Skip to content

Instantly share code, notes, and snippets.

@luisgabriel

luisgabriel/dmesg

Created January 3, 2016 21:24
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save luisgabriel/b112bda6f6c4cfab98bc to your computer and use it in GitHub Desktop.
Save luisgabriel/b112bda6f6c4cfab98bc to your computer and use it in GitHub Desktop.
Download ZIP
HDD
Raw
dmesg
[ 652.587523] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 652.587531] ata1.00: failed command: SMART
[ 652.587537] ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 10 pio 512 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 652.587540] ata1.00: status: { DRDY }
[ 652.587545] ata1: hard resetting link
[ 657.923282] ata1: link is slow to respond, please be patient (ready=0)
[ 660.431130] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 660.431533] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
[ 660.431539] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8802160b3f00), AE_NOT_FOUND (20150619/psparse-536)
[ 660.432175] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
[ 660.432179] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8802160b3f00), AE_NOT_FOUND (20150619/psparse-536)
[ 660.432391] ata1.00: configured for UDMA/133
[ 660.432423] ata1: EH complete
[ 668.588248] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 668.588254] ata1.00: failed command: SMART
[ 668.588260] ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 8
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 668.588263] ata1.00: status: { DRDY }
[ 668.588267] ata1: hard resetting link
[ 673.924042] ata1: link is slow to respond, please be patient (ready=0)
[ 677.445656] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 677.517677] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
[ 677.517686] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8802160b3f00), AE_NOT_FOUND (20150619/psparse-536)
[ 677.518375] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150619/psargs-359)
[ 677.518380] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8802160b3f00), AE_NOT_FOUND (20150619/psparse-536)
[ 677.518611] ata1.00: configured for UDMA/133
[ 677.518635] ata1: EH complete
Raw
smartctl
luisgabriel ~ $ sudo smartctl -v 1,hex48 -v 7,hex48 -a /dev/sda
[sudo] password for luisgabriel:
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.2.5-1-ARCH] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: S1D92MB5
LU WWN Device Id: 5 000c50 060c10c29
Firmware Version: CC46
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 3 18:22:53 2016 BRT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 108) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 090 084 006 Pre-fail Always - 0x00000ae15ec5
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1080
5 Reallocated_Sector_Ct 0x0033 087 087 010 Pre-fail Always - 13464
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 0x00000abecc70
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7234
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1076
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 904
188 Command_Timeout 0x0032 098 092 000 Old_age Always - 30 80 87
189 High_Fly_Writes 0x003a 097 097 000 Old_age Always - 3
190 Airflow_Temperature_Cel 0x0022 063 061 045 Old_age Always - 37 (Min/Max 37/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53
193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 6974
194 Temperature_Celsius 0x0022 037 040 000 Old_age Always - 37 (0 21 0 0 0)
197 Current_Pending_Sector 0x0012 052 042 000 Old_age Always - 7912
198 Offline_Uncorrectable 0x0010 052 042 000 Old_age Offline - 7912
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7149h+08m+40.990s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 24767193587
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 18744099698
SMART Error Log Version: 1
ATA Error Count: 1544 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1544 occurred at disk power-on lifetime: 7234 hours (301 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 58 08 18 05 Error: UNC at LBA = 0x05180858 = 85461080
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 58 08 18 45 00 00:03:49.446 READ FPDMA QUEUED
60 00 08 50 08 18 45 00 00:03:44.986 READ FPDMA QUEUED
60 00 08 48 08 18 45 00 00:03:41.919 READ FPDMA QUEUED
60 00 08 40 08 18 45 00 00:03:39.544 READ FPDMA QUEUED
60 00 08 38 08 18 45 00 00:03:34.775 READ FPDMA QUEUED
Error 1543 occurred at disk power-on lifetime: 7234 hours (301 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 58 08 18 05 Error: UNC at LBA = 0x05180858 = 85461080
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 58 08 18 45 00 00:03:49.446 READ FPDMA QUEUED
60 00 08 50 08 18 45 00 00:03:44.986 READ FPDMA QUEUED
60 00 08 48 08 18 45 00 00:03:41.919 READ FPDMA QUEUED
60 00 08 40 08 18 45 00 00:03:39.544 READ FPDMA QUEUED
60 00 08 38 08 18 45 00 00:03:34.775 READ FPDMA QUEUED
Error 1542 occurred at disk power-on lifetime: 7234 hours (301 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 30 08 18 05 Error: UNC at LBA = 0x05180830 = 85461040
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 80 08 18 45 00 00:03:14.102 READ FPDMA QUEUED
60 00 38 40 08 18 45 00 00:03:14.102 READ FPDMA QUEUED
60 00 18 20 08 18 45 00 00:03:14.102 READ FPDMA QUEUED
60 00 08 10 08 18 45 00 00:03:14.102 READ FPDMA QUEUED
60 00 08 78 08 18 45 00 00:03:13.513 READ FPDMA QUEUED
Error 1541 occurred at disk power-on lifetime: 7234 hours (301 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 30 08 18 05 Error: UNC at LBA = 0x05180830 = 85461040
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 80 08 18 45 00 00:03:14.102 READ FPDMA QUEUED
60 00 38 40 08 18 45 00 00:03:14.102 READ FPDMA QUEUED
60 00 18 20 08 18 45 00 00:03:14.102 READ FPDMA QUEUED
60 00 08 10 08 18 45 00 00:03:14.102 READ FPDMA QUEUED
60 00 08 78 08 18 45 00 00:03:13.513 READ FPDMA QUEUED
Error 1540 occurred at disk power-on lifetime: 7234 hours (301 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 d0 09 9c 02 Error: UNC at LBA = 0x029c09d0 = 43780560
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c8 09 9c 42 00 00:02:52.996 READ FPDMA QUEUED
60 00 08 c0 09 9c 42 00 00:02:52.996 READ FPDMA QUEUED
60 00 08 b8 09 9c 42 00 00:02:52.996 READ FPDMA QUEUED
60 00 08 b0 09 9c 42 00 00:02:52.996 READ FPDMA QUEUED
60 00 08 a8 09 9c 42 00 00:02:52.995 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment