, newCLK=24000Khz [sd_mmc]
[ 1.540772] mmc0: new high speed SDHC card at address 0001
[ 1.549506] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.549948] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.550392] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.550833] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.551277] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.551718] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.552164] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.552606] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.553050] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.553492] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.553936] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.554377] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.554822] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.555261] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.555705] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.556147] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.556591] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.557031] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.557476] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.557915] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.558359] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.558800] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.559245] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.559686] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.560133] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.560573] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.561015] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.561456] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.561899] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.562340] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.562781] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.563220] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.563663] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.564104] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnorkairp can-tn, rate di.e.
[y '/de5'4 Fil 2c itc
4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.564988] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.565431] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.565871] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.566314] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.566756] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.567198] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.567639] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.568082] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.568522] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.568964] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.569407] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.569850] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.570291] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.570734] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.571173] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.571615] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.572057] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.572498] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.572937] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.573378] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.573819] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.574259] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.574700] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 2...
[ 1.575141] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 1...
[ 1.575582] i2c i2c-4: No ack, Maybe slave(addr: 0x1b) not exist or abnormal power-on, retry 0...
[ 1.575832] rt5616 4-001b: Failed to add route Mic Jack->Mic Bias1
[ 1.575868] rt5616 4-001b: dapm: unknown pin HP_L
[ 1.575896] rt5616 4-001b: dapm: unknown pin HP_R
[ 1.581292] asoc: rt5616-aif1 <-> rk29_i2s.1 mapping ok
[ 1.581645] ALSA device list:
[ 1.581665] #0: RK29_RT5616
[ 1.581776] GACT probability NOT on
[ 1.581802] Mirror/redirect action on
[ 1.581826] u32 classifier
[ 1.581841] Actions configured
[ 1.581863] Netfilter messages via NETLINK v0.30.
[ 1.581924] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.582238] ctnetlink v0.93: registering with nfnetlink.
[ 1.582294] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.582334] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.582596] xt_time: kernel timezone is -0000
[ 1.582741] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.582880] arp_tables: (C) 2002 David S. Miller
[ 1.582938] TCP cubic registered
[ 1.582957] Initializing XFRM netlink socket
[ 1.583333] NET: Registered protocol family 10
[ 1.583894] Mobile IPv6
[ 1.583929] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.584045] IPv6 over IPv4 tunneling driver
[ 1.584614] NET: Registered protocol family 17
[ 1.584660] NET: Registered protocol family 15
[ 1.584861] mmcblk0: mmc0:0001 00000 14.6 GiB
[ 1.585240] Bluetooth: RFCOMM TTY layer initialized
[ 1.585282] Bluetooth: RFCOMM socket layer initialized
[ 1.585312] Bluetooth: RFCOMM ver 1.11
[ 1.585377] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.585410] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.585566] NET: Registered protocol family 35
[ 1.585669] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.585729] [BT_RFKILL]: Enter rfkill_rk_probe
[ 1.585780] [BT_RFKILL]: init gpio
[ 1.585807] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.585847] [BT_RFKILL]: ** disable irq
[ 1.585872] [BT_RFKILL]: setup rfkill
[ 1.585962] [BT_RFKILL]: Enter rfkill_rk_set_power
[ 1.585988] [BT_RFKILL]: Set blocked:1
[ 1.586113] [BT_RFKILL]: bt shut off power
[ 1.586226]
[ 1.586231] msdos_partition..461... ==== Begin to parse sdcard-partition. [mmc0]
[ 1.586294] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
[ 1.586328] msdos_partition..543... ==== partition-1, size=2007039KB [mmc0]
[ 1.586366] msdos_partition..571... ==== main partition-1....[mmc0]
[ 1.586403] mmcblk0: p1
[ 1.586684] mmc_rescan_try_freq..1718.. ===== Initialize SD-card successfully. [mmc0]
[ 1.586737]
[ 1.586740] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 1.599130] rk29_sdmmc_change_clk_div..1961.. newDiv=40, newCLK=300Khz [sdio]
[ 1.609123] [BT_RFKILL]: ap6330 device registered.
[ 1.609196] Registering the dns_resolver key type
[ 1.619139] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 1.619203] Registering SWP/SWPB emulation handler
[ 1.619604] rk3066b-camera version: v0.2.31 Zoom by ipp
[ 1.619667] rk_cam_io: rk_sensor_io_init..ov5640_back..flash pin(189) init failed
[ 1.621842] ddrfreq: verion 2.4 20130427
[ 1.621903] ddrfreq: normal 396MHz video 300MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 300MHz
[ 1.621927] camera 33-0-ov5640_back: Cannot get I2C adapter #3. No driver?
[ 1.621952] camera 33-0-ov5640_back: Probe ov5640_back failed
[ 1.622015] camera 33-1-ov2659_front: Cannot get I2C adapter #3. No driver?
[ 1.622034] camera 33-1-ov2659_front: Probe ov2659_front failed
[ 1.622974] ddrfreq: change freq to 396 MHz when normal
[ 1.624309] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:02:41 UTC (1293883361)
[ 1.624353] i2c_check_rk610_ex: adap(0) is not exist
[ 1.627059] asoc: dit-hifi <-> rk-spdif.0 mapping ok
[ 1.627441] usbcore: registered new interface driver snd-usb-audio
[ 1.627548] Freeing init memory: 164K
[ 1.679120] usb 2-1: new high speed USB device number 2 using usb20_host
[ 1.890352] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
[ 1.890386] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.890420] usb 2-1: Product: USB2.0 Hub
[ 1.890846] hub1***************************nition
[ 1.890871] hub 2-1:1.0: USB hub found
[ 1.891212] hub 2-1:1.0: 4 ports detected
[ 2.133699] =======================================================
[ 2.133733] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 2.133763] =======================================================
[ 2.133792] RKWIFI WiFi driver (Powered by Rockchip,Ver 4.62.WFD.OOB) init.
[ 2.169420] usb 2-1.1: new high speed USB device number 3 using usb20_host
[ 2.235636] =========== WLAN placed in POWER ON ========
[ 2.235698] ANDROID-ERROR) wifi_set_power = 1
[ 2.235723] rk29sdk_wifi_power: 1
[ 2.235743] ****rk29sdk_wifi_power power up *********----------nition
[ 2.270000] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0179
[ 2.270035] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.270069] usb 2-1.1: Product: 802.11n NIC
[ 2.270089] usb 2-1.1: Manufacturer: Realtek
[ 2.270111] usb 2-1.1: SerialNumber: 00830E02C31D
[ 2.286921] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 2.286952] ********************rksdmmc1_gpio_init------on************nition
[ 2.349415] usb 2-1.3: new high speed USB device number 4 using usb20_host
[ 2.450742] usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0608
[ 2.450777] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.450812] usb 2-1.3: Product: USB2.0 Hub
[ 2.451343] hub1***************************nition
[ 2.451366] hub 2-1.3:1.0: USB hub found
[ 2.451731] hub 2-1.3:1.0: 4 ports detected
[ 2.490696] wifi turn on power
[ 2.490714] ANDROID-ERROR) wifi_set_carddetect = 1
[ 2.490739] rk29sdk_wifi_set_carddetect:1
[ 2.490760] mmc1: slot status change detected(0-1)
[ 2.490783] rk29_sdmmc_set_iomux_mmc1************************nition
[ 2.689117]
[ 2.689120] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 2.730447] usb 2-1.3.1: new low speed USB device number 5 using usb20_host
[ 2.734821] rk29_sdmmc_command_complete..2947...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 2.735297] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 2.735773] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 2.736250] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 2.736727] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 2.737204] rk29_sdmmc_command_complete..2947...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 2.833393] usb 2-1.3.1: New USB device found, idVendor=046d, idProduct=c058
[ 2.833428] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.833462] usb 2-1.3.1: Product: USB Optical Mouse
[ 2.833485] usb 2-1.3.1: Manufacturer: Logitech
[ 2.836725] input: Logitech USB Optical Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/input/input2
[ 2.836927] generic-usb 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-usb20_host-1.3.1/input0
[ 2.909446] usb 2-1.3.4: new low speed USB device number 6 using usb20_host
[ 3.017885] usb 2-1.3.4: New USB device found, idVendor=0e6a, idProduct=6001
[ 3.017923] usb 2-1.3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.017966] usb 2-1.3.4: Product: HID Keyboard Device
[ 3.027682] input: HID Keyboard Device as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3.4/2-1.3.4:1.0/input/input3
[ 3.028059] generic-usb 0003:0E6A:6001.0002: input,hidraw1: USB HID v1.10 Keyboard [HID Keyboard Device] on usb-usb20_host-1.3.4/input0
[ 3.036078] input: HID Keyboard Device as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3.4/2-1.3.4:1.1/input/input4
[ 3.036284] generic-usb 0003:0E6A:6001.0003: input,hidraw2: USB HID v1.10 Device [HID Keyboard Device] on usb-usb20_host-1.3.4/input1
[ 4.489129]
[ 4.489132] failed to power up wifi chip, retry again (4 left) **
[ 4.489138]
[ 4.489222] ANDROID-ERROR) ## wifi_remove
[ 4.489243] ANDROID-ERROR) wifi_set_power = 0
[ 4.489267] rk29sdk_wifi_power: 0
[ 4.489286] ****rk29sdk_wifi_power power down *********----------nition
[ 4.489319] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 4.489349] ********************rksdmmc1_gpio_init-------off************nition
[ 4.693220] wifi shut off power
[ 4.693238] ANDROID-ERROR) wifi_set_carddetect = 0
[ 4.693272] rk29sdk_wifi_set_carddetect:0
[ 4.693293] mmc1: slot status change detected(1-0)
[ 4.693332]
[ 4.693335] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 4.693363] =========== WLAN placed in POWER OFF ========
[ 4.795321] =========== WLAN placed in POWER ON ========
[ 4.795373] ANDROID-ERROR) wifi_set_power = 1
[ 4.795395] rk29sdk_wifi_power: 1
[ 4.795413] ****rk29sdk_wifi_power power up *********----------nition
[ 4.846450] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 4.846481] ********************rksdmmc1_gpio_init------on************nition
[ 5.050351] wifi turn on power
[ 5.050369] ANDROID-ERROR) wifi_set_carddetect = 1
[ 5.050401] rk29sdk_wifi_set_carddetect:1
[ 5.050421] mmc1: slot status change detected(0-1)
[ 5.050445] rk29_sdmmc_set_iomux_mmc1************************nition
[ 5.249111]
[ 5.249114] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 5.294312] rk29_sdmmc_command_complete..2947...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 5.294791] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 5.295268] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 5.295745] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 5.296218] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 5.296694] rk29_sdmmc_command_complete..2947...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 7.049121]
[ 7.049124] failed to power up wifi chip, retry again (3 left) **
[ 7.049130]
[ 7.049202] ANDROID-ERROR) ## wifi_remove
[ 7.049223] ANDROID-ERROR) wifi_set_power = 0
[ 7.049246] rk29sdk_wifi_power: 0
[ 7.049263] ****rk29sdk_wifi_power power down *********----------nition
[ 7.049295] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 7.049324] ********************rksdmmc1_gpio_init-------off************nition
[ 7.253190] wifi shut off power
[ 7.253209] ANDROID-ERROR) wifi_set_carddetect = 0
[ 7.253241] rk29sdk_wifi_set_carddetect:0
[ 7.253261] mmc1: slot status change detected(1-0)
[ 7.253296]
[ 7.253299] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 7.253313] =========== WLAN placed in POWER OFF ========
[ 7.355280] =========== WLAN placed in POWER ON ========
[ 7.355322] ANDROID-ERROR) wifi_set_power = 1
[ 7.355347] rk29sdk_wifi_power: 1
[ 7.355365] ****rk29sdk_wifi_power power up *********----------nition
[ 7.406394] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 7.406425] ********************rksdmmc1_gpio_init------on************nition
[ 7.610295] wifi turn on power
[ 7.610312] ANDROID-ERROR) wifi_set_carddetect = 1
[ 7.610344] rk29sdk_wifi_set_carddetect:1
[ 7.610365] mmc1: slot status change detected(0-1)
[ 7.610387] rk29_sdmmc_set_iomux_mmc1************************nition
[ 7.809114]
[ 7.809116] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 7.854286] rk29_sdmmc_command_complete..2947...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 7.854760] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 7.855233] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 7.855706] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 7.856179] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 7.856654] rk29_sdmmc_command_complete..2947...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 9.609116]
[ 9.609119] failed to power up wifi chip, retry again (2 left) **
[ 9.609126]
[ 9.609195] ANDROID-ERROR) ## wifi_remove
[ 9.609215] ANDROID-ERROR) wifi_set_power = 0
[ 9.609237] rk29sdk_wifi_power: 0
[ 9.609256] ****rk29sdk_wifi_power power down *********----------nition
[ 9.609287] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 9.609317] ********************rksdmmc1_gpio_init-------off************nition
[ 9.813507] wifi shut off power
[ 9.813525] ANDROID-ERROR) wifi_set_carddetect = 0
[ 9.813558] rk29sdk_wifi_set_carddetect:0
[ 9.813580] mmc1: slot status change detected(1-0)
[ 9.813612]
[ 9.813614] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 9.813685] =========== WLAN placed in POWER OFF ========
[ 9.918889] =========== WLAN placed in POWER ON ========
[ 9.918931] ANDROID-ERROR) wifi_set_power = 1
[ 9.918956] rk29sdk_wifi_power: 1
[ 9.918975] ****rk29sdk_wifi_power power up *********----------nition
[ 9.970070] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 9.970101] ********************rksdmmc1_gpio_init------on************nition
[ 10.174272] wifi turn on power
[ 10.174289] ANDROID-ERROR) wifi_set_carddetect = 1
[ 10.174323] rk29sdk_wifi_set_carddetect:1
[ 10.174343] mmc1: slot status change detected(0-1)
[ 10.174366] rk29_sdmmc_set_iomux_mmc1************************nition
[ 10.369109]
[ 10.369111] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 10.414315] rk29_sdmmc_command_complete..2947...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 10.414796] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 10.415272] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 10.415749] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 10.416222] rk29_sdmmc_command_complete..2947...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 10.416699] rk29_sdmmc_command_complete..2947...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]
[ 12.169106]
[ 12.169109] failed to power up wifi chip, retry again (1 left) **
[ 12.169115]
[ 12.169213] ANDROID-ERROR) ## wifi_remove
[ 12.169234] ANDROID-ERROR) wifi_set_power = 0
[ 12.169257] rk29sdk_wifi_power: 0
[ 12.169276] ****rk29sdk_wifi_power power down *********----------nition
[ 12.169306] ********rk29_sdmmc_gpio_open device_id=1**********nition
[ 12.169336] ********************rksdmmc1_gpio_init-------off************nition
[ 12.373495] wifi shut off power
[ 12.373513] ANDROID-ERROR) wifi_set_carddetect = 0
[ 12.373545] rk29sdk_wifi_set_carddetect:0
[ 12.373566] mmc1: slot status change detected(1-0)
[ 12.373598]
[ 12.373601] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 12.373669] =========== WLAN placed in POWER OFF ========
[ 12.373695]
[ 12.373698] failed to power up wifi chip, max retry reached, exits **
[ 12.373704]
insmod: can't insert '/lib/modules/rkwifi.ko': No such device
[ 12.465255] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[ 12.519780] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[ 12.884404] EXT4-fs (mmcblk0p1): recovery complete
[ 12.890275] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.314045] tmpfs: Bad mount option smackfsroot
[ 13.439373] tmpfs: Bad mount option smackfstransmute
[ 13.499191] tmpfs: Bad mount option smackfsroot
[ 13.979175] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA -SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Welcome to Tizen 3.0.0 (Tizen Next)!
[ 14.019367] systemd[1]: Failed to insert module 'autofs4'
[ 14.024986] systemd[1]: No hostname configured.
[ 14.029549] systemd[1]: Set hostname to <localhost>.
[ 14.411865] systemd[1]: Cannot add dependency jo o nStartgpgoCollevt e, dgnorang: Un...
c-sdlevelinit.service failed to load: No such file or directory.
[ 14.412124] systemd[1]: Found ordering cycle on basic.target/start
[ 14.412162] systemd[1]: Found dependency on sockets.target/start
[ 14.412193] systemd[1]: Found dependency on system-server.service/start
[ 14.412228] systemd[1]: Found dependency on basic.target/start
[ 14.412258] systemd[1]: Breaking ordering cycle by deleting job sockets.target/start
[ 14.412297] systemd[1]: Job sockets.target/start deleted to break ordering cycle starting with basic.target/start
[ 14.412378] systemd[1]: Found ordering cycle on basic.target/start
[ 14.412411] systemd[1]: Found dependency on paths.target/start
[ 14.412441] systemd[1]: Found dependency on display-manager.path/start
[ 14.412475] systemd[1]: Found dependency on display-manager-run.service/start
[ 14.412510] systemd[1]: Found dependency on basic.target/start
[ 14.412540] systemd[1]: Breaking ordering cycle by deleting job paths.target/start
[ 14.412577] systemd[1]: Job paths.target/start deleted to break ordering cycle starting with basic.target/start
[ 14.413300] systemd[1]: Started Replay Read-Ahead Data.
[ 14.413389] systemd[1]: Starting Collect Read-Ahead Data...
[ 14.559506] systemd[1]: Starting Forwar Pa worxpecqunstsevicWadevDttyFIo0. Waice.
.
14.[5[929 systm1]:istenied Fnrward PdsswurdoRe Seckstto Wall i32m rK a[ch]
[s n4.g6on43desysnitct1]C Exaeibini yevime Pi-e.
FIQ0.device...
[2m 1OK5 4[5m] sistendng]:n toutinl Solayt. Shutdown ocket S
[ ting C699t5] isttof r1qu Led snitg od Dele eddehu.drrnnt cket.l...
14.570089] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 14.576429] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 14.576663] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 14.576977] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 14.577196] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 14.577291] systemd[1]: Starting Journal Socket.
[ 14.581636] systemd[1]: Listening on Journal Socket.
[ 14.582079] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 14.989392] systemd-readahead[87]: Failed to create fanotify object: Function not implemented
[ 15.139379] systemd[1]: Startin I tiaStzettng Initfasizrate..VConf storage...
[ 15.549448] systemd[1]: Mounting De g FMlentysg Deb.g
File System...
[ 16.149334] systemd[1]: Mounted PO I e aStaQtene Folr Sl temvice.
6.149622] systemd[1]: Starting Journal Service...
[ OK ] Started Journal Service.
[ 16.59068[][32mtemd[1:0m] LtestJoingaon edvi Kernel Socket.
[ OK ] Listening on udev Control Socket.
Starting udev Coldplug all Devices...
[ 17.229583] systemd-journald[91]: Vacuuming done, freed 0 bytes
[ OK ] Reached target Swap.
Mounting Temporary Directory...
[ OK ] Created slice Root Slice.
[ OK ] Created slice User and Session Slice.
[ 18.213520] tmpfs: No value for mount option '*'
[ OK ] Created slice System Slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-launchpad\x2dpreload.slice.
[ OK ] Created slice system-user\x2dsession\x2dlaunch.slice.
[ OK ] Reached target Slices.
[ OK ] Started Collect Read-Ahead Data.
[ OK ] Started Initialize the VConf storage.
[ OK ] Mounted Debug File System.
[FAILED] Failed to mount Temporary Directory.
See 'systemctl status tmp.mount' for details.
[DEPEND] Dependency failed for download-provider.socket.
[ OK ] Started Create list of required static device nodes ...current kernel.
[ OK ] Started udev Coldplug all Devices.
Starting Create static device nodes in /dev...
Mounting FUSE Control File System...
Starting Apply Kernel Variables...
Starting Setup Virtual Console...
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Create static device nodes in /dev.
[ OK ] Started Apply Kernel Variables.
[ 21.588673] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ OK ] Started Setup Virtual Console.
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Recreate Volatile Files and Directories...
Starting Trigger Flushing of Journal to Persistent Storage...
[ 23.289461] systemd-udevd[113]: starting version 208
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Recreate Volatile Files and Directories.
Starting Update UTMP about System Reboot/Shutdown...
[ 23.776269] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)
[ 23.813100] usbcore: registered new interface driver r8188eu
[ OK ] Reached target Sound Card.
[ 24.789516] systemd-journald[91]: Received request to flush runtime journal from PID 1
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Update UTMP about System Reboot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on security-server-password-reset.socket.
[ OK ] Listening on security-server-cookie-get.socket.
[ OK ] Listening on security-server-cookie-check.socket.
[ OK ] Listening on security-server-app-privilege-by-name.socket.
[ OK ] Listening on security-server-data-share.socket.
[ OK ] Listening on security-manager-installer.socket.
[ OK ] Listening on security-server-get-gid.socket.
[ OK ] Listening on security-server-password-check.socket.
[ OK ] Listening on security-server-privilege-by-pid.socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on sshd.socket.
[ OK ] Listening on security-server-password-set.socket.
[ OK ] Reached target security-server sockets.
[ OK ] Reached target Timers.
Starting Restore Sound Card State...
[ OK ] Reached target Basic System.
Starting Media server...
[ OK ] Started Media server.
Starting SMACK rules loading...
Starting net config service...
Starting Start the Alarm service...
[ OK ] Started Start the Alarm service.
Starting Weston display daemon...
[ OK ] Started Weston display daemon.
Starting Display manager setup service...
Starting Start the Access Control server...
[ 28.630255] no layer of lcdc1 is used,go to standby!
[ 28.630305] rk3188 lcdc1 clk disable...
[ 28.630330] lcdc1 win0 closed,atv layer:0
[ OK ] Started Start the Access Control server.
Starting Start the preload/preinit daemon...
[ OK ] Started Start the preload/preinit daemon.
Starting Login Service...
Starting Download provider service...
[ OK ] Started Download provider service.
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting Connection service...
Starting Start the security server...
Starting Start the system server service...
Starting Permit User Sessions...
[ OK ] Started net config service.
[ OK ] Started Start the security server.
[ OK ] Started Restore Sound Card State.
[FAILED] Failed to start SMACK rules loading.
See 'systemctl status smack-rules.service' for details.
[FAILED] Failed to start Display manager setup service.
See 'systemctl status display-manager.service' for details.
[FAILED] Failed to start Start the system server service.
See 'systemctl status system-server.service' for details.
[ OK ] Started Permit User Sessions.
[ OK ] Found device /dev/ttyFIQ0.
Starting Serial Getty on ttyFIQ0...
[ OK ] Started Serial Getty on ttyFIQ0.
[ OK ] Reached target Login Prompts.
Starting WPA supplicant...
[ OK ] Started Connection service.
[ OK ] Started Login Service.
[ OK ] Reached target Multi-User System.
Starting Procesess Monitor...
Starting User Session Launcher...
[ OK ] Started User Session Launcher.
Starting User Session Launcher...
[ 36.940476] set_pmon (190): /proc/159/oom_adj is deprecated, please use /proc/159/oom_score_adj instead.
[ OK ] Started User Session Launcher.
Starting User Session Launcher...
[ OK ] Started User Session Launcher.
Starting User Session Launcher...
[ OK ] Started User Session Launcher.
Starting User Session Launcher...
[ OK ] Started User Session Launcher.
[ OK ] Started WPA supplicant.
[ OK ] Created slice user-9999.slice.
[ OK ] Started Procesess Monitor.
[ OK ] Reached target Graphical Interface.

localhost login: root
Password:
Welcome to Tizen
root@localhost:~# uname -a
Linux localhost 3.0.36+ #1 SMP PREEMPT Sat Feb 15 20:54:36 EST 2014 armv7l GNU/Linux
root@localhost:~#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment