- 6x 2mm string LED, green, blue and pink are bright colors, where green is the brightest one. (12e) I can confirm that are to bright in my case, I still need to fix it.
- I used 10m of 10x12 Polyamide(PA or PA12) tube but PE or PEXa material also work, can be found in some specialized store.
- Some long straight 20cm outer diameter tube used for the structure, easy to be found in any local store. I use about 7-8m (20cm each leg and 50cm or 30cm for the body)
- 6x 8mm tee connector. (2.25e)
- 2x 20mm to 14mm Hose Connector. (3.4e)
- 2x 20mm straight connector, it's not the best one but it works, I finally use another one from a local store. (3.5e)
- 6x 5mm 5 way connector. (5.35e)
- Mark 6 parts for the 10m tube, 1.67m in my case with a result of an inner diameter of 50cm. Then cut it with a generic saw.
- Drill a small hole at one of the ends of the tube (at 4-5cm) like you see in the final result here:
- Attach the led string to some tool to help to add the cable inside the tube loop.
- Join the Tee connector + hose connector + straing connector.
- Attach the Tee connector to each part of the tube. Use a hot silicone gun to fix the led string, tube end and tee connector. Also for the hole.
- Use some eletric tape to hide and fix the remaining led string.
- To fix the battery holder I use velcro like in that image. I also put blue stickers to know the led color.
- Cut the straight tube in parts that you like and join all of them with the 5 way connector and the tube loop connector (20cm each leg and 50cm or 30cm for the body).
