Banana Pi R1 Switch setting

install vlan

sudo apt-get install vlan

interfaces

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

auto eth0.101
iface eth0.101 inet dhcp

auto eth0.102
iface eth0.102 inet static
        address 192.168.1.1
        netmask 255.255.255.0

swconfig

#!/bin/sh

#---------------------------#
# BPI-R1 VLAN configuration #
#---------------------------#
#
# This will create the following ethernet ports:
# - eth0.101 = WAN (single port)
# - eth0.102 = LAN (4 port switch)
#
# You have to adjust your /etc/network/interfaces
#
# Comment out the next line to enable the VLAN configuration:
#exit 0

ifconfig eth0 up

# The swconfig port number are:
# |2|1|0|4|  |3|
# (looking at front of ports)

swconfig dev eth0 set reset 1
swconfig dev eth0 set enable_vlan 1
swconfig dev eth0 vlan 101 set ports '3 8t'
swconfig dev eth0 vlan 102 set ports '4 0 1 2 8t'
swconfig dev eth0 set apply 1