diff.boot

5c5
< Linux version 4.4.0-rc5-sunxi (root@olympus) (gcc version 5.2.1 20151028 (Debian 5.2.1-23) ) #3 SMP Tue Dec 15 20:59:11 AEDT 2015
---
> Linux version 4.2.3 (lod@olympus) (gcc version 5.2.1 20151028 (Debian 5.2.1-23) ) #4 SMP Tue Dec 15 22:17:59 AEDT 2015
8,9c8
< Machine model: Banana Pi BPI-M1
< cma: Reserved 16 MiB at 0x7e800000
---
> Machine model: LeMaker Banana Pi
12,13c11,12
< free_area_init_node: node 0, pgdat c0a97c00, node_mem_map ef701000
<   Normal zone: 1728 pages used for memmap
---
> free_area_init_node: node 0, pgdat c0a320c0, node_mem_map eef01000
>   Normal zone: 1710 pages used for memmap
15,16c14,15
<   Normal zone: 196608 pages, LIFO batch:31
<   HighMem zone: 63511 pages, LIFO batch:15
---
>   Normal zone: 194560 pages, LIFO batch:31
>   HighMem zone: 65559 pages, LIFO batch:15
19,20c18,19
< PERCPU: Embedded 12 pages/cpu @ef6ce000 s19008 r8192 d21952 u49152
< pcpu-alloc: s19008 r8192 d21952 u49152 alloc=12*4096
---
> PERCPU: Embedded 11 pages/cpu @eeed2000 s15424 r8192 d21440 u45056
> pcpu-alloc: s15424 r8192 d21440 u45056 alloc=11*4096
22c21
< Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258391
---
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258409
27c26
< Memory: 1002704K/1040476K available (8056K kernel code, 354K rwdata, 2044K rodata, 360K init, 313K bss, 21388K reserved, 16384K cma-reserved, 237660K highmem)
---
> Memory: 1019532K/1040476K available (7767K kernel code, 339K rwdata, 1984K rodata, 316K init, 298K bss, 20944K reserved, 0K cma-reserved, 262236K highmem)
31,32c30,31
<     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
<     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
---
>     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
>     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
35,38c34,37
<       .text : 0xc0008000 - 0xc09e540c   (10102 kB)
<       .init : 0xc09e6000 - 0xc0a40000   ( 360 kB)
<       .data : 0xc0a40000 - 0xc0a98bc0   ( 355 kB)
<        .bss : 0xc0a9b000 - 0xc0ae9460   ( 314 kB)
---
>       .text : 0xc0008000 - 0xc098e0c8   (9753 kB)
>       .init : 0xc098f000 - 0xc09de000   ( 316 kB)
>       .data : 0xc09de000 - 0xc0a32e20   ( 340 kB)
>        .bss : 0xc0a35000 - 0xc0a7fb88   ( 299 kB)
56c55
< Initializing cgroup subsys io
---
> Initializing cgroup subsys blkio
76,79c75,78
<    arm4regs  :  1142.800 MB/sec
<    8regs     :   794.000 MB/sec
<    32regs    :   792.400 MB/sec
< xor: using function: arm4regs (1142.800 MB/sec)
---
>    arm4regs  :  1158.000 MB/sec
>    8regs     :   801.200 MB/sec
>    32regs    :   799.600 MB/sec
> xor: using function: arm4regs (1158.000 MB/sec)
88,89c87,88
< raid6: int32x1  xor()   104 MB/s
< raid6: int32x2  gen()   177 MB/s
---
> raid6: int32x1  xor()   105 MB/s
> raid6: int32x2  gen()   176 MB/s
95c94
< raid6: using algorithm int32x2 gen() 177 MB/s
---
> raid6: using algorithm int32x2 gen() 176 MB/s
98d96
< reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
113c111
< simple-framebuffer 7f817000.framebuffer: framebuffer at 0x7f817000, 0x7e9000 bytes, mapped to 0xf0900000
---
> simple-framebuffer 7f817000.framebuffer: framebuffer at 0x7f817000, 0x7e9000 bytes, mapped to 0xf0800000
127a126
> hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
136c135
< JFS: nTxBlock = 7961, nTxLock = 63693
---
> JFS: nTxBlock = 7965, nTxLock = 63720
146c145
< 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A
---
> 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A
148,149c147,148
< 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 44, base_baud = 1500000) is a U6_16550A
< 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 45, base_baud = 1500000) is a U6_16550A
---
> 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 42, base_baud = 1500000) is a U6_16550A
> 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 43, base_baud = 1500000) is a U6_16550A
157c156
< ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 32
---
> ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 30
177a177
> axp20x-regulator axp20x-regulator: regulators node not found
191c191
< sunxi-mmc 1c0f000.mmc: base:0xf08ca000 irq:27
---
> sunxi-mmc 1c0f000.mmc: base:0xf0560000 irq:27
193,196d192
< sun4i-ss 1c15000.crypto-engine: no reset control found
< sun4i-ss 1c15000.crypto-engine: Die ID 0
< sun4i-ss 1c15000.crypto-engine: Fail to register md5
< sun4i-ss: probe of 1c15000.crypto-engine failed with error -22
205,211d200
< mmc0: host does not support reading read-only switch, assuming write-enable
< mmc0: new high speed SDHC card at address aaaa
< mmcblk0: mmc0:aaaa SS08G 7.40 GiB 
<  mmcblk0: p1 p2
< can: controller area network core (rev 20120528 abi 9)
< ata1: SATA link down (SStatus 0 SControl 300)
< NET: Registered protocol family 29
217,218c206
< zswap: default zpool zbud not available
< zswap: pool creation failed
---
> ata1: SATA link down (SStatus 0 SControl 300)
219a208,211
> mmc0: host does not support reading read-only switch, assuming write-enable
> mmc0: new high speed SDHC card at address aaaa
> mmcblk0: mmc0:aaaa SS08G 7.40 GiB 
>  mmcblk0: p1 p2
220a213,254
> ehci-platform 1c14000.usb: EHCI Host Controller
> ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
> ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
> ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 4.2.3 ehci_hcd
> usb usb1: SerialNumber: 1c14000.usb
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 1 port detected
> ehci-platform 1c1c000.usb: EHCI Host Controller
> ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
> ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
> ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 4.2.3 ehci_hcd
> usb usb2: SerialNumber: 1c1c000.usb
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 1 port detected
> ohci-platform 1c14400.usb: Generic Platform OHCI controller
> ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
> ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: Generic Platform OHCI controller
> usb usb3: Manufacturer: Linux 4.2.3 ohci_hcd
> usb usb3: SerialNumber: 1c14400.usb
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 1 port detected
> ohci-platform 1c1c400.usb: Generic Platform OHCI controller
> ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
> ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: Generic Platform OHCI controller
> usb usb4: Manufacturer: Linux 4.2.3 ohci_hcd
> usb usb4: SerialNumber: 1c1c400.usb
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 1 port detected
222,228d255
< vcc3v0: disabling
< vcc5v0: disabling
< ldo3: disabling
< ldo4: disabling
< usb0-vbus: disabling
< usb1-vbus: disabling
< usb2-vbus: disabling
229a257,258
> vcc5v0: disabling
> vcc3v0: disabling
235c264
< Freeing unused kernel memory: 360K (c09e6000 - c0a40000)
---
> Freeing unused kernel memory: 316K (c098f000 - c09de000)