Skip to content

Instantly share code, notes, and snippets.

@lolmaus
Created January 9, 2020 15:52
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save lolmaus/5213a62d3aa18d475eafd40f28f6c1f3 to your computer and use it in GitHub Desktop.
Save lolmaus/5213a62d3aa18d475eafd40f28f6c1f3 to your computer and use it in GitHub Desktop.
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13
[ 0.000000] Linux version 5.3.0-24-generic (buildd@lgw01-amd64-017) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #26~18.04.2-Ubuntu SMP Tue Nov 26 12:34:22 UTC 2019 (Ubuntu 5.3.0-24.26~18.04.2-generic 5.3.10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-24-generic root=UUID=20f75750-792a-4f45-9f4b-fbaa77c32fb7 ro elevator=deadline quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d0329fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d032a000-0x00000000d052bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d052c000-0x00000000d6a0afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d6a0b000-0x00000000d6c0afff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000d6c0b000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by Lenovo
[ 0.000000] efi: ACPI 2.0=0xdaffe014 ACPI=0xdaffe000 SMBIOS=0xdae9e000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23444AG/23444AG, BIOS G1ET91WW (2.51 ) 01/09/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.324 MHz processor
[ 0.000273] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000275] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000281] last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[ 0.000285] MTRR default type: uncachable
[ 0.000285] MTRR fixed ranges enabled:
[ 0.000287] 00000-9FFFF write-back
[ 0.000287] A0000-FFFFF uncachable
[ 0.000288] MTRR variable ranges enabled:
[ 0.000289] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000290] 1 base 000000000 mask F80000000 write-back
[ 0.000291] 2 base 080000000 mask FC0000000 write-back
[ 0.000292] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000292] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000293] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000294] 6 base 100000000 mask F00000000 write-back
[ 0.000294] 7 base 200000000 mask E00000000 write-back
[ 0.000295] 8 base 400000000 mask FE0000000 write-back
[ 0.000296] 9 base 41F000000 mask FFF000000 uncachable
[ 0.000732] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000915] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.017018] check: Scanning 1 areas for low memory corruption
[ 0.017024] BRK [0x240801000, 0x240801fff] PGTABLE
[ 0.017026] BRK [0x240802000, 0x240802fff] PGTABLE
[ 0.017027] BRK [0x240803000, 0x240803fff] PGTABLE
[ 0.017066] BRK [0x240804000, 0x240804fff] PGTABLE
[ 0.017068] BRK [0x240805000, 0x240805fff] PGTABLE
[ 0.017149] BRK [0x240806000, 0x240806fff] PGTABLE
[ 0.017252] BRK [0x240807000, 0x240807fff] PGTABLE
[ 0.017253] BRK [0x240808000, 0x240808fff] PGTABLE
[ 0.017340] BRK [0x240809000, 0x240809fff] PGTABLE
[ 0.017351] BRK [0x24080a000, 0x24080afff] PGTABLE
[ 0.017395] BRK [0x24080b000, 0x24080bfff] PGTABLE
[ 0.017459] BRK [0x24080c000, 0x24080cfff] PGTABLE
[ 0.017820] RAMDISK: [mem 0x2fc71000-0x33e2ffff]
[ 0.017831] ACPI: Early table checksum verification disabled
[ 0.017834] ACPI: RSDP 0x00000000DAFFE014 000024 (v02 LENOVO)
[ 0.017837] ACPI: XSDT 0x00000000DAFFE170 0000CC (v01 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017842] ACPI: FACP 0x00000000DAFE7000 00010C (v05 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017847] ACPI: DSDT 0x00000000DAFE9000 00FE86 (v01 LENOVO TP-G1 00002510 INTL 20061109)
[ 0.017850] ACPI: FACS 0x00000000DAF5A000 000040
[ 0.017853] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G1 00002510 PTL 00000001)
[ 0.017855] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.017858] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.017860] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.017863] ACPI: SSDT 0x00000000DAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.017865] ACPI: HPET 0x00000000DAFE5000 000038 (v01 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017868] ACPI: APIC 0x00000000DAFE4000 000098 (v01 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017870] ACPI: MCFG 0x00000000DAFE3000 00003C (v01 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017873] ACPI: ECDT 0x00000000DAFE2000 000052 (v01 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017875] ACPI: FPDT 0x00000000DAFE1000 000064 (v01 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017878] ACPI: ASF! 0x00000000DAFE8000 0000A5 (v32 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017880] ACPI: UEFI 0x00000000DAFE0000 00003E (v01 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017883] ACPI: UEFI 0x00000000DAFDF000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.017885] ACPI: POAT 0x00000000DAFDE000 000055 (v03 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017888] ACPI: SSDT 0x00000000DAFDD000 000C51 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.017890] ACPI: SSDT 0x00000000DAFDC000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.017893] ACPI: DMAR 0x00000000DAFDB000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.017895] ACPI: UEFI 0x00000000DAFDA000 0002A6 (v01 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017898] ACPI: DBG2 0x00000000DAFD9000 0000E9 (v00 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017900] ACPI: BGRT 0x00000000DAFD8000 000038 (v00 LENOVO TP-G1 00002510 PTL 00000002)
[ 0.017907] ACPI: DMI detected: Lenovo ThinkPad T430
[ 0.017910] ACPI: Local APIC address 0xfee00000
[ 0.017991] No NUMA configuration found
[ 0.017992] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[ 0.018001] NODE_DATA(0) allocated [mem 0x41e5c8000-0x41e5f2fff]
[ 0.018257] Zone ranges:
[ 0.018258] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018259] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.018260] Normal [mem 0x0000000100000000-0x000000041e5fffff]
[ 0.018261] Device empty
[ 0.018261] Movable zone start for each node
[ 0.018264] Early memory node ranges
[ 0.018265] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.018266] node 0: [mem 0x000000000009d000-0x000000000009dfff]
[ 0.018266] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.018267] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.018267] node 0: [mem 0x0000000040005000-0x00000000d0329fff]
[ 0.018268] node 0: [mem 0x00000000d052c000-0x00000000d6a0afff]
[ 0.018269] node 0: [mem 0x00000000dafff000-0x00000000daffffff]
[ 0.018269] node 0: [mem 0x0000000100000000-0x000000041e5fffff]
[ 0.018595] Zeroed struct page in unavailable ranges: 39515 pages
[ 0.018596] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
[ 0.018597] On node 0 totalpages: 4148133
[ 0.018598] DMA zone: 64 pages used for memmap
[ 0.018599] DMA zone: 24 pages reserved
[ 0.018599] DMA zone: 3996 pages, LIFO batch:0
[ 0.018649] DMA32 zone: 13657 pages used for memmap
[ 0.018649] DMA32 zone: 873993 pages, LIFO batch:63
[ 0.029998] Normal zone: 51096 pages used for memmap
[ 0.029999] Normal zone: 3270144 pages, LIFO batch:63
[ 0.067104] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.067410] ACPI: PM-Timer IO Port: 0x408
[ 0.067413] ACPI: Local APIC address 0xfee00000
[ 0.067420] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.067421] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.067434] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.067436] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.067437] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.067439] ACPI: IRQ0 used by override.
[ 0.067439] ACPI: IRQ9 used by override.
[ 0.067441] Using ACPI (MADT) for SMP configuration information
[ 0.067443] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.067446] efi_bgrt: Ignoring BGRT: invalid version 0 (expected 1)
[ 0.067449] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.067468] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.067470] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.067471] PM: Registered nosave memory: [mem 0x0009e000-0x000bffff]
[ 0.067472] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.067473] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.067474] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.067476] PM: Registered nosave memory: [mem 0xd032a000-0xd052bfff]
[ 0.067477] PM: Registered nosave memory: [mem 0xd6a0b000-0xd6c0afff]
[ 0.067478] PM: Registered nosave memory: [mem 0xd6c0b000-0xdae9efff]
[ 0.067478] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[ 0.067479] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.067480] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ 0.067481] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
[ 0.067481] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[ 0.067481] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[ 0.067482] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.067482] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[ 0.067484] [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[ 0.067485] Booting paravirtualized kernel on bare hardware
[ 0.067488] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.067495] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.067737] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.067743] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.067744] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.067773] Built 1 zonelists, mobility grouping on. Total pages: 4083292
[ 0.067773] Policy zone: Normal
[ 0.067775] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-24-generic root=UUID=20f75750-792a-4f45-9f4b-fbaa77c32fb7 ro elevator=deadline quiet splash vt.handoff=1
[ 0.068752] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.069194] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.069279] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.072815] Calgary: detecting Calgary via BIOS EBDA area
[ 0.072816] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.115103] Memory: 16067752K/16592532K available (14339K kernel code, 2370K rwdata, 4684K rodata, 2660K init, 5076K bss, 524780K reserved, 0K cma-reserved)
[ 0.115229] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.115240] Kernel/User page tables isolation: enabled
[ 0.115255] ftrace: allocating 42917 entries in 168 pages
[ 0.130364] rcu: Hierarchical RCU implementation.
[ 0.130366] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.130366] Tasks RCU enabled.
[ 0.130367] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.130368] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.133271] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.133496] random: crng done (trusting CPU's manufacturer)
[ 0.133520] vt handoff: transparent VT on vt#1
[ 0.133525] Console: colour dummy device 80x25
[ 0.133528] printk: console [tty0] enabled
[ 0.133542] ACPI: Core revision 20190703
[ 0.133694] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.133709] APIC: Switch to symmetric I/O mode setup
[ 0.133710] DMAR: Host address width 36
[ 0.133711] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.133716] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.133716] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.133719] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.133719] DMAR: RMRR base: 0x000000da475000 end: 0x000000da48bfff
[ 0.133720] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.133722] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.133722] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.133723] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.134139] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.134140] x2apic enabled
[ 0.134147] Switched APIC routing to cluster x2apic.
[ 0.134574] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.153713] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b4a0643c5, max_idle_ns: 440795288308 ns
[ 0.153717] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.64 BogoMIPS (lpj=11573296)
[ 0.153719] pid_max: default: 32768 minimum: 301
[ 0.163509] LSM: Security Framework initializing
[ 0.163518] Yama: becoming mindful.
[ 0.163557] AppArmor: AppArmor initialized
[ 0.163611] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.163636] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.163792] *** VALIDATE proc ***
[ 0.163840] *** VALIDATE cgroup1 ***
[ 0.163841] *** VALIDATE cgroup2 ***
[ 0.163885] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.163894] process: using mwait in idle threads
[ 0.163896] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.163897] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.163901] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.163902] Spectre V2 : Mitigation: Full generic retpoline
[ 0.163903] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.163903] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.163904] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.163905] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.163906] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.163909] MDS: Mitigation: Clear CPU buffers
[ 0.164070] Freeing SMP alternatives memory: 40K
[ 0.166632] TSC deadline timer enabled
[ 0.166635] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.166743] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.166749] ... version: 3
[ 0.166749] ... bit width: 48
[ 0.166750] ... generic registers: 4
[ 0.166750] ... value mask: 0000ffffffffffff
[ 0.166751] ... max period: 00007fffffffffff
[ 0.166751] ... fixed-purpose events: 3
[ 0.166752] ... event mask: 000000070000000f
[ 0.166785] rcu: Hierarchical SRCU implementation.
[ 0.167729] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.167812] smp: Bringing up secondary CPUs ...
[ 0.167902] x86: Booting SMP configuration:
[ 0.167903] .... node #0, CPUs: #1
[ 0.169808] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.169863] #2 #3
[ 0.175931] smp: Brought up 1 node, 4 CPUs
[ 0.175931] smpboot: Max logical packages: 2
[ 0.175931] smpboot: Total of 4 processors activated (23146.59 BogoMIPS)
[ 0.175931] devtmpfs: initialized
[ 0.177751] x86/mm: Memory block size: 128MB
[ 0.179181] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.179181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.179181] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.179181] pinctrl core: initialized pinctrl subsystem
[ 0.179181] PM: RTC time: 15:38:17, date: 2020-01-09
[ 0.179181] NET: Registered protocol family 16
[ 0.179181] audit: initializing netlink subsys (disabled)
[ 0.179181] audit: type=2000 audit(1578584297.044:1): state=initialized audit_enabled=0 res=1
[ 0.179181] EISA bus registered
[ 0.179181] cpuidle: using governor ladder
[ 0.179181] cpuidle: using governor menu
[ 0.179181] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.179181] ACPI: bus type PCI registered
[ 0.179181] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.179181] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.179181] PCI: not using MMCONFIG
[ 0.179181] PCI: Using configuration type 1 for base access
[ 0.179181] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.179181] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.181889] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.181889] ACPI: Added _OSI(Module Device)
[ 0.181889] ACPI: Added _OSI(Processor Device)
[ 0.181889] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.181889] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181889] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.181889] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.181889] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.181889] ACPI: Deleted _OSI(Windows 2012)
[ 0.194877] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.195508] ACPI: EC: EC started
[ 0.195509] ACPI: EC: interrupt blocked
[ 0.196238] ACPI: \: Used as first EC
[ 0.196240] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.196240] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.196512] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.202398] ACPI: Dynamic OEM Table Load:
[ 0.202406] ACPI: SSDT 0xFFFF96C9CB848000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.203028] ACPI: Dynamic OEM Table Load:
[ 0.203028] ACPI: SSDT 0xFFFF96C9CB850C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.203028] ACPI: Dynamic OEM Table Load:
[ 0.203028] ACPI: SSDT 0xFFFF96C9CB9CFC00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.203255] ACPI: Interpreter enabled
[ 0.203274] ACPI: (supports S0 S3 S4 S5)
[ 0.203275] ACPI: Using IOAPIC for interrupt routing
[ 0.203300] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.206104] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.206112] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.206433] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.209940] ACPI: Power Resource [PUBS] (on)
[ 0.210073] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.211018] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.213685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.213790] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.213889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.213985] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.214079] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.214177] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.214274] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.214373] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.214462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.214466] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.214635] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
[ 0.214712] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.214713] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.214714] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.214715] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.214908] PCI host bridge to bus 0000:00
[ 0.214910] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.214911] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.214912] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.214913] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.214914] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.214915] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.214916] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.214916] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.214917] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.214918] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.214919] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.214920] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.214921] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.214922] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.214923] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.214923] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[ 0.214924] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.214926] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.214934] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.215015] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.215025] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.215030] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.215034] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 0.215045] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.215125] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.215149] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
[ 0.215217] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.215289] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.215314] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
[ 0.215388] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.215454] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 0.215473] pci 0000:00:16.3: reg 0x10: [io 0x50b0-0x50b7]
[ 0.215482] pci 0000:00:16.3: reg 0x14: [mem 0xf253c000-0xf253cfff]
[ 0.215611] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.215630] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[ 0.215638] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
[ 0.215646] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f]
[ 0.215705] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.215773] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.215794] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
[ 0.215875] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.215947] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.215968] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
[ 0.216042] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.216116] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.216277] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.216373] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.216531] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.216624] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.216784] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.216879] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.216900] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
[ 0.216982] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.217049] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.217212] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.217229] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af]
[ 0.217235] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf]
[ 0.217242] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7]
[ 0.217249] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb]
[ 0.217257] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 0.217264] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
[ 0.217305] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.217370] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.217388] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
[ 0.217408] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.217601] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
[ 0.217627] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.217663] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
[ 0.217877] pci 0000:02:00.0: supports D1 D2
[ 0.217878] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.218256] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.218260] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.218264] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.218272] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.218459] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.218675] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
[ 0.219467] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.219927] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.219935] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.220027] acpiphp: Slot [1] registered
[ 0.220036] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.220040] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.220044] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.220052] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.221402] ACPI: EC: interrupt unblocked
[ 0.221402] ACPI: EC: event unblocked
[ 0.221402] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.221402] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events
[ 0.221404] SCSI subsystem initialized
[ 0.221728] libata version 3.00 loaded.
[ 0.221739] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.221739] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.221739] pci 0000:00:02.0: vgaarb: setting as boot device
[ 0.221739] vgaarb: loaded
[ 0.221742] ACPI: bus type USB registered
[ 0.221753] usbcore: registered new interface driver usbfs
[ 0.221758] usbcore: registered new interface driver hub
[ 0.221771] usbcore: registered new device driver usb
[ 0.221794] pps_core: LinuxPPS API ver. 1 registered
[ 0.221795] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.221797] PTP clock support registered
[ 0.221810] EDAC MC: Ver: 3.0.0
[ 0.221883] Registered efivars operations
[ 0.221883] PCI: Using ACPI for IRQ routing
[ 0.223424] PCI: pci_cache_line_size set to 64 bytes
[ 0.223884] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.223886] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.223886] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.223887] e820: reserve RAM buffer [mem 0xd032a000-0xd3ffffff]
[ 0.223888] e820: reserve RAM buffer [mem 0xd6a0b000-0xd7ffffff]
[ 0.223888] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.223889] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[ 0.223988] NetLabel: Initializing
[ 0.223988] NetLabel: domain hash size = 128
[ 0.223989] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.224002] NetLabel: unlabeled traffic allowed by default
[ 0.224015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.224015] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.226753] clocksource: Switched to clocksource tsc-early
[ 0.237112] VFS: Disk quotas dquot_6.6.0
[ 0.237129] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.237158] *** VALIDATE hugetlbfs ***
[ 0.237236] AppArmor: AppArmor Filesystem Enabled
[ 0.237264] pnp: PnP ACPI init
[ 0.237793] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.237795] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.237796] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.237797] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.237799] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.237804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.237910] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.237926] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.237927] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.237928] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.237929] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.237930] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.237932] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[ 0.237934] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.237935] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.237936] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.237937] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.237938] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.237939] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.237943] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.237997] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.238017] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.238035] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.238087] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.238607] pnp: PnP ACPI: found 6 devices
[ 0.239759] thermal_sys: Registered thermal governor 'fair_share'
[ 0.239760] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.239761] thermal_sys: Registered thermal governor 'step_wise'
[ 0.239761] thermal_sys: Registered thermal governor 'user_space'
[ 0.239762] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.244282] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.244320] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.244326] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.244333] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.244337] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.244345] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.244351] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.244363] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.244365] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.244371] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.244375] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.244384] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.244385] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.244386] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.244387] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.244388] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.244389] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.244390] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.244391] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.244392] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.244393] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.244394] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.244395] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.244395] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.244396] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.244397] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.244398] pci_bus 0000:00: resource 19 [mem 0xdfa00000-0xfebfffff window]
[ 0.244399] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff window]
[ 0.244401] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.244401] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
[ 0.244402] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.244404] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[ 0.244405] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.244405] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.244406] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.244509] NET: Registered protocol family 2
[ 0.244641] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.244716] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.244918] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.245031] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.245072] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.245112] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.245209] NET: Registered protocol family 1
[ 0.245213] NET: Registered protocol family 44
[ 0.245222] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.245822] PCI: CLS 64 bytes, default 64
[ 0.245860] Trying to unpack rootfs image as initramfs...
[ 1.044470] Freeing initrd memory: 67324K
[ 1.061760] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.061763] software IO TLB: mapped [mem 0xc9cfb000-0xcdcfb000] (64MB)
[ 1.061991] check: Scanning for low memory corruption every 60 seconds
[ 1.063858] Initialise system trusted keyrings
[ 1.063866] Key type blacklist registered
[ 1.063893] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.065042] zbud: loaded
[ 1.065354] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.065491] fuse: init (API version 7.31)
[ 1.065597] Platform Keyring initialized
[ 1.070555] Key type asymmetric registered
[ 1.070556] Asymmetric key parser 'x509' registered
[ 1.070563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.070598] io scheduler mq-deadline registered
[ 1.071309] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.071359] efifb: probing for efifb
[ 1.071371] efifb: framebuffer at 0xe0000000, using 9024k, total 9024k
[ 1.071372] efifb: mode is 1920x1200x32, linelength=7680, pages=1
[ 1.071372] efifb: scrolling: redraw
[ 1.071373] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.071456] Console: switching to colour frame buffer device 240x75
[ 1.071483] fb0: EFI VGA frame buffer device
[ 1.071491] intel_idle: MWAIT substates: 0x21120
[ 1.071491] intel_idle: v0.4.1 model 0x3A
[ 1.071643] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.072077] ACPI: AC Adapter [AC] (on-line)
[ 1.072126] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.072140] ACPI: Lid Switch [LID]
[ 1.072164] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.072171] ACPI: Sleep Button [SLPB]
[ 1.072204] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.072210] ACPI: Power Button [PWRF]
[ 1.074191] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.074192] ACPI: Thermal Zone [THM0] (57 C)
[ 1.074329] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.084985] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.096395] 0000:00:16.3: ttyS4 at I/O 0x50b0 (irq = 19, base_baud = 115200) is a 16550A
[ 1.096648] Linux agpgart interface v0.103
[ 1.105774] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 1.161814] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 1.173981] loop: module loaded
[ 1.174194] libphy: Fixed MDIO Bus: probed
[ 1.174195] tun: Universal TUN/TAP device driver, 1.6
[ 1.174251] PPP generic driver version 2.4.2
[ 1.174313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.174316] ehci-pci: EHCI PCI platform driver
[ 1.174435] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.174440] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.174454] ehci-pci 0000:00:1a.0: debug port 2
[ 1.178363] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.178379] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
[ 1.193756] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.193833] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.193834] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.193835] usb usb1: Product: EHCI Host Controller
[ 1.193836] usb usb1: Manufacturer: Linux 5.3.0-24-generic ehci_hcd
[ 1.193837] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.193996] hub 1-0:1.0: USB hub found
[ 1.194004] hub 1-0:1.0: 3 ports detected
[ 1.194230] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.194234] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.194246] ehci-pci 0000:00:1d.0: debug port 2
[ 1.198138] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.198148] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
[ 1.213760] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.213825] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.213826] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.213827] usb usb2: Product: EHCI Host Controller
[ 1.213827] usb usb2: Manufacturer: Linux 5.3.0-24-generic ehci_hcd
[ 1.213828] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.214011] hub 2-0:1.0: USB hub found
[ 1.214018] hub 2-0:1.0: 3 ports detected
[ 1.214156] ehci-platform: EHCI generic platform driver
[ 1.214165] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.214168] ohci-pci: OHCI PCI platform driver
[ 1.214175] ohci-platform: OHCI generic platform driver
[ 1.214180] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.214275] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.214280] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.215343] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 1.215348] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.215485] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.215486] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.215487] usb usb3: Product: xHCI Host Controller
[ 1.215488] usb usb3: Manufacturer: Linux 5.3.0-24-generic xhci-hcd
[ 1.215488] usb usb3: SerialNumber: 0000:00:14.0
[ 1.215664] hub 3-0:1.0: USB hub found
[ 1.215681] hub 3-0:1.0: 4 ports detected
[ 1.216146] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.216149] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.216151] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.216186] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 1.216187] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.216188] usb usb4: Product: xHCI Host Controller
[ 1.216189] usb usb4: Manufacturer: Linux 5.3.0-24-generic xhci-hcd
[ 1.216190] usb usb4: SerialNumber: 0000:00:14.0
[ 1.216363] hub 4-0:1.0: USB hub found
[ 1.216376] hub 4-0:1.0: 4 ports detected
[ 1.216629] usb: port power management may be unreliable
[ 1.216939] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.218614] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.218618] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.218854] mousedev: PS/2 mouse device common for all mice
[ 1.219114] rtc_cmos 00:02: RTC can wake from S4
[ 1.219277] rtc_cmos 00:02: registered as rtc0
[ 1.219291] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.219296] i2c /dev entries driver
[ 1.219332] device-mapper: uevent: version 1.0.3
[ 1.219395] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 1.219410] platform eisa.0: Probing EISA bus 0
[ 1.219412] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.219413] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.219413] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.219414] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.219415] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.219416] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.219417] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.219417] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.219418] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.219419] platform eisa.0: EISA: Detected 0 cards
[ 1.219424] intel_pstate: Intel P-state driver initializing
[ 1.219606] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.219609] EFI Variables Facility v0.08 2004-May-17
[ 1.220614] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.235652] NET: Registered protocol family 10
[ 1.243398] Segment Routing with IPv6
[ 1.243418] NET: Registered protocol family 17
[ 1.243452] Key type dns_resolver registered
[ 1.243716] RAS: Correctable Errors collector initialized.
[ 1.243743] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.243775] microcode: Microcode Update Driver: v2.2.
[ 1.243784] sched_clock: Marking stable (1243523508, 248950)->(1262360817, -18588359)
[ 1.243877] registered taskstats version 1
[ 1.243885] Loading compiled-in X.509 certificates
[ 1.245624] Loaded X.509 cert 'Build time autogenerated kernel key: e5d093352c0b2f9930ac9a970d6d762987f1a5d4'
[ 1.245646] zswap: loaded using pool lzo/zbud
[ 1.252340] Key type big_key registered
[ 1.252344] Key type trusted registered
[ 1.255739] Key type encrypted registered
[ 1.255741] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.256363] ima: Allocated hash algorithm: sha1
[ 1.265593] ima: Error Communicating to TPM chip
[ 1.274815] ima: Error Communicating to TPM chip
[ 1.284861] ima: Error Communicating to TPM chip
[ 1.295833] ima: Error Communicating to TPM chip
[ 1.304845] ima: Error Communicating to TPM chip
[ 1.312854] ima: Error Communicating to TPM chip
[ 1.323834] ima: Error Communicating to TPM chip
[ 1.334809] ima: Error Communicating to TPM chip
[ 1.354853] No architecture policies found
[ 1.354885] evm: Initialising EVM extended attributes:
[ 1.354886] evm: security.selinux
[ 1.354886] evm: security.SMACK64
[ 1.354887] evm: security.SMACK64EXEC
[ 1.354887] evm: security.SMACK64TRANSMUTE
[ 1.354887] evm: security.SMACK64MMAP
[ 1.354887] evm: security.apparmor
[ 1.354888] evm: security.ima
[ 1.354888] evm: security.capability
[ 1.354889] evm: HMAC attrs: 0x1
[ 1.355152] PM: Magic number: 4:815:638
[ 1.355287] rtc_cmos 00:02: setting system clock to 2020-01-09T15:38:18 UTC (1578584298)
[ 1.356281] Freeing unused decrypted memory: 2040K
[ 1.356609] Freeing unused kernel image memory: 2660K
[ 1.356664] Write protecting the kernel read-only data: 22528k
[ 1.357100] Freeing unused kernel image memory: 2008K
[ 1.357317] Freeing unused kernel image memory: 1460K
[ 1.365169] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.365171] x86/mm: Checking user space page tables
[ 1.372598] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.372600] Run /init as init process
[ 1.442807] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.445666] sdhci: Secure Digital Host Controller Interface driver
[ 1.445667] sdhci: Copyright(c) Pierre Ossman
[ 1.447659] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.447660] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.447849] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.449420] ahci 0000:00:1f.2: version 3.0
[ 1.449562] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.449755] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.450347] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.459853] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.459856] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
[ 1.461002] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.494269] scsi host0: ahci
[ 1.494519] scsi host1: ahci
[ 1.494606] scsi host2: ahci
[ 1.494706] scsi host3: ahci
[ 1.494782] scsi host4: ahci
[ 1.494883] scsi host5: ahci
[ 1.494917] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 31
[ 1.494920] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 31
[ 1.494922] ata3: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538200 irq 31
[ 1.494922] ata4: DUMMY
[ 1.494924] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 31
[ 1.494925] ata6: DUMMY
[ 1.521705] i915 0000:00:02.0: enabling device (0006 -> 0007)
[ 1.522026] checking generic (e0000000 8d0000) vs hw (e0000000 10000000)
[ 1.522027] fb0: switching to inteldrmfb from EFI VGA
[ 1.522088] Console: switching to colour dummy device 80x25
[ 1.522115] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.526025] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.526026] [drm] Driver supports precise vblank timestamp query.
[ 1.526432] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem
[ 1.533784] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.537743] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.553752] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 1.557723] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.580059] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 1.580721] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.581758] acpi device:00: registered as cooling_device4
[ 1.581849] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.617088] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c4:a3:92
[ 1.617089] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.617126] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.617910] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.710397] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.710398] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.710656] hub 1-1:1.0: USB hub found
[ 1.710895] hub 1-1:1.0: 6 ports detected
[ 1.714175] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.714189] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.714342] hub 2-1:1.0: USB hub found
[ 1.714447] hub 2-1:1.0: 8 ports detected
[ 1.723743] usb 3-3: New USB device found, idVendor=feed, idProduct=0000, bcdDevice= 0.01
[ 1.723747] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.723749] usb 3-3: Product: XD87 TKL
[ 1.723751] usb 3-3: Manufacturer: KP Republic
[ 1.723753] usb 3-3: SerialNumber: 0
[ 1.728043] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.731445] usbcore: registered new interface driver usbhid
[ 1.731446] usbhid: USB HID core driver
[ 1.732983] input: KP Republic XD87 TKL as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:FEED:0000.0001/input/input7
[ 1.789964] hid-generic 0003:FEED:0000.0001: input,hidraw0: USB HID v1.11 Keyboard [KP Republic XD87 TKL] on usb-0000:00:14.0-3/input0
[ 1.790127] input: KP Republic XD87 TKL System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:FEED:0000.0002/input/input8
[ 1.812126] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.813401] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.813403] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.813405] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.814705] ata1.00: ATA-8: HGST HTS541010A7E630, SE0OA4A0, max UDMA/133
[ 1.814707] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.816281] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.816283] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.816284] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.817543] ata1.00: configured for UDMA/133
[ 1.817811] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A7 A4A0 PQ: 0 ANSI: 5
[ 1.817971] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.818087] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.818088] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.818102] sd 0:0:0:0: [sda] Write Protect is off
[ 1.818103] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.818124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.821536] sda: sda1
[ 1.821852] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.853803] input: KP Republic XD87 TKL Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:FEED:0000.0002/input/input9
[ 1.853858] hid-generic 0003:FEED:0000.0002: input,hidraw1: USB HID v1.11 Device [KP Republic XD87 TKL] on usb-0000:00:14.0-3/input1
[ 1.853986] hid-generic 0003:FEED:0000.0003: hiddev0,hidraw2: USB HID v1.11 Device [KP Republic XD87 TKL] on usb-0000:00:14.0-3/input2
[ 1.880721] fbcon: i915drmfb (fb0) is primary device
[ 1.880765] Console: switching to colour frame buffer device 240x75
[ 1.880792] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.997810] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.001807] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.085795] tsc: Refined TSC clocksource calibration: 2893.426 MHz
[ 2.085815] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns
[ 2.085866] clocksource: Switched to clocksource tsc
[ 2.113388] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[ 2.113390] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.113391] usb 2-1.5: Product: USB Receiver
[ 2.113392] usb 2-1.5: Manufacturer: Logitech
[ 2.113440] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003, bcdDevice= 1.00
[ 2.113440] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.113441] usb 1-1.1: Product: Integrated Smart Card Reader
[ 2.113442] usb 1-1.1: Manufacturer: Lenovo
[ 2.116040] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C52F.0004/input/input10
[ 2.116114] hid-generic 0003:046D:C52F.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0
[ 2.117614] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C52F.0005/input/input11
[ 2.133259] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.136231] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.136753] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.136755] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.138597] ata2.00: ATAPI: Optiarc DVD RW AD-7740H, 1.S0, max UDMA/100
[ 2.141771] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.142247] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.142249] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.144141] ata2.00: configured for UDMA/100
[ 2.147970] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7740H 1.S0 PQ: 0 ANSI: 5
[ 2.174097] hid-generic 0003:046D:C52F.0005: input,hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input1
[ 2.181429] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.193797] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 2.196500] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[ 2.214433] logitech-djreceiver 0003:046D:C52F.0004: hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0
[ 2.216494] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.216497] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.216835] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.216904] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.253813] usb 2-1.8: new high-speed USB device number 4 using ehci-pci
[ 2.303724] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 2.303726] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.303727] usb 1-1.3: Product: Biometric Coprocessor
[ 2.303727] usb 1-1.3: Manufacturer: Auth
[ 2.314374] logitech-djreceiver 0003:046D:C52F.0005: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input1
[ 2.362274] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.362275] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.362549] hub 2-1.8:1.0: USB hub found
[ 2.363303] hub 2-1.8:1.0: 7 ports detected
[ 2.374700] logitech-djreceiver 0003:046D:C52F.0005: device of type eQUAD step 4 DJ (0x04) connected on slot 1
[ 2.375372] input: Logitech Wireless Mouse PID:4019 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C52F.0005/0003:046D:4019.0006/input/input14
[ 2.375462] input: Logitech Wireless Mouse PID:4019 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C52F.0005/0003:046D:4019.0006/input/input15
[ 2.375515] hid-generic 0003:046D:4019.0006: input,hidraw5: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4019] on usb-0000:00:1d.0-1.5/input1:1
[ 2.381728] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ 2.476990] input: Logitech M187 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C52F.0005/0003:046D:4019.0006/input/input19
[ 2.477185] logitech-hidpp-device 0003:046D:4019.0006: input,hidraw5: USB HID v1.11 Mouse [Logitech M187] on usb-0000:00:1d.0-1.5/input1:1
[ 2.498729] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.498731] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.498732] usb 1-1.4: Product: BCM20702A0
[ 2.498733] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.498734] usb 1-1.4: SerialNumber: E006E6BB34C1
[ 2.533160] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.533617] ata3.00: LPM support broken, forcing max_power
[ 2.534108] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.534109] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.534110] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.534645] ata3.00: supports DRM functions and may not be fully accessible
[ 2.534791] ata3.00: READ LOG DMA EXT failed, trying PIO
[ 2.540848] ata3.00: disabling queued TRIM support
[ 2.540850] ata3.00: ATA-9: Crucial_CT480M500SSD3, MU05, max UDMA/133
[ 2.540851] ata3.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.554757] ata3.00: LPM support broken, forcing max_power
[ 2.555262] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.555264] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.555265] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.555716] ata3.00: supports DRM functions and may not be fully accessible
[ 2.561991] ata3.00: disabling queued TRIM support
[ 2.575480] ata3.00: configured for UDMA/133
[ 2.577795] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[ 2.586100] scsi 2:0:0:0: Direct-Access ATA Crucial_CT480M50 MU05 PQ: 0 ANSI: 5
[ 2.586386] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.586393] ata3.00: Enabling discard_zeroes_data
[ 2.586454] sd 2:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 2.586456] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 2.586470] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.586472] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.586489] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.586632] ata3.00: Enabling discard_zeroes_data
[ 2.588340] sdb: sdb1 sdb2
[ 2.588757] ata3.00: Enabling discard_zeroes_data
[ 2.588947] sd 2:0:0:0: [sdb] supports TCG Opal
[ 2.588950] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.649813] usb 2-1.8.1: new full-speed USB device number 5 using ehci-pci
[ 2.694521] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.63
[ 2.694523] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.694524] usb 1-1.6: Product: Integrated Camera
[ 2.694524] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.901391] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.305005] usb 2-1.8.1: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
[ 3.305009] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.305012] usb 2-1.8.1: Product: USB Audio Device
[ 3.305014] usb 2-1.8.1: Manufacturer: GeneralPlus
[ 3.306357] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.3/0003:1B3F:2008.0007/input/input20
[ 3.366102] hid-generic 0003:1B3F:2008.0007: input,hidraw6: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:1d.0-1.8.1/input3
[ 4.141719] raid6: sse2x4 gen() 15049 MB/s
[ 4.189721] raid6: sse2x4 xor() 10263 MB/s
[ 4.237719] raid6: sse2x2 gen() 12576 MB/s
[ 4.285719] raid6: sse2x2 xor() 8443 MB/s
[ 4.333723] raid6: sse2x1 gen() 10588 MB/s
[ 4.381722] raid6: sse2x1 xor() 7580 MB/s
[ 4.381723] raid6: using algorithm sse2x4 gen() 15049 MB/s
[ 4.381723] raid6: .... xor() 10263 MB/s, rmw enabled
[ 4.381724] raid6: using ssse3x2 recovery algorithm
[ 4.384315] xor: automatically using best checksumming function avx
[ 4.398827] Btrfs loaded, crc32c=crc32c-intel
[ 5.044196] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.260546] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 5.278024] systemd[1]: Detected architecture x86-64.
[ 5.279519] systemd[1]: Set hostname to <wicket>.
[ 5.404452] systemd[1]: Created slice System Slice.
[ 5.404537] systemd[1]: Listening on udev Kernel Socket.
[ 5.404584] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.404636] systemd[1]: Listening on udev Control Socket.
[ 5.404887] systemd[1]: Created slice User and Session Slice.
[ 5.404897] systemd[1]: Reached target Remote File Systems.
[ 5.404990] systemd[1]: Listening on Journal Audit Socket.
[ 5.437205] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 5.457798] lp: driver loaded but no devices found
[ 5.467584] ppdev: user-space parallel port driver
[ 5.549799] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 5.555290] systemd-journald[452]: Received request to flush runtime journal from PID 1
[ 5.583753] systemd-journald[452]: File /var/log/journal/ef635a010d284bc38d762d2b9f0e65ac/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.865882] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20190703/utaddress-213)
[ 5.865888] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.865894] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213)
[ 5.865897] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.865898] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213)
[ 5.865900] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.865901] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20190703/utaddress-213)
[ 5.865904] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.865904] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.900653] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.919231] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.970975] Intel(R) Wireless WiFi driver for Linux
[ 5.970976] Copyright(c) 2003- 2015 Intel Corporation
[ 5.971422] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.978851] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 6.014613] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 6.014615] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 6.014616] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 6.014618] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 6.043193] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 6.043194] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 6.043195] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.043196] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 6.053994] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.057027] cryptd: max_cpu_qlen set to 1000
[ 6.074935] AVX version of gcm_enc/dec engaged.
[ 6.074936] AES CTR mode by8 optimization enabled
[ 6.088804] Non-volatile memory driver v1.3
[ 6.095591] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.095592] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.095593] thinkpad_acpi: ThinkPad BIOS G1ET91WW (2.51 ), EC G1HT32WW
[ 6.095594] thinkpad_acpi: Lenovo ThinkPad T430, model 23444AG
[ 6.100110] thinkpad_acpi: radio switch found; radios are enabled
[ 6.100128] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.100128] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.104307] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.108208] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 6.130877] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 6.130886] battery: new extension: ThinkPad Battery Extension
[ 6.130941] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input21
[ 6.154536] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.177241] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.177244] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.177246] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 6.177247] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.177248] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.177250] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 6.177252] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 6.177253] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.202136] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 6.202205] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 6.202269] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 6.202328] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[ 6.202387] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[ 6.202449] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[ 6.202505] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[ 6.255315] mc: Linux media interface: v0.10
[ 6.268662] videodev: Linux video capture interface: v2.00
[ 6.345976] Bluetooth: Core ver 2.22
[ 6.346011] NET: Registered protocol family 31
[ 6.346012] Bluetooth: HCI device and connection manager initialized
[ 6.346017] Bluetooth: HCI socket layer initialized
[ 6.346019] Bluetooth: L2CAP socket layer initialized
[ 6.346023] Bluetooth: SCO socket layer initialized
[ 6.376962] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db)
[ 6.386842] usbcore: registered new interface driver btusb
[ 6.394892] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 6.394894] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 6.394896] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 6.394897] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 6.394966] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input29
[ 6.395039] usbcore: registered new interface driver uvcvideo
[ 6.395040] USB Video Class driver (1.1.1)
[ 6.466356] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 6.499837] Bluetooth: hci0: BCM: chip id 63
[ 6.500735] Bluetooth: hci0: BCM: features 0x07
[ 6.516727] Bluetooth: hci0: BCM20702A
[ 6.517822] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 6.523959] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 6.523964] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 6.529274] intel_rapl_common: Found RAPL domain package
[ 6.529276] intel_rapl_common: Found RAPL domain core
[ 6.529277] intel_rapl_common: Found RAPL domain uncore
[ 6.529281] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 6.622479] usbcore: registered new interface driver snd-usb-audio
[ 6.730445] audit: type=1400 audit(1578584303.870:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=956 comm="apparmor_parser"
[ 6.730449] audit: type=1400 audit(1578584303.870:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=956 comm="apparmor_parser"
[ 6.730452] audit: type=1400 audit(1578584303.870:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=956 comm="apparmor_parser"
[ 6.730454] audit: type=1400 audit(1578584303.870:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=956 comm="apparmor_parser"
[ 6.735313] audit: type=1400 audit(1578584303.874:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=959 comm="apparmor_parser"
[ 6.736481] audit: type=1400 audit(1578584303.874:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=955 comm="apparmor_parser"
[ 6.736484] audit: type=1400 audit(1578584303.874:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=955 comm="apparmor_parser"
[ 6.737402] audit: type=1400 audit(1578584303.874:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=960 comm="apparmor_parser"
[ 6.738209] audit: type=1400 audit(1578584303.878:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=958 comm="apparmor_parser"
[ 6.738213] audit: type=1400 audit(1578584303.878:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=958 comm="apparmor_parser"
[ 7.016443] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.016444] Bluetooth: BNEP filters: protocol multicast
[ 7.016448] Bluetooth: BNEP socket layer initialized
[ 7.244743] EXT4-fs (sda1): recovery complete
[ 7.272210] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.614266] aufs 4.x-rcN-20190805
[ 8.055068] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 8.358536] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 11.728647] wlp3s0: authenticate with f8:1a:67:33:16:44
[ 11.734147] wlp3s0: send auth to f8:1a:67:33:16:44 (try 1/3)
[ 11.808263] wlp3s0: authenticated
[ 11.809745] wlp3s0: associate with f8:1a:67:33:16:44 (try 1/3)
[ 11.811215] wlp3s0: RX AssocResp from f8:1a:67:33:16:44 (capab=0x411 status=0 aid=1)
[ 11.814404] wlp3s0: associated
[ 11.909422] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by f8:1a:67:33:16:44
[ 12.855240] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 14.412725] bpfilter: Loaded bpfilter_umh pid 2343
[ 14.610225] kauditd_printk_skb: 10 callbacks suppressed
[ 14.610226] audit: type=1400 audit(1578584311.750:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2407 comm="apparmor_parser"
[ 14.836838] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 14.838605] Bridge firewalling registered
[ 14.907939] Initializing XFRM netlink socket
[ 34.050528] logitech-hidpp-device 0003:046D:4019.0006: HID++ 2.0 device connected.
[ 38.685860] Bluetooth: RFCOMM TTY layer initialized
[ 38.685867] Bluetooth: RFCOMM socket layer initialized
[ 38.685873] Bluetooth: RFCOMM ver 1.11
[ 77.980241] usb 3-3: USB disconnect, device number 2
[ 77.999207] usb 2-1.8: USB disconnect, device number 4
[ 77.999210] usb 2-1.8.1: USB disconnect, device number 5
[ 78.140637] thinkpad_acpi: undocked from hotplug port replicator
[ 80.979686] wlp3s0: deauthenticating from f8:1a:67:33:16:44 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 81.610631] PM: suspend entry (deep)
[ 82.093354] Filesystems sync: 0.482 seconds
[ 82.093687] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 82.096279] OOM killer disabled.
[ 82.096280] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 82.097664] printk: Suspending console(s) (use no_console_suspend to debug)
[ 82.176310] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 82.179446] sd 2:0:0:0: [sdb] Stopping disk
[ 82.180303] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 82.180479] sd 0:0:0:0: [sda] Stopping disk
[ 82.329491] e1000e: EEE TX LPI TIMER: 00000011
[ 83.877516] ACPI: EC: interrupt blocked
[ 83.900818] ACPI: Preparing to enter system sleep state S3
[ 83.904113] ACPI: EC: event blocked
[ 83.904114] ACPI: EC: EC stopped
[ 83.904115] PM: Saving platform NVS memory
[ 83.904129] Disabling non-boot CPUs ...
[ 83.904572] IRQ 34: no longer affine to CPU1
[ 83.905589] smpboot: CPU 1 is now offline
[ 83.908710] IRQ 32: no longer affine to CPU2
[ 83.910159] smpboot: CPU 2 is now offline
[ 83.913428] IRQ 23: no longer affine to CPU3
[ 83.913433] IRQ 29: no longer affine to CPU3
[ 83.914461] smpboot: CPU 3 is now offline
[ 83.918488] ACPI: Low-level resume complete
[ 83.918539] ACPI: EC: EC started
[ 83.918540] PM: Restoring platform NVS memory
[ 83.919789] Enabling non-boot CPUs ...
[ 83.919843] x86: Booting SMP configuration:
[ 83.919844] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 83.922819] CPU1 is up
[ 83.922889] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 83.926365] CPU2 is up
[ 83.926428] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 83.929268] CPU3 is up
[ 83.930488] ACPI: Waking up from system sleep state S3
[ 83.940498] ACPI: EC: interrupt unblocked
[ 83.961268] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 83.967195] ACPI: EC: event unblocked
[ 83.977762] sd 0:0:0:0: [sda] Starting disk
[ 83.977781] sd 2:0:0:0: [sdb] Starting disk
[ 83.987381] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 84.217331] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
[ 84.331958] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 84.331988] ata5: SATA link down (SStatus 0 SControl 300)
[ 84.335091] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 84.335437] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 84.335442] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 84.335998] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 84.340309] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 84.340615] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 84.340619] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 84.342314] ata2.00: configured for UDMA/100
[ 84.351798] ata3.00: LPM support broken, forcing max_power
[ 84.373875] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 84.373881] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 84.373884] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 84.397435] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
[ 84.409397] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci
[ 84.410392] ata3.00: supports DRM functions and may not be fully accessible
[ 84.601440] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci
[ 84.713596] OOM killer enabled.
[ 84.713598] Restarting tasks ... done.
[ 84.783753] video LNXVIDEO:00: Restoring backlight state
[ 84.784414] PM: suspend exit
[ 84.797327] usb 2-1.8: new high-speed USB device number 6 using ehci-pci
[ 84.831820] Bluetooth: hci0: BCM: chip id 63
[ 84.832834] Bluetooth: hci0: BCM: features 0x07
[ 84.845325] usb 3-3: new full-speed USB device number 3 using xhci_hcd
[ 84.848955] Bluetooth: hci0: BCM20702A
[ 84.849816] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 84.849837] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 84.849840] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 84.909674] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 84.909677] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 84.909957] hub 2-1.8:1.0: USB hub found
[ 84.910043] hub 2-1.8:1.0: 7 ports detected
[ 85.006786] usb 3-3: New USB device found, idVendor=feed, idProduct=0000, bcdDevice= 0.01
[ 85.006788] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 85.006789] usb 3-3: Product: XD87 TKL
[ 85.006790] usb 3-3: Manufacturer: KP Republic
[ 85.006790] usb 3-3: SerialNumber: 0
[ 85.008225] input: KP Republic XD87 TKL as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:FEED:0000.0008/input/input30
[ 85.069610] hid-generic 0003:FEED:0000.0008: input,hidraw0: USB HID v1.11 Keyboard [KP Republic XD87 TKL] on usb-0000:00:14.0-3/input0
[ 85.070430] input: KP Republic XD87 TKL System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:FEED:0000.0009/input/input31
[ 85.129935] input: KP Republic XD87 TKL Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:FEED:0000.0009/input/input32
[ 85.130349] hid-generic 0003:FEED:0000.0009: input,hidraw1: USB HID v1.11 Device [KP Republic XD87 TKL] on usb-0000:00:14.0-3/input1
[ 85.131558] hid-generic 0003:FEED:0000.000A: hiddev0,hidraw2: USB HID v1.11 Device [KP Republic XD87 TKL] on usb-0000:00:14.0-3/input2
[ 85.160730] ata3.00: disabling queued TRIM support
[ 85.173577] ata3.00: LPM support broken, forcing max_power
[ 85.173924] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 85.173927] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 85.173929] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 85.174151] ata3.00: supports DRM functions and may not be fully accessible
[ 85.179910] ata3.00: disabling queued TRIM support
[ 85.192599] ata3.00: configured for UDMA/133
[ 85.202757] ata3.00: Enabling discard_zeroes_data
[ 85.969299] usb 2-1.8.1: new full-speed USB device number 7 using ehci-pci
[ 86.083422] usb 2-1.8.1: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
[ 86.083425] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 86.083426] usb 2-1.8.1: Product: USB Audio Device
[ 86.083428] usb 2-1.8.1: Manufacturer: GeneralPlus
[ 86.101369] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.3/0003:1B3F:2008.000B/input/input33
[ 86.161832] hid-generic 0003:1B3F:2008.000B: input,hidraw6: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:1d.0-1.8.1/input3
[ 86.261317] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 86.262619] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 86.262622] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 86.262623] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 86.265365] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 86.265367] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 86.265369] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 86.266665] ata1.00: configured for UDMA/133
[ 86.589393] e1000e: enp0s25 NIC Link is Down
[ 86.823434] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 87.146269] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 90.412682] wlp3s0: authenticate with f8:1a:67:33:16:44
[ 90.415682] wlp3s0: send auth to f8:1a:67:33:16:44 (try 1/3)
[ 90.416827] wlp3s0: authenticated
[ 90.417854] wlp3s0: associate with f8:1a:67:33:16:44 (try 1/3)
[ 90.419273] wlp3s0: RX AssocResp from f8:1a:67:33:16:44 (capab=0x411 status=0 aid=1)
[ 90.422000] wlp3s0: associated
[ 90.427887] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 90.491427] wlp3s0: Limiting TX power to 23 (23 - 0) dBm as advertised by f8:1a:67:33:16:44
[ 711.718570] FS-Cache: Loaded
[ 711.738665] FS-Cache: Netfs 'cifs' registered for caching
[ 711.745212] Key type cifs.spnego registered
[ 711.745218] Key type cifs.idmap registered
[ 711.745535] CIFS: Attempting to mount //10.9.8.2/Video
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment