nut NSYS E series - blazer driver log

nut-nsys-blazer.log

~# /lib/nut/blazer_usb -a nsys1 -DDDDD -x vendorid=0001
Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4)
   0.000000	send_to_all: SETINFO driver.parameter.vendorid "0001"
   0.000038	debug level is '5'
   0.021080	Checking device (1D6B/0003) (002/001)
   0.036745	- VendorID: 1d6b
   0.036778	- ProductID: 0003
   0.036819	- Manufacturer: unknown
   0.036842	- Product: unknown
   0.036856	- Serial Number: unknown
   0.036871	- Bus: 002
   0.036888	- Device release number: 0415
   0.036903	Trying to match device
   0.036926	Device does not match - skipping
   0.036956	Checking device (0001/0000) (001/012)
   0.038153	- VendorID: 0001
   0.038183	- ProductID: 0000
   0.038193	- Manufacturer: unknown
   0.038203	- Product: MEC0003
   0.038213	- Serial Number: unknown
   0.038222	- Bus: 001
   0.038234	- Device release number: 0100
   0.038247	Trying to match device
   0.038303	Device matches
   0.038462	nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0)
   0.038489	send_to_all: SETINFO ups.vendorid "0001"
   0.038512	send_to_all: SETINFO ups.productid "0000"
   0.038533	send_to_all: SETINFO device.type "ups"
   0.038553	send_to_all: SETINFO driver.version "2.7.4"
   0.038571	send_to_all: SETINFO driver.version.internal "0.12"
   0.038588	send_to_all: SETINFO driver.name "blazer_usb"
   0.038607	Trying megatec protocol...
   0.038625	send: Q1
   0.042389	received 47 (40)
   0.042425	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
   0.042454	send_to_all: SETINFO input.voltage "0.0"
   0.042478	send_to_all: SETINFO input.voltage.fault "0.0"
   0.042500	send_to_all: SETINFO output.voltage "0.0"
   0.042560	send_to_all: SETINFO ups.load "0"
   0.042580	send_to_all: SETINFO input.frequency "0.0"
   0.042600	send_to_all: SETINFO battery.voltage "0.00"
   0.042617	send_to_all: SETINFO ups.temperature "0.0"
   0.042637	send_to_all: SETINFO ups.beeper.status "disabled"
   0.042670	send_to_all: SETINFO ups.type "online"
   0.042696	send_to_all: SETINFO ups.status "OL"
   0.042713	Status read in 1 tries
   0.042730	Supported UPS detected with megatec protocol
   0.042747	send: F
   0.044819	received 22 (35)
   0.044865	read: #000.0 0.0 00.00 00.0
   0.044894	send_to_all: SETINFO input.voltage.nominal "0"
   0.044922	send_to_all: SETINFO input.current.nominal "0.0"
   0.044942	send_to_all: SETINFO battery.voltage.nominal "0.0"
   0.044963	send_to_all: SETINFO input.frequency.nominal "0"
   0.044982	Ratings read in 1 tries
   0.045001	send: I
   0.048128	received 39 (35)
   0.048164	read: #
   0.048191	send_to_all: SETINFO ups.mfr ""
   0.048211	send_to_all: SETINFO ups.model ""
   0.048230	send_to_all: SETINFO ups.firmware ""
   0.048246	Vendor information read in 1 tries
   0.048262	No values provided for battery high/low voltages in ups.conf

   0.048287	send_to_all: SETINFO battery.voltage.low "0.00"
   0.048307	send_to_all: SETINFO battery.voltage.high "0.00"
   0.048327	Using 'guestimation' (low: 0.000000, high: 0.000000)!
   0.048344	Battery runtime will not be calculated (runtimecal not set)
   0.048363	send_to_all: SETINFO ups.delay.start "180"
   0.048382	send_to_all: SETINFO ups.delay.shutdown "30"
   0.048401	send_to_all: ADDCMD beeper.toggle
   0.048421	send_to_all: ADDCMD load.off
   0.048437	send_to_all: ADDCMD load.on
   0.048453	send_to_all: ADDCMD shutdown.return
   0.048471	send_to_all: ADDCMD shutdown.stayoff
   0.048487	send_to_all: ADDCMD shutdown.stop
   0.048502	send_to_all: ADDCMD test.battery.start
   0.048522	send_to_all: ADDCMD test.battery.start.deep
   0.048539	send_to_all: ADDCMD test.battery.start.quick
   0.048555	send_to_all: ADDCMD test.battery.stop
   0.048573	send: Q1
   0.052337	received 47 (40)
   0.052373	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
   0.052419	send_to_all: DATAOK
   0.052527	dstate_init: sock /var/run/nut/blazer_usb-nsys1 open on fd 5
   0.052551	send_to_all: SETINFO driver.parameter.pollinterval "2"
   0.052571	send_to_all: SETINFO driver.parameter.synchronous "no"
   0.052591	send_to_all: SETINFO device.mfr ""
   0.052614	send_to_all: SETINFO device.model ""
   0.052631	send: Q1
   0.056322	received 47 (40)
   0.056341	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
   2.054721	send: Q1
   2.058354	received 47 (40)
   2.058387	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
   4.056179	send: Q1
   4.059970	received 47 (40)
   4.060005	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
   6.058255	send: Q1
   6.062201	received 47 (40)
   6.062235	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
   8.059061	send: Q1
   8.062955	received 47 (40)
   8.062991	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
  10.060180	send: Q1
  10.063964	received 47 (40)
  10.064001	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
  12.062256	send: Q1
  12.065983	received 47 (40)
  12.066016	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000
  14.063320	send: Q1
  14.067216	received 47 (40)
  14.067255	read: (000.0 000.0 000.0 000 00.0 0.00 00.0 00000000