liv3010m

Based on this: http://www.nathanbunn.com/NandUpgradeSteps/
using this: https://github.com/ihaveamac/ninfs
and using this: https://github.com/rajkosto/memloader

Using native MacOS tools + NinFS and memloader on the switch.

- Make Backup of 32G NAND
    Use Hekate
- Install 256G NAND
- Restore boot0/1 backups with hekate

liv3010m

#!/usr/bin/env bash
sudo hdiutil create -o /tmp/Monterey -size 16g -volname Monterey -layout SPUD -fs HFS+J
sudo hdiutil attach /tmp/Monterey.dmg -noverify -mountpoint /Volumes/Monterey
sudo /Applications/Install\ macOS\ Monterey.app/Contents/Resources/createinstallmedia --volume /Volumes/Monterey --nointeraction
hdiutil eject -force  /Volumes/Install\ macOS\ Monterey
hdiutil convert /tmp/Monterey.dmg -format UDTO -o ~/Downloads/Monterey
mv -v ~/Downloads/Monterey.cdr ~/Downloads/Monterey.iso
sudo rm -fv /tmp/Monterey.dmg

liv3010m

#!/bin/sh
#
# shell script to rename a virtual machine in ESXi
#set -x

if [ $# -ne 4 ]; then
  echo "Usage: $0 VOLNAME DIRNAME OLDNAME NEWNAME
  
where VOLNAME is the volume name, e.g. datastore1,
      DIRNAME is the the name of the directory of the virtual machine,

liv3010m

WARNING

These intructions might work, but they need a bit of attention. I've been reading through ipf and smf documentation and have found a few ways to improve this process. When I have time I'll add that information here, until then, be sure to look into the ipf settings if you're having issues with routing. Good luck!

Foreword

This is a modified version of sjorge's instructions for Single IP with NAT. Those instructions can be found here: https://docu.blackdot.be/snipets/solaris/smartos-nat

The primary difference is that this version does not rely on etherstubs for internal switching, but instead uses a vlan configuration. The benefits of this method over using etherstubs are:

1. Project Fifo (project-fifo.net) can create vms and zones with vlans, but does not currently have etherstub support.
2. Vlan switching is supposedly more efficient than creating an etherstub to handle switching. I have not tested this statement.

liv3010m

Share a ZFS file system over SMB/CIFS and advertise it via mDNS so that it shows up in the OS X Finder. Assumes SmartOS, but should work fine on any illumos distribution.

# Allow guest access to a trusted subnet
zfs set sharesmb=ro=192.168.1.0/25,guestok=true,name=store zones/store

# Advertise the SMB service, it will now show up in Finder
dns-sd -R "Loft Server" _smb._tcp local 445 &

# Give it a pretty icon. If you want something different, choose from the list in

liv3010m

## Sublime Text 3 Serial key build is 3176

> * Added these lines into  /etc/hosts 

127.0.0.1       www.sublimetext.com
127.0.0.1       license.sublimehq.com

> * Used the license key

----- BEGIN LICENSE -----

liv3010m

BIOS Setup
----------

1) Boot into the BIOS setup utility (press F2 or DEL) and open Advanced > Serial Port Console Redirection.
2) Disable COM1 and EMS console redirection and enable SOL redirection.
3) Set the SOL console redirection settings as follows:

       Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.       
          Advanced                                                              
/----------------------------------------------------+-------------------------\

liv3010m

Keybase proof

I hereby claim:

• I am liv3010m on github.
• I am liv3010m (https://keybase.io/liv3010m) on keybase.
• I have a public key ASBMLwV0dVj-ZVHaw6HoKeSsJ1u_Ab_jMePLxSfHiVKBTAo

To claim this, I am signing this object: