-
-
Save lorvent/402e4c7064a68fe2960b4985c35b8977 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| import freqtrade.vendor.qtpylib.indicators as qtpylib | |
| import numpy as np | |
| import talib.abstract as ta | |
| from freqtrade.strategy.interface import IStrategy | |
| from freqtrade.strategy import (merge_informative_pair, | |
| DecimalParameter, IntParameter, CategoricalParameter) | |
| from pandas import DataFrame | |
| from functools import reduce | |
| from freqtrade.persistence import Trade | |
| from datetime import datetime | |
| ########################################################################################################### | |
| ## NostalgiaForInfinityV5 by iterativ ## | |
| ## ## | |
| ## Strategy for Freqtrade https://github.com/freqtrade/freqtrade ## | |
| ## ## | |
| ########################################################################################################### | |
| ## GENERAL RECOMMENDATIONS ## | |
| ## ## | |
| ## For optimal performance, suggested to use between 4 and 6 open trades, with unlimited stake. ## | |
| ## A pairlist with 40 to 80 pairs. Volume pairlist works well. ## | |
| ## Prefer stable coin (USDT, BUSDT etc) pairs, instead of BTC or ETH pairs. ## | |
| ## Highly recommended to blacklist leveraged tokens (*BULL, *BEAR, *UP, *DOWN etc). ## | |
| ## Ensure that you don't override any variables in you config.json. Especially ## | |
| ## the timeframe (must be 5m). ## | |
| ## use_sell_signal must set to true (or not set at all). ## | |
| ## sell_profit_only must set to false (or not set at all). ## | |
| ## ignore_roi_if_buy_signal must set to true (or not set at all). ## | |
| ## ## | |
| ########################################################################################################### | |
| ## DONATIONS ## | |
| ## ## | |
| ## Absolutely not required. However, will be accepted as a token of appreciation. ## | |
| ## ## | |
| ## BTC: bc1qvflsvddkmxh7eqhc4jyu5z5k6xcw3ay8jl49sk ## | |
| ## ETH (ERC20): 0x83D3cFb8001BDC5d2211cBeBB8cB3461E5f7Ec91 ## | |
| ## BEP20/BSC (ETH, BNB, ...): 0x86A0B21a20b39d16424B7c8003E4A7e12d78ABEe ## | |
| ## ## | |
| ########################################################################################################### | |
| # 20210624 | |
| # NostalgiaForInfinityV5 + MultiOffsetLamboV0 + Hyper-optimized some parameters. | |
| # I hope you do enough testing before proceeding. | |
| # Thank you to those who created these strategies. | |
| class NostalgiaForInfinityV5MultiOffsetAndHO(IStrategy): | |
| INTERFACE_VERSION = 2 | |
| # Optional order type mapping. | |
| order_types = { | |
| 'buy': 'limit', | |
| 'sell': 'limit', | |
| 'trailing_stop_loss': 'limit', | |
| 'stoploss': 'limit', | |
| 'stoploss_on_exchange': False | |
| } | |
| ############################################################# | |
| buy_params = { | |
| ############# | |
| # Enable/Disable conditions | |
| "buy_condition_1_enable": True, | |
| "buy_condition_2_enable": True, | |
| "buy_condition_3_enable": True, | |
| "buy_condition_4_enable": True, | |
| "buy_condition_5_enable": True, | |
| "buy_condition_6_enable": True, | |
| "buy_condition_7_enable": True, | |
| "buy_condition_8_enable": True, | |
| "buy_condition_9_enable": True, | |
| "buy_condition_10_enable": True, | |
| "buy_condition_11_enable": True, | |
| "buy_condition_12_enable": True, | |
| "buy_condition_13_enable": True, | |
| "buy_condition_14_enable": True, | |
| "buy_condition_15_enable": True, | |
| "buy_condition_16_enable": True, | |
| "buy_condition_17_enable": True, | |
| "buy_condition_18_enable": True, | |
| "buy_condition_19_enable": True, | |
| "buy_condition_20_enable": True, | |
| "buy_condition_21_enable": True, | |
| # Hyperopt | |
| # Multi Offset | |
| "base_nb_candles_buy": 47, | |
| "buy_chop_min_19": 41.0, | |
| "buy_rsi_1h_min_19": 50.9, | |
| "ewo_high": 3.28, | |
| "ewo_low": -16.004, | |
| "low_offset_ema": 0.93, | |
| "low_offset_kama": 0.985, | |
| "low_offset_sma": 0.9, | |
| "low_offset_t3": 0.975, | |
| "low_offset_trima": 0.973, | |
| } | |
| sell_params = { | |
| ############# | |
| # Enable/Disable conditions | |
| "sell_condition_1_enable": True, | |
| "sell_condition_2_enable": True, | |
| "sell_condition_3_enable": True, | |
| "sell_condition_4_enable": True, | |
| "sell_condition_5_enable": True, | |
| "sell_condition_6_enable": True, | |
| "sell_condition_7_enable": True, | |
| "sell_condition_8_enable": True, | |
| ############# | |
| # Hyperopt | |
| # Multi Offset | |
| "base_nb_candles_sell": 34, | |
| "high_offset_ema": 1.047, | |
| "high_offset_kama": 1.07, | |
| "high_offset_sma": 1.051, | |
| "high_offset_t3": 0.999, | |
| "high_offset_trima": 1.096, | |
| } | |
| # ROI table: | |
| minimal_roi = { | |
| "0": 0.01, | |
| } | |
| stoploss = -0.99 | |
| # Multi Offset | |
| base_nb_candles_buy = IntParameter( | |
| 5, 80, default=20, load=True, space='buy', optimize=True) | |
| base_nb_candles_sell = IntParameter( | |
| 5, 80, default=20, load=True, space='sell', optimize=True) | |
| low_offset_sma = DecimalParameter( | |
| 0.9, 0.99, default=0.958, load=True, space='buy', optimize=True) | |
| high_offset_sma = DecimalParameter( | |
| 0.99, 1.1, default=1.012, load=True, space='sell', optimize=True) | |
| low_offset_ema = DecimalParameter( | |
| 0.9, 0.99, default=0.958, load=True, space='buy', optimize=True) | |
| high_offset_ema = DecimalParameter( | |
| 0.99, 1.1, default=1.012, load=True, space='sell', optimize=True) | |
| low_offset_trima = DecimalParameter( | |
| 0.9, 0.99, default=0.958, load=True, space='buy', optimize=True) | |
| high_offset_trima = DecimalParameter( | |
| 0.99, 1.1, default=1.012, load=True, space='sell', optimize=True) | |
| low_offset_t3 = DecimalParameter( | |
| 0.9, 0.99, default=0.958, load=True, space='buy', optimize=True) | |
| high_offset_t3 = DecimalParameter( | |
| 0.99, 1.1, default=1.012, load=True, space='sell', optimize=True) | |
| low_offset_kama = DecimalParameter( | |
| 0.9, 0.99, default=0.958, load=True, space='buy', optimize=True) | |
| high_offset_kama = DecimalParameter( | |
| 0.99, 1.1, default=1.012, load=True, space='sell', optimize=True) | |
| # Protection | |
| ewo_low = DecimalParameter( | |
| -20.0, -8.0, default=-20.0, load=True, space='buy', optimize=True) | |
| ewo_high = DecimalParameter( | |
| 2.0, 12.0, default=6.0, load=True, space='buy', optimize=True) | |
| fast_ewo = IntParameter( | |
| 10, 50, default=50, load=True, space='buy', optimize=False) | |
| slow_ewo = IntParameter( | |
| 100, 200, default=200, load=True, space='buy', optimize=False) | |
| # MA list | |
| ma_types = ['sma', 'ema', 'trima', 't3', 'kama'] | |
| ma_map = { | |
| 'sma': { | |
| 'low_offset': low_offset_sma.value, | |
| 'high_offset': high_offset_sma.value, | |
| 'calculate': ta.SMA | |
| }, | |
| 'ema': { | |
| 'low_offset': low_offset_ema.value, | |
| 'high_offset': high_offset_ema.value, | |
| 'calculate': ta.EMA | |
| }, | |
| 'trima': { | |
| 'low_offset': low_offset_trima.value, | |
| 'high_offset': high_offset_trima.value, | |
| 'calculate': ta.TRIMA | |
| }, | |
| 't3': { | |
| 'low_offset': low_offset_t3.value, | |
| 'high_offset': high_offset_t3.value, | |
| 'calculate': ta.T3 | |
| }, | |
| 'kama': { | |
| 'low_offset': low_offset_kama.value, | |
| 'high_offset': high_offset_kama.value, | |
| 'calculate': ta.KAMA | |
| } | |
| } | |
| # Trailing stoploss (not used) | |
| trailing_stop = False | |
| trailing_only_offset_is_reached = True | |
| trailing_stop_positive = 0.01 | |
| trailing_stop_positive_offset = 0.03 | |
| use_custom_stoploss = False | |
| # Optimal timeframe for the strategy. | |
| timeframe = '5m' | |
| inf_1h = '1h' | |
| # Run "populate_indicators()" only for new candle. | |
| process_only_new_candles = True | |
| # These values can be overridden in the "ask_strategy" section in the config. | |
| use_sell_signal = True | |
| sell_profit_only = False | |
| ignore_roi_if_buy_signal = True | |
| # Number of candles the strategy requires before producing valid signals | |
| startup_candle_count: int = 300 | |
| # plot config | |
| plot_config = { | |
| 'main_plot': { | |
| 'ma_offset_buy': {'color': 'orange'}, | |
| 'ma_offset_sell': {'color': 'orange'}, | |
| }, | |
| } | |
| ############################################################# | |
| buy_condition_1_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_2_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_3_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_4_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_5_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_6_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_7_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_8_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_9_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_10_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_11_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_12_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_13_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_14_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_15_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_16_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_17_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_18_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_19_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_20_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| buy_condition_21_enable = CategoricalParameter([True, False], default=True, space='buy', optimize=False, load=True) | |
| # Normal dips | |
| buy_dip_threshold_1 = DecimalParameter(0.001, 0.05, default=0.02, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_2 = DecimalParameter(0.01, 0.2, default=0.14, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_3 = DecimalParameter(0.05, 0.4, default=0.32, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_4 = DecimalParameter(0.2, 0.5, default=0.5, space='buy', decimals=3, optimize=False, load=True) | |
| # Strict dips | |
| buy_dip_threshold_5 = DecimalParameter(0.001, 0.05, default=0.015, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_6 = DecimalParameter(0.01, 0.2, default=0.06, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_7 = DecimalParameter(0.05, 0.4, default=0.24, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_8 = DecimalParameter(0.2, 0.5, default=0.4, space='buy', decimals=3, optimize=False, load=True) | |
| # Loose dips | |
| buy_dip_threshold_9 = DecimalParameter(0.001, 0.05, default=0.026, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_10 = DecimalParameter(0.01, 0.2, default=0.24, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_11 = DecimalParameter(0.05, 0.4, default=0.42, space='buy', decimals=3, optimize=False, load=True) | |
| buy_dip_threshold_12 = DecimalParameter(0.2, 0.5, default=0.66, space='buy', decimals=3, optimize=False, load=True) | |
| # 24 hours | |
| buy_pump_pull_threshold_1 = DecimalParameter(1.5, 3.0, default=1.75, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_1 = DecimalParameter(0.4, 1.0, default=0.5, space='buy', decimals=3, optimize=False, load=True) | |
| # 36 hours | |
| buy_pump_pull_threshold_2 = DecimalParameter(1.5, 3.0, default=1.75, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_2 = DecimalParameter(0.4, 1.0, default=0.56, space='buy', decimals=3, optimize=False, load=True) | |
| # 48 hours | |
| buy_pump_pull_threshold_3 = DecimalParameter(1.5, 3.0, default=1.75, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_3 = DecimalParameter(0.4, 1.0, default=0.85, space='buy', decimals=3, optimize=False, load=True) | |
| # 24 hours strict | |
| buy_pump_pull_threshold_4 = DecimalParameter(1.5, 3.0, default=2.2, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_4 = DecimalParameter(0.4, 1.0, default=0.4, space='buy', decimals=3, optimize=False, load=True) | |
| # 36 hours strict | |
| buy_pump_pull_threshold_5 = DecimalParameter(1.5, 3.0, default=2.0, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_5 = DecimalParameter(0.4, 1.0, default=0.56, space='buy', decimals=3, optimize=False, load=True) | |
| # 48 hours strict | |
| buy_pump_pull_threshold_6 = DecimalParameter(1.5, 3.0, default=2.0, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_6 = DecimalParameter(0.4, 1.0, default=0.68, space='buy', decimals=3, optimize=False, load=True) | |
| # 24 hours loose | |
| buy_pump_pull_threshold_7 = DecimalParameter(1.5, 3.0, default=1.7, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_7 = DecimalParameter(0.4, 1.0, default=0.66, space='buy', decimals=3, optimize=False, load=True) | |
| # 36 hours loose | |
| buy_pump_pull_threshold_8 = DecimalParameter(1.5, 3.0, default=1.7, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_8 = DecimalParameter(0.4, 1.0, default=0.7, space='buy', decimals=3, optimize=False, load=True) | |
| # 48 hours loose | |
| buy_pump_pull_threshold_9 = DecimalParameter(1.5, 3.0, default=1.4, space='buy', decimals=2, optimize=False, load=True) | |
| buy_pump_threshold_9 = DecimalParameter(0.4, 1.8, default=1.3, space='buy', decimals=3, optimize=False, load=True) | |
| buy_min_inc_1 = DecimalParameter(0.01, 0.05, default=0.022, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_1h_min_1 = DecimalParameter(25.0, 40.0, default=30.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1h_max_1 = DecimalParameter(70.0, 90.0, default=84.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1 = DecimalParameter(20.0, 40.0, default=36.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_mfi_1 = DecimalParameter(20.0, 40.0, default=26.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_2 = DecimalParameter(1.0, 10.0, default=2.6, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1h_min_2 = DecimalParameter(30.0, 40.0, default=32.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1h_max_2 = DecimalParameter(70.0, 95.0, default=84.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1h_diff_2 = DecimalParameter(30.0, 50.0, default=39.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_mfi_2 = DecimalParameter(30.0, 56.0, default=49.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_bb_offset_2 = DecimalParameter(0.97, 0.999, default=0.983, space='buy', decimals=3, optimize=False, load=True) | |
| buy_bb40_bbdelta_close_3 = DecimalParameter(0.005, 0.06, default=0.057, space='buy', optimize=False, load=True) | |
| buy_bb40_closedelta_close_3 = DecimalParameter(0.01, 0.03, default=0.023, space='buy', optimize=False, load=True) | |
| buy_bb40_tail_bbdelta_3 = DecimalParameter(0.15, 0.45, default=0.418, space='buy', optimize=False, load=True) | |
| buy_ema_rel_3 = DecimalParameter(0.97, 0.999, default=0.986, space='buy', decimals=3, optimize=False, load=True) | |
| buy_bb20_close_bblowerband_4 = DecimalParameter(0.96, 0.99, default=0.979, space='buy', optimize=False, load=True) | |
| buy_bb20_volume_4 = DecimalParameter(1.0, 20.0, default=10.0, space='buy', decimals=2, optimize=False, load=True) | |
| buy_ema_open_mult_5 = DecimalParameter(0.016, 0.03, default=0.019, space='buy', decimals=3, optimize=False, load=True) | |
| buy_bb_offset_5 = DecimalParameter(0.98, 1.0, default=0.999, space='buy', decimals=3, optimize=False, load=True) | |
| buy_ema_rel_5 = DecimalParameter(0.97, 0.999, default=0.982, space='buy', decimals=3, optimize=False, load=True) | |
| buy_ema_open_mult_6 = DecimalParameter(0.02, 0.03, default=0.025, space='buy', decimals=3, optimize=False, load=True) | |
| buy_bb_offset_6 = DecimalParameter(0.98, 0.999, default=0.984, space='buy', decimals=3, optimize=False, load=True) | |
| buy_volume_7 = DecimalParameter(1.0, 10.0, default=2.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ema_open_mult_7 = DecimalParameter(0.02, 0.04, default=0.03, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_7 = DecimalParameter(24.0, 50.0, default=36.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ema_rel_7 = DecimalParameter(0.97, 0.999, default=0.986, space='buy', decimals=3, optimize=False, load=True) | |
| buy_volume_8 = DecimalParameter(1.0, 6.0, default=2.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_8 = DecimalParameter(36.0, 40.0, default=20.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_tail_diff_8 = DecimalParameter(3.0, 10.0, default=3.5, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_9 = DecimalParameter(1.0, 4.0, default=1.0, space='buy', decimals=2, optimize=False, load=True) | |
| buy_ma_offset_9 = DecimalParameter(0.94, 0.99, default=0.97, space='buy', decimals=3, optimize=False, load=True) | |
| buy_bb_offset_9 = DecimalParameter(0.97, 0.99, default=0.985, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_1h_min_9 = DecimalParameter(26.0, 40.0, default=30.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1h_max_9 = DecimalParameter(70.0, 90.0, default=88.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_mfi_9 = DecimalParameter(36.0, 65.0, default=30.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_10 = DecimalParameter(1.0, 8.0, default=2.4, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ma_offset_10 = DecimalParameter(0.93, 0.97, default=0.944, space='buy', decimals=3, optimize=False, load=True) | |
| buy_bb_offset_10 = DecimalParameter(0.97, 0.99, default=0.994, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_1h_10 = DecimalParameter(20.0, 40.0, default=37.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ma_offset_11 = DecimalParameter(0.93, 0.99, default=0.939, space='buy', decimals=3, optimize=False, load=True) | |
| buy_min_inc_11 = DecimalParameter(0.005, 0.05, default=0.022, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_1h_min_11 = DecimalParameter(40.0, 60.0, default=56.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1h_max_11 = DecimalParameter(70.0, 90.0, default=84.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_11 = DecimalParameter(30.0, 48.0, default=48.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_mfi_11 = DecimalParameter(36.0, 56.0, default=38.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_12 = DecimalParameter(1.0, 10.0, default=1.7, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ma_offset_12 = DecimalParameter(0.93, 0.97, default=0.936, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_12 = DecimalParameter(26.0, 40.0, default=30.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ewo_12 = DecimalParameter(2.0, 6.0, default=2.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_13 = DecimalParameter(1.0, 10.0, default=1.6, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ma_offset_13 = DecimalParameter(0.93, 0.98, default=0.978, space='buy', decimals=3, optimize=False, load=True) | |
| buy_ewo_13 = DecimalParameter(-14.0, -7.0, default=-10.4, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_14 = DecimalParameter(1.0, 10.0, default=2.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ema_open_mult_14 = DecimalParameter(0.01, 0.03, default=0.014, space='buy', decimals=3, optimize=False, load=True) | |
| buy_bb_offset_14 = DecimalParameter(0.98, 1.0, default=0.986, space='buy', decimals=3, optimize=False, load=True) | |
| buy_ma_offset_14 = DecimalParameter(0.93, 0.99, default=0.97, space='buy', decimals=3, optimize=False, load=True) | |
| buy_volume_15 = DecimalParameter(1.0, 10.0, default=2.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ema_open_mult_15 = DecimalParameter(0.02, 0.04, default=0.018, space='buy', decimals=3, optimize=False, load=True) | |
| buy_ma_offset_15 = DecimalParameter(0.93, 0.99, default=0.954, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_15 = DecimalParameter(30.0, 50.0, default=28.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ema_rel_15 = DecimalParameter(0.97, 0.999, default=0.988, space='buy', decimals=3, optimize=False, load=True) | |
| buy_volume_16 = DecimalParameter(1.0, 10.0, default=2.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ma_offset_16 = DecimalParameter(0.93, 0.97, default=0.952, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_16 = DecimalParameter(26.0, 50.0, default=31.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ewo_16 = DecimalParameter(4.0, 8.0, default=2.8, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_17 = DecimalParameter(0.5, 8.0, default=2.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_ma_offset_17 = DecimalParameter(0.93, 0.98, default=0.958, space='buy', decimals=3, optimize=False, load=True) | |
| buy_ewo_17 = DecimalParameter(-18.0, -10.0, default=-12.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_18 = DecimalParameter(1.0, 6.0, default=2.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_18 = DecimalParameter(16.0, 32.0, default=26.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_bb_offset_18 = DecimalParameter(0.98, 1.0, default=0.982, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_1h_min_19 = DecimalParameter(40.0, 70.0, default=50.0, space='buy', decimals=1, optimize=True, load=True) | |
| buy_chop_min_19 = DecimalParameter(20.0, 60.0, default=24.1, space='buy', decimals=1, optimize=True, load=True) | |
| buy_volume_20 = DecimalParameter(0.5, 6.0, default=1.2, space='buy', decimals=1, optimize=False, load=True) | |
| #buy_ema_rel_20 = DecimalParameter(0.97, 0.999, default=0.988, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_20 = DecimalParameter(20.0, 36.0, default=26.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1h_20 = DecimalParameter(14.0, 30.0, default=20.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_volume_21 = DecimalParameter(0.5, 6.0, default=3.0, space='buy', decimals=1, optimize=False, load=True) | |
| #buy_ema_rel_21 = DecimalParameter(0.97, 0.999, default=0.988, space='buy', decimals=3, optimize=False, load=True) | |
| buy_rsi_21 = DecimalParameter(10.0, 28.0, default=23.0, space='buy', decimals=1, optimize=False, load=True) | |
| buy_rsi_1h_21 = DecimalParameter(18.0, 40.0, default=24.0, space='buy', decimals=1, optimize=False, load=True) | |
| # Sell | |
| sell_condition_1_enable = CategoricalParameter([True, False], default=True, space='sell', optimize=False, load=True) | |
| sell_condition_2_enable = CategoricalParameter([True, False], default=True, space='sell', optimize=False, load=True) | |
| sell_condition_3_enable = CategoricalParameter([True, False], default=True, space='sell', optimize=False, load=True) | |
| sell_condition_4_enable = CategoricalParameter([True, False], default=True, space='sell', optimize=False, load=True) | |
| sell_condition_5_enable = CategoricalParameter([True, False], default=True, space='sell', optimize=False, load=True) | |
| sell_condition_6_enable = CategoricalParameter([True, False], default=True, space='sell', optimize=False, load=True) | |
| sell_condition_7_enable = CategoricalParameter([True, False], default=True, space='sell', optimize=False, load=True) | |
| sell_condition_8_enable = CategoricalParameter([True, False], default=True, space='sell', optimize=False, load=True) | |
| sell_rsi_bb_1 = DecimalParameter(60.0, 80.0, default=79.5, space='sell', decimals=1, optimize=False, load=True) | |
| sell_rsi_bb_2 = DecimalParameter(72.0, 90.0, default=81, space='sell', decimals=1, optimize=False, load=True) | |
| sell_rsi_main_3 = DecimalParameter(77.0, 90.0, default=82, space='sell', decimals=1, optimize=False, load=True) | |
| sell_dual_rsi_rsi_4 = DecimalParameter(72.0, 84.0, default=73.4, space='sell', decimals=1, optimize=False, load=True) | |
| sell_dual_rsi_rsi_1h_4 = DecimalParameter(78.0, 92.0, default=79.6, space='sell', decimals=1, optimize=False, load=True) | |
| sell_ema_relative_5 = DecimalParameter(0.005, 0.05, default=0.024, space='sell', optimize=False, load=True) | |
| sell_rsi_diff_5 = DecimalParameter(0.0, 20.0, default=4.4, space='sell', optimize=False, load=True) | |
| sell_rsi_under_6 = DecimalParameter(72.0, 90.0, default=79.0, space='sell', decimals=1, optimize=False, load=True) | |
| sell_rsi_1h_7 = DecimalParameter(80.0, 95.0, default=81.7, space='sell', decimals=1, optimize=False, load=True) | |
| sell_bb_relative_8 = DecimalParameter(1.05, 1.3, default=1.1, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_profit_0 = DecimalParameter(0.01, 0.1, default=0.01, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_rsi_0 = DecimalParameter(30.0, 40.0, default=33.0, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_profit_1 = DecimalParameter(0.01, 0.1, default=0.03, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_rsi_1 = DecimalParameter(30.0, 50.0, default=38.0, space='sell', decimals=2, optimize=False, load=True) | |
| sell_custom_profit_2 = DecimalParameter(0.01, 0.1, default=0.05, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_rsi_2 = DecimalParameter(34.0, 50.0, default=43.0, space='sell', decimals=2, optimize=False, load=True) | |
| sell_custom_profit_3 = DecimalParameter(0.06, 0.30, default=0.08, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_rsi_3 = DecimalParameter(38.0, 55.0, default=48.0, space='sell', decimals=2, optimize=False, load=True) | |
| sell_custom_profit_4 = DecimalParameter(0.3, 0.6, default=0.25, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_rsi_4 = DecimalParameter(40.0, 58.0, default=50.0, space='sell', decimals=2, optimize=False, load=True) | |
| sell_custom_under_profit_1 = DecimalParameter(0.01, 0.10, default=0.02, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_under_rsi_1 = DecimalParameter(36.0, 60.0, default=56.0, space='sell', decimals=1, optimize=False, load=True) | |
| sell_custom_under_profit_2 = DecimalParameter(0.01, 0.10, default=0.04, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_under_rsi_2 = DecimalParameter(46.0, 66.0, default=60.0, space='sell', decimals=1, optimize=False, load=True) | |
| sell_custom_under_profit_3 = DecimalParameter(0.01, 0.10, default=0.6, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_under_rsi_3 = DecimalParameter(50.0, 68.0, default=62.0, space='sell', decimals=1, optimize=False, load=True) | |
| sell_custom_dec_profit_1 = DecimalParameter(0.01, 0.10, default=0.05, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_dec_profit_2 = DecimalParameter(0.05, 0.2, default=0.07, space='sell', decimals=3, optimize=False, load=True) | |
| sell_trail_profit_min_1 = DecimalParameter(0.1, 0.25, default=0.15, space='sell', decimals=3, optimize=False, load=True) | |
| sell_trail_profit_max_1 = DecimalParameter(0.3, 0.5, default=0.46, space='sell', decimals=2, optimize=False, load=True) | |
| sell_trail_down_1 = DecimalParameter(0.04, 0.2, default=0.18, space='sell', decimals=3, optimize=False, load=True) | |
| sell_trail_profit_min_2 = DecimalParameter(0.01, 0.1, default=0.01, space='sell', decimals=3, optimize=False, load=True) | |
| sell_trail_profit_max_2 = DecimalParameter(0.08, 0.25, default=0.12, space='sell', decimals=2, optimize=False, load=True) | |
| sell_trail_down_2 = DecimalParameter(0.04, 0.2, default=0.14, space='sell', decimals=3, optimize=False, load=True) | |
| sell_trail_profit_min_3 = DecimalParameter(0.01, 0.1, default=0.05, space='sell', decimals=3, optimize=False, load=True) | |
| sell_trail_profit_max_3 = DecimalParameter(0.08, 0.16, default=0.1, space='sell', decimals=2, optimize=False, load=True) | |
| sell_trail_down_3 = DecimalParameter(0.01, 0.04, default=0.01, space='sell', decimals=3, optimize=False, load=True) | |
| sell_custom_profit_under_rel_1 = DecimalParameter(0.01, 0.04, default=0.024, space='sell', optimize=False, load=True) | |
| sell_custom_profit_under_rsi_diff_1 = DecimalParameter(0.0, 20.0, default=4.4, space='sell', optimize=False, load=True) | |
| sell_custom_stoploss_under_rel_1 = DecimalParameter(0.001, 0.02, default=0.004, space='sell', optimize=False, load=True) | |
| sell_custom_stoploss_under_rsi_diff_1 = DecimalParameter(0.0, 20.0, default=8.0, space='sell', optimize=False, load=True) | |
| ############################################################# | |
| def get_ticker_indicator(self): | |
| return int(self.timeframe[:-1]) | |
| def custom_sell(self, pair: str, trade: 'Trade', current_time: 'datetime', current_rate: float, | |
| current_profit: float, **kwargs): | |
| dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe) | |
| last_candle = dataframe.iloc[-1].squeeze() | |
| max_profit = ((trade.max_rate - trade.open_rate) / trade.open_rate) | |
| if (last_candle is not None): | |
| if (current_profit > self.sell_custom_profit_4.value) & (last_candle['rsi'] < self.sell_custom_rsi_4.value): | |
| return 'signal_profit_4' | |
| elif (current_profit > self.sell_custom_profit_3.value) & (last_candle['rsi'] < self.sell_custom_rsi_3.value): | |
| return 'signal_profit_3' | |
| elif (current_profit > self.sell_custom_profit_2.value) & (last_candle['rsi'] < self.sell_custom_rsi_2.value): | |
| return 'signal_profit_2' | |
| elif (current_profit > self.sell_custom_profit_1.value) & (last_candle['rsi'] < self.sell_custom_rsi_1.value): | |
| return 'signal_profit_1' | |
| elif (current_profit > self.sell_custom_profit_0.value) & (last_candle['rsi'] < self.sell_custom_rsi_0.value): | |
| return 'signal_profit_0' | |
| elif (current_profit > self.sell_custom_under_profit_1.value) & (last_candle['rsi'] < self.sell_custom_under_rsi_1.value) & (last_candle['close'] < last_candle['ema_200']): | |
| return 'signal_profit_u_1' | |
| elif (current_profit > self.sell_custom_under_profit_2.value) & (last_candle['rsi'] < self.sell_custom_under_rsi_2.value) & (last_candle['close'] < last_candle['ema_200']): | |
| return 'signal_profit_u_2' | |
| elif (current_profit > self.sell_custom_under_profit_3.value) & (last_candle['rsi'] < self.sell_custom_under_rsi_3.value) & (last_candle['close'] < last_candle['ema_200']): | |
| return 'signal_profit_u_3' | |
| elif (current_profit > self.sell_custom_dec_profit_1.value) & (last_candle['sma_200_dec']): | |
| return 'signal_profit_d_1' | |
| elif (current_profit > self.sell_custom_dec_profit_2.value) & (last_candle['close'] < last_candle['ema_100']): | |
| return 'signal_profit_d_2' | |
| elif (current_profit > self.sell_trail_profit_min_1.value) & (current_profit < self.sell_trail_profit_max_1.value) & (max_profit > (current_profit + self.sell_trail_down_1.value)): | |
| return 'signal_profit_t_1' | |
| elif (current_profit > self.sell_trail_profit_min_2.value) & (current_profit < self.sell_trail_profit_max_2.value) & (max_profit > (current_profit + self.sell_trail_down_2.value)): | |
| return 'signal_profit_t_2' | |
| elif (last_candle['close'] < last_candle['ema_200']) & (current_profit > self.sell_trail_profit_min_3.value) & (current_profit < self.sell_trail_profit_max_3.value) & (max_profit > (current_profit + self.sell_trail_down_3.value)): | |
| return 'signal_profit_u_t_1' | |
| elif (current_profit > 0.0) & (last_candle['close'] < last_candle['ema_200']) & (((last_candle['ema_200'] - last_candle['close']) / last_candle['close']) < self.sell_custom_profit_under_rel_1.value) & (last_candle['rsi'] > last_candle['rsi_1h'] + self.sell_custom_profit_under_rsi_diff_1.value): | |
| return 'signal_profit_u_e_1' | |
| elif (current_profit < -0.0) & (last_candle['close'] < last_candle['ema_200']) & (((last_candle['ema_200'] - last_candle['close']) / last_candle['close']) < self.sell_custom_stoploss_under_rel_1.value) & (last_candle['rsi'] > last_candle['rsi_1h'] + self.sell_custom_stoploss_under_rsi_diff_1.value): | |
| return 'signal_stoploss_u_1' | |
| return None | |
| def informative_pairs(self): | |
| # get access to all pairs available in whitelist. | |
| pairs = self.dp.current_whitelist() | |
| # Assign tf to each pair so they can be downloaded and cached for strategy. | |
| informative_pairs = [(pair, '1h') for pair in pairs] | |
| return informative_pairs | |
| def informative_1h_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame: | |
| assert self.dp, "DataProvider is required for multiple timeframes." | |
| # Get the informative pair | |
| informative_1h = self.dp.get_pair_dataframe(pair=metadata['pair'], timeframe=self.inf_1h) | |
| # EMA | |
| informative_1h['ema_15'] = ta.EMA(informative_1h, timeperiod=15) | |
| informative_1h['ema_50'] = ta.EMA(informative_1h, timeperiod=50) | |
| informative_1h['ema_100'] = ta.EMA(informative_1h, timeperiod=100) | |
| informative_1h['ema_200'] = ta.EMA(informative_1h, timeperiod=200) | |
| # SMA | |
| informative_1h['sma_200'] = ta.SMA(informative_1h, timeperiod=200) | |
| # RSI | |
| informative_1h['rsi'] = ta.RSI(informative_1h, timeperiod=14) | |
| # BB | |
| bollinger = qtpylib.bollinger_bands(qtpylib.typical_price(informative_1h), window=20, stds=2) | |
| informative_1h['bb_lowerband'] = bollinger['lower'] | |
| informative_1h['bb_middleband'] = bollinger['mid'] | |
| informative_1h['bb_upperband'] = bollinger['upper'] | |
| # Pump protections | |
| informative_1h['safe_pump_24'] = ((((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / informative_1h['close'].rolling(24).min()) < self.buy_pump_threshold_1.value) | (((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / self.buy_pump_pull_threshold_1.value) > (informative_1h['close'] - informative_1h['close'].rolling(24).min()))) | |
| informative_1h['safe_pump_36'] = ((((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / informative_1h['close'].rolling(36).min()) < self.buy_pump_threshold_2.value) | (((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / self.buy_pump_pull_threshold_2.value) > (informative_1h['close'] - informative_1h['close'].rolling(36).min()))) | |
| informative_1h['safe_pump_48'] = ((((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / informative_1h['close'].rolling(48).min()) < self.buy_pump_threshold_3.value) | (((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / self.buy_pump_pull_threshold_3.value) > (informative_1h['close'] - informative_1h['close'].rolling(48).min()))) | |
| informative_1h['safe_pump_24_strict'] = ((((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / informative_1h['close'].rolling(24).min()) < self.buy_pump_threshold_4.value) | (((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / self.buy_pump_pull_threshold_4.value) > (informative_1h['close'] - informative_1h['close'].rolling(24).min()))) | |
| informative_1h['safe_pump_36_strict'] = ((((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / informative_1h['close'].rolling(36).min()) < self.buy_pump_threshold_5.value) | (((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / self.buy_pump_pull_threshold_5.value) > (informative_1h['close'] - informative_1h['close'].rolling(36).min()))) | |
| informative_1h['safe_pump_48_strict'] = ((((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / informative_1h['close'].rolling(48).min()) < self.buy_pump_threshold_6.value) | (((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / self.buy_pump_pull_threshold_6.value) > (informative_1h['close'] - informative_1h['close'].rolling(48).min()))) | |
| informative_1h['safe_pump_24_loose'] = ((((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / informative_1h['close'].rolling(24).min()) < self.buy_pump_threshold_7.value) | (((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / self.buy_pump_pull_threshold_7.value) > (informative_1h['close'] - informative_1h['close'].rolling(24).min()))) | |
| informative_1h['safe_pump_36_loose'] = ((((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / informative_1h['close'].rolling(36).min()) < self.buy_pump_threshold_8.value) | (((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / self.buy_pump_pull_threshold_8.value) > (informative_1h['close'] - informative_1h['close'].rolling(36).min()))) | |
| informative_1h['safe_pump_48_loose'] = ((((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / informative_1h['close'].rolling(48).min()) < self.buy_pump_threshold_9.value) | (((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / self.buy_pump_pull_threshold_9.value) > (informative_1h['close'] - informative_1h['close'].rolling(48).min()))) | |
| return informative_1h | |
| def normal_tf_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame: | |
| # BB 40 | |
| bb_40 = qtpylib.bollinger_bands(dataframe['close'], window=40, stds=2) | |
| dataframe['lower'] = bb_40['lower'] | |
| dataframe['mid'] = bb_40['mid'] | |
| dataframe['bbdelta'] = (bb_40['mid'] - dataframe['lower']).abs() | |
| dataframe['closedelta'] = (dataframe['close'] - dataframe['close'].shift()).abs() | |
| dataframe['tail'] = (dataframe['close'] - dataframe['low']).abs() | |
| # BB 20 | |
| bollinger = qtpylib.bollinger_bands(qtpylib.typical_price(dataframe), window=20, stds=2) | |
| dataframe['bb_lowerband'] = bollinger['lower'] | |
| dataframe['bb_middleband'] = bollinger['mid'] | |
| dataframe['bb_upperband'] = bollinger['upper'] | |
| # EMA 200 | |
| dataframe['ema_12'] = ta.EMA(dataframe, timeperiod=12) | |
| dataframe['ema_20'] = ta.EMA(dataframe, timeperiod=20) | |
| dataframe['ema_26'] = ta.EMA(dataframe, timeperiod=26) | |
| dataframe['ema_50'] = ta.EMA(dataframe, timeperiod=50) | |
| dataframe['ema_100'] = ta.EMA(dataframe, timeperiod=100) | |
| dataframe['ema_200'] = ta.EMA(dataframe, timeperiod=200) | |
| # SMA | |
| dataframe['sma_5'] = ta.SMA(dataframe, timeperiod=5) | |
| dataframe['sma_30'] = ta.SMA(dataframe, timeperiod=30) | |
| dataframe['sma_200'] = ta.SMA(dataframe, timeperiod=200) | |
| dataframe['sma_200_dec'] = dataframe['sma_200'] < dataframe['sma_200'].shift(20) | |
| # MFI | |
| dataframe['mfi'] = ta.MFI(dataframe) | |
| # EWO | |
| dataframe['ewo'] = EWO(dataframe, self.fast_ewo.value, self.slow_ewo.value) | |
| # RSI | |
| dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14) | |
| # Chopiness | |
| dataframe['chop']= qtpylib.chopiness(dataframe, 14) | |
| # Dip protection | |
| dataframe['safe_dips'] = ((((dataframe['open'] - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_1.value) & | |
| (((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_2.value) & | |
| (((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_3.value) & | |
| (((dataframe['open'].rolling(144).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_4.value)) | |
| dataframe['safe_dips_strict'] = ((((dataframe['open'] - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_5.value) & | |
| (((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_6.value) & | |
| (((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_7.value) & | |
| (((dataframe['open'].rolling(144).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_8.value)) | |
| dataframe['safe_dips_loose'] = ((((dataframe['open'] - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_9.value) & | |
| (((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_10.value) & | |
| (((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_11.value) & | |
| (((dataframe['open'].rolling(144).max() - dataframe['close']) / dataframe['close']) < self.buy_dip_threshold_12.value)) | |
| # Volume | |
| dataframe['volume_mean_4'] = dataframe['volume'].rolling(4).mean().shift(1) | |
| dataframe['volume_mean_30'] = dataframe['volume'].rolling(30).mean() | |
| # Offset | |
| for i in self.ma_types: | |
| dataframe[f'{i}_offset_buy'] = self.ma_map[f'{i}']['calculate']( | |
| dataframe, self.base_nb_candles_buy.value) * \ | |
| self.ma_map[f'{i}']['low_offset'] | |
| dataframe[f'{i}_offset_sell'] = self.ma_map[f'{i}']['calculate']( | |
| dataframe, self.base_nb_candles_sell.value) * \ | |
| self.ma_map[f'{i}']['high_offset'] | |
| return dataframe | |
| def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame: | |
| # The indicators for the 1h informative timeframe | |
| informative_1h = self.informative_1h_indicators(dataframe, metadata) | |
| dataframe = merge_informative_pair(dataframe, informative_1h, self.timeframe, self.inf_1h, ffill=True) | |
| # The indicators for the normal (5m) timeframe | |
| dataframe = self.normal_tf_indicators(dataframe, metadata) | |
| return dataframe | |
| def populate_buy_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame: | |
| conditions = [] | |
| conditions.append( | |
| ( | |
| self.buy_condition_1_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['sma_200'] > dataframe['sma_200'].shift(50)) & | |
| (dataframe['safe_dips_strict']) & | |
| (dataframe['safe_pump_24_1h']) & | |
| (((dataframe['close'] - dataframe['open'].rolling(36).min()) / dataframe['open'].rolling(36).min()) > self.buy_min_inc_1.value) & | |
| (dataframe['rsi_1h'] > self.buy_rsi_1h_min_1.value) & | |
| (dataframe['rsi_1h'] < self.buy_rsi_1h_max_1.value) & | |
| (dataframe['rsi'] < self.buy_rsi_1.value) & | |
| (dataframe['mfi'] < self.buy_mfi_1.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_2_enable.value & | |
| (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(50)) & | |
| (dataframe['safe_pump_24_strict_1h']) & | |
| (dataframe['volume_mean_4'] * self.buy_volume_2.value > dataframe['volume']) & | |
| #(dataframe['rsi_1h'] > self.buy_rsi_1h_min_2.value) & | |
| #(dataframe['rsi_1h'] < self.buy_rsi_1h_max_2.value) & | |
| (dataframe['rsi'] < dataframe['rsi_1h'] - self.buy_rsi_1h_diff_2.value) & | |
| (dataframe['mfi'] < self.buy_mfi_2.value) & | |
| (dataframe['close'] < (dataframe['bb_lowerband'] * self.buy_bb_offset_2.value)) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_3_enable.value & | |
| (dataframe['close'] > (dataframe['ema_200_1h'] * self.buy_ema_rel_3.value)) & | |
| (dataframe['ema_100'] > dataframe['ema_200']) & | |
| (dataframe['ema_100_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_pump_36_strict_1h']) & | |
| dataframe['lower'].shift().gt(0) & | |
| dataframe['bbdelta'].gt(dataframe['close'] * self.buy_bb40_bbdelta_close_3.value) & | |
| dataframe['closedelta'].gt(dataframe['close'] * self.buy_bb40_closedelta_close_3.value) & | |
| dataframe['tail'].lt(dataframe['bbdelta'] * self.buy_bb40_tail_bbdelta_3.value) & | |
| dataframe['close'].lt(dataframe['lower'].shift()) & | |
| dataframe['close'].le(dataframe['close'].shift()) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_4_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips_strict']) & | |
| (dataframe['safe_pump_24_1h']) & | |
| (dataframe['close'] < dataframe['ema_50']) & | |
| (dataframe['close'] < self.buy_bb20_close_bblowerband_4.value * dataframe['bb_lowerband']) & | |
| (dataframe['volume'] < (dataframe['volume_mean_30'].shift(1) * self.buy_bb20_volume_4.value)) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_5_enable.value & | |
| (dataframe['ema_100'] > dataframe['ema_200']) & | |
| (dataframe['close'] > (dataframe['ema_200_1h'] * self.buy_ema_rel_5.value)) & | |
| (dataframe['safe_dips']) & | |
| (dataframe['safe_pump_36_strict_1h']) & | |
| (dataframe['ema_26'] > dataframe['ema_12']) & | |
| ((dataframe['ema_26'] - dataframe['ema_12']) > (dataframe['open'] * self.buy_ema_open_mult_5.value)) & | |
| ((dataframe['ema_26'].shift() - dataframe['ema_12'].shift()) > (dataframe['open'] / 100)) & | |
| (dataframe['close'] < (dataframe['bb_lowerband'] * self.buy_bb_offset_5.value)) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_6_enable.value & | |
| (dataframe['ema_100_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips_loose']) & | |
| (dataframe['safe_pump_36_strict_1h']) & | |
| (dataframe['ema_26'] > dataframe['ema_12']) & | |
| ((dataframe['ema_26'] - dataframe['ema_12']) > (dataframe['open'] * self.buy_ema_open_mult_6.value)) & | |
| ((dataframe['ema_26'].shift() - dataframe['ema_12'].shift()) > (dataframe['open'] / 100)) & | |
| (dataframe['close'] < (dataframe['bb_lowerband'] * self.buy_bb_offset_6.value)) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_7_enable.value & | |
| (dataframe['ema_100'] > dataframe['ema_200']) & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips_strict']) & | |
| (dataframe['volume'].rolling(4).mean() * self.buy_volume_7.value > dataframe['volume']) & | |
| (dataframe['ema_26'] > dataframe['ema_12']) & | |
| ((dataframe['ema_26'] - dataframe['ema_12']) > (dataframe['open'] * self.buy_ema_open_mult_7.value)) & | |
| ((dataframe['ema_26'].shift() - dataframe['ema_12'].shift()) > (dataframe['open'] / 100)) & | |
| (dataframe['rsi'] < self.buy_rsi_7.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_8_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips_loose']) & | |
| (dataframe['safe_pump_24_1h']) & | |
| (dataframe['rsi'] < self.buy_rsi_8.value) & | |
| (dataframe['volume'] > (dataframe['volume'].shift(1) * self.buy_volume_8.value)) & | |
| (dataframe['close'] > dataframe['open']) & | |
| ((dataframe['close'] - dataframe['low']) > ((dataframe['close'] - dataframe['open']) * self.buy_tail_diff_8.value)) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_9_enable.value & | |
| (dataframe['ema_50'] > dataframe['ema_200']) & | |
| (dataframe['ema_100'] > dataframe['ema_200']) & | |
| (dataframe['safe_dips_strict']) & | |
| (dataframe['safe_pump_24_loose_1h']) & | |
| (dataframe['volume_mean_4'] * self.buy_volume_9.value > dataframe['volume']) & | |
| (dataframe['close'] < dataframe['ema_20'] * self.buy_ma_offset_9.value) & | |
| (dataframe['close'] < dataframe['bb_lowerband'] * self.buy_bb_offset_9.value) & | |
| (dataframe['rsi_1h'] > self.buy_rsi_1h_min_9.value) & | |
| (dataframe['rsi_1h'] < self.buy_rsi_1h_max_9.value) & | |
| (dataframe['mfi'] < self.buy_mfi_9.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_10_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & | |
| (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(24)) & | |
| (dataframe['safe_dips_loose']) & | |
| (dataframe['safe_pump_24_loose_1h']) & | |
| ((dataframe['volume_mean_4'] * self.buy_volume_10.value) > dataframe['volume']) & | |
| (dataframe['close'] < dataframe['sma_30'] * self.buy_ma_offset_10.value) & | |
| (dataframe['close'] < dataframe['bb_lowerband'] * self.buy_bb_offset_10.value) & | |
| (dataframe['rsi_1h'] < self.buy_rsi_1h_10.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_11_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & | |
| (dataframe['safe_dips_loose']) & | |
| (dataframe['safe_pump_24_loose_1h']) & | |
| (dataframe['safe_pump_36_1h']) & | |
| (dataframe['safe_pump_48_loose_1h']) & | |
| (((dataframe['close'] - dataframe['open'].rolling(36).min()) / dataframe['open'].rolling(36).min()) > self.buy_min_inc_11.value) & | |
| (dataframe['close'] < dataframe['sma_30'] * self.buy_ma_offset_11.value) & | |
| (dataframe['rsi_1h'] > self.buy_rsi_1h_min_11.value) & | |
| (dataframe['rsi_1h'] < self.buy_rsi_1h_max_11.value) & | |
| (dataframe['rsi'] < self.buy_rsi_11.value) & | |
| (dataframe['mfi'] < self.buy_mfi_11.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_12_enable.value & | |
| (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(24)) & | |
| (dataframe['safe_dips_strict']) & | |
| (dataframe['safe_pump_24_1h']) & | |
| ((dataframe['volume_mean_4'] * self.buy_volume_12.value) > dataframe['volume']) & | |
| (dataframe['close'] < dataframe['sma_30'] * self.buy_ma_offset_12.value) & | |
| (dataframe['ewo'] > self.buy_ewo_12.value) & | |
| (dataframe['rsi'] < self.buy_rsi_12.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_13_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & | |
| (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(24)) & | |
| (dataframe['safe_dips_strict']) & | |
| (dataframe['safe_pump_24_loose_1h']) & | |
| (dataframe['safe_pump_36_loose_1h']) & | |
| ((dataframe['volume_mean_4'] * self.buy_volume_13.value) > dataframe['volume']) & | |
| (dataframe['close'] < dataframe['sma_30'] * self.buy_ma_offset_13.value) & | |
| (dataframe['ewo'] < self.buy_ewo_13.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_14_enable.value & | |
| (dataframe['sma_200'] > dataframe['sma_200'].shift(30)) & | |
| (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(50)) & | |
| (dataframe['safe_dips_loose']) & | |
| (dataframe['safe_pump_24_1h']) & | |
| (dataframe['volume_mean_4'] * self.buy_volume_14.value > dataframe['volume']) & | |
| (dataframe['ema_26'] > dataframe['ema_12']) & | |
| ((dataframe['ema_26'] - dataframe['ema_12']) > (dataframe['open'] * self.buy_ema_open_mult_14.value)) & | |
| ((dataframe['ema_26'].shift() - dataframe['ema_12'].shift()) > (dataframe['open'] / 100)) & | |
| (dataframe['close'] < (dataframe['bb_lowerband'] * self.buy_bb_offset_14.value)) & | |
| (dataframe['close'] < dataframe['ema_20'] * self.buy_ma_offset_14.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_15_enable.value & | |
| (dataframe['close'] > dataframe['ema_200_1h'] * self.buy_ema_rel_15.value) & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips']) & | |
| (dataframe['safe_pump_36_strict_1h']) & | |
| (dataframe['ema_26'] > dataframe['ema_12']) & | |
| ((dataframe['ema_26'] - dataframe['ema_12']) > (dataframe['open'] * self.buy_ema_open_mult_15.value)) & | |
| ((dataframe['ema_26'].shift() - dataframe['ema_12'].shift()) > (dataframe['open'] / 100)) & | |
| (dataframe['rsi'] < self.buy_rsi_15.value) & | |
| (dataframe['close'] < dataframe['ema_20'] * self.buy_ma_offset_15.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_16_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips_strict']) & | |
| (dataframe['safe_pump_24_strict_1h']) & | |
| ((dataframe['volume_mean_4'] * self.buy_volume_16.value) > dataframe['volume']) & | |
| (dataframe['close'] < dataframe['ema_20'] * self.buy_ma_offset_16.value) & | |
| (dataframe['ewo'] > self.buy_ewo_16.value) & | |
| (dataframe['rsi'] < self.buy_rsi_16.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_17_enable.value & | |
| (dataframe['safe_dips_strict']) & | |
| (dataframe['safe_pump_24_loose_1h']) & | |
| ((dataframe['volume_mean_4'] * self.buy_volume_17.value) > dataframe['volume']) & | |
| (dataframe['close'] < dataframe['ema_20'] * self.buy_ma_offset_17.value) & | |
| (dataframe['ewo'] < self.buy_ewo_17.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_18_enable.value & | |
| (dataframe['close'] > dataframe['ema_200_1h']) & | |
| (dataframe['ema_100'] > dataframe['ema_200']) & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['sma_200'] > dataframe['sma_200'].shift(20)) & | |
| (dataframe['sma_200'] > dataframe['sma_200'].shift(44)) & | |
| (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(36)) & | |
| (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(72)) & | |
| (dataframe['safe_dips']) & | |
| (dataframe['safe_pump_24_strict_1h']) & | |
| ((dataframe['volume_mean_4'] * self.buy_volume_18.value) > dataframe['volume']) & | |
| (dataframe['rsi'] < self.buy_rsi_18.value) & | |
| (dataframe['close'] < (dataframe['bb_lowerband'] * self.buy_bb_offset_18.value)) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_19_enable.value & | |
| (dataframe['ema_100_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['sma_200'] > dataframe['sma_200'].shift(36)) & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips']) & | |
| (dataframe['safe_pump_24_1h']) & | |
| (dataframe['close'].shift(1) > dataframe['ema_100_1h']) & | |
| (dataframe['low'] < dataframe['ema_100_1h']) & | |
| (dataframe['close'] > dataframe['ema_100_1h']) & | |
| (dataframe['rsi_1h'] > self.buy_rsi_1h_min_19.value) & | |
| (dataframe['chop'] < self.buy_chop_min_19.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_20_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips']) & | |
| (dataframe['safe_pump_24_loose_1h']) & | |
| ((dataframe['volume_mean_4'] * self.buy_volume_20.value) > dataframe['volume']) & | |
| (dataframe['rsi'] < self.buy_rsi_20.value) & | |
| (dataframe['rsi_1h'] < self.buy_rsi_1h_20.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.buy_condition_21_enable.value & | |
| (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & | |
| (dataframe['safe_dips_strict']) & | |
| ((dataframe['volume_mean_4'] * self.buy_volume_21.value) > dataframe['volume']) & | |
| (dataframe['rsi'] < self.buy_rsi_21.value) & | |
| (dataframe['rsi_1h'] < self.buy_rsi_1h_21.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| for i in self.ma_types: | |
| conditions.append( | |
| ( | |
| dataframe['close'] < dataframe[f'{i}_offset_buy']) & | |
| ( | |
| (dataframe['ewo'] < self.ewo_low.value) | | |
| (dataframe['ewo'] > self.ewo_high.value) | |
| ) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| if conditions: | |
| dataframe.loc[ | |
| reduce(lambda x, y: x | y, conditions), | |
| 'buy' | |
| ] = 1 | |
| return dataframe | |
| def populate_sell_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame: | |
| conditions = [] | |
| conditions.append( | |
| ( | |
| self.sell_condition_1_enable.value & | |
| (dataframe['rsi'] > self.sell_rsi_bb_1.value) & | |
| (dataframe['close'] > dataframe['bb_upperband']) & | |
| (dataframe['close'].shift(1) > dataframe['bb_upperband'].shift(1)) & | |
| (dataframe['close'].shift(2) > dataframe['bb_upperband'].shift(2)) & | |
| (dataframe['close'].shift(3) > dataframe['bb_upperband'].shift(3)) & | |
| (dataframe['close'].shift(4) > dataframe['bb_upperband'].shift(4)) & | |
| (dataframe['close'].shift(5) > dataframe['bb_upperband'].shift(5)) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.sell_condition_2_enable.value & | |
| (dataframe['rsi'] > self.sell_rsi_bb_2.value) & | |
| (dataframe['close'] > dataframe['bb_upperband']) & | |
| (dataframe['close'].shift(1) > dataframe['bb_upperband'].shift(1)) & | |
| (dataframe['close'].shift(2) > dataframe['bb_upperband'].shift(2)) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.sell_condition_3_enable.value & | |
| (dataframe['rsi'] > self.sell_rsi_main_3.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.sell_condition_4_enable.value & | |
| (dataframe['rsi'] > self.sell_dual_rsi_rsi_4.value) & | |
| (dataframe['rsi_1h'] > self.sell_dual_rsi_rsi_1h_4.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.sell_condition_6_enable.value & | |
| (dataframe['close'] < dataframe['ema_200']) & | |
| (dataframe['close'] > dataframe['ema_50']) & | |
| (dataframe['rsi'] > self.sell_rsi_under_6.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.sell_condition_7_enable.value & | |
| (dataframe['rsi_1h'] > self.sell_rsi_1h_7.value) & | |
| qtpylib.crossed_below(dataframe['ema_12'], dataframe['ema_26']) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| conditions.append( | |
| ( | |
| self.sell_condition_8_enable.value & | |
| (dataframe['close'] > dataframe['bb_upperband_1h'] * self.sell_bb_relative_8.value) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| for i in self.ma_types: | |
| conditions.append( | |
| ( | |
| (dataframe['close'] > dataframe[f'{i}_offset_sell']) & | |
| (dataframe['volume'] > 0) | |
| ) | |
| ) | |
| if conditions: | |
| dataframe.loc[ | |
| reduce(lambda x, y: x | y, conditions), | |
| 'sell' | |
| ] = 1 | |
| return dataframe | |
| # Elliot Wave Oscillator | |
| def EWO(dataframe, sma1_length=5, sma2_length=35): | |
| df = dataframe.copy() | |
| sma1 = ta.EMA(df, timeperiod=sma1_length) | |
| sma2 = ta.EMA(df, timeperiod=sma2_length) | |
| smadif = (sma1 - sma2) / df['close'] * 100 | |
| return smadif |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment