The following are examples of the four types rate limiters discussed in the accompanying blog post. In the examples below I've used pseudocode-like Ruby, so if you're unfamiliar with Ruby you should be able to easily translate this approach to other languages. Complete examples in Ruby are also provided later in this gist.
In most cases you'll want all these examples to be classes, but I've used simple functions here to keep the code samples brief.
This uses a basic token bucket algorithm and relies on the fact that Redis scripts execute atomically. No other operations can run between fetching the count and writing the new count.
The full script with a small test suite is available, but here is a sketch:
# How many requests per second do you want a user to be allowed to do?
REPLENISH_RATE = 100
# How much bursting do you want to allow?
CAPACITY = 5 * REPLENISH_RATE
SCRIPT = File.read('request_rate_limiter.lua')
def check_request_rate_limiter(user)
# Make a unique key per user.
prefix = 'request_rate_limiter.' + user
# You need two Redis keys for Token Bucket.
keys = [prefix + '.tokens', prefix + '.timestamp']
# The arguments to the LUA script. time() returns unixtime in seconds.
args = [REPLENISH_RATE, CAPACITY, Time.new.to_i, 1]
begin
allowed, tokens_left = redis.eval(SCRIPT, keys, args)
rescue RedisError => e
# Fail open. We don't want a hard dependency on Redis to allow traffic.
# Make sure to set an alert so you know if this is happening too much.
# Our observed failure rate is 0.01%.
puts 'Redis failed: ' + e
return
end
if !allowed
raise RateLimitError.new(status_code = 429)
end
endHere is the corresponding request_rate_limiter.lua script:
local tokens_key = KEYS[1]
local timestamp_key = KEYS[2]
local rate = tonumber(ARGV[1])
local capacity = tonumber(ARGV[2])
local now = tonumber(ARGV[3])
local requested = tonumber(ARGV[4])
local fill_time = capacity/rate
local ttl = math.floor(fill_time*2)
local last_tokens = tonumber(redis.call("get", tokens_key))
if last_tokens == nil then
last_tokens = capacity
end
local last_refreshed = tonumber(redis.call("get", timestamp_key))
if last_refreshed == nil then
last_refreshed = 0
end
local delta = math.max(0, now-last_refreshed)
local filled_tokens = math.min(capacity, last_tokens+(delta*rate))
local allowed = filled_tokens >= requested
local new_tokens = filled_tokens
if allowed then
new_tokens = filled_tokens - requested
end
redis.call("setex", tokens_key, ttl, new_tokens)
redis.call("setex", timestamp_key, ttl, now)
return { allowed, new_tokens }Because Redis is so fast, doing the naive thing works. Just add a random token to a set at the start of a request and remove it from the set when you're done. If the set is too large, reject the request.
Again the full code is available and a sketch follows:
# The maximum length a request can take
TTL = 60
# How many concurrent requests a user can have going at a time
CAPACITY = 100
SCRIPT = File.read('concurrent_requests_limiter.lua')
class ConcurrentRequestLimiter
def check(user)
@timestamp = Time.new.to_i
# A string of some random characters. Make it long enough to make sure two machines don't have the same string in the same TTL.
id = Random.new.bytes(4)
key = 'concurrent_requests_limiter.' + user
begin
# Clear out old requests that probably got lost
redis.zremrangebyscore(key, '-inf', @timestamp - TTL)
keys = [key]
args = [CAPACITY, @timestamp, id]
allowed, count = redis.eval(SCRIPT, keys, args)
rescue RedisError => e
# Similarly to above, remember to fail open so Redis outages don't take down your site
log.info('Redis failed: ' + e)
return
end
if allowed
# Save it for later so we can remove it when the request is done
@id_in_redis = id
else
raise RateLimitError.new(status_code: 429)
end
end
# Call this method after a request finishes
def post_request_bookkeeping(user)
if not @id_in_redis
return
end
key = 'concurrent_requests_limiter.' + user
removed = redis.zrem(key, @id_in_redis)
end
def do_request(user)
check(user)
# Do the actual work here
post_request_bookkeeping(user)
end
endThe content of concurrent_requests_limiter.lua is simple and is meant to guarantee the atomicity of the ZCARD and ZADD.
local key = KEYS[1]
local capacity = tonumber(ARGV[1])
local timestamp = tonumber(ARGV[2])
local id = ARGV[3]
local count = redis.call("zcard", key)
local allowed = count < capacity
if allowed then
redis.call("zadd", key, timestamp, id)
end
return { allowed, count }We can now move from preventing abuse to adding stability to your site with load shedders. If you can categorize traffic into buckets where no fewer than X% of your workers should be available to process high-priority traffic, then you're in luck: this type of algorithm can help. We call it a load shedder instead of a rate limiter because it isn't trying to reduce the rate of a specific user's requests. Instead, it adds backpressure so internal systems can recover.
When this load shedder kicks in it will start dropping non-critical traffic. There should be alarm bells ringing and people should be working to get the traffic back, but at least your core traffic will work. For Stripe, high-priority traffic has to do with creating charges and moving money around, and low-priority traffic has to do with analytics and reporting.
The great thing about this load shedder is that its implementation is identical to the Concurrent Requests Limiter, except you don't use a user-specific key, you just use a global key.
limiter = ConcurrentRequestLimiter.new
def check_fleet_usage_load_shedder
if is_high_priority_request
return
end
begin
return limiter.do_request('fleet_usage_load_shedder')
rescue RateLimitError
raise RateLimitError.new(status_code: 503)
end
endThis load shedder is the last resort, and only kicks in when a machine is under heavy pressure and needs to offload. The code for determining how many workers are in use is dependent on your infrastructure. The general outline is to figure out some measure of "Is our infrastructure currently failing?" If that function returns something non-zero, start throwing out your least important requests (after waiting a short period to allow imprecise measurements) with higher and higher probability. After a period of time doing that, move on to more requests until you are throwing out everything except for the most critical traffic.
The most important behavior for this load shedder is to slowly take action. Don't start throwing out traffic until your infrastructure has been sad for quite a while (30 seconds), and don't instantaneously add traffic back. Sharp changes in shedding amounts will cause wild swings and lead to failure modes that are hard to diagnose.
As before, the full script with a small test suite is available, and here is a sketch:
END_OF_GOOD_UTILIZATION = 0.7
START_OF_BAD_UTILIZATION = 0.8
# Assuming a sample rate of 8 seconds, so 28 == 2.5 * 8 == guaranteed 3 samples
NUMBER_OF_SECONDS_BEFORE_SHEDDING_STARTS = 28
NUMBER_OF_SECONDS_TO_SHED_ALL_TRAFFIC = 120
RESTING_SHED_AMOUNT = -NUMBER_OF_SECONDS_BEFORE_SHEDDING_STARTS / NUMBER_OF_SECONDS_TO_SHED_ALL_TRAFFIC
@shedding_amount_last_changed = 0
@shedding_amount = 0
def check_worker_utilization_load_shedder
chance = drop_chance(current_worker_utilization)
if chance == 0
dropped = false
else
dropped = Random.rand() < chance
end
if dropped
raise RateLimitError.new(status_code: 503)
end
end
def drop_chance(utilization)
update_shedding_amount_derivative(utilization)
how_much_traffic_to_shed
end
def update_shedding_amount_derivative(utilization)
# A number from -1 to 1
amount = 0
# Linearly reduce shedding
if utilization < END_OF_GOOD_UTILIZATION
amount = utilization / END_OF_GOOD_UTILIZATION - 1
# A dead zone
elsif utilization < START_OF_BAD_UTILIZATION
amount = 0
# Shed traffic
else
amount = (utilization - START_OF_BAD_UTILIZATION) / (1 - START_OF_BAD_UTILIZATION)
end
# scale the derivative so we take time to shed all the traffic
@shedding_amount_derivative = clamp(amount, -1, 1) / NUMBER_OF_SECONDS_TO_SHED_ALL_TRAFFIC
end
def how_much_traffic_to_shed
now = Time.now().to_f
seconds_since_last_math = clamp(now - @shedding_amount_last_changed, 0, NUMBER_OF_SECONDS_BEFORE_SHEDDING_STARTS)
@shedding_amount_last_changed = now
@shedding_amount += seconds_since_last_math * @shedding_amount_derivative
@shedding_amount = clamp(@shedding_amount, RESTING_SHED_AMOUNT, 1)
end
def current_worker_utilization
# Returns a double from 0 to 1.
# 1 means every process is busy, .5 means 1/2 the processes are working, and 0 means the machine is servicing 0 requests
# This is infra dependent on how to read this value
end
def clamp(val, min, max)
if val < min
return min
elsif val > max
return max
else
return val
end
end