Skip to content

Instantly share code, notes, and snippets.

View lonelypositron's full-sized avatar

lonelypositron

View GitHub Profile
@lonelypositron
lonelypositron / Hetzner OPNsense network configuration.md
Created February 7, 2024 21:09 — forked from NicklasMatzulla/Hetzner OPNsense network configuration.md
Hetzner network configuration for virtualization with Proxmox and OPNsense.

About

Warning
This network configuration is designed for the network infrastructure of Hetzner servers.

This network configuration is used to use Proxmox as a virtualization platform and OPNsense as a firewall. Both single addresses and subnets can be added without any problems.

Installation

auto lo
iface lo inet static

Proxmox VE Installation on Hetzner Server via Rescue System

Follow these steps to install Proxmox VE on a Hetzner server via the Rescue System. The Rescue System is a Linux-based environment that can be booted into to perform system recovery tasks. We'll be using it to install Proxmox VE.

In order to complete the process, it is indeed necessary to first boot into the Rescue System and then connect to it via SSH. This will allow you to run the commands for installing Proxmox VE. Here are the steps:

Starting the Rescue System

  1. Log into the Hetzner Robot.
  2. Under "Main Functions; Server" select the desired server and then open the tab "Rescue".