-
-
Save levifig/348e4f4484d2cba04149ac61aac8079b to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# smartctl -ax /dev/disk/by-id/ata-SSDSC2BB480G4I_00AJ471_00AJ474IBM_BTWL344503JM480QGN | |
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-16-pve] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Device Model: SSDSC2BB480G4I 00AJ471 00AJ474IBM | |
Serial Number: BTWL344503JM480QGN | |
LU WWN Device Id: 5 5cd2e4 04b515799 | |
Firmware Version: D201NB34 | |
User Capacity: 480,103,981,056 bytes [480 GB] | |
Sector Size: 512 bytes logical/physical | |
Rotation Rate: Solid State Device | |
Form Factor: 2.5 inches | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Mon Jul 1 02:18:15 2019 CDT | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Wt Cache Reorder: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 0) seconds. | |
Offline data collection | |
capabilities: (0x79) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 2) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 2) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 1 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-- 130 130 039 - 6544 | |
5 Reallocated_Sector_Ct PO--CK 097 097 001 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 9176 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 39 | |
13 Read_Soft_Error_Rate -OSRC- 130 100 000 - 6544 | |
100 Unknown_Attribute -O--CK 100 100 000 - 162898 | |
170 Unknown_Attribute PO--CK 100 100 010 - 5970 | |
171 Unknown_Attribute -O--CK 100 100 000 - 0 | |
172 Unknown_Attribute -O--CK 100 100 000 - 0 | |
173 Unknown_Attribute -O--CK 090 090 000 - 657150115840 | |
174 Unknown_Attribute -O--CK 100 100 000 - 25 | |
177 Wear_Leveling_Count -O--CK 001 001 --- - 657150115840 | |
184 End-to-End_Error PO--CK 100 100 000 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
188 Command_Timeout -O--CK 100 100 000 - 0 | |
190 Airflow_Temperature_Cel -OS--K 071 069 029 - 29 (Min/Max 21/47) | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 | |
194 Temperature_Celsius -O---K 100 100 000 - 18 | |
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 234851947 | |
196 Reallocated_Event_Count PO--CK 100 100 010 - 0 | |
197 Current_Pending_Sector -O--C- 100 100 000 - 0 | |
198 Offline_Uncorrectable ----C- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 | |
231 Temperature_Celsius PO--CK 091 091 010 - 0 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 128751312 | |
233 Media_Wearout_Indicator PO--CK 091 091 001 - 0 | |
235 Unknown_Attribute PO--CK 100 100 001 - 620 | |
237 Unknown_Attribute -O--CK 100 100 000 - 1602026078828 | |
241 Total_LBAs_Written -O--CK 100 100 000 - 2377652 | |
242 Total_LBAs_Read -O--CK 100 100 000 - 1029736 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 GPL,SL R/O 1 Summary SMART error log | |
0x02 GPL,SL R/O 8 Comprehensive SMART error log | |
0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log | |
0x04 GPL,SL R/O 8 Device Statistics log | |
0x06 GPL,SL R/O 1 SMART self-test log | |
0x07 GPL,SL R/O 2 Extended self-test log | |
0x09 GPL,SL R/W 1 Selective self-test log | |
0x10 GPL,SL R/O 1 SATA NCQ Queued Error log | |
0x11 GPL,SL R/O 1 SATA Phy Event Counters log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xb0 GPL,SL VS 1 Device vendor specific log | |
0xb1 GPL,SL VS 33 Device vendor specific log | |
0xd1 GPL VS 13056 Device vendor specific log | |
0xdf GPL VS 1152 Device vendor specific log | |
0xdf SL VS 128 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (20 sectors) | |
No Errors Logged | |
SMART Error Log Version: 1 | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (2 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Self-test log structure revision number 1 | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 1 (0x0001) | |
SCT Support Level: 0 | |
Device State: Active (0) | |
Current Temperature: 18 Celsius | |
Power Cycle Min/Max Temperature: 17/20 Celsius | |
Lifetime Min/Max Temperature: 10/36 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
Vendor specific: | |
00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/70 Celsius | |
Min/Max Temperature Limit: 0/70 Celsius | |
Temperature History Size (Index): 478 (453) | |
Index Estimated Time Temperature Celsius | |
454 2019-06-30 18:21 17 - | |
... ..(102 skipped). .. - | |
79 2019-06-30 20:04 17 - | |
80 2019-06-30 20:05 18 - | |
... ..(233 skipped). .. - | |
314 2019-06-30 23:59 18 - | |
315 2019-07-01 00:00 19 - | |
316 2019-07-01 00:01 19 - | |
317 2019-07-01 00:02 18 - | |
... ..( 18 skipped). .. - | |
336 2019-07-01 00:21 18 - | |
337 2019-07-01 00:22 19 - | |
338 2019-07-01 00:23 19 - | |
339 2019-07-01 00:24 18 - | |
... ..( 18 skipped). .. - | |
358 2019-07-01 00:43 18 - | |
359 2019-07-01 00:44 19 - | |
... ..( 56 skipped). .. - | |
416 2019-07-01 01:41 19 - | |
417 2019-07-01 01:42 18 - | |
... ..( 8 skipped). .. - | |
426 2019-07-01 01:51 18 - | |
427 2019-07-01 01:52 19 - | |
428 2019-07-01 01:53 18 - | |
... ..( 24 skipped). .. - | |
453 2019-07-01 02:18 18 - | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 2) == | |
0x01 0x008 4 39 --- Lifetime Power-On Resets | |
0x01 0x018 6 155821835157 --- Logical Sectors Written | |
0x01 0x020 6 0 --- Number of Write Commands | |
0x01 0x028 6 67484828568 --- Logical Sectors Read | |
0x01 0x030 6 246 --- Number of Read Commands | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 18 --- Current Temperature | |
0x05 0x010 1 17 --- Average Short Term Temperature | |
0x05 0x018 1 19 --- Average Long Term Temperature | |
0x05 0x020 1 36 --- Highest Temperature | |
0x05 0x028 1 15 --- Lowest Temperature | |
0x05 0x030 1 25 --- Highest Average Short Term Temperature | |
0x05 0x038 1 15 --- Lowest Average Short Term Temperature | |
0x05 0x040 1 20 --- Highest Average Long Term Temperature | |
0x05 0x048 1 16 --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 70 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 0 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 136 --- Number of Hardware Resets | |
0x06 0x010 4 106 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
0x07 ===== = = === == Solid State Device Statistics (rev 1) == | |
0x07 0x008 1 9 --- Percentage Used Endurance Indicator | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0003 4 0 R_ERR response for device-to-host data FIS | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0006 4 0 R_ERR response for device-to-host non-data FIS | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment