Created
July 16, 2014 13:50
-
-
Save luftreich/99bfe877604846fa427b to your computer and use it in GitHub Desktop.
tmp_uImage_bootm_ddr
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
m6_mbx_th10>mmcino fo | |
Device: SDIO Port B | |
Manufacturer ID: 0 | |
OEM: 0 | |
Name: Tran Speed: 40000000 | |
Rd Block Len: 512 | |
SD version 2.0 | |
High Capacity: Yes | |
Capacity: 3965190144 | |
Boot Part Size: 0 | |
Bus Width: 4-bit | |
m6_mbx_th10>fatl | |
fatload fatls | |
m6_mbx_th10>fatload mmc 0 82000000 uImage | |
reading uImage | |
3338206 bytes read | |
m6_mbx_th10>bootm | |
## Booting kernel from Legacy Image at 82000000 ... | |
Image Name: Linux-3.0.50-00011-ge0ff081-dirt | |
Image Type: ARM Linux Kernel Image (lzma compressed) | |
Data Size: 3338142 Bytes = 3.2 MiB | |
Load Address: 80008000 | |
Entry Point: 80008000 | |
Verifying Checksum ... OK | |
Uncompressing Kernel Image ... OK | |
machid from environment: 0x4e27 | |
EFUSE machid is not set. | |
Using machid 0x4e27 from environment | |
Starting kernel ... | |
[ 0.000000@0] Initializing cgroup subsys cpu | |
[ 0.000000@0] Linux version 3.0.50-00011-ge0ff081-dirty (user@Luftriech) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 SMP PREEMPT Wed Jul 16 16:31:57 HKT 2014 | |
[ 0.000000@0] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
[ 0.000000@0] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000@0] Machine: Amlogic Meson6 g02 customer platform | |
[ 0.000000@0] Ignoring unrecognised tag 0x00000000 | |
[ 0.000000@0] early_mem:528: start=0x80000000, size=0x4000000 | |
[ 0.000000@0] early_mem:546: start=0x92b00000, size=0xd400000 | |
[ 0.000000@0] early_mem:554: start=0xa0000000, size=0x20000000 | |
[ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc | |
[ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c1223000 s5600 r8192 d14880 u32768 | |
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 199680 | |
[ 0.000000@0] Kernel command line: root=/dev/cardblksd2 rw rootfstype=ext3 rootwait init=/init console=ttyS0,115200n8 nohlt vmalloc=256m mem=1024m logo=osd1,0x84100000,720p | |
[ 0.000000@0] osd1:1 | |
[ 0.000000@0] 720p:6 | |
[ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ 0.000000@0] Memory: 64MB 212MB 512MB = 788MB total | |
[ 0.000000@0] Memory: 789724k/789724k available, 17188k reserved, 524288K highmem | |
[ 0.000000@0] Virtual kernel memory layout: | |
[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
[ 0.000000@0] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) | |
[ 0.000000@0] vmalloc : 0xe0000000 - 0xf0000000 ( 256 MB) | |
[ 0.000000@0] lowmem : 0xc0000000 - 0xdff00000 ( 511 MB) | |
[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
[ 0.000000@0] .init : 0xc0008000 - 0xc0036000 ( 184 kB) | |
[ 0.000000@0] .text : 0xc0036000 - 0xc0820a24 (8107 kB) | |
[ 0.000000@0] .data : 0xc0822000 - 0xc087d680 ( 366 kB) | |
[ 0.000000@0] .bss : 0xc087d6a4 - 0xc0a19a98 (1649 kB) | |
[ 0.000000@0] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000@0] Preemptible hierarchical RCU implementation. | |
[ 0.000000@0] RCU debugfs-based tracing is enabled. | |
[ 0.000000@0] NR_IRQS:256 | |
[ 0.000000@0] gic_init: irq_offset=0 | |
[ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms | |
[ 0.000000@0] MESON TIMER-A c0835ec0 | |
[ 0.000000@0] Disable timerA | |
[ 0.000000@0] Console: colour dummy device 80x30 | |
[ 0.000000@0] console [ttyS0] enabled | |
[ 0.246031@0] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744) | |
[ 0.300054@0] pid_max: default: 32768 minimum: 301 | |
[ 0.302263@0] Mount-cache hash table entries: 512 | |
[ 0.307494@0] Initializing cgroup subsys cpuacct | |
[ 0.311423@0] Initializing cgroup subsys freezer | |
[ 0.315998@0] CPU: Testing write buffer coherency: ok | |
[ 0.321173@0] MESON TIMER-B c0835f80 | |
[ 0.324538@0] Disable timerA | |
[ 0.327392@0] Disable timerB | |
[ 0.330263@0] Disable timerA | |
[ 0.333253@0] L310 cache controller enabled | |
[ 0.337291@0] l2x0: 8 ways, CACHE_ID 0x4100a0c8, AUX_CTRL 0x7e462c01, Cache size: 524288 B | |
[ 0.345586@0] prefetch=0x31000006 | |
[ 0.348918@0] ===actlr=0x41 | |
[ 0.351702@0] ===actlr=0x4b | |
[ 0.354473@0] SCU_CTRL: scu_ctrl=0x69 | |
[ 0.358118@0] pl310: aux=0x7e462c01, prefetch=0x31000006 | |
[ 0.461480@1] CPU1: Booted secondary processor | |
[ 0.521196@1] MESON TIMER-D c0836100 | |
[ 0.521224@0] Brought up 2 CPUs | |
[ 0.521232@0] SMP: Total of 2 processors activated (4780.85 BogoMIPS). | |
[ 0.533189@1] Disable timerD | |
[ 0.536211@0] devtmpfs: initialized | |
[ 0.543304@0] clkrate [ xtal ] : 24000000 | |
[ 0.543517@0] clkrate [ pll_sys ] : 1200000000 | |
[ 0.547943@0] clkrate [ pll_fixed ] : 2000000000 | |
[ 0.552559@0] clkrate [ pll_vid2 ] : 378000000 | |
[ 0.556970@0] clkrate [ pll_hpll ] : 378000000 | |
[ 0.561469@0] clkrate [ pll_ddr ] : 444000000 | |
[ 0.565737@0] clkrate [ a9_clk ] : 1200000000 | |
[ 0.570141@0] clkrate [ clk81 ] : 200000000 | |
[ 0.574345@0] clkrate [ usb0 ] : 0 | |
[ 0.577724@0] clkrate [ usb1 ] : 0 | |
[ 0.582023@0] print_constraints: dummy: | |
[ 0.585061@0] NET: Registered protocol family 16 | |
[ 0.590389@0] ***vcck: vcck_pwm_initregister lm device 0 | |
[ 0.594912@0] register lm device 1 | |
[ 0.600945@0] usb_wifi_power Off | |
[ 0.601566@0] chip version=ffffffff | |
[ 0.604979@0] vdac_switch_init_module | |
[ 0.608568@0] vdac_switch mode = 0 | |
[ 0.612101@0] tv_init_module | |
[ 0.614782@0] major number 254 for disp | |
[ 0.618683@0] vout_register_server | |
[ 0.622079@0] register tv module server ok | |
[ 0.626438@0] /work/project/aml8726/amlogic_android/common/drivers/amlogic/i2c/aml_i2c.c : aml_i2c_init | |
[ 0.635742@0] /work/project/aml8726/amlogic_android/common/drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe | |
[ 0.645170@0] master_no = 0, resource = c0873ffc, maseter_regs=f1108500 | |
[ 0.651908@0] aml-i2c aml-i2c.0: add adapter aml_i2c_adap0(df811828) | |
[ 0.658092@0] aml-i2c aml-i2c.0: aml i2c bus driver. | |
[ 0.663140@0] /work/project/aml8726/amlogic_android/common/drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe | |
[ 0.672511@0] master_no = 1, resource = c0874054, maseter_regs=f11087c0 | |
[ 0.679203@0] aml-i2c aml-i2c.1: add adapter aml_i2c_adap1(df812028) | |
[ 0.685443@0] aml-i2c aml-i2c.1: aml i2c bus driver. | |
[ 0.690470@0] /work/project/aml8726/amlogic_android/common/drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe | |
[ 0.699853@0] master_no = 2, resource = c08740ac, maseter_regs=f3100500 | |
[ 0.706543@0] aml-i2c aml-i2c.2: add adapter aml_i2c_adap2(df812828) | |
[ 0.712785@0] aml-i2c aml-i2c.2: aml i2c bus driver. | |
[ 0.717884@0] HDMI DEBUG: amhdmitx_init [1858] | |
[ 0.722159@0] HDMI Ver: 2013Aug25a | |
[ 0.725550@0] HDMI DEBUG: amhdmitx_probe [1658] | |
[ 0.730342@1] Set HDMI:Chip C | |
[ 0.733017@1] HDMI DEBUG: HDMITX_M1B_Init [3483] | |
[ 0.737602@1] HDMI DEBUG: HDMITX_M1B_Init [3486] | |
[ 0.742215@1] HDMI DEBUG: hdmi_hw_init [1249] | |
[ 0.742219@0] HDMI: get hdmi platform data | |
[ 0.742225@0] HDMI 5V Power On | |
[ 0.744381@0] ------------[ cut here ]------------ | |
[ 0.744404@0] WARNING: at /work/project/aml8726/amlogic_android/common/fs/sysfs/dir.c:455 sysfs_add_one+0x88/0xbc() | |
[ 0.744412@0] sysfs: cannot create duplicate filename '/module/hdmitx/version' | |
[ 0.744418@0] Modules linked in: | |
[ 0.744457@0] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c0060ee0>] (warn_slowpath_common+0x4c/0x64) | |
[ 0.744472@0] [<c0060ee0>] (warn_slowpath_common+0x4c/0x64) from [<c0060f8c>] (warn_slowpath_fmt+0x30/0x40) | |
[ 0.744484@0] [<c0060f8c>] (warn_slowpath_fmt+0x30/0x40) from [<c0120908>] (sysfs_add_one+0x88/0xbc) | |
[ 0.744506@0] [<c0120908>] (sysfs_add_one+0x88/0xbc) from [<c011fa4c>] (sysfs_add_file_mode+0x4c/0x9c) | |
[ 0.744531@0] [<c011fa4c>] (sysfs_add_file_mode+0x4c/0x9c) from [<c000fa64>] (param_sysfs_init+0x70/0x1b0) | |
[ 0.744551@0] [<c000fa64>] (param_sysfs_init+0x70/0x1b0) from [<c003670c>] (do_one_initcall+0xfc/0x164) | |
[ 0.744565@0] [<c003670c>] (do_one_initcall+0xfc/0x164) from [<c0008988>] (kernel_init+0x98/0x13c) | |
[ 0.744584@0] [<c0008988>] (kernel_init+0x98/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 0.744608@0] ---[ end trace 1b75b31a2719ed1c ]--- | |
[ 0.795883@0] bio: create slab <bio-0> at 0 | |
[ 0.796942@0] SCSI subsystem initialized | |
[ 0.797263@0] usbcore: registered new interface driver usbfs | |
[ 0.797563@0] usbcore: registered new interface driver hub | |
[ 0.797732@0] usbcore: registered new device driver usb | |
[ 0.798422@0] tvoutc_setmode[267] | |
[ 0.798427@0] mode is: 1 | |
[ 0.798432@0] VPU_VIU_VENC_MUX_CTRL: 0x5 | |
[ 0.798436@0] viu chan = 1 | |
[ 0.798439@0] VPU_VIU_VENC_MUX_CTRL: 0x5 | |
[ 0.801062@0] print_constraints: vcck: 1070 <--> 1330 mV at 1330 mV | |
[ 0.801675@0] Advanced Linux Sound Architecture Driver Version 1.0.24. | |
[ 0.803376@0] Switching to clocksource Timer-E | |
[ 0.916656@0] cfg80211: Calling CRDA to update world regulatory domain | |
[ 0.916958@1] HDMI: get brd phy data | |
[ 0.916964@1] hdmi phy setting | |
[ 0.917014@1] HDMI: get brd phy data | |
[ 0.917018@1] hdmi phy setting | |
[ 0.917417@1] HDMI: reset intr mask | |
[ 0.921231@1] Switched to NOHz mode on CPU #1 | |
[ 0.936662@1] HDMI DEBUG: hdmi_task_handle [1260] | |
[ 0.948802@0] Switched to NOHz mode on CPU #0 | |
[ 0.964004@0] NET: Registered protocol family 2 | |
[ 0.964137@0] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) | |
[ 0.972018@0] TCP established hash table entries: 65536 (order: 7, 524288 bytes) | |
[ 0.978180@0] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) | |
[ 0.984956@0] TCP: Hash tables configured (established 65536 bind 65536) | |
[ 0.990958@0] TCP reno registered | |
[ 0.994233@0] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ 1.000505@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ 1.006912@0] NET: Registered protocol family 1 | |
[ 1.012364@0] highmem bounce pool size: 64 pages | |
[ 1.016022@0] ashmem: initialized | |
[ 1.029772@0] NTFS driver 2.1.30 [Flags: R/O]. | |
[ 1.030173@0] fuse init (API version 7.16) | |
[ 1.033291@0] msgmni has been set to 518 | |
[ 1.037769@0] io scheduler noop registered | |
[ 1.040637@0] io scheduler deadline registered (default) | |
[ 1.204744@0] loop: module loaded | |
[ 1.207310@0] tun: Universal TUN/TAP device driver, 1.6 | |
[ 1.207622@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
[ 1.214542@0] usbcore: registered new interface driver asix | |
[ 1.219634@0] usbcore: registered new interface driver cdc_ether | |
[ 1.225593@0] usbcore: registered new interface driver net1080 | |
[ 1.231427@0] usbcore: registered new interface driver cdc_subset | |
[ 1.237538@0] usbcore: registered new interface driver zaurus | |
[ 1.243136@0] cdc_ncm: 04-Aug-2011 | |
[ 1.246606@0] usbcore: registered new interface driver cdc_ncm | |
[ 1.252443@0] usbcore: registered new interface driver qf9700 | |
[ 1.258160@0] usbcore: registered new interface driver sr9600 | |
[ 1.264128@0] usbcore: registered new interface driver cdc_acm | |
[ 1.269610@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
[ 1.277765@0] Initializing USB Mass Storage driver... | |
[ 1.282909@0] usbcore: registered new interface driver usb-storage | |
[ 1.288964@0] USB Mass Storage support registered. | |
[ 1.293972@0] usbcore: registered new interface driver usbserial | |
[ 1.299727@0] usbserial: USB Serial Driver core | |
[ 1.304322@0] USB Serial support registered for GSM modem (1-port) | |
[ 1.310512@0] usbcore: registered new interface driver option | |
[ 1.316122@0] option: v0.7.2:USB Driver for GSM modems | |
[ 1.322000@0] mousedev: PS/2 mouse device common for all mice | |
[ 1.328233@0] usbcore: registered new interface driver iforce | |
[ 1.333820@0] usbcore: registered new interface driver xpad | |
[ 1.339213@0] i2c /dev entries driver | |
[ 1.342978@0] lirc_dev: IR Remote Control driver registered, major 250 | |
[ 1.348516@0] IR NEC protocol handler initialized | |
[ 1.353185@0] IR RC5(x) protocol handler initialized | |
[ 1.358149@0] IR RC6 protocol handler initialized | |
[ 1.362820@0] IR JVC protocol handler initialized | |
[ 1.367515@0] IR Sony protocol handler initialized | |
[ 1.372281@0] IR RC5 (streamzap) protocol handler initialized | |
[ 1.378018@0] IR LIRC bridge handler initialized | |
[ 1.382610@0] Linux video capture interface: v2.00 | |
[ 1.387627@0] usbcore: registered new interface driver uvcvideo | |
[ 1.393286@0] USB Video Class driver (v1.1.0) | |
[ 1.398449@0] device-mapper: uevent: version 1.0.3 | |
[ 1.403042@0] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com | |
[ 1.411303@0] cpuidle: using governor ladder | |
[ 1.415248@0] cpuidle: using governor menu | |
[ 1.419787@0] usbcore: registered new interface driver usbhid | |
[ 1.425055@0] usbhid: USB HID core driver | |
[ 1.429841@0] logger: created 256K log 'log_main' | |
[ 1.433980@0] logger: created 256K log 'log_events' | |
[ 1.438875@0] logger: created 256K log 'log_radio' | |
[ 1.443629@0] logger: created 256K log 'log_system' | |
[ 1.448359@0] vout_init_module | |
[ 1.451308@0] start init vout module | |
[ 1.455095@0] create vout attribute ok | |
[ 1.459114@0] ge2d_init | |
[ 1.461431@0] ge2d_dev major:249 | |
[ 1.465171@0] ge2d start monitor | |
[ 1.468087@0] osd_init | |
[ 1.468092@1] ge2d workqueue monitor start | |
[ 1.474563@0] vmode has setted in aml logo module | |
[ 1.479335@0] request_fiq:152: fiq=35 | |
[ 1.482960@0] request_fiq:186: end | |
[ 1.486343@0] [osd0] 0x84100000-0x850fffff | |
[ 1.490655@0] Frame buffer memory assigned at phy:0x84100000, vir:0xe1000000, size=16384K | |
[ 1.498587@0] ---------------clear framebuffer0 memory | |
[ 1.515903@0] [osd1] 0x85100000-0x851fffff | |
[ 1.515953@0] Frame buffer memory assigned at phy:0x85100000, vir:0xe0200000, size=1024K | |
[ 1.522444@0] ---------------clear framebuffer1 memory | |
[ 1.549212@0] osd probe ok | |
[ 1.552386@0] amlvideo-000: V4L2 device registered as video10 | |
[ 1.553148@0] set pinmux c0874478 | |
[ 1.586693@0] UART_ttyS0:(irq = 122) | |
[ 1.586841@0] dwc_otg: version 2.94a 05-DEC-2012 | |
[ 2.089079@0] USB (0) use clock source: XTAL input | |
[ 2.290128@0] Core Release: 2.94a | |
[ 2.290152@0] Setting default values for core params | |
[ 2.692764@0] Using Buffer DMA mode | |
[ 2.692786@0] OTG VER PARAM: 1, OTG VER FLAG: 1 | |
[ 2.695123@0] Working on port type = OTG | |
[ 2.699050@0] Current port type: SLAVE | |
[ 2.702815@0] dwc_otg lm0: DWC OTG Controller | |
[ 2.707205@0] dwc_otg lm0: new USB bus registered, assigned bus number 1 | |
[ 2.713818@0] dwc_otg lm0: irq 62, io mem 0x00000000 | |
[ 2.719598@0] hub 1-0:1.0: USB hub found | |
[ 2.722648@0] hub 1-0:1.0: 1 port detected | |
[ 2.727032@0] Dedicated Tx FIFOs mode | |
[ 2.730493@0] using timer detect id change, df9b2800 | |
[ 2.935427@0] Core Release: 2.94a | |
[ 2.935449@0] Setting default values for core params | |
[ 3.338110@0] Using Buffer DMA mode | |
[ 3.338132@0] OTG VER PARAM: 1, OTG VER FLAG: 1 | |
[ 3.340463@0] Working on port type = HOST | |
[ 3.344503@0] dwc_otg lm1: DWC OTG Controller | |
[ 3.348849@0] dwc_otg lm1: new USB bus registered, assigned bus number 2 | |
[ 3.355505@0] dwc_otg lm1: irq 63, io mem 0x00000000 | |
[ 3.363514@0] Init: Port Power? op_state=1 | |
[ 3.364506@0] Init: Power Port (0) | |
[ 3.368721@0] hub 2-0:1.0: USB hub found | |
[ 3.371808@0] hub 2-0:1.0: 1 port detected | |
[ 3.376226@0] Amlogic nand flash Kernel driver, Version K1.06.018 (c) 2010 Amlogic Inc. | |
[ 3.383906@0] ####Version of Uboot must be newer than U1.06.011!!!!! | |
[ 3.390357@0] 2 | |
[ 3.392024@0] SPI BOOT, m3_nand_probe continue i 0 | |
[ 3.396825@0] chip->controller=c09ea61c | |
[ 3.400615@0] checking ChiprevD :0 | |
[ 3.404000@0] aml_nand_probe checked chiprev:0 | |
[ 3.408462@0] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.0ns | |
[ 3.417044@0] No NAND device found. | |
[ 3.420299@0] NAND device id: 2c 44 44 4b a9 0 | |
[ 3.424580@0] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron D revision NAND 4GiB MT29F32G08CBADA) | |
[ 3.434657@0] #####aml_nand_init, with RB pins and chip->chip_delay:20 | |
[ 3.441008@0] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.0ns | |
[ 3.448377@0] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH40_1K_MODE | |
[ 3.458879@0] aml_chip->oob_fill_cnt =168,aml_chip->oob_size =744,bch_bytes =70 | |
[ 3.466150@0] multi plane error for selected plane mode: NAND_TWO_PLANE_MODE force plane to : NAND_SINGLE_PLANE_MODE | |
[ 3.476705@0] oob layout use nand base oob layout oobsize = 16,oobmul =1,mtd->oobsize =744,aml_chip->oob_size =744 | |
[ 3.491642@0] aml nand env valid addr: 8000 | |
[ 3.523947@0] nand env: nand_env_probe. | |
[ 3.524591@0] nand key: nand_key_probe. | |
[ 3.526136@0] key start_blk=2040,end_blk=2047,aml_nand_key_init:651 | |
[ 3.536788@0] aml nand key valid addr: ff000000 | |
[ 3.536977@0] aml nand key valid addr: ff200000 | |
[ 3.541577@0] aml nand key valid addr: ff400000 | |
[ 3.546177@0] aml nand key valid addr: ff600000 | |
[ 3.550844@0] i=0,register --- nand_key NAND bbt detect Bad block at 0 | |
[ 3.557555@0] Creating 8 MTD partitions on "D revision NAND 4GiB MT29F32G08CBADA": | |
[ 3.564932@0] 0x000000800000-0x000001000000 : "logo" | |
[ 3.571189@0] 0x000001000000-0x000001800000 : "aml_logo" | |
[ 3.576227@0] 0x000001800000-0x000002000000 : "recovery" | |
[ 3.581583@0] 0x000002000000-0x000002800000 : "boot" | |
[ 3.586482@0] 0x000002800000-0x000042800000 : "system" | |
[ 3.591699@0] 0x000042800000-0x000062800000 : "cache" | |
[ 3.596729@0] 0x000062800000-0x000072800000 : "backup" | |
[ 3.601838@0] 0x000072800000-0x0000ff000000 : "data" | |
[ 3.606961@0] init_aml_nftl start | |
[ 3.608941@0] mtd->name: system | |
[ 3.612064@0] nftl version 140429a | |
[ 3.615492@0] nftl part attr 0 | |
[ 3.618584@0] nftl start:512,64 | |
[ 3.622699@0] first | |
[ 3.773788@0] average_erase_count:0 | |
[ 3.773818@0] second 0,448 | |
[ 3.774325@0] all block full!! | |
[ 3.777396@0] free block cnt = 512 | |
[ 3.780748@0] new current block is 511 | |
[ 3.784479@0] nftl ok! | |
[ 3.787241@0] aml_nftl_blk->mbd.tr.name =system | |
[ 3.792024@1] aml_nftl_init_bounce_buf, use cache here | |
[ 3.796529@0] system: unknown partition table | |
[ 3.801196@0] _nftl_init_bounce_buf already init 1000 | |
[ 3.805920@0] aml_nftl_add_mtd ok | |
[ 3.809255@0] mtd->name: cache | |
[ 3.812262@0] nftl version 140429a | |
[ 3.815665@0] nftl part attr 0 | |
[ 3.818745@0] nftl start:256,32 | |
[ 3.822356@0] first | |
[ 3.898945@0] average_erase_count:0 | |
[ 3.898969@0] second 0,224 | |
[ 3.899483@0] all block full!! | |
[ 3.902522@0] free block cnt = 256 | |
[ 3.905906@0] new current block is 255 | |
[ 3.909661@0] nftl ok! | |
[ 3.912353@0] aml_nftl_blk->mbd.tr.name =cache | |
[ 3.917097@1] aml_nftl_init_bounce_buf, use cache here | |
[ 3.921591@0] cache: unknown partition table | |
[ 3.926128@0] _nftl_init_bounce_buf already init 1000 | |
[ 3.930963@0] aml_nftl_add_mtd ok | |
[ 3.934205@0] mtd->name: backup | |
[ 3.937361@0] nftl version 140429a | |
[ 3.940725@0] nftl part attr 0 | |
[ 3.943768@0] nftl start:128,16 | |
[ 3.947162@0] first | |
[ 3.986481@0] average_erase_count:0 | |
[ 3.986503@0] second 0,112 | |
[ 3.987043@0] all block full!! | |
[ 3.990052@0] free block cnt = 128 | |
[ 3.993436@0] new current block is 127 | |
[ 3.997195@0] nftl ok! | |
[ 3.999828@0] aml_nftl_blk->mbd.tr.name =backup | |
[ 4.004644@1] aml_nftl_init_bounce_buf, use cache here | |
[ 4.009220@0] backup: unknown partition table | |
[ 4.013843@0] _nftl_init_bounce_buf already init 1000 | |
[ 4.018654@0] aml_nftl_add_mtd ok | |
[ 4.021907@0] mtd->name: data | |
[ 4.024862@0] nftl version 140429a | |
[ 4.028383@0] nftl part attr 0 | |
[ 4.031403@0] nftl start:1124,140 | |
[ 4.036554@0] first | |
[ 4.366042@0] average_erase_count:0 | |
[ 4.366089@0] second 0,984 | |
[ 4.366580@0] all block full!! | |
[ 4.369667@0] free block cnt = 1124 | |
[ 4.373090@0] new current block is 1123 | |
[ 4.376932@0] nftl ok! | |
[ 4.379634@0] aml_nftl_blk->mbd.tr.name =data | |
[ 4.384239@1] aml_nftl_init_bounce_buf, use cache here | |
[ 4.388783@0] data: unknown partition table | |
[ 4.393240@0] _nftl_init_bounce_buf already init 1000 | |
[ 4.398048@0] aml_nftl_add_mtd ok | |
[ 4.401301@0] init_aml_nftl end | |
[ 4.404428@0] ethernetinit(dbg[c08680b4]=1) | |
[ 4.408649@0] ethernet base addr is f3610000 | |
[ 4.412886@0] set_phy_mode() phy_Identifier: 0xffffffff | |
[ 4.418212@0] ethernet: MII PHY 0007c0f1h found at address 1, status 0x7809 advertising 01e1. | |
[ 4.426578@0] find phy phy_Identifier=ffffffff | |
[ 4.431013@0] *****WARNING: Haven't setup MAC address! Using random MAC address. | |
[ 4.438392@0] mac-addr: 0:89:45:94:b:90 | |
[ 4.442181@0] write mac add to:dfa1f7c8: 00 89 45 94 0b 90 |..E...| | |
[ 4.448856@0] eth0: mixed no checksumming and other settings. | |
[ 4.454558@0] Amlogic A/V streaming port init | |
[ 4.461950@1] regist mpeg12 codec profile | |
[ 4.462590@1] regist mpeg4 codec profile | |
[ 4.466399@1] amvdec_vc1 module init | |
[ 4.470084@1] regist vc1 codec profile | |
[ 4.473690@1] amvdec_h264 module init | |
[ 4.477466@1] regist h264 codec profile | |
[ 4.481154@1] amvdec_h264mvc module init | |
[ 4.485245@1] regist mjpeg codec profile | |
[ 4.489001@1] amvdec_real module init | |
[ 4.492715@1] regist real codec profile | |
[ 4.497556@1] request_fiq:152: fiq=35 | |
[ 4.500079@1] request_fiq:186: end | |
[ 4.503709@1] Remote Driver | |
[ 4.506598@1] input: aml_keypad as /devices/platform/meson-remote/input/input0 | |
[ 4.514177@1] meson_remote_pinmux_setup() | |
[ 4.517455@1] Remote platform_data g_remote_base=f3100480 | |
[ 4.522820@1] Remote date_valye======0,status == 8915d20 | |
[ 4.528151@1] remote config major:245 | |
[ 4.532303@1] physical address:0x9fbe6000 | |
[ 4.536323@1] spi_nor_probe 588 | |
[ 4.539066@1] SPI BOOT : spi_nor_probe 593 | |
[ 4.543325@1] spi_nor apollospi:0: mx25l3205d (4096 Kbytes) | |
[ 4.548870@1] Creating 2 MTD partitions on "apollospi:0": | |
[ 4.554246@1] 0x000000000000-0x000000060000 : "bootloader" | |
[ 4.560988@1] 0x000000080000-0x000000088000 : "ubootenv" | |
[ 4.566598@1] Memory Card media Major: 253 | |
[ 4.569262@1] card max_req_size is 128K | |
[ 4.573682@1] card creat process sucessful | |
[ 4.577124@1] | |
[ 4.577127@1] SD/MMC initialization started...... | |
[ 5.216659@1] mmc data3 pull high | |
[ 5.216878@0] sd_mmc_info->card_type=0 | |
[ 5.218061@0] begin SDIO check ...... | |
[ 5.244278@0] sdio_timeout_int_times = 0; timeout = 498 | |
[ 5.266875@0] sdio_timeout_int_times = 0; timeout = 497 | |
[ 5.266902@0] SEND OP timeout @1 | |
[ 5.269663@0] mmc data3 pull high | |
[ 5.273152@0] begin SD&SDHC check ...... | |
[ 5.319232@0] sdio_timeout_int_times = 0; timeout = 498 | |
[ 5.319259@0] SEND IF timeout @2 | |
[ 5.344777@0] sdio_timeout_int_times = 0; timeout = 498 | |
[ 5.344804@0] begin MMC check ...... | |
[ 5.389235@0] sdio_timeout_int_times = 0; timeout = 498 | |
[ 5.389262@0] No any SD/MMC card detected! | |
[ 5.392896@0] #SD_MMC_ERROR_DRIVER_FAILURE error occured in sd_voltage_validation() | |
[ 5.400567@0] | |
[ 5.400570@0] SD/MMC initialization started...... | |
[ 5.406894@0] [card_force_init] unit_state 3 | |
[ 5.411278@0] [dsp]DSP start addr 0xc4000000 | |
[ 5.415404@0] [dsp]register dsp to char divece(232) | |
[ 5.424525@0] DSP pcmenc stream buffer to [0x9e001000-0x9e201000] | |
[ 5.426313@0] amlogic audio dsp pcmenc device init! | |
[ 5.431814@0] amlogic audio spdif interface device init! | |
[ 5.437626@0] using rtc device, aml_rtc, for alarms | |
[ 5.441181@0] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0 | |
[ 5.448474@0] efuse=========================================== | |
[ 5.453902@0] efuse: device efuse created | |
[ 5.457564@0] efuse-------------------------------------------- | |
[ 5.463336@0] keys=========================================== | |
[ 5.469074@0] keys_devno=f100000 | |
[ 5.472700@0] efuse: device aml_keys created | |
[ 5.476492@0] amlkeys=0 | |
[ 5.479092@0] platform_driver_register--aml_keys_driver-------------------- | |
[ 5.506659@0] 6amlogic audio data interface device init! | |
[ 5.506691@0] aml_dvb_init | |
[ 5.509256@0] dvb_io_setup start | |
[ 5.512408@0] DVB: registering new adapter (amlogic-dvb) | |
[ 5.521791@0] DVB: async fifo 0 buf size 524288, flush size 262144 | |
[ 5.524415@0] DVB: async fifo 1 buf size 524288, flush size 262144 | |
[ 5.531126@0] A8304 probe | |
[ 5.532777@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.541675@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.550493@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.559301@0] A8304_I2CWrite: writereg error, errno is -11 | |
[ 5.564959@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.573836@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.582883@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.591529@0] A8304_I2CRead: readreg error, errno is -11 | |
[ 5.596970@0] ##### A8304 status register=0x0 ##### | |
[ 5.601850@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.610726@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.619582@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.628402@0] A8304_I2CWrite: writereg error, errno is -11 | |
[ 5.634008@0] ##### A8304_SetLnb: data= 0x0, 0x73 ##### | |
[ 5.746716@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.749981@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.758862@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.767676@0] A8304_I2CWrite: writereg error, errno is -11 | |
[ 5.773331@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.782212@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.791063@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.799874@0] A8304_I2CRead: readreg error, errno is -11 | |
[ 5.805317@0] ##### A8304 status register=0x0 ##### | |
[ 5.810252@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.819109@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.827951@0] i2c i2c-0: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(0) 300K addr 0xb | |
[ 5.836776@0] A8304_I2CWrite: writereg error, errno is -11 | |
[ 5.842381@0] ##### A8304_SetLnb: data= 0x0, 0x60 ##### | |
[ 5.906663@0] ##### A8304 status register=0x0 ##### | |
[ 5.906699@0] a8304: probe of a8304 failed with error 1 | |
[ 5.911269@0] init avl6211 frontend 0 | |
[ 5.914756@0] DVB: cannot get resource "frontend0_POWERON/OFF" | |
[ 5.920630@0] DVB: registering adapter 0 frontend -1 (AMLOGIC DVB-S2)... | |
[ 5.928160@0] Smartcard: cannot get resource "smc0_reset" | |
[ 5.933041@0] SMC CLK SOURCE - 200000KHz | |
[ 5.937290@0] aml_hw_crypto initialization. | |
[ 5.941493@0] usbcore: registered new interface driver snd-usb-audio | |
[ 5.948167@0] enter dummy_codec_audio_probe | |
[ 5.952119@0] aml-pcm 0:playback preallocate_dma_buffer: area=ffd80000, addr=9e4c0000, size=131072 | |
[ 5.961329@0] iec958 0: preallocate dma buffer start=ffd00000, size=80000 | |
[ 5.967696@0] aml-pcm 1:capture preallocate_dma_buffer: area=ffce0000, addr=9e4a0000, size=65536 | |
[ 5.975682@0] asoc: dummy_codec <-> aml-dai0 mapping ok | |
[ 5.982489@0] ALSA device list: | |
[ 5.984012@0] #0: AML-DUMMY-CODEC | |
[ 5.987681@0] GACT probability NOT on | |
[ 5.991136@0] Mirror/redirect action on | |
[ 5.994950@0] u32 classifier | |
[ 5.997851@0] Actions configured | |
[ 6.001375@0] Netfilter messages via NETLINK v0.30. | |
[ 6.006280@0] nf_conntrack version 0.5.0 (12339 buckets, 49356 max) | |
[ 6.013202@0] ctnetlink v0.93: registering with nfnetlink. | |
[ 6.018047@0] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 | |
[ 6.025068@0] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. | |
[ 6.031756@1] xt_time: kernel timezone is -0000 | |
[ 6.035725@1] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 6.041184@1] arp_tables: (C) 2002 David S. Miller | |
[ 6.045857@1] TCP cubic registered | |
[ 6.046712@0] mmc data3 pull high | |
[ 6.046924@0] sd_mmc_info->card_type=0 | |
[ 6.046928@0] begin SDIO check ...... | |
[ 6.060905@1] NET: Registered protocol family 10 | |
[ 6.065185@1] Mobile IPv6 | |
[ 6.067136@1] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 6.069518@0] sdio_timeout_int_times = 0; timeout = 498 | |
[ 6.077968@1] IPv6 over IPv4 tunneling driver | |
[ 6.083380@1] NET: Registered protocol family 17 | |
[ 6.086834@1] NET: Registered protocol family 15 | |
[ 6.091535@1] Bridge firewalling registered | |
[ 6.092112@0] sdio_timeout_int_times = 0; timeout = 498 | |
[ 6.092119@0] SEND OP timeout @1 | |
[ 6.092123@0] mmc data3 pull high | |
[ 6.092324@0] begin SD&SDHC check ...... | |
[ 6.107073@0] set type to SDHC | |
[ 6.114261@1] NET: Registered protocol family 35 | |
[ 6.119125@1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
[ 6.126628@1] DDR low power is enable. | |
[ 6.130436@1] enter meson_pm_probe! | |
[ 6.133832@1] meson_pm_probe done ! | |
[ 6.137890@1] ------------[ cut here ]------------ | |
[ 6.142096@1] WARNING: at /work/project/aml8726/amlogic_android/common/kernel/smp.c:459 smp_call_function_many+0xc8/0x280() | |
[ 6.153184@1] Modules linked in: | |
[ 6.156421@1] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c0060ee0>] (warn_slowpath_common+0x4c/0x64) | |
[ 6.165951@1] [<c0060ee0>] (warn_slowpath_common+0x4c/0x64) from [<c0060f14>] (warn_slowpath_null+0x1c/0x24) | |
[ 6.175758@1] [<c0060f14>] (warn_slowpath_null+0x1c/0x24) from [<c008e594>] (smp_call_function_many+0xc8/0x280) | |
[ 6.185828@1] [<c008e594>] (smp_call_function_many+0xc8/0x280) from [<c008e780>] (smp_call_function+0x34/0x68) | |
[ 6.195812@1] [<c008e780>] (smp_call_function+0x34/0x68) from [<c0048c10>] (clk_set_rate_a9+0x9c/0xdc) | |
[ 6.205097@1] [<c0048c10>] (clk_set_rate_a9+0x9c/0xdc) from [<c0048f0c>] (meson_clk_set_rate+0x130/0x168) | |
[ 6.214644@1] [<c0048f0c>] (meson_clk_set_rate+0x130/0x168) from [<c0048fd8>] (clk_set_rate+0x94/0xbc) | |
[ 6.223937@1] [<c0048fd8>] (clk_set_rate+0x94/0xbc) from [<c0051d24>] (meson_cpufreq_target_locked.isra.2+0x14c/0x224) | |
[ 6.227453@0] Actual delay time in sd_voltage_validation() = 80 ms | |
[ 6.227459@0] S18A : 0 | |
[ 6.243117@1] [<c0051d24>] (meson_cpufreq_target_locked.isra.2+0x14c/0x224) from [<c0051e20>] (meson_cpufreq_target+0x24/0x3c) | |
[ 6.254494@1] [<c0051e20>] (meson_cpufreq_target+0x24/0x3c) from [<c037c8f8>] (__cpufreq_driver_target+0x50/0x64) | |
[ 6.264731@1] [<c037c8f8>] (__cpufreq_driver_target+0x50/0x64) from [<c037f098>] (cpufreq_governor_performance+0x28/0x30) | |
[ 6.275666@1] [<c037f098>] (cpufreq_governor_performance+0x28/0x30) from [<c037c9e0>] (__cpufreq_governor+0xb0/0x138) | |
[ 6.286254@1] [<c037c9e0>] (__cpufreq_governor+0xb0/0x138) from [<c037d840>] (__cpufreq_set_policy+0x128/0x168) | |
[ 6.287074@0] Got RCA = 58916 | |
[ 6.287822@0] | |
[ 6.287825@0] ***********CID************* | |
[ 6.287830@0] 03:53:44:53:55:30:34:47:80:04:3b:3d:4d:00:ca:00: | |
[ 6.287845@0] MID[8]=3 | |
[ 6.287849@0] OID[16]=SD | |
[ 6.287852@0] PNM[40]=SU04G | |
[ 6.287855@0] PRV[8]=128 | |
[ 6.287858@0] PSN[32]=0x4d3d3b04 | |
[ 6.287862@0] Reserved[4]=0 | |
[ 6.287865@0] year[8].month[4]=2012.10 | |
[ 6.287869@0] NotUsed[1]=0 | |
[ 6.287872@0] CRC[7]=0 | |
[ 6.287874@0] | |
[ 6.288604@0] | |
[ 6.288607@0] ********** CSD v2 ************** | |
[ 6.288611@0] 40:0e:00:32:5b:59:00:00:1d:8a:7f:80:0a:40:40:00: | |
[ 6.288627@0] CSD_STRUCTURE[2]=1 | |
[ 6.288630@0] Reserved1[6]=0 | |
[ 6.288634@0] TAAC[8]=14 | |
[ 6.288637@0] NSAC[8]=0 | |
[ 6.288640@0] TRAN_SPEED[8]=50 | |
[ 6.288644@0] CCC[8+4]=0x5b5 | |
[ 6.288647@0] READ_BL_LEN[4]=9 | |
[ 6.288650@0] READ_BL_PARTIAL[1]=0 | |
[ 6.288654@0] WRITE_BLK_MISALIGN[1]=0 | |
[ 6.288657@0] READ_BLK_MISALIGN[1]=0 | |
[ 6.288661@0] DSR_IMP[1]=0 | |
[ 6.288664@0] Reserved2[4]=0 | |
[ 6.288667@0] Reserved3[2]=0 | |
[ 6.288671@0] C_SIZE[6+8+8]=7562 | |
[ 6.288674@0] Reserved4[1]=0 | |
[ 6.288677@0] ERASE_BLK_EN[1]=1 | |
[ 6.288681@0] SECTOR_SIZE[6+1]=127 | |
[ 6.288684@0] WP_GRP_SIZE[7]=0 | |
[ 6.288688@0] WP_GRP_ENABLE[1]=0 | |
[ 6.288691@0] Reserved5[2]=0 | |
[ 6.288694@0] R2W_FACTOR[3]=2 | |
[ 6.288697@0] WRITE_BL_LEN[2+2]=9 | |
[ 6.288700@0] WRITE_BL_PARTIAL[1]=0 | |
[ 6.288704@0] Reserved6[5]=0 | |
[ 6.288707@0] FILE_FORMAT_GRP[1]=0 | |
[ 6.288710@0] COPY[1]=1 | |
[ 6.288713@0] PERM_WRITE_PROTECT[1]=0 | |
[ 6.288717@0] TMP_WRITE_PROTECT[1]=0 | |
[ 6.288720@0] FILE_FORMAT[2]=0 | |
[ 6.288723@0] Reserved7[2]=0 | |
[ 6.288726@0] CRC[7]=0 | |
[ 6.288729@0] NotUsed[1]=0 | |
[ 6.288731@0] | |
[ 6.289147@0] total block nums : 0x762c00(7744512) | |
[ 6.290570@0] | |
[ 6.290573@0] ***********SCR************* | |
[ 6.290577@0] 02:35:80:01:00:00:00:00: | |
[ 6.290586@0] SD_SPEC[4]=2 | |
[ 6.290589@0] SCR_STRUCTURE[4]=0 | |
[ 6.290592@0] SD_BUS_WIDTHS[4]=5 | |
[ 6.290595@0] SD_SECURITY[3]=3 | |
[ 6.290599@0] DATA_STAT_AFTER_ERASE[1]=0 | |
[ 6.290602@0] Rsv1[7]=0 | |
[ 6.290605@0] SD_SPEC3[1]=1 | |
[ 6.290608@0] CMD_SUPPORT[2]=1 | |
[ 6.290611@0] Rsv2[6]=0 | |
[ 6.290614@0] Reserved2[32]=0 | |
[ 6.290617@0] | |
[ 6.293262@0] 00c88001 80018001 8001c001 80030000 | |
[ 6.293284@0] 01000000 00000000 00000000 00000000 | |
[ 6.293305@0] 00000000 00000000 00000000 00000000 | |
[ 6.293324@0] 00000000 00000000 00000000 00000000 | |
[ 6.293346@0] | |
[ 6.293348@0] ****************switch status**************** | |
[ 6.293353@0] Data_Struction_Verion : 0 | |
[ 6.293357@0] Max_Current_Consumption : 200 | |
[ 6.293362@0] Support[0] : 0x8001 Busy[0] : 0x0 | |
[ 6.293368@0] Support[1] : 0x8001 Busy[1] : 0x0 | |
[ 6.293374@0] Support[2] : 0x8001 Busy[2] : 0x0 | |
[ 6.293379@0] Support[3] : 0x8001 Busy[3] : 0x0 | |
[ 6.293385@0] Support[4] : 0xc001 Busy[4] : 0x0 | |
[ 6.293391@0] Support[5] : 0x8003 Busy[5] : 0x0 | |
[ 6.293396@0] Function_Group_Status6 : 0 | |
[ 6.293400@0] Function_Group_Status5 : 0 | |
[ 6.293404@0] Function_Group_Status4 : 0 | |
[ 6.293408@0] Function_Group_Status3 : 0 | |
[ 6.293411@0] Function_Group_Status2 : 0 | |
[ 6.293415@0] Function_Group_Status1 : 1 | |
[ 6.293418@0] | |
[ 6.295036@0] 00c88001 80018001 8001c001 80030000 | |
[ 6.295057@0] 01000000 00000000 00000000 00000000 | |
[ 6.295077@0] 00000000 00000000 00000000 00000000 | |
[ 6.295096@0] 00000000 00000000 00000000 00000000 | |
[ 6.295117@0] | |
[ 6.295119@0] ****************switch status**************** | |
[ 6.295124@0] Data_Struction_Verion : 0 | |
[ 6.295127@0] Max_Current_Consumption : 200 | |
[ 6.295132@0] Support[0] : 0x8001 Busy[0] : 0x0 | |
[ 6.295138@0] Support[1] : 0x8001 Busy[1] : 0x0 | |
[ 6.295144@0] Support[2] : 0x8001 Busy[2] : 0x0 | |
[ 6.295149@0] Support[3] : 0x8001 Busy[3] : 0x0 | |
[ 6.295155@0] Support[4] : 0xc001 Busy[4] : 0x0 | |
[ 6.295161@0] Support[5] : 0x8003 Busy[5] : 0x0 | |
[ 6.295166@0] Function_Group_Status6 : 0 | |
[ 6.295170@0] Function_Group_Status5 : 0 | |
[ 6.295173@0] Function_Group_Status4 : 0 | |
[ 6.295177@0] Function_Group_Status3 : 0 | |
[ 6.295181@0] Function_Group_Status2 : 0 | |
[ 6.295185@0] Function_Group_Status1 : 1 | |
[ 6.295187@0] | |
[ 6.295193@0] sd_mmc_init() is completed successfully! | |
[ 6.295200@0] This SDHC card is working in Wide Bus and at 50MHz High Speed mode! | |
[ 6.295204@0] | |
[ 6.680674@1] [<c037d840>] (__cpufreq_set_policy+0x128/0x168) from [<c037dae0>] (cpufreq_add_dev_interface+0x260/0x2c8) | |
[ 6.691436@1] [<c037dae0>] (cpufreq_add_dev_interface+0x260/0x2c8) from [<c037e004>] (cpufreq_add_dev+0x4bc/0x634) | |
[ 6.701774@1] [<c037e004>] (cpufreq_add_dev+0x4bc/0x634) from [<c0297c50>] (sysdev_driver_register+0xb0/0x12c) | |
[ 6.711754@1] [<c0297c50>] (sysdev_driver_register+0xb0/0x12c) from [<c037ceac>] (cpufreq_register_driver+0x70/0x17c) | |
[ 6.722342@1] [<c037ceac>] (cpufreq_register_driver+0x70/0x17c) from [<c029a4d0>] (platform_drv_probe+0x18/0x1c) | |
[ 6.732495@1] [<c029a4d0>] (platform_drv_probe+0x18/0x1c) from [<c02992c4>] (driver_probe_device+0x90/0x1ac) | |
[ 6.742302@1] [<c02992c4>] (driver_probe_device+0x90/0x1ac) from [<c029946c>] (__driver_attach+0x8c/0x90) | |
[ 6.751850@1] [<c029946c>] (__driver_attach+0x8c/0x90) from [<c02984e4>] (bus_for_each_dev+0x5c/0x88) | |
[ 6.761050@1] [<c02984e4>] (bus_for_each_dev+0x5c/0x88) from [<c0298ca8>] (bus_add_driver+0x17c/0x244) | |
[ 6.770337@1] [<c0298ca8>] (bus_add_driver+0x17c/0x244) from [<c0299918>] (driver_register+0x78/0x13c) | |
[ 6.779626@1] [<c0299918>] (driver_register+0x78/0x13c) from [<c029a880>] (platform_driver_probe+0x18/0x9c) | |
[ 6.789353@1] [<c029a880>] (platform_driver_probe+0x18/0x9c) from [<c003670c>] (do_one_initcall+0xfc/0x164) | |
[ 6.799074@1] [<c003670c>] (do_one_initcall+0xfc/0x164) from [<c0008988>] (kernel_init+0x98/0x13c) | |
[ 6.808015@1] [<c0008988>] (kernel_init+0x98/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 6.816948@1] ---[ end trace 1b75b31a2719ed1d ]--- | |
[ 6.821720@1] ------------[ cut here ]------------ | |
[ 6.826498@1] WARNING: at /work/project/aml8726/amlogic_android/common/kernel/smp.c:320 smp_call_function_single+0x150/0x1c0() | |
[ 6.837863@1] Modules linked in: | |
[ 6.841084@1] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c0060ee0>] (warn_slowpath_common+0x4c/0x64) | |
[ 6.850629@1] [<c0060ee0>] (warn_slowpath_common+0x4c/0x64) from [<c0060f14>] (warn_slowpath_null+0x1c/0x24) | |
[ 6.860437@1] [<c0060f14>] (warn_slowpath_null+0x1c/0x24) from [<c008e45c>] (smp_call_function_single+0x150/0x1c0) | |
[ 6.870767@1] [<c008e45c>] (smp_call_function_single+0x150/0x1c0) from [<c008e780>] (smp_call_function+0x34/0x68) | |
[ 6.881010@1] [<c008e780>] (smp_call_function+0x34/0x68) from [<c0048c10>] (clk_set_rate_a9+0x9c/0xdc) | |
[ 6.890297@1] [<c0048c10>] (clk_set_rate_a9+0x9c/0xdc) from [<c0048f0c>] (meson_clk_set_rate+0x130/0x168) | |
[ 6.899844@1] [<c0048f0c>] (meson_clk_set_rate+0x130/0x168) from [<c0048fd8>] (clk_set_rate+0x94/0xbc) | |
[ 6.909135@1] [<c0048fd8>] (clk_set_rate+0x94/0xbc) from [<c0051d24>] (meson_cpufreq_target_locked.isra.2+0x14c/0x224) | |
[ 6.919811@1] [<c0051d24>] (meson_cpufreq_target_locked.isra.2+0x14c/0x224) from [<c0051e20>] (meson_cpufreq_target+0x24/0x3c) | |
[ 6.931182@1] [<c0051e20>] (meson_cpufreq_target+0x24/0x3c) from [<c037c8f8>] (__cpufreq_driver_target+0x50/0x64) | |
[ 6.941423@1] [<c037c8f8>] (__cpufreq_driver_target+0x50/0x64) from [<c037f098>] (cpufreq_governor_performance+0x28/0x30) | |
[ 6.952360@1] [<c037f098>] (cpufreq_governor_performance+0x28/0x30) from [<c037c9e0>] (__cpufreq_governor+0xb0/0x138) | |
[ 6.962949@1] [<c037c9e0>] (__cpufreq_governor+0xb0/0x138) from [<c037d840>] (__cpufreq_set_policy+0x128/0x168) | |
[ 6.973017@1] [<c037d840>] (__cpufreq_set_policy+0x128/0x168) from [<c037dae0>] (cpufreq_add_dev_interface+0x260/0x2c8) | |
[ 6.983780@1] [<c037dae0>] (cpufreq_add_dev_interface+0x260/0x2c8) from [<c037e004>] (cpufreq_add_dev+0x4bc/0x634) | |
[ 6.994111@1] [<c037e004>] (cpufreq_add_dev+0x4bc/0x634) from [<c0297c50>] (sysdev_driver_register+0xb0/0x12c) | |
[ 7.004094@1] [<c0297c50>] (sysdev_driver_register+0xb0/0x12c) from [<c037ceac>] (cpufreq_register_driver+0x70/0x17c) | |
[ 7.014683@1] [<c037ceac>] (cpufreq_register_driver+0x70/0x17c) from [<c029a4d0>] (platform_drv_probe+0x18/0x1c) | |
[ 7.024837@1] [<c029a4d0>] (platform_drv_probe+0x18/0x1c) from [<c02992c4>] (driver_probe_device+0x90/0x1ac) | |
[ 7.034645@1] [<c02992c4>] (driver_probe_device+0x90/0x1ac) from [<c029946c>] (__driver_attach+0x8c/0x90) | |
[ 7.044193@1] [<c029946c>] (__driver_attach+0x8c/0x90) from [<c02984e4>] (bus_for_each_dev+0x5c/0x88) | |
[ 7.053394@1] [<c02984e4>] (bus_for_each_dev+0x5c/0x88) from [<c0298ca8>] (bus_add_driver+0x17c/0x244) | |
[ 7.062681@1] [<c0298ca8>] (bus_add_driver+0x17c/0x244) from [<c0299918>] (driver_register+0x78/0x13c) | |
[ 7.071970@1] [<c0299918>] (driver_register+0x78/0x13c) from [<c029a880>] (platform_driver_probe+0x18/0x9c) | |
[ 7.081692@1] [<c029a880>] (platform_driver_probe+0x18/0x9c) from [<c003670c>] (do_one_initcall+0xfc/0x164) | |
[ 7.091413@1] [<c003670c>] (do_one_initcall+0xfc/0x164) from [<c0008988>] (kernel_init+0x98/0x13c) | |
[ 7.100355@1] [<c0008988>] (kernel_init+0x98/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 7.109290@1] ---[ end trace 1b75b31a2719ed1e ]--- | |
[ 7.122347@0] android_usb gadget: Mass Storage Function, version: 2009/09/11 | |
[ 7.123757@0] android_usb gadget: Number of LUNs=2 | |
[ 7.128739@1] cardblksd: cardblksd1 cardblksd2 | |
[ 7.128752@0] lun0: LUN: removable file: (no medium) | |
[ 7.128760@0] lun1: LUN: removable file: (no medium) | |
[ 7.137528@0] android_usb gadget: android_usb ready | |
[ 7.148033@0] aml_rtc aml_rtc: setting system clock to 1970-01-01 00:06:25 UTC (385) | |
[ 7.155704@0] CEC init | |
[ 7.158406@0] CEC: CEC task process | |
[ 7.161522@0] input: cec_input as /devices/virtual/input/input1 | |
[ 7.166676@1] monitor : INSERT | |
[ 7.166707@1] | |
[ [ 7.196709@0] Changing baud from 0 to 115200 | |
[ 7.796662@1] mmc data3 pull high | |
[ 7.796881@0] sd_mmc_info->card_type=0 | |
[ 7.798068@0] begin SDIO check ...... | |
[ 7.802501@0] Actual delay time in sdio_voltage_validation() = 10 ms | |
[ 7.867046@0] Got RCA = 1 | |
[ 7.868981@0] #this sdio card could not support read after write | |
[ 7.870071@0] sd_mmc_init() is completed successfully! | |
[ 7.875132@0] This SDIO card is working in Wide Bus and at 25MHz High Speed mode! | |
[ 7.875137@0] | |
[ 7.884910@0] monitor : INSERT | |
[ 7.887741@0] memorycard0: queuing unknown CIS tuple 0x80 (2 bytes) | |
[ 7.893602@0] memorycard0: queuing unknown CIS tuple 0x80 (3 bytes) | |
[ 7.899900@0] memorycard0: queuing unknown CIS tuple 0x80 (3 bytes) | |
[ 7.906148@0] memorycard0: queuing unknown CIS tuple 0x80 (7 bytes) | |
[ 7.913924@0] EXT3-fs: barriers not enabled | |
[ 7.918537@1] kjournald starting. Commit interval 5 seconds | |
[ 7.921882@0] EXT3-fs (cardblksd2): using internal journal | |
[ 7.921890@0] EXT3-fs (cardblksd2): recovery complete | |
[ 7.921905@0] EXT3-fs (cardblksd2): mounted filesystem with ordered data mode | |
[ 7.921954@0] VFS: Mounted root (ext3 filesystem) on device 253:2. | |
[ 7.922829@0] devtmpfs: error mounting -2 | |
[ 7.922901@0] Freeing init memory: 184K | |
[ 7.922933@0] Failed to execute /init. Attempting defaults... | |
[ 7.922974@0] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. | |
[ 7.923030@0] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c05e03bc>] (panic+0x64/0x17c) | |
[ 7.923047@0] [<c05e03bc>] (panic+0x64/0x17c) from [<c05e0070>] (init_post+0xac/0xd0) | |
[ 7.923063@0] [<c05e0070>] (init_post+0xac/0xd0) from [<c00089fc>] (kernel_init+0x10c/0x13c) | |
[ 7.923089@0] [<c00089fc>] (kernel_init+0x10c/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 8.005681@1] CPU1: stopping | |
[ 8.008553@1] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c0036460>] (do_IPI+0x1e0/0x214) | |
[ 8.017054@1] [<c0036460>] (do_IPI+0x1e0/0x214) from [<c003bb4c>] (__irq_svc+0x4c/0xe4) | |
[ 8.025034@1] Exception stack(0xde7e5e90 to 0xde7e5ed8) | |
[ 8.030243@1] 5e80: 00000001 80000093 c0837f50 c0837f50 | |
[ 8.038576@1] 5ea0: c0880456 c0837ef0 c0880485 00000046 60000013 de7e5f1f 00000003 00000011 | |
[ 8.046908@1] 5ec0: c09e9d90 de7e5ed8 c0061dc4 c0061c5c 60000013 ffffffff | |
[ 8.053686@1] [<c003bb4c>] (__irq_svc+0x4c/0xe4) from [<c0061c5c>] (vprintk+0x180/0x4dc) | |
[ 8.061757@1] [<c0061c5c>] (vprintk+0x180/0x4dc) from [<c05e04f0>] (printk+0x1c/0x2c) | |
[ 8.069570@1] [<c05e04f0>] (printk+0x1c/0x2c) from [<c0175b1c>] (kjournald+0x88/0x214) | |
[ 8.077471@1] [<c0175b1c>] (kjournald+0x88/0x214) from [<c007b0d8>] (kthread+0x80/0x88) | |
[ 8.085452@1] [<c007b0d8>] (kthread+0x80/0x88) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 8.093955@0] m3_nand_reboot_notifier 1242 | |
[ 8.098138@0] BUG: scheduling while atomic: swapper/1/0x00000002 | |
[ 8.104107@0] Modules linked in: | |
[ 8.107331@0] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c05e53bc>] (__schedule+0x5c8/0x694) | |
[ 8.116179@0] [<c05e53bc>] (__schedule+0x5c8/0x694) from [<c05e5aec>] (schedule_timeout+0x190/0x214) | |
[ 8.125305@0] [<c05e5aec>] (schedule_timeout+0x190/0x214) from [<c05e4b7c>] (wait_for_common+0xac/0x150) | |
[ 8.134773@0] [<c05e4b7c>] (wait_for_common+0xac/0x150) from [<c007b124>] (kthread_stop+0x44/0x7c) | |
[ 8.143714@0] [<c007b124>] (kthread_stop+0x44/0x7c) from [<c03f4c40>] (aml_nftl_reboot_notifier+0x2c/0x1a4) | |
[ 8.153431@0] [<c03f4c40>] (aml_nftl_reboot_notifier+0x2c/0x1a4) from [<c00804c4>] (notifier_call_chain+0x44/0x84) | |
[ 8.163756@0] [<c00804c4>] (notifier_call_chain+0x44/0x84) from [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) | |
[ 8.174344@0] [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) from [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) | |
[ 8.185540@0] [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) from [<c05e03d8>] (panic+0x80/0x17c) | |
[ 8.194828@0] [<c05e03d8>] (panic+0x80/0x17c) from [<c05e0070>] (init_post+0xac/0xd0) | |
[ 8.202643@0] [<c05e0070>] (init_post+0xac/0xd0) from [<c00089fc>] (kernel_init+0x10c/0x13c) | |
[ 8.211062@0] [<c00089fc>] (kernel_init+0x10c/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 8.220192@0] aml_nftl_reboot_notifier :system 0 | |
[ 8.224678@0] BUG: scheduling while atomic: swapper/1/0x00000002 | |
[ 8.230679@0] Modules linked in: | |
[ 8.233885@0] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c05e53bc>] (__schedule+0x5c8/0x694) | |
[ 8.242747@0] [<c05e53bc>] (__schedule+0x5c8/0x694) from [<c05e5aec>] (schedule_timeout+0x190/0x214) | |
[ 8.251856@0] [<c05e5aec>] (schedule_timeout+0x190/0x214) from [<c05e4b7c>] (wait_for_common+0xac/0x150) | |
[ 8.261318@0] [<c05e4b7c>] (wait_for_common+0xac/0x150) from [<c007b124>] (kthread_stop+0x44/0x7c) | |
[ 8.270267@0] [<c007b124>] (kthread_stop+0x44/0x7c) from [<c03f4c40>] (aml_nftl_reboot_notifier+0x2c/0x1a4) | |
[ 8.279985@0] [<c03f4c40>] (aml_nftl_reboot_notifier+0x2c/0x1a4) from [<c00804c4>] (notifier_call_chain+0x44/0x84) | |
[ 8.290309@0] [<c00804c4>] (notifier_call_chain+0x44/0x84) from [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) | |
[ 8.300898@0] [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) from [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) | |
[ 8.312097@0] [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) from [<c05e03d8>] (panic+0x80/0x17c) | |
[ 8.321383@0] [<c05e03d8>] (panic+0x80/0x17c) from [<c05e0070>] (init_post+0xac/0xd0) | |
[ 8.329198@0] [<c05e0070>] (init_post+0xac/0xd0) from [<c00089fc>] (kernel_init+0x10c/0x13c) | |
[ 8.337617@0] [<c00089fc>] (kernel_init+0x10c/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 8.346661@0] aml_nftl_reboot_notifier :cache 0 | |
[ 8.351144@0] BUG: scheduling while atomic: swapper/1/0x00000002 | |
[ 8.357140@0] Modules linked in: | |
[ 8.360350@0] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c05e53bc>] (__schedule+0x5c8/0x694) | |
[ 8.369210@0] [<c05e53bc>] (__schedule+0x5c8/0x694) from [<c05e5aec>] (schedule_timeout+0x190/0x214) | |
[ 8.378323@0] [<c05e5aec>] (schedule_timeout+0x190/0x214) from [<c05e4b7c>] (wait_for_common+0xac/0x150) | |
[ 8.387785@0] [<c05e4b7c>] (wait_for_common+0xac/0x150) from [<c007b124>] (kthread_stop+0x44/0x7c) | |
[ 8.396730@0] [<c007b124>] (kthread_stop+0x44/0x7c) from [<c03f4c40>] (aml_nftl_reboot_notifier+0x2c/0x1a4) | |
[ 8.406438@0] [<c03f4c40>] (aml_nftl_reboot_notifier+0x2c/0x1a4) from [<c00804c4>] (notifier_call_chain+0x44/0x84) | |
[ 8.416778@0] [<c00804c4>] (notifier_call_chain+0x44/0x84) from [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) | |
[ 8.427369@0] [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) from [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) | |
[ 8.438564@0] [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) from [<c05e03d8>] (panic+0x80/0x17c) | |
[ 8.447849@0] [<c05e03d8>] (panic+0x80/0x17c) from [<c05e0070>] (init_post+0xac/0xd0) | |
[ 8.455652@0] [<c05e0070>] (init_post+0xac/0xd0) from [<c00089fc>] (kernel_init+0x10c/0x13c) | |
[ 8.464085@0] [<c00089fc>] (kernel_init+0x10c/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 8.473137@0] aml_nftl_reboot_notifier :backup 0 | |
[ 8.477711@0] BUG: scheduling while atomic: swapper/1/0x00000002 | |
[ 8.483683@0] Modules linked in: | |
[ 8.486905@0] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c05e53bc>] (__schedule+0x5c8/0x694) | |
[ 8.495754@0] [<c05e53bc>] (__schedule+0x5c8/0x694) from [<c05e5aec>] (schedule_timeout+0x190/0x214) | |
[ 8.504878@0] [<c05e5aec>] (schedule_timeout+0x190/0x214) from [<c05e4b7c>] (wait_for_common+0xac/0x150) | |
[ 8.514341@0] [<c05e4b7c>] (wait_for_common+0xac/0x150) from [<c007b124>] (kthread_stop+0x44/0x7c) | |
[ 8.523286@0] [<c007b124>] (kthread_stop+0x44/0x7c) from [<c03f4c40>] (aml_nftl_reboot_notifier+0x2c/0x1a4) | |
[ 8.533003@0] [<c03f4c40>] (aml_nftl_reboot_notifier+0x2c/0x1a4) from [<c00804c4>] (notifier_call_chain+0x44/0x84) | |
[ 8.543332@0] [<c00804c4>] (notifier_call_chain+0x44/0x84) from [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) | |
[ 8.553920@0] [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) from [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) | |
[ 8.565116@0] [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) from [<c05e03d8>] (panic+0x80/0x17c) | |
[ 8.574404@0] [<c05e03d8>] (panic+0x80/0x17c) from [<c05e0070>] (init_post+0xac/0xd0) | |
[ 8.582218@0] [<c05e0070>] (init_post+0xac/0xd0) from [<c00089fc>] (kernel_init+0x10c/0x13c) | |
[ 8.590637@0] [<c00089fc>] (kernel_init+0x10c/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 8.599679@0] aml_nftl_reboot_notifier :data 0 | |
[ 8.604076@0] aml_keys_notify_reboot:1552[card_reboot_notifier] sd | |
[ 8.610242@0] BUG: scheduling while atomic: swapper/1/0x00000002 | |
[ 8.616226@0] Modules linked in: | |
[ 8.619448@0] [<c0042b44>] (unwind_backtrace+0x0/0xf8) from [<c05e53bc>] (__schedule+0x5c8/0x694) | |
[ 8.628309@0] [<c05e53bc>] (__schedule+0x5c8/0x694) from [<c05e5aec>] (schedule_timeout+0x190/0x214) | |
[ 8.637421@0] [<c05e5aec>] (schedule_timeout+0x190/0x214) from [<c05e4b7c>] (wait_for_common+0xac/0x150) | |
[ 8.646884@0] [<c05e4b7c>] (wait_for_common+0xac/0x150) from [<c007b124>] (kthread_stop+0x44/0x7c) | |
[ 8.655818@0] [<c007b124>] (kthread_stop+0x44/0x7c) from [<c0421168>] (card_reboot_notifier+0x28/0x40) | |
[ 8.665112@0] [<c0421168>] (card_reboot_notifier+0x28/0x40) from [<c00804c4>] (notifier_call_chain+0x44/0x84) | |
[ 8.675006@0] [<c00804c4>] (notifier_call_chain+0x44/0x84) from [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) | |
[ 8.685597@0] [<c0080788>] (__atomic_notifier_call_chain+0x38/0x4c) from [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) | |
[ 8.696793@0] [<c00807b4>] (atomic_notifier_call_chain+0x18/0x20) from [<c05e03d8>] (panic+0x80/0x17c) | |
[ 8.706069@0] [<c05e03d8>] (panic+0x80/0x17c) from [<c05e0070>] (init_post+0xac/0xd0) | |
[ 8.713894@0] [<c05e0070>] (init_post+0xac/0xd0) from [<c00089fc>] (kernel_init+0x10c/0x13c) | |
[ 8.722311@0] [<c00089fc>] (kernel_init+0x10c/0x13c) from [<c003d0c0>] (kernel_thread_exit+0x0/0x8) | |
[ 8.731362@0] [card_reboot_notifier] out and kthread stoped |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment