Skip to content

Instantly share code, notes, and snippets.

@lnoering

lnoering/apcu.ini

Last active February 24, 2019 11:48
Show Gist options
  • Save lnoering/6dcd743dab8aa102ba94 to your computer and use it in GitHub Desktop.
Save lnoering/6dcd743dab8aa102ba94 to your computer and use it in GitHub Desktop.
Download ZIP
[install] Install Server CentOS 7 for Magento
Raw
apcu.ini
; Enable APCu extension module
extension = apcu.so
; This can be set to 0 to disable APCu
apc.enabled=1
; Setting this enables APCu for the CLI version of PHP
; (Mostly for testing and debugging).
;apc.enable_cli=0
; Sets the path to text files containing caches to load from disk upon
; initialization of APCu. preload_path should be a directory where each
; file follows $key.data where $key should be used as the entry name
; and the contents of the file contains serialized data to use as the value
; of the entry.
;apc.preload_path=
; The size of each shared memory segment, with M/G suffixe
apc.shm_size=256M
; The number of seconds a cache entry is allowed to idle in a slot in case
; this cache entry slot is needed by another entry.
;apc.ttl=0
; The number of seconds that a cache entry may remain on the
; garbage-collection list.
;apc.gc_ttl=3600
; If you begin to get low on resources, an expunge of the cache
; is performed if it is less than half full. This is not always
; a suitable way of determining if an expunge of the cache
; should be per apc.smart allows you to set a runtime configuration
; value which is used to determine if an expunge should be run
; if (available_size < apc.smart * requested_size)
;apc.smart=0
; A "hint" about the number variables expected in the cache.
; Set to zero or omit if you are not sure;
;apc.entries_hint=4096
; The mktemp-style file_mask to pass to the mmap module
apc.mmap_file_mask=/tmp/apc.XXXXXX
; On very busy servers whenever you start the server or
; modify files you can create a race of many processes
; all trying to cache the same data at the same time.
; By default, APCu attempts to prevent "slamming" of a key.
; A key is considered "slammed" if it was the last key set,
; and a context other than the current one set it ( ie. it
; was set by another process or thread )
;apc.slam_defense=1
; Defines which serializer should be used
; Default is the standard PHP serializer.
;apc.serializer='default'
; use the SAPI request start time for TTL
;apc.use_request_time=1
; Enables APCu handling of signals, such as SIGSEGV, that write core files
; when signaled. APCu will attempt to unmap the shared memory segment in
; order to exclude it from the core file
;apc.coredump_unmap=0
; RFC1867 File Upload Progress hook handler
;apc.rfc1867=0
;apc.rfc1867_prefix =upload_
;apc.rfc1867_name=APC_UPLOAD_PROGRESS
;apc.rfc1867_freq=0
;apc.rfc1867_ttl=3600
Raw
config-pagespeed.sh
sudo mkdir -p /var/cache/ngx_pagespeed_cache
sudo chown -R nobody:nobody /var/cache/ngx_pagespeed_cache
#Arquivo pagespeed.conf já deverá estar no servidor.
mv ./pagespeed.conf /etc/nginx/default.d/
Raw
create-db-user-percona.sh
#https://www.digitalocean.com/community/tutorials/como-criar-um-novo-usuario-e-conceder-permissoes-no-mysql-ptCREATE DATABASE menagerie;
#mysql -u root -p
read -p "Nome do Banco de Dados ?" NAMEDATABASE
echo "CREATE DATABASE $NAMEDATABASE;" | mysql -u root -p
read -p "Nome do Usuário para o Banco de Dados [ $NAMEDATABASE ] ?" NAMEUSER
read -p "Senha do Usuário [ $NAMEUSER ] para o Banco de Dados [ $NAMEDATABASE ] ?" PASSUSER
echo "CREATE USER $NAMEUSER@localhost IDENTIFIED BY '$PASSUSER';" | mysql -u root -p
#GRANT ALL PRIVILEGES ON * . * TO 'novousuario'@'localhost';
#apenas na tabela informada (NAMEDATABASE) [create-database-percona.sh]
echo "GRANT CREATE,DELETE,INSERT,SELECT,UPDATE ON $NAMEDATABASE . * TO 'magento'@'localhost';" | mysql -u root -p
echo "FLUSH PRIVILEGES;" | mysql -u root -p
Raw
install-extensions-php-magento.sh
sudo yum php-mcrypt php-gd php-xml php-xmlrpc php-curl php-pgsql php-apc
#php-pecl-apc php-cli php-pear php-pdo php-mysqlnd
#php-pgsql php-pecl-mongo php-sqlite php-pecl-memcache php-pecl-memcached php-gd php-mbstring php-mcrypt php-xml
Raw
install-magento-conf.sh
#Arquivo magento.conf já deverá estar no servidor.
echo "Informe a URL da loja : "
read URL_LOJA
sudo sed -i -e 's/magento.local.com/'"$URL_LOJA/g"'' ./magento.conf
mv ./magento.conf /etc/nginx/conf.d/"$URL_LOJA".conf
Raw
install-nginx.sh
#http://nginx.org/en/linux_packages.html
#see pagespeed
#https://media-glass.es/2015/02/14/nginx-ngx_pagespeed-centos-7/
#https://www.digitalocean.com/community/tutorials/how-to-add-ngx_pagespeed-to-nginx-on-centos-7
sudo yum install centos-release-scl
sudo yum install devtoolset-3-gcc-c++ devtoolset-3-binutils
sudo yum install wget curl unzip gcc-c++ pcre-devel zlib-devel openssl openssl-devel GeoIP GeoIP-devel
cd $HOME
NPS_VERSION=1.10.33.4
wget https://github.com/pagespeed/ngx_pagespeed/archive/release-${NPS_VERSION}-beta.zip -O release-${NPS_VERSION}-beta.zip
unzip release-${NPS_VERSION}-beta.zip
cd ngx_pagespeed-release-${NPS_VERSION}-beta/
wget https://dl.google.com/dl/page-speed/psol/${NPS_VERSION}.tar.gz
tar -xzvf ${NPS_VERSION}.tar.gz # extracts to psol/
cd $HOME
wget http://github.com/agentzh/echo-nginx-module/archive/v0.46.tar.gz
tar xvzf v0.46.tar.gz
cd $HOME
##PS_NGX_EXTRA_FLAGS="--with-cc=/opt/rh/devtoolset-3/root/usr/bin/gcc"
NGINX_VERSION=1.8.0
wget http://nginx.org/download/nginx-${NGINX_VERSION}.tar.gz
tar -xvzf nginx-${NGINX_VERSION}.tar.gz
cd nginx-${NGINX_VERSION}/
./configure \
--add-module=$HOME/ngx_pagespeed-release-${NPS_VERSION}-beta \
--add-module=$HOME/echo-nginx-module-0.46 \
--prefix=/etc/nginx \
--sbin-path=/usr/sbin/nginx \
--conf-path=/etc/nginx/nginx.conf \
--error-log-path=/var/log/nginx/error.log \
--http-log-path=/var/log/nginx/access.log \
--pid-path=/var/run/nginx.pid \
--lock-path=/var/run/nginx.lock \
--http-client-body-temp-path=/var/cache/nginx/client_temp \
--http-proxy-temp-path=/var/cache/nginx/proxy_temp \
--http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp \
--http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp \
--http-scgi-temp-path=/var/cache/nginx/scgi_temp \
--user=nginx \
--group=nginx \
--with-http_ssl_module \
--with-http_realip_module \
--with-http_addition_module \
--with-http_sub_module \
--with-http_dav_module \
--with-http_flv_module \
--with-http_mp4_module \
--with-http_gunzip_module \
--with-http_gzip_static_module \
--with-http_random_index_module \
--with-http_secure_link_module \
--with-http_stub_status_module \
--with-http_auth_request_module \
--with-mail \
--with-mail_ssl_module \
--with-file-aio \
--with-http_spdy_module \
--with-http_geoip_module \
--with-cc=/opt/rh/devtoolset-3/root/usr/bin/gcc
make
make install
cd $HOME
#Arquivo nginx já deverá estar no servidor.
mv ./nginx /etc/init.d/
chmod +x /etc/init.d/nginx
chkconfig --add nginx
chkconfig --level 345 nginx on
#sudo chkconfig nginx on
systemctl daemon-reload
#To add the CentOS 7 EPEL repository, open terminal and use the following command
#sudo yum install epel-release
#Now that the Nginx repository is installed on your server, install Nginx using the following yum command:
#sudo yum install nginx
PROC=$(sudo grep "model name" /proc/cpuinfo | wc -l)
#PROC=cat /proc/cpuinfo | grep 'cpu cores' | grep -o '[0-9]*'
#PROC=sudo cat /proc/cpuinfo | grep 'cpu cores' | grep -o '[0-9]*'
#Arquivo nginx.conf deve estar no servidor já
#sudo sed -i -e 's/worker_processes 4;/worker_processes "$PROC";/g' ./nginx.conf
sudo sed -i -e 's/worker_processes 4;/worker_processes '"$PROC"';/g' ./nginx.conf
mkdir /etc/nginx/conf.d
mkdir /etc/nginx/default.d
sudo mv /etc/nginx/nginx.conf /etc/nginx/nginx.conf.orig
sudo mv ./nginx.conf /etc/nginx/nginx.conf
sudo systemctl enable nginx
#Nginx does not start on its own. To get Nginx running, type:
sudo systemctl start nginx
#If you are running a firewall, run the following commands to allow HTTP and HTTPS traffic:
#sudo firewall-cmd --permanent --zone=public --add-service=http
#sudo firewall-cmd --permanent --zone=public --add-service=https
#sudo firewall-cmd --reload
#From the command line, you can find this a few ways. First, you can use the iproute2 tools to get your address by typing this:
ip addr show eth0 | grep inet | awk '{ print $2; }' | sed 's/\/.*$//'
#see https://www.digitalocean.com/community/tutorials/how-to-install-nginx-on-centos-7
Raw
install-percona.sh
#see https://www.digitalocean.com/community/tutorials/how-to-install-a-fresh-percona-server-or-replace-mysql
yum install http://www.percona.com/downloads/percona-release/percona-release-0.0-1.x86_64.rpm
yum install Percona-Server-client-56 Percona-Server-server-56
mkdir /etc/my.cnf.d
service mysql start
/usr/bin/mysql_secure_installation
service mysql stop
mv /etc/my.cnf /etc/my.cnf.original
echo "# Generated by Percona Configuration Wizard (http://tools.percona.com/) version REL5-20120208
[mysql]
# CLIENT #
# Configure default options for clients
port = 3306
[mysqld]
# GENERAL #
# Choose user for execution, default storage engine and location of the PID file
user = mysql
default-storage-engine = InnoDB
pid-file = /var/lib/mysql/mysql.pid
# MyISAM #
# Setup MyISAM options with a minimal config, as InnoDB is our default engine
key-buffer-size = 32M
myisam-recover = FORCE,BACKUP
# SAFETY #
# Enforce limits and safety checks
max-allowed-packet = 16M
max-connect-errors = 1000000
innodb = FORCE
# DATA STORAGE #
# Select location for database files
datadir = /var/lib/mysql/
# BINARY LOGGING #
# Enable and setup the binary log
log-bin = /var/lib/mysql/mysql-bin
expire-logs-days = 14
sync-binlog = 1
# CACHES AND LIMITS #
# Configure reasonable default limits throughout Percona Server
tmp-table-size = 32M
max-heap-table-size = 32M
query-cache-type = 0
query-cache-size = 0
max-connections = 500
thread-cache-size = 50
open-files-limit = 65535
table-definition-cache = 1024
table-open-cache = 2048
# INNODB #
# Setup InnoDB/XtraDB engine a 300MB buffer pool and 32MB log file size
innodb-flush-method = O_DIRECT
innodb-log-files-in-group = 2
innodb-log-file-size = 32M
innodb-flush-log-at-trx-commit = 1
innodb-file-per-table = 1
innodb-buffer-pool-size = 300M
# LOGGING #
# Setup log file locations for error log and slow log
# Slow log may be disabled on production setups to prevent extra IO
log-error = /var/lib/mysql/mysql-error.log
log-queries-not-using-indexes = 1
slow-query-log = 1
slow-query-log-file = /var/lib/mysql/mysql-slow.log" >> /etc/my.cnf
service mysql restart
Raw
install-php.sh
sudo yum install php php-fpm
#for apc
sudo yum install php-pear php-devel httpd-devel pcre-devel gcc
pecl install apc
# Arquivo php.ini já deverá estar no servidor.
sudo mv /etc/php.ini /etc/php.ini.orig
sudo mv ./php.ini /etc/php.ini
#sudo sed -i -e 's/memory_limit = 128M/memory_limit = 512M/g' /etc/php.ini
sudo sed -i -e 's/;cgi.fix_pathinfo=1/cgi.fix_pathinfo=0/g' /etc/php.ini
#Arquivo apcu.ini já deverá estar no servidor.
sudo mv /etc/php.d/apcu.ini /etc/php.d/apcu.ini.orig
sudo mv ./apcu.ini /etc/php.d/apcu.ini
sudo sed -i -e 's/user = apache/user = nginx/g' /etc/php-fpm.d/www.conf
sudo sed -i -e 's/group = apache/group = nginx/g' /etc/php-fpm.d/www.conf
sudo sed -i -e 's/;listen.owner = nobody/listen.owner = nobody/g' /etc/php-fpm.d/www.conf
sudo sed -i -e 's/;listen.group = nobody/listen.group = nobody/g' /etc/php-fpm.d/www.conf
sudo systemctl start php-fpm
sudo systemctl enable php-fpm
Raw
install-php56.sh
#see https://webtatic.com/packages/php56/
rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
yum install yum-plugin-replace
yum replace php-common --replace-with=php56w-common
sudo yum install php56w php56w-fpm php56w-common
sudo yum install php56w-mcrypt php56w-gd php56w-xml php56w-xmlrpc php56w-pgsql php56w-pecl-apcu
## Arquivo php.ini já deverá estar no servidor.
sudo mv /etc/php.ini /etc/php.ini.orig
sudo mv ./php.ini /etc/php.ini
#sudo sed -i -e 's/memory_limit = 128M/memory_limit = 512M/g' /etc/php.ini
sudo sed -i -e 's/;cgi.fix_pathinfo=1/cgi.fix_pathinfo=0/g' /etc/php.ini
#Arquivo apcu.ini já deverá estar no servidor.
sudo mv /etc/php.d/apcu.ini /etc/php.d/apcu.ini.orig
sudo mv ./apcu.ini /etc/php.d/apcu.ini
sudo sed -i -e 's/user = apache/user = nginx/g' /etc/php-fpm.d/www.conf
sudo sed -i -e 's/group = apache/group = nginx/g' /etc/php-fpm.d/www.conf
sudo sed -i -e 's/;listen.owner = nobody/listen.owner = nobody/g' /etc/php-fpm.d/www.conf
sudo sed -i -e 's/;listen.group = nobody/listen.group = nobody/g' /etc/php-fpm.d/www.conf
wget http://browscap.org/stream?q=Full_PHP_BrowsCapINI -O browscap.ini
mv ./browscap.ini /etc/
sudo systemctl start php-fpm
sudo systemctl enable php-fpm
Raw
install-postgresql.sh
#Install the postgresql-server package and the "contrib" package, that adds some additional utilities and functionality:
echo "Accept the prompt, by responding with a y."
sudo yum install postgresql-server postgresql-contrib
#Create a new PostgreSQL database cluster:
sudo postgresql-setup initdb
#Open the HBA configuration with your favorite text editor. We will use vi:
sudo sed -i -e 's/ident/md5/g' /var/lib/pgsql/data/pg_hba.conf
#Now start and enable PostgreSQL:
sudo systemctl start postgresql
sudo systemctl enable postgresql
#see https://www.digitalocean.com/community/tutorials/how-to-install-and-use-postgresql-on-centos-7
Raw
install.sh
URL="https://gist.githubusercontent.com/lnoering/6dcd743dab8aa102ba94/raw/"
HASH="bd8887d9b62269784a4ab193e51b4c3915548236"
#arquivos de configuracao
wget "$URL$HASH"/nginx.conf
wget "$URL$HASH"/nginx
wget "$URL$HASH"/php.ini
wget "$URL$HASH"/apcu.ini
wget "$URL$HASH"/magento.conf
wget "$URL$HASH"/pagespeed.conf
#installers
wget "$URL$HASH"/install-nginx.sh
wget "$URL$HASH"/config-pagespeed.sh
wget "$URL$HASH"/install-php56.sh
wget "$URL$HASH"/install-percona.sh
wget "$URL$HASH"/create-db-user-percona.sh
wget "$URL$HASH"/install-magento-conf.sh
sh install-percona.sh
sh create-db-user-percona.sh
sh install-nginx.sh
sh config-pagespeed.sh
sh install-php56.sh
sh install-magento-conf.sh
Raw
magento.conf
server {
listen 80 default_server;
server_name magento.local.com;
root /usr/share/nginx/html;
error_log /var/log/nginx/magento.local.com.error.log;
access_log /var/log/nginx/magento.local.com.access.log;
index index.php index.html;
# Android dupe request bug, https://www.byte.nl/blog/android-bug-can-kill-site-duplicate-requests
set $request_url "$scheme://$http_host$request_uri";
if ($request_url = $http_referer) {
set $request_is_referer 1;
}
if ($http_user_agent ~ 'Android ([23]|4\.[0123])') {
set $android_buggy_ua 1;
}
set $android_dupe_bug "${request_method}${android_buggy_ua}${request_is_referer}";
if ($android_dupe_bug = 'GET11') {
# http://en.wikipedia.org/wiki/List_of_HTTP_status_codes
return 429;
}
# Denied locations require a "^~" to prevent regexes (such as the PHP handler below) from matching
# http://nginx.org/en/docs/http/ngx_http_core_module.html#location
location ^~ /app/ { return 403; }
location ^~ /includes/ { return 403; }
location ^~ /media/downloadable/ { return 403; }
location ^~ /pkginfo/ { return 403; }
location ^~ /report/config.xml { return 403; }
location ^~ /var/ { return 403; }
location ^~ /lib/ { return 403; }
location ^~ /dev/ { return 403; }
location ^~ /RELEASE_NOTES.txt { return 403; }
location ^~ /downloader/pearlib { return 403; }
location ^~ /downloader/template { return 403; }
location ^~ /downloader/Maged { return 403; }
location ~* ^/errors/.+\.xml { return 403; }
# CVE-2015-3428 / AW_Blog vulnerability
# Note the .+ at the start: We want to allow url's like
# order=create_date, which would otherwise match.
if ($arg_order ~* .+(select|create|insert|update|drop|delete|concat|alter|load)) {
return 403;
}
# Don't skip .thumbs, this is a default directory where Magento places thumbnails
# Nginx cannot "not" match something, instead the target is matched with an empty block
# http://stackoverflow.com/a/16304073
location ~ /\.thumbs {
}
# Skip .git, .htpasswd etc
location ~ /\. {
return 404;
}
set $fastcgi_root $document_root;
location / {
try_files $uri $uri/ @handler;
expires 30d;
}
# SUPEE 6285
# Only allow the new url case sensitive lowercase, deny case insensitive
location ^~ /rss/order/new {
echo_exec @handler;
}
location ^~ /rss/catalog/notifystock {
echo_exec @handler;
}
location ^~ /rss/catalog/review {
echo_exec @handler;
}
location ~* /rss/order/new {
return 403;
}
location ~* /rss/catalog/notifystock {
return 403;
}
location ~* /rss/catalog/review {
return 403;
}
## Order IS important! this is required BEFORE the PHP regex
## Allow PHP scripts in skin and JS, but render static 404 pages when skin or js file is missing
## Magento has RewriteCond %{REQUEST_URI} !^/(media|skin|js)/ in default htaccess
location ~ ^/(skin|js)/ {
location ~ \.php$ {
echo_exec @phpfpm;
}
try_files $uri $uri/ =404;
expires 30d;
}
# Disallow PHP scripts in /media/
# Also render static 404 pages for missing media
location ~ ^/media/ {
location ~ \.php$ {
return 403;
}
try_files $uri $uri/ =404;
expires 30d;
}
location @handler {
rewrite / /index.php;
}
location @fastcgi_backend {
# Bot rate limit, https://gist.github.com/supairish/2951524
# Burst=0 (default) --WdG
limit_req zone=bots;
# server_name is read-only, so we need a temp var
set $my_server_name $server_name;
if ($my_server_name = "") {
set $my_server_name $http_host;
}
try_files $uri =404;
expires off;
root $fastcgi_root;
fastcgi_read_timeout 900s;
fastcgi_index index.php;
fastcgi_pass $fastcgi_pass;
include /etc/nginx/fastcgi_params;
fastcgi_param HTTP_AUTHORIZATION $http_authorization;
fastcgi_param SERVER_NAME $my_server_name;
fastcgi_param NGINX_REQUEST_TIME $date_gmt;
# If these variables are unset, set them to an empty value here
# so they are al least defined when fastcgi_param directives are called
if ($storecode = "") {
set $storecode "";
}
if ($storetype = "") {
set $storetype "";
}
# These are set in http.magerunmaps
fastcgi_param MAGE_RUN_CODE $storecode if_not_empty;
fastcgi_param MAGE_RUN_TYPE $storetype if_not_empty;
}
location @phpfpm {
set $log_handler phpfpm;
set $fastcgi_pass 127.0.0.1:9000;
echo_exec @fastcgi_backend;
}
location @hhvm {
set $log_handler hhvm;
set $fastcgi_pass 127.0.0.1:9001;
echo_exec @fastcgi_backend;
}
location ~ .php/ {
rewrite ^(.*.php)/ $1 last;
}
# always execute our own handler for php-fpm, to prevent serving raw php code and to have
# a default when user removes configuration from ~/nginx/
location ~ \.php$ {
echo_exec @phpfpm;
}
rewrite ^/minify/([0-9]+)(/.*.(js|css))$ /lib/minify/m.php?f=$2&d=$1 last;
rewrite ^/skin/m/([0-9]+)(/.*.(js|css))$ /lib/minify/m.php?f=$2&d=$1 last;
location /lib/minify/ { allow all; }
}
Raw
nginx
#!/bin/sh
#
# nginx - this script starts and stops the nginx daemon
#
# chkconfig: - 85 15
# description: NGINX is an HTTP(S) server, HTTP(S) reverse \
# proxy and IMAP/POP3 proxy server
# processname: nginx
# config: /etc/nginx/nginx.conf
# config: /etc/sysconfig/nginx
# pidfile: /var/run/nginx.pid
# file in /etc/init.d/nginx #
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ "$NETWORKING" = "no" ] && exit 0
nginx="/usr/sbin/nginx"
prog=$(basename $nginx)
NGINX_CONF_FILE="/etc/nginx/nginx.conf"
[ -f /etc/sysconfig/nginx ] && . /etc/sysconfig/nginx
lockfile=/var/lock/subsys/nginx
make_dirs() {
# make required directories
user=`$nginx -V 2>&1 | grep "configure arguments:" | sed 's/[^*]*--user=\([^ ]*\).*/\1/g' -`
if [ -z "`grep $user /etc/passwd`" ]; then
useradd -M -s /bin/nologin $user
fi
options=`$nginx -V 2>&1 | grep 'configure arguments:'`
for opt in $options; do
if [ `echo $opt | grep '.*-temp-path'` ]; then
value=`echo $opt | cut -d "=" -f 2`
if [ ! -d "$value" ]; then
# echo "creating" $value
mkdir -p $value && chown -R $user $value
fi
fi
done
}
start() {
[ -x $nginx ] || exit 5
[ -f $NGINX_CONF_FILE ] || exit 6
make_dirs
echo -n $"Starting $prog: "
daemon $nginx -c $NGINX_CONF_FILE
retval=$?
echo
[ $retval -eq 0 ] && touch $lockfile
return $retval
}
stop() {
echo -n $"Stopping $prog: "
killproc $prog -QUIT
retval=$?
echo
[ $retval -eq 0 ] && rm -f $lockfile
return $retval
}
restart() {
configtest || return $?
stop
sleep 1
start
}
reload() {
configtest || return $?
echo -n $"Reloading $prog: "
killproc $nginx -HUP
RETVAL=$?
echo
}
force_reload() {
restart
}
configtest() {
$nginx -t -c $NGINX_CONF_FILE
}
rh_status() {
status $prog
}
rh_status_q() {
rh_status >/dev/null 2>&1
}
case "$1" in
start)
rh_status_q && exit 0
$1
;;
stop)
rh_status_q || exit 0
$1
;;
restart|configtest)
$1
;;
reload)
rh_status_q || exit 7
$1
;;
force-reload)
force_reload
;;
status)
rh_status
;;
condrestart|try-restart)
rh_status_q || exit 0
;;
*)
echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}"
exit 2
esac
Raw
nginx.conf
user nginx;
worker_processes 4;
pid /var/run/nginx.pid;
events {
worker_connections 768;
}
http {
sendfile on;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 65;
types_hash_max_size 2048;
server_tokens off;
server_names_hash_bucket_size 64;
# allows big media uploads
client_max_body_size 120m;
include /etc/nginx/mime.types;
default_type application/octet-stream;
# GeoIP support is included in the Ubuntu 12.04 Nginx.
# This enables logging, and the following:
# if ($geoip_country_code ~ (CN|ZW) ) {
# return 403;
# }
geoip_country /usr/share/GeoIP/GeoIP.dat;
gzip on;
gzip_disable "msie6";
access_log /var/log/nginx/access.log;
error_log /var/log/nginx/error.log;
gzip_min_length 1000;
gzip_proxied any;
gzip_types text/plain application/json application/xml text/css text/js application/x-javascript;
#text/html
# Determine whether a request comes from a human, a search crawler or another bot.
map $http_user_agent $is_non_search_bot {
default '';
~*(google|bing|pingdom|monitis.com|Zend_Http_Client) '';
~*(http|crawler|spider|bot|search|ForusP|Wget/|Python-urllib|PHPCrawl|bGenius) 'bot';
}
# Rate limit bots (that are not search spiders) to one PHP request per second.
# An empty '$limit_bots' would disable rate limiting for this requests
limit_req_zone $is_non_search_bot zone=bots:1m rate=1r/s;
limit_req_log_level error;
include /etc/nginx/conf.d/*.conf;
server {
listen 80;
#listen 80 default_server;
#listen [::]:80 default_server;
server_name _;
root /usr/share/nginx/html;
# Load configuration files for the default server block.
include /etc/nginx/default.d/*.conf;
location / {
}
error_page 404 /404.html;
location = /40x.html {
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
}
}
}
Raw
pagespeed.conf
# Enable PageSpeed
pagespeed on;
pagespeed FileCachePath /var/cache/ngx_pagespeed_cache;
#pagespeed Domain *.example.com;
location ~ "\.pagespeed\.([a-z]\.)?[a-z]{2}\.[^.]{10}\.[^.]+" { add_header "" ""; }
location ~ "^/ngx_pagespeed_static/" { }
location ~ "^/ngx_pagespeed_beacon" { }
#location /ngx_pagespeed_statistics { allow all; }
#location /ngx_pagespeed_global_statistics { allow all; }
#location /ngx_pagespeed_message { allow all; }
#location /pagespeed_console { allow all; }
#location /pagespeed_admin { allow all; }
#pagespeed DownstreamCachePurgeLocationPrefix http://lb1.i;
#pagespeed DownstreamCachePurgeMethod PURGE;
#pagespeed DownstreamCacheRewrittenPercentageThreshold 95;
# PageSpeed should be disabled on the Magento admin (adjust to suit custom admin URLs)
pagespeed Disallow "*/admin/*";
# This setting should be enabled when using HTTPS
# Take care when using HTTP > HTTPS redirection to avoid loops
#pagespeed MapOriginDomain http://www.example.com https://www.example.com;
pagespeed EnableFilters extend_cache;
pagespeed EnableFilters lazyload_images;
pagespeed LazyloadImagesAfterOnload off;
pagespeed LazyloadImagesBlankUrl "https://www.gstatic.com/psa/static/1.gif";
pagespeed EnableFilters rewrite_images;
# This should be tested, or it can produce undesirable results with JS sliders
#pagespeed EnableFilters insert_image_dimensions;
pagespeed EnableFilters collapse_whitespace;
pagespeed EnableFilters remove_comments;
pagespeed EnableFilters move_css_above_scripts;
pagespeed EnableFilters rewrite_css;
pagespeed EnableFilters combine_css;
pagespeed EnableFilters inline_javascript;
pagespeed EnableFilters defer_javascript;
pagespeed EnableFilters combine_javascript;
pagespeed EnableFilters rewrite_javascript;
pagespeed MaxCombinedJsBytes 300000;
pagespeed CombineAcrossPaths on;
Raw
php.ini
[PHP]
;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; PHP's initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP's behavior.
; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server's directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the --with-config-file-path compile time option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://www.php.net/manual/en/configuration.file.php
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://www.php.net/manual/en/ini.sections.php
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can't find an expected
; directive because it is not set or is mistyped, a default value will be used.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
; previously set variable or directive (e.g. ${foo})
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = "None" ; sets foo to the string 'None'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.
; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.
; php.ini-development is very similar to its production variant, except it's
; much more verbose when it comes to errors. We recommending using the
; development version only in development environments as errors shown to
; application users can inadvertently leak otherwise secure information.
; This 2 files are provided, by RPM, in /usr/share/doc/php-common-*/
; File used by RPM (the /etc/php.ini) is mainly the php.ini-production
;;;;;;;;;;;;;;;;;;;
; Quick Reference ;
;;;;;;;;;;;;;;;;;;;
; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP's default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP's behavior.
; allow_call_time_pass_reference
; Default Value: On
; Development Value: Off
; Production Value: Off
; display_errors
; Default Value: On
; Development Value: On
; Production Value: Off
; display_startup_errors
; Default Value: Off
; Development Value: On
; Production Value: Off
; error_reporting
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED
; html_errors
; Default Value: On
; Development Value: On
; Production value: Off
; log_errors
; Default Value: Off
; Development Value: On
; Production Value: On
; magic_quotes_gpc
; Default Value: On
; Development Value: Off
; Production Value: Off
; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off
; register_long_arrays
; Default Value: On
; Development Value: Off
; Production Value: Off
; request_order
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; session.bug_compat_42
; Default Value: On
; Development Value: On
; Production Value: Off
; session.bug_compat_warn
; Default Value: On
; Development Value: On
; Production Value: Off
; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; session.hash_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5
; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off
; track_errors
; Default Value: Off
; Development Value: On
; Production Value: Off
; url_rewriter.tags
; Default Value: "a=href,area=href,frame=src,form=,fieldset="
; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; variables_order
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS"
;;;;;;;;;;;;;;;;;;;;
; php.ini Options ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
;user_ini.filename = ".user.ini"
; To disable this feature set this option to empty value
;user_ini.filename =
; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300
;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;
; Enable the PHP scripting language engine under Apache.
; http://www.php.net/manual/en/apache.configuration.php#ini.engine
engine = On
; This directive determines whether or not PHP will recognize code between
; <? and ?> tags as PHP source which should be processed as such. It's been
; recommended for several years that you not use the short tag "short cut" and
; instead to use the full <?php and ?> tag combination. With the wide spread use
; of XML and use of these tags by other languages, the server can become easily
; confused and end up parsing the wrong code in the wrong context. But because
; this short cut has been a feature for such a long time, it's currently still
; supported for backwards compatibility, but we recommend you don't use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://www.php.net/manual/en/ini.core.php#ini.short-open-tag
short_open_tag = On
; Allow ASP-style <% %> tags.
; http://www.php.net/manual/en/ini.core.php#ini.asp-tags
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
; http://www.php.net/manual/en/ini.core.php#ini.precision
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
; http://www.php.net/manual/en/ini.core.php#ini.y2k-compliance
y2k_compliance = On
; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application's output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you've already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://www.php.net/manual/en/outcontrol.configuration.php#ini.output-buffering
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
; http://www.php.net/manual/en/outcontrol.configuration.php#ini.output-handler
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://www.php.net/manual/en/zlib.configuration.php#ini.zlib.output-compression
zlib.output_compression = Off
; http://www.php.net/manual/en/zlib.configuration.php#ini.zlib.output-compression-level
;zlib.output_compression_level = -1
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://www.php.net/manual/en/zlib.configuration.php#ini.zlib.output-handler
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://www.php.net/manual/en/outcontrol.configuration.php#ini.implicit-flush
implicit_flush = Off
; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; This directive allows you to enable and disable warnings which PHP will issue
; if you pass a value by reference at function call time. Passing values by
; reference at function call time is a deprecated feature which will be removed
; from PHP at some point in the near future. The acceptable method for passing a
; value by reference to a function is by declaring the reference in the functions
; definition, not at call time. This directive does not disable this feature, it
; only determines whether PHP will warn you about it or not. These warnings
; should enabled in development environments only.
; Default Value: On (Suppress warnings)
; Development Value: Off (Issue warnings)
; Production Value: Off (Issue warnings)
; http://www.php.net/manual/en/ini.core.php#ini.allow-call-time-pass-reference
allow_call_time_pass_reference = Off
; Safe Mode
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.safe-mode
safe_mode = Off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.safe-mode-gid
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.safe-mode-include-dir
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.safe-mode-exec-dir
safe_mode_exec_dir =
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.safe-mode-allowed-env-vars
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.safe-mode-protected-env-vars
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.open-basedir
; open_basedir = /home:/tmp:/dev/shm:/usr/share/pear
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.disable-functions
;disable_functions =
disable_functions = "
exec eval proc_close proc_get_status proc_nice proc_open proc_terminate shell_exec system
openlog syslog closelog
apache_child_terminate apache_get_modules apache_get_version apache_getenv
apache_note apache_request_headers apache_reset_timeout apache_note apache_setenv virtual
ini_alter dl pcntl_alarm pcntl_exec pcntl_fork pcntl_setpriority
posix_access posix_kil posix_mkfifo posix_setegid posix_seteuid posix_setgid
posix_setpgid posix_setsid posix_setuid"
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://www.php.net/manual/en/ini.sect.safe-mode.php#ini.disable-classes
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.
; http://www.php.net/manual/en/misc.configuration.php#ini.syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP's default behavior
; is to disable this feature.
; http://www.php.net/manual/en/misc.configuration.php#ini.ignore-user-abort
;ignore_user_abort = On
; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; http://www.php.net/manual/en/ini.core.php#ini.realpath-cache-size
realpath_cache_size = 32k
; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://www.php.net/manual/en/ini.core.php#ini.realpath-cache-ttl
realpath_cache_ttl = 7200
;;;;;;;;;;;;;;;;;
; Miscellaneous ;
;;;;;;;;;;;;;;;;;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; http://www.php.net/manual/en/ini.core.php#ini.expose-php
expose_php = Off
;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;
; Maximum execution time of each script, in seconds
; http://www.php.net/manual/en/info.configuration.php#ini.max-execution-time
max_execution_time = 360
; Maximum amount of time each script may spend parsing request data. It's a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://www.php.net/manual/en/info.configuration.php#ini.max-input-time
max_input_time = 60
; Maximum input variable nesting level
; http://www.php.net/manual/en/info.configuration.php#ini.max-input-nesting-level
;max_input_nesting_level = 64
; Maximum amount of memory a script may consume (128MB)
; http://www.php.net/manual/en/ini.core.php#ini.memory-limit
memory_limit = 512M
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn't be wasting
; resources complaining about best practices and coding standards. That's what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
;
; Error Level Constants:
; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; E_DEPRECATED - warn about code that will not work in future versions
; of PHP
; E_USER_DEPRECATED - user-generated deprecation warnings
;
; Common Values:
; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.error-reporting
;
; WARNING: You can not use these named values outside of PHP, like in httpd.conf or .htaccess.
; See the following URLs for more information:
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.error-reporting
; http://www.php.net/manual/en/errorfunc.constants.php
error_reporting = E_ALL & ~E_NOTICE | E_DEPRECATED
; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; It's recommended that errors be logged on production servers rather than
; having the errors sent to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.display-errors
display_errors = Off
; The display of errors which occur during PHP's startup sequence are handled
; separately from display_errors. PHP's default behavior is to suppress those
; errors from clients. Turning the display of startup errors on can be useful in
; debugging configuration problems. But, it's strongly recommended that you
; leave this setting off on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.display-startup-errors
display_startup_errors = Off
; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.log-errors
log_errors = On
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.log-errors-max-len
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.ignore-repeated-errors
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.ignore-repeated-source
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.report-memleaks
report_memleaks = On
; This setting is on by default.
;report_zend_debug = 0
; Store the last error/warning message in $php_errormsg (boolean). Setting this value
; to On can assist in debugging and is appropriate for development servers. It should
; however be disabled on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.track-errors
track_errors = Off
; Turn off normal error reporting and emit XML-RPC error XML
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.xmlrpc-errors
;xmlrpc_errors = 0
; An XML-RPC faultCode
;xmlrpc_error_number = 0
; When PHP displays or logs an error, it has the capability of inserting html
; links to documentation related to that error. This directive controls whether
; those HTML links appear in error messages or not. For performance and security
; reasons, it's recommended you disable this on production servers.
; Default Value: On
; Development Value: On
; Production value: Off
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.html-errors
html_errors = Off
; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot. PHP's default behavior is to leave these settings empty.
; Note: Never use this feature for production boxes.
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.docref-root
; Examples
;docref_root = "/phpmanual/"
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.docref-ext
;docref_ext = .html
; String to output before an error message. PHP's default behavior is to leave
; this setting blank.
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.error-prepend-string
; Example:
;error_prepend_string = "<font color=#ff0000>"
; String to output after an error message. PHP's default behavior is to leave
; this setting blank.
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.error-append-string
; Example:
;error_append_string = "</font>"
; Log errors to specified file. PHP's default behavior is to leave this value
; empty.
; http://www.php.net/manual/en/errorfunc.configuration.php#ini.error-log
; Example:
;error_log = php_errors.log
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; PHP's default setting is "&".
; http://www.php.net/manual/en/ini.core.php#ini.arg-separator.output
; Example:
;arg_separator.output = "&amp;"
; List of separator(s) used by PHP to parse input URLs into variables.
; PHP's default setting is "&".
; NOTE: Every character in this directive is considered as separator!
; http://www.php.net/manual/en/ini.core.php#ini.arg-separator.input
; Example:
;arg_separator.input = ";&"
; This directive determines which super global arrays are registered when PHP
; starts up. If the register_globals directive is enabled, it also determines
; what order variables are populated into the global space. G,P,C,E & S are
; abbreviations for the following respective super globals: GET, POST, COOKIE,
; ENV and SERVER. There is a performance penalty paid for the registration of
; these arrays and because ENV is not as commonly used as the others, ENV is
; is not recommended on productions servers. You can still get access to
; the environment variables through getenv() should you need to.
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS";
; http://www.php.net/manual/en/ini.core.php#ini.variables-order
variables_order = "GPCS"
; This directive determines which super global data (G,P,C,E & S) should
; be registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive are
; specified in the same manner as the variables_order directive, EXCEPT one.
; Leaving this value empty will cause PHP to use the value set in the
; variables_order directive. It does not mean it will leave the super globals
; array REQUEST empty.
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; http://www.php.net/manual/en/ini.core.php#ini.request-order
request_order = "GP"
; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
; http://www.php.net/manual/en/ini.core.php#ini.register-globals
register_globals = Off
; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
; are registered by PHP or not. As they are deprecated, we obviously don't
; recommend you use them. They are on by default for compatibility reasons but
; they are not recommended on production servers.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://www.php.net/manual/en/ini.core.php#ini.register-long-arrays
register_long_arrays = Off
; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://www.php.net/manual/en/ini.core.php#ini.register-argc-argv
register_argc_argv = Off
; When enabled, the SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
; http://www.php.net/manual/en/ini.core.php#ini.auto-globals-jit
auto_globals_jit = On
; Maximum size of POST data that PHP will accept.
; http://www.php.net/manual/en/ini.core.php#ini.post-max-size
post_max_size = 64M
; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
; escape any character sequences in GET, POST, COOKIE and ENV data which might
; otherwise corrupt data being placed in resources such as databases before
; making that data available to you. Because of character encoding issues and
; non-standard SQL implementations across many databases, it's not currently
; possible for this feature to be 100% accurate. PHP's default behavior is to
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
; scheduled for removal in PHP 6.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://www.php.net/manual/en/info.configuration.php#ini.magic-quotes-gpc
magic_quotes_gpc = Off
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
; http://www.php.net/manual/en/info.configuration.php#ini.magic-quotes-runtime
magic_quotes_runtime = Off
; Use Sybase-style magic quotes (escape ' with '' instead of \').
; http://www.php.net/manual/en/sybase.configuration.php#ini.magic-quotes-sybase
magic_quotes_sybase = Off
; Automatically add files before PHP document.
; http://www.php.net/manual/en/ini.core.php#ini.auto-prepend-file
auto_prepend_file =
; Automatically add files after PHP document.
; http://www.php.net/manual/en/ini.core.php#ini.auto-append-file
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
; http://www.php.net/manual/en/ini.core.php#ini.default-mimetype
default_mimetype = "text/html"
; PHP's default character set is set to empty.
; http://www.php.net/manual/en/ini.core.php#ini.default-charset
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
; to disable this feature.
; http://www.php.net/manual/en/ini.core.php#ini.always-populate-raw-post-data
;always_populate_raw_post_data = On
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
;
; PHP's default setting for include_path is ".;/path/to/php/pear"
; http://www.php.net/manual/en/ini.core.php#ini.include-path
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://www.php.net/manual/en/ini.core.php#ini.doc-root
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
; http://www.php.net/manual/en/ini.core.php#ini.user-dir
user_dir =
; Directory in which the loadable extensions (modules) reside.
; http://www.php.net/manual/en/ini.core.php#ini.extension-dir
; extension_dir = "./"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://www.php.net/manual/en/info.configuration.php#ini.enable-dl
enable_dl = Off
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://www.php.net/manual/en/ini.core.php#ini.cgi.force-redirect
;cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP's default behavior is to disable this feature.
;cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://www.php.net/manual/en/ini.core.php#ini.cgi.redirect-status-env
;cgi.redirect_status_env = ;
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://www.php.net/manual/en/ini.core.php#ini.cgi.fix-pathinfo
;cgi.fix_pathinfo=1
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://www.php.net/manual/en/ini.core.php#ini.fastcgi.impersonate
;fastcgi.impersonate = 1;
; Disable logging through FastCGI connection. PHP's default behavior is to enable
; this feature.
;fastcgi.logging = 0
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://www.php.net/manual/en/ini.core.php#ini.cgi.rfc2616-headers
;cgi.rfc2616_headers = 0
;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;
; Whether to allow HTTP file uploads.
; http://www.php.net/manual/en/ini.core.php#ini.file-uploads
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://www.php.net/manual/en/ini.core.php#ini.upload-tmp-dir
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
; http://www.php.net/manual/en/ini.core.php#ini.upload-max-filesize
upload_max_filesize = 64M
;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; http://www.php.net/manual/en/filesystem.configuration.php#ini.allow-url-fopen
allow_url_fopen = Off
; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
; http://www.php.net/manual/en/filesystem.configuration.php#ini.allow-url-include
allow_url_include = Off
; Define the anonymous ftp password (your email address). PHP's default setting
; for this is empty.
; http://www.php.net/manual/en/filesystem.configuration.php#ini.from
;from="john@doe.com"
; Define the User-Agent string. PHP's default setting for this is empty.
; http://www.php.net/manual/en/filesystem.configuration.php#ini.user-agent
;user_agent="PHP"
; Default timeout for socket based streams (seconds)
; http://www.php.net/manual/en/filesystem.configuration.php#ini.default-socket-timeout
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://www.php.net/manual/en/filesystem.configuration.php#ini.auto-detect-line-endings
;auto_detect_line_endings = Off
;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example
;
; extension=msql.so
;
; ... or with a path:
;
; extension=/path/to/extension/msql.so
;
; If you only provide the name of the extension, PHP will look for it in its
; default extension directory.
;;;;
; Note: packaged extension modules are now loaded via the .ini files
; found in the directory /etc/php.d; these are loaded by default.
;;;;
;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;
[Date]
; Defines the default timezone used by the date functions
; http://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone
date.timezone = "America/Detroit"
; http://www.php.net/manual/en/datetime.configuration.php#ini.date.default-latitude
;date.default_latitude = 31.7667
; http://www.php.net/manual/en/datetime.configuration.php#ini.date.default-longitude
;date.default_longitude = 35.2333
; http://www.php.net/manual/en/datetime.configuration.php#ini.date.sunrise-zenith
;date.sunrise_zenith = 90.583333
; http://www.php.net/manual/en/datetime.configuration.php#ini.date.sunset-zenith
;date.sunset_zenith = 90.583333
[filter]
; http://www.php.net/manual/en/filter.configuration.php#ini.filter.default
;filter.default = unsafe_raw
; http://www.php.net/manual/en/filter.configuration.php#ini.filter.default-flags
;filter.default_flags =
[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1
[intl]
;intl.default_locale =
[sqlite]
; http://www.php.net/manual/en/sqlite.configuration.php#ini.sqlite.assoc-case
;sqlite.assoc_case = 0
[sqlite3]
;sqlite3.extension_dir =
[Pcre]
;PCRE library backtracking limit.
; http://www.php.net/manual/en/pcre.configuration.php#ini.pcre.backtrack-limit
;pcre.backtrack_limit=100000
;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
; http://www.php.net/manual/en/pcre.configuration.php#ini.pcre.recursion-limit
;pcre.recursion_limit=100000
[Pdo]
; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
; http://www.php.net/manual/en/ref.pdo-odbc.php#ini.pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict
[Phar]
; http://www.php.net/manual/en/phar.configuration.php#ini.phar.readonly
;phar.readonly = On
; http://www.php.net/manual/en/phar.configuration.php#ini.phar.require-hash
;phar.require_hash = On
;phar.cache_list =
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
; http://www.php.net/manual/en/network.configuration.php#ini.define-syslog-variables
define_syslog_variables = Off
[mail function]
; For Win32 only.
; http://www.php.net/manual/en/mail.configuration.php#ini.smtp
SMTP = localhost
; http://www.php.net/manual/en/mail.configuration.php#ini.smtp-port
smtp_port = 25
; For Win32 only.
; http://www.php.net/manual/en/mail.configuration.php#ini.sendmail-from
;sendmail_from = me@example.com
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; http://www.php.net/manual/en/mail.configuration.php#ini.sendmail-path
sendmail_path = /usr/sbin/sendmail -t -i
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
; Add X-PHP-Originaiting-Script: that will include uid of the script followed by the filename
mail.add_x_header = On
; Log all mail() calls including the full path of the script, line #, to address and headers
;mail.log =
[SQL]
; http://www.php.net/manual/en/ini.core.php#ini.sql.safe-mode
sql.safe_mode = Off
[ODBC]
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.default-db
;odbc.default_db = Not yet implemented
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.default-user
;odbc.default_user = Not yet implemented
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.default-pw
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.allow-persistent
odbc.allow_persistent = Off
; Check that a connection is still valid before reuse.
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.check-persistent
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.max-persistent
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.max-links
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.defaultlrl
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
; http://www.php.net/manual/en/odbc.configuration.php#ini.uodbc.defaultbinmode
odbc.defaultbinmode = 1
;birdstep.max_links = -1
[MySQL]
; Allow or prevent persistent links.
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.allow-persistent
mysql.allow_persistent = Off
; Maximum number of persistent links. -1 means no limit.
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.max-persistent
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.max-links
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.default-port
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.default-socket
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.default-host
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.default-user
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.default-password
mysql.default_password =
; Maximum time (in seconds) for connect timeout. -1 means no limit
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.connect-timeout
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
; http://www.php.net/manual/en/mysql.configuration.php#ini.mysql.trace-mode
mysql.trace_mode = Off
[MySQLi]
; Maximum number of links. -1 means no limit.
; http://www.php.net/manual/en/mysqli.configuration.php#ini.mysqli.max-links
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://www.php.net/manual/en/mysqli.configuration.php#ini.mysqli.default-port
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://www.php.net/manual/en/mysqli.configuration.php#ini.mysqli.default-socket
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
; http://www.php.net/manual/en/mysqli.configuration.php#ini.mysqli.default-host
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
; http://www.php.net/manual/en/mysqli.configuration.php#ini.mysqli.default-user
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://www.php.net/manual/en/mysqli.configuration.php#ini.mysqli.default-pw
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[PostgresSQL]
; Allow or prevent persistent links.
; http://www.php.net/manual/en/pgsql.configuration.php#ini.pgsql.allow-persistent
pgsql.allow_persistent = Off
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://www.php.net/manual/en/pgsql.configuration.php#ini.pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
; http://www.php.net/manual/en/pgsql.configuration.php#ini.pgsql.max-persistent
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
; http://www.php.net/manual/en/pgsql.configuration.php#ini.pgsql.max-links
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://www.php.net/manual/en/pgsql.configuration.php#ini.pgsql.ignore-notice
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://www.php.net/manual/en/pgsql.configuration.php#ini.pgsql.log-notice
pgsql.log_notice = 0
[Sybase-CT]
; Allow or prevent persistent links.
; http://www.php.net/manual/en/sybase.configuration.php#ini.sybct.allow-persistent
sybct.allow_persistent = Off
; Maximum number of persistent links. -1 means no limit.
; http://www.php.net/manual/en/sybase.configuration.php#ini.sybct.max-persistent
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://www.php.net/manual/en/sybase.configuration.php#ini.sybct.max-links
sybct.max_links = -1
; Minimum server message severity to display.
; http://www.php.net/manual/en/sybase.configuration.php#ini.sybct.min-server-severity
sybct.min_server_severity = 10
; Minimum client message severity to display.
; http://www.php.net/manual/en/sybase.configuration.php#ini.sybct.min-client-severity
sybct.min_client_severity = 10
; Set per-context timeout
; http://www.php.net/manual/en/sybase.configuration.php#ini.sybct.timeout
;sybct.timeout=
;sybct.packet_size
[bcmath]
; Number of decimal digits for all bcmath functions.
; http://www.php.net/manual/en/bc.configuration.php#ini.bcmath.scale
bcmath.scale = 0
[browscap]
; http://www.php.net/manual/en/misc.configuration.php#ini.browscap
browscap = /etc/browscap.ini
[Session]
; Handler used to store/retrieve data.
; http://www.php.net/manual/en/session.configuration.php#ini.session.save-handler
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; As of PHP 4.0.1, you can define the path as:
;
; session.save_path = "N;/path"
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
; http://www.php.net/manual/en/session.configuration.php#ini.session.save-path
session.save_path = /home/tmp
; Whether to use cookies.
; http://www.php.net/manual/en/session.configuration.php#ini.session.use-cookies
session.use_cookies = 1
; http://www.php.net/manual/en/session.configuration.php#ini.session.cookie-secure
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it's very helpful in combatting
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://www.php.net/manual/en/session.configuration.php#ini.session.use-only-cookies
session.use_only_cookies = 1
; Name of the session (used as cookie name).
; http://www.php.net/manual/en/session.configuration.php#ini.session.name
session.name = PHPSESSID
; Initialize session on request startup.
; http://www.php.net/manual/en/session.configuration.php#ini.session.auto-start
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://www.php.net/manual/en/session.configuration.php#ini.session.cookie-lifetime
session.cookie_lifetime = 0
; The path for which the cookie is valid.
; http://www.php.net/manual/en/session.configuration.php#ini.session.cookie-path
session.cookie_path = /
; The domain for which the cookie is valid.
; http://www.php.net/manual/en/session.configuration.php#ini.session.cookie-domain
session.cookie_domain =
; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
; http://www.php.net/manual/en/session.configuration.php#ini.session.cookie-httponly
session.cookie_httponly =
; Handler used to serialize data. php is the standard serializer of PHP.
; http://www.php.net/manual/en/session.configuration.php#ini.session.serialize-handler
session.serialize_handler = php
; Defines the probability that the 'garbage collection' process is started
; on every session initialization. The probability is calculated by using
; gc_probability/gc_divisor. Where session.gc_probability is the numerator
; and gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://www.php.net/manual/en/session.configuration.php#ini.session.gc-probability
session.gc_probability = 1
; Defines the probability that the 'garbage collection' process is started on every
; session initialization. The probability is calculated by using the following equation:
; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
; session.gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request. Increasing this value to 1000 will give you
; a 0.1% chance the gc will run on any give request. For high volume production servers,
; this is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://www.php.net/manual/en/session.configuration.php#ini.session.gc-divisor
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
; http://www.php.net/manual/en/session.configuration.php#ini.session.gc-maxlifetime
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, even when register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled. This feature
; introduces some serious security problems if not handled correctly. It's
; recommended that you do not use this feature on production servers. But you
; should enable this on development servers and enable the warning as well. If you
; do not enable the feature on development servers, you won't be warned when it's
; used and debugging errors caused by this can be difficult to track down.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://www.php.net/manual/en/session.configuration.php#ini.session.bug-compat-42
session.bug_compat_42 = Off
; This setting controls whether or not you are warned by PHP when initializing a
; session value into the global space. session.bug_compat_42 must be enabled before
; these warnings can be issued by PHP. See the directive above for more information.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://www.php.net/manual/en/session.configuration.php#ini.session.bug-compat-warn
session.bug_compat_warn = Off
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://www.php.net/manual/en/session.configuration.php#ini.session.referer-check
session.referer_check =
; How many bytes to read from the file.
; http://www.php.net/manual/en/session.configuration.php#ini.session.entropy-length
session.entropy_length = 0
; Specified here to create the session id.
; http://www.php.net/manual/en/session.configuration.php#ini.session.entropy-file
;session.entropy_file = /dev/urandom
session.entropy_file =
; http://www.php.net/manual/en/session.configuration.php#ini.session.entropy-length
;session.entropy_length = 16
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://www.php.net/manual/en/session.configuration.php#ini.session.cache-limiter
session.cache_limiter = nocache
; Document expires after n minutes.
; http://www.php.net/manual/en/session.configuration.php#ini.session.cache-expire
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://www.php.net/manual/en/session.configuration.php#ini.session.use-trans-sid
session.use_trans_sid = 0
; Select a hash function for use in generating session ids.
; Possible Values
; 0 (MD5 128 bits)
; 1 (SHA-1 160 bits)
; http://www.php.net/manual/en/session.configuration.php#ini.session.hash-function
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://www.php.net/manual/en/session.configuration.php#ini.session.hash-bits-per-character
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
; Default Value: "a=href,area=href,frame=src,form=,fieldset="
; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; http://www.php.net/manual/en/session.configuration.php#ini.url-rewriter.tags
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = Off
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1
; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"
[Assertion]
; Assert(expr); active by default.
; http://www.php.net/manual/en/info.configuration.php#ini.assert.active
;assert.active = On
; Issue a PHP warning for each failed assertion.
; http://www.php.net/manual/en/info.configuration.php#ini.assert.warning
;assert.warning = On
; Don't bail out by default.
; http://www.php.net/manual/en/info.configuration.php#ini.assert.bail
;assert.bail = Off
; User-function to be called if an assertion fails.
; http://www.php.net/manual/en/info.configuration.php#ini.assert.callback
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
; http://www.php.net/manual/en/info.configuration.php#ini.assert.quiet-eval
;assert.quiet_eval = 0
[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
; http://www.php.net/manual/en/com.configuration.php#ini.com.typelib-file
;com.typelib_file =
; allow Distributed-COM calls
; http://www.php.net/manual/en/com.configuration.php#ini.com.allow-dcom
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
; http://www.php.net/manual/en/com.configuration.php#ini.com.autoregister-typelib
;com.autoregister_typelib = true
; register constants casesensitive
; http://www.php.net/manual/en/com.configuration.php#ini.com.autoregister-casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
; http://www.php.net/manual/en/com.configuration.php#ini.com.autoregister-verbose
;com.autoregister_verbose = true
[mbstring]
; language for internal character representation.
; http://www.php.net/manual/en/mbstring.configuration.php#ini.mbstring.language
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
; http://www.php.net/manual/en/mbstring.configuration.php#ini.mbstring.internal-encoding
;mbstring.internal_encoding = EUC-JP
; http input encoding.
; http://www.php.net/manual/en/mbstring.configuration.php#ini.mbstring.http-input
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
; http://www.php.net/manual/en/mbstring.configuration.php#ini.mbstring.http-output
;mbstring.http_output = SJIS
; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
; http://www.php.net/manual/en/mbstring.configuration.php#ini.mbstring.encoding-translation
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
; http://www.php.net/manual/en/mbstring.configuration.php#ini.mbstring.detect-order
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
; http://www.php.net/manual/en/mbstring.configuration.php#ini.mbstring.substitute-character
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
; http://www.php.net/manual/en/mbstring.configuration.php#ini.mbstring.func-overload
;mbstring.func_overload = 0
; enable strict encoding detection.
;mbstring.strict_detection = Off
; This directive specifies the regex pattern of content types for which mb_output_handler()
; is activated.
; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
;mbstring.http_output_conv_mimetype=
[gd]
; Tell the jpeg decode to ignore warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
; http://www.php.net/manual/en/image.configuration.php#ini.image.jpeg-ignore-warning
;gd.jpeg_ignore_warning = 0
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
; http://www.php.net/manual/en/exif.configuration.php#ini.exif.encode-unicode
;exif.encode_unicode = ISO-8859-15
; http://www.php.net/manual/en/exif.configuration.php#ini.exif.decode-unicode-motorola
;exif.decode_unicode_motorola = UCS-2BE
; http://www.php.net/manual/en/exif.configuration.php#ini.exif.decode-unicode-intel
;exif.decode_unicode_intel = UCS-2LE
; http://www.php.net/manual/en/exif.configuration.php#ini.exif.encode-jis
;exif.encode_jis =
; http://www.php.net/manual/en/exif.configuration.php#ini.exif.decode-jis-motorola
;exif.decode_jis_motorola = JIS
; http://www.php.net/manual/en/exif.configuration.php#ini.exif.decode-jis-intel
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
; http://www.php.net/manual/en/tidy.configuration.php#ini.tidy.default-config
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
; http://www.php.net/manual/en/tidy.configuration.php#ini.tidy.clean-output
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
; http://www.php.net/manual/en/soap.configuration.php#ini.soap.wsdl-cache-enabled
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
; http://www.php.net/manual/en/soap.configuration.php#ini.soap.wsdl-cache-dir
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
; http://www.php.net/manual/en/soap.configuration.php#ini.soap.wsdl-cache-ttl
soap.wsdl_cache_ttl=86400
[sysvshm]
; A default size of the shared memory segment
;sysvshm.init_mem = 10000
; Local Variables:
; tab-width: 4
; End:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment