I hereby claim:
- I am liv3010m on github.
- I am liv3010m (https://keybase.io/liv3010m) on keybase.
- I have a public key ASBMLwV0dVj-ZVHaw6HoKeSsJ1u_Ab_jMePLxSfHiVKBTAo
To claim this, I am signing this object:
I hereby claim:
To claim this, I am signing this object:
BIOS Setup | |
---------- | |
1) Boot into the BIOS setup utility (press F2 or DEL) and open Advanced > Serial Port Console Redirection. | |
2) Disable COM1 and EMS console redirection and enable SOL redirection. | |
3) Set the SOL console redirection settings as follows: | |
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. | |
Advanced | |
/----------------------------------------------------+-------------------------\ |
## Sublime Text 3 Serial key build is 3176 | |
> * Added these lines into /etc/hosts | |
127.0.0.1 www.sublimetext.com | |
127.0.0.1 license.sublimehq.com | |
> * Used the license key | |
----- BEGIN LICENSE ----- |
Share a ZFS file system over SMB/CIFS and advertise it via mDNS so that it shows up in the OS X Finder. Assumes SmartOS, but should work fine on any illumos distribution.
# Allow guest access to a trusted subnet
zfs set sharesmb=ro=192.168.1.0/25,guestok=true,name=store zones/store
# Advertise the SMB service, it will now show up in Finder
dns-sd -R "Loft Server" _smb._tcp local 445 &
# Give it a pretty icon. If you want something different, choose from the list in
These intructions might work, but they need a bit of attention. I've been reading through ipf and smf documentation and have found a few ways to improve this process. When I have time I'll add that information here, until then, be sure to look into the ipf settings if you're having issues with routing. Good luck!
This is a modified version of sjorge's instructions for Single IP with NAT. Those instructions can be found here: https://docu.blackdot.be/snipets/solaris/smartos-nat
The primary difference is that this version does not rely on etherstubs for internal switching, but instead uses a vlan configuration. The benefits of this method over using etherstubs are:
#!/bin/sh | |
# | |
# shell script to rename a virtual machine in ESXi | |
#set -x | |
if [ $# -ne 4 ]; then | |
echo "Usage: $0 VOLNAME DIRNAME OLDNAME NEWNAME | |
where VOLNAME is the volume name, e.g. datastore1, | |
DIRNAME is the the name of the directory of the virtual machine, |
#!/usr/bin/env bash | |
sudo hdiutil create -o /tmp/Monterey -size 16g -volname Monterey -layout SPUD -fs HFS+J | |
sudo hdiutil attach /tmp/Monterey.dmg -noverify -mountpoint /Volumes/Monterey | |
sudo /Applications/Install\ macOS\ Monterey.app/Contents/Resources/createinstallmedia --volume /Volumes/Monterey --nointeraction | |
hdiutil eject -force /Volumes/Install\ macOS\ Monterey | |
hdiutil convert /tmp/Monterey.dmg -format UDTO -o ~/Downloads/Monterey | |
mv -v ~/Downloads/Monterey.cdr ~/Downloads/Monterey.iso | |
sudo rm -fv /tmp/Monterey.dmg |
Based on this: http://www.nathanbunn.com/NandUpgradeSteps/ | |
using this: https://github.com/ihaveamac/ninfs | |
and using this: https://github.com/rajkosto/memloader | |
Using native MacOS tools + NinFS and memloader on the switch. | |
- Make Backup of 32G NAND | |
Use Hekate | |
- Install 256G NAND | |
- Restore boot0/1 backups with hekate |