Skip to content

Instantly share code, notes, and snippets.

Corey Sheldon linux-modder

Block or report user

Report or block linux-modder

Hide content and notifications from this user.

Learn more about blocking users

Contact Support about this user’s behavior.

Learn more about reporting abuse

Report abuse
View GitHub Profile
View gist:93104c735375932d1125
There's another reason too:
Khaytsus> mikedep333: I, personally, am tired of your spamming your blog.
mikedep333> Khaytsus, you have persuaded me to blog less often.
Khaytsus> Spam less often too. That'd be great.
mikedep333> K, I will send the commands to my botnet
* Khaytsus shakes
View hexchat 2.11.0
HexChat 2.11.0
GTK+ interface ........ : yes
Text interface ........ : no
Theme manager ......... : no
OpenSSL support ....... : yes
D-Bus support ......... : yes
libnotify support ..... : yes
libcanberra support ... : yes
@linux-modder
linux-modder / B43
Created Aug 20, 2014
Broadcom driver install
View B43
## assumes a b43 brcm43xx or bcma or broadcom-wl driver onboard
## installing inxi is highly helpful for this and many other things so lets install now:
sudo apt-get install inxi
## or
sudo yum/yast/zypper install inxi
@linux-modder
linux-modder / LVM
Last active Aug 29, 2015
LVM Work #1 Creation & Mounting (without luks/dm-crypt)
View LVM
########
For the purpose of this purpose of this tutorial NO RAID / Luks / EFI are in play ( I have separate Gist that address these cases)
For all LVM tutorials I assume a default GPT partition table is laid on the target drive however with a few changes can be done on a MBR / MSDOS install as long as the drive is <2Tb at which point MBR is no longer an option.
Default layout referenced in this write up is a follows ---the following sample output is the starting point i will explain how
to create it as well.
[linuxdev@linuxdevel ~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
@linux-modder
linux-modder / LVM (With luks)
Last active Aug 29, 2015
LVM Work #2 Creating & Mounting (WIth luks/dm-crypt)
View LVM (With luks)
#########
For the purpose of this tutorial -- NO RAID / EFI are in play ( I have separate Gist that address these cases)
For all LVM tutorials I assume a default GPT partition table is laid on the target drive however with a few changes can be done on a MBR / MSDOS install as long as the drive is <2 Tb at which point MBR is no longer an option.
Default layout referenced in this write-up is a follows ---the following sample output is the starting point i will explain how
to create it as well. with the luks crypt being an LVM inside sda3.
[linuxdev@linuxdevel ~]$ lsblk
@linux-modder
linux-modder / encryptfs recovery
Last active Aug 29, 2015
Recover your encryptfs.Private /home
View encryptfs recovery
###From another gist member
USING ecryptfs-recover-private TO RECOVER ENCRYPTED HOME IN MINT 17 CINNAMON
--------------------------------------
This has saved more than twice when somehow I found myself...without a backup ?!
My setup had encrypted and encrypted home. If you only encrypted home then I believe you can start at:
@linux-modder
linux-modder / Interactive LuksCrypt
Last active Aug 29, 2015
PGP key LuksCrypt (with or without LVM) ---adapted from wiki.gentoo.org &
View Interactive LuksCrypt
###### This tutorial is a merge of http://wiki.gentoo.org/wiki/EFI_Gentoo_End_to_End_Install/Preparing_the_LUKS #######
###### LVM_Filesystem_and_Boot_USB_Key and my previous tutorials on the subject #######
For the purpose of this tutorial -- NO RAID / EFI are in play ( I have separate Gist that address these cases)
For all LVM tutorials I assume a default GPT partition table is laid on the target drive however with a few changes can be done on a MBR / MSDOS install as long as the drive is <2 Tb at which point MBR is no longer an option.
Default layout referenced in this write-up is a follows ---the following sample output is the starting point i will explain how
to create it as well. with the luks crypt being an LVM inside sda3.
View gist:d412ff3fecf417c7e75d
gist-paste /etc/fstab
/usr/share/rubygems/rubygems/core_ext/kernel_require.rb:55:in `require': cannot load such file -- gist (LoadError)
from /usr/share/rubygems/rubygems/core_ext/kernel_require.rb:55:in `require'
from /usr/bin/gist-paste:7:in `<main>'
View gist:4b6b0066f6578d80886e
An error occurred while installing the items
session context was:(profile=SDKProfile, phase=org.eclipse.equinox.internal.p2.engine.phases.Install, operand=null --> [R]com.android.ide.eclipse.adt 23.0.4.1468518, action=org.eclipse.equinox.internal.p2.touchpoint.eclipse.actions.InstallBundleAction).
Could not acquire the framework manipulator service.
Could not acquire the framework manipulator service.
View gist:424a2488f1e69b24ce39
~/testCloud :python testCloud.py --atomic http://mirror.umd.edu/fedora/linux/releases/21/Cloud/Images/x86_64/Fedora-Cloud-Atomic-20141203-21.x86_64.qcow2
Traceback (most recent call last):
File "testCloud.py", line 21, in <module>
import config
File "/home/server/testCloud/config.py", line 10
password:passwOrd
^
SyntaxError: invalid syntax
You can’t perform that action at this time.