gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.4.32 (nixbld@localhost) (gcc version 8.3.0 (GCC)) #1-NixOS SMP Mon Apr 13 08:48:18 UTC 2020
[    0.000000] Machine model: FriendlyElec NanoPi M4
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 32 MiB at 0x00000000f6000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf57ef800-0xf57f0fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 32 pages/cpu s92440 r8192 d30440 u131072
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: systemConfig=/nix/store/p0givs1bwd39azl6ivgaf3c63935dfhd-nixos-system-thirtythree-19.09.2407.b67bc34d4e3 init=/nix/store/p0givs1bwd39azl6ivgaf3c63935dfhd-nixos-system-thirtythree-19.09.2407.b67bc34d4e3/init earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyS2,1500000 panic=5 boot.shell_on_fail loglevel=7
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3900572K/4061184K available (15548K kernel code, 2916K rwdata, 8072K rodata, 8448K init, 549K bss, 127844K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] ftrace: allocating 52385 entries in 205 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=6.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f4a00000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000f49a0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f49b0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x314/0x4a8 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003656] Console: colour dummy device 80x25
[    0.004209] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.005200] pid_max: default: 32768 minimum: 301
[    0.005796] LSM: Security Framework initializing
[    0.006257] Yama: becoming mindful.
[    0.006699] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.007431] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.010561] ASID allocator initialised with 32768 entries
[    0.011224] rcu: Hierarchical SRCU implementation.
[    0.014863] Platform MSI: interrupt-controller@fee20000 domain created
[    0.015909] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.023132] EFI services will not be available.
[    0.024083] smp: Bringing up secondary CPUs ...
[    0.025343] Detected VIPT I-cache on CPU1
[    0.025383] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.025398] GICv3: CPU1: using allocated LPI pending table @0x00000000f49c0000
[    0.025449] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.026270] Detected VIPT I-cache on CPU2
[    0.026299] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.026313] GICv3: CPU2: using allocated LPI pending table @0x00000000f49d0000
[    0.026347] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.027141] Detected VIPT I-cache on CPU3
[    0.027171] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.027184] GICv3: CPU3: using allocated LPI pending table @0x00000000f49e0000
[    0.027217] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.028014] CPU features: detected: EL2 vector hardening
[    0.028040] Detected PIPT I-cache on CPU4
[    0.028074] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.028087] GICv3: CPU4: using allocated LPI pending table @0x00000000f49f0000
[    0.028125] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.028918] Detected PIPT I-cache on CPU5
[    0.028944] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.028956] GICv3: CPU5: using allocated LPI pending table @0x00000000f4a80000
[    0.028986] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.029129] smp: Brought up 1 node, 6 CPUs
[    0.041862] SMP: Total of 6 processors activated.
[    0.042319] CPU features: detected: 32-bit EL0 Support
[    0.042817] CPU features: detected: CRC32 instructions
[    0.071943] CPU: All CPU(s) started at EL2
[    0.072414] alternatives: patching kernel code
[    0.076863] devtmpfs: initialized
[    0.088023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.089009] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.090735] pinctrl core: initialized pinctrl subsystem
[    0.092780] DMI not present or invalid.
[    0.093579] NET: Registered protocol family 16
[    0.096405] DMA: preallocated 256 KiB pool for atomic allocations
[    0.097008] audit: initializing netlink subsys (disabled)
[    0.097732] audit: type=2000 audit(0.092:1): state=initialized audit_enabled=0 res=1
[    0.099084] cpuidle: using governor menu
[    0.099772] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.102302] Serial: AMBA PL011 UART driver
[    0.149054] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.149716] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.150393] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.151047] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.156323] cryptd: max_cpu_qlen set to 1000
[    0.163954] ACPI: Interpreter disabled.
[    0.167859] vcc5v0_core: supplied by vdd_5v
[    0.168429] vcc5v0_sys: supplied by vdd_5v
[    0.168891] vbus_typec: supplied by vdd_5v
[    0.169453] vcc5v0_usb1: supplied by vcc5v0_sys
[    0.170046] vcc3v3_sys: supplied by vcc5v0_core
[    0.170588] vcc3v0_sd: supplied by vcc3v3_sys
[    0.171156] vcc5v0_usb2: supplied by vcc5v0_sys
[    0.172529] iommu: Default domain type: Translated
[   21.221179] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[   21.221767] rcu: 	4-...0: (0 ticks this GP) idle=336/1/0x4000000000000000 softirq=20/24 fqs=2625
[   21.222620] 	(detected by 0, t=5252 jiffies, g=-1155, q=60)
[   21.223157] Task dump for CPU 4:
[   21.223471] kworker/4:1     R  running task        0    42      2 0x0000002a
[   21.224168] Workqueue: pm genpd_power_off_work_fn
[   21.224623] Call trace:
[   21.224869]  __switch_to+0xc4/0x230
[   21.225210]  0xffff0000f40bb468
[   84.375848] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[   84.376427] rcu: 	4-...0: (0 ticks this GP) idle=336/1/0x4000000000000000 softirq=20/24 fqs=10503
[   84.377288] 	(detected by 0, t=21007 jiffies, g=-1155, q=60)
[   84.377832] Task dump for CPU 4:
[   84.378144] kworker/4:1     R  running task        0    42      2 0x0000002a
[   84.378831] Workqueue: pm genpd_power_off_work_fn
[   84.379285] Call trace:
[   84.379528]  __switch_to+0xc4/0x230
[   84.379867]  0xffff0000f40bb468
[  147.529786] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[  147.530365] rcu: 	4-...0: (0 ticks this GP) idle=336/1/0x4000000000000000 softirq=20/24 fqs=18381
[  147.531226] 	(detected by 0, t=36762 jiffies, g=-1155, q=60)
[  147.531770] Task dump for CPU 4:
[  147.532081] kworker/4:1     R  running task        0    42      2 0x0000002a
[  147.532769] Workqueue: pm genpd_power_off_work_fn
[  147.533223] Call trace:
[  147.533466]  __switch_to+0xc4/0x230
[  147.533805]  0xffff0000f40bb468