Created
June 1, 2024 15:42
-
-
Save loopDelicious/2ab5c7ab3b254bf78c57133174115bfd to your computer and use it in GitHub Desktop.
Set up mmwave sensor on ESPHome
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# Sets up mmwave sensor on ESPHome | |
# https://esphome.io/components/sensor/ld2410.html | |
ld2410: | |
uart: | |
tx_pin: 26 | |
rx_pin: 12 | |
baud_rate: 256000 | |
parity: NONE | |
stop_bits: 1 | |
binary_sensor: | |
- platform: ld2410 | |
has_target: | |
name: Presence | |
has_moving_target: | |
name: Moving Target | |
has_still_target: | |
name: Still Target | |
out_pin_presence_status: | |
name: out pin presence status | |
switch: | |
- platform: ld2410 | |
engineering_mode: | |
name: "engineering mode" | |
bluetooth: | |
name: "control bluetooth" | |
number: | |
- platform: ld2410 | |
timeout: | |
name: timeout | |
light_threshold: | |
name: light threshold | |
max_move_distance_gate: | |
name: max move distance gate | |
max_still_distance_gate: | |
name: max still distance gate | |
g0: | |
move_threshold: | |
name: g0 move threshold | |
still_threshold: | |
name: g0 still threshold | |
g1: | |
move_threshold: | |
name: g1 move threshold | |
still_threshold: | |
name: g1 still threshold | |
g2: | |
move_threshold: | |
name: g2 move threshold | |
still_threshold: | |
name: g2 still threshold | |
g3: | |
move_threshold: | |
name: g3 move threshold | |
still_threshold: | |
name: g3 still threshold | |
g4: | |
move_threshold: | |
name: g4 move threshold | |
still_threshold: | |
name: g4 still threshold | |
g5: | |
move_threshold: | |
name: g5 move threshold | |
still_threshold: | |
name: g5 still threshold | |
g6: | |
move_threshold: | |
name: g6 move threshold | |
still_threshold: | |
name: g6 still threshold | |
g7: | |
move_threshold: | |
name: g7 move threshold | |
still_threshold: | |
name: g7 still threshold | |
g8: | |
move_threshold: | |
name: g8 move threshold | |
still_threshold: | |
name: g8 still threshold | |
button: | |
- platform: ld2410 | |
factory_reset: | |
name: "factory reset" | |
restart: | |
name: "restart" | |
query_params: | |
name: query params | |
text_sensor: | |
- platform: ld2410 | |
version: | |
name: "firmware version" | |
mac_address: | |
name: "mac address" | |
select: | |
- platform: ld2410 | |
distance_resolution: | |
name: "distance resolution" | |
baud_rate: | |
name: "baud rate" | |
light_function: | |
name: light function | |
out_pin_level: | |
name: out pin level | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment