- Based on https://gist.github.com/mdziekon/221bdb597cf32b46c50ffab96dbec08a
- Installation date: 16-08-2019
- Additional notes based on my own experience
- EFI boot
- Ubuntu 19.04 -> 21.04
- This should work on any computer. Only the
RAID > AHCI
change described below and the device name for the nvme ssd drive are specific to this laptop. - The process describes a completely fresh installation with complete repartitioning, however it should work fine when Windows is already installed (eg. brand new machine with Windows preinstalled) as long as Windows already boots with EFI.
- The process was conducted on Dell's XPS 15 9560 (2017) with specs:
- CPU: i7-7700HQ
- Screen: 4K with Touch
- RAM: 32 GB
- Drive: 1TB nvme ssd
- Windows 10 Pro license
- BIOS version: 1.16.0
- Suprisingly, Ubuntu's update manager supports BIOS updates out of the box (make sure you're connected to power then run
sudo fwupdmgr refresh; sudo fwupdmgr update
)
- Suprisingly, Ubuntu's update manager supports BIOS updates out of the box (make sure you're connected to power then run
- My installation did not require to disable TPM nor Secure Boot
If you're re-installing your system and have no need to re-shuffle your partitions, you can jump directly to 4.3.b (the luksOpen
command). Just make sure you re-format all your partitions except for EFI (and perhaps /home
, if like myself you have one).
You'll need to boot first into a ubuntu installation disk (to use gparted to partition your drive), then boot into the windows installation media (to install windows) then back again the ubuntu media (to install ubuntu). So you're going to need to prep either 2 different installation medias (eg usb sticks or DVDs or whatever), or you'll need a second computer to keep overwritting the same usb stick.
- Create Windows installation USB stick
- Download .ISO file from Microsoft's webpage
- Create bootable USB using WoeUSB - do not use Startup Disk Creator utility or the Disks app, won't work for Windows installation media)
- Create Ubuntu installation USB stick
- Download .ISO file from Ubuntu's webpage
- Create bootable USB using "whatever" (gnome disks or Startup Disk Creator utility)
- Go to BIOS (F2) and switch from SSD's "RAID" to "AHCI" mode on some laptop models (like XPS 9560)
Important: There's currently no easy way to make grub work with an encrypted partition. Make sure /boot
and /boot/EFI
are their own partitions and left unencrypted.
- Boot into an ubuntu live cd session
- Open gparted
- Delete all partitions on disk
- Create GPT partition table:
device
>new partition table
> chooseGPT
(this is required for EFI) - Create the following:
- 550MiB FAT32 (label EFI - label is for our own benefit, doesn't actually mark this partition as EFI)
- 550MiB EXT4 (for Linux boot)
- Create your windows partitions as NTFS
- Leave enough unallocated space for Ubuntu. Don't create a partition here yet - Windows needs to automatically create an additional 16MiB partition during installation. Dunno what it is for tbh.
- Apply changes
- Right click on the FAT32 partition you created for EFI partition above >
manage flags
. Setesp
(boot
might auto-check itself too). This will mark the partition to use as EFI by both Windows and Ubuntu installations. You might need to apply changes again.
- Boot from the windows usb pendrive
- Install Windows on whatever partition you created earlier
- Windows is done at this point - you could go in and setup windows (encryption, drivers, etc) but I'd recommend to set up ubuntu first - the process, if done wrong, can potentially bork your set up and you'll need to start again.
-
Boot into ubuntu live cd session
-
Open gparted, create a single ext4 partition with unallocated space. This will be for lvm/luks. The filesystem does not matter, we simply need to create a partition here so that it's allocated a device node and shows in
/dev
). -
Create LUKS container on this partition (assuming the partition device is
/dev/nvme0n1p5
):# Note luksFormat and luksOpen are case sensitive ~ sudo cryptsetup luksFormat /dev/nvme0n1p5 ~ sudo cryptsetup luksOpen /dev/nvme0n1p5 cryptdrive # Optional, rewrite the whole of cryptdrive with crap to ensure no data from before partitioning remains. Took 2h on my 652 GiB partition on an nvme drive ~ sudo dd if=/dev/zero of=/dev/mapper/cryptdrive bs=16M
-
Create LVM physical volume, a volume group & logical volumes:
- Volumes are sized as follows (example, you should create as many partitions as you need):
- OS drive:
60GB
- Swap:
16GB
- Home:
rest
- OS drive:
- Commands (add extra lvcreate steps if you have more partitions):
~ sudo pvcreate /dev/mapper/cryptdrive ~ sudo vgcreate vglinux /dev/mapper/cryptdrive ~ sudo lvcreate -n root -L 60g vglinux ~ sudo lvcreate -n swap -L 16g vglinux ~ sudo lvcreate -n home -l 100%FREE vglinux
- Volumes are sized as follows (example, you should create as many partitions as you need):
-
Start the installation process using GUI:
- Connect to WiFi network
- When asked what to do with the disk, pick the option that allows you to manually repartition stuff (IIRC it was labelled
Something else
on 19.04 installer):- Pick
/dev/mapper/vglinux-root
asext4
FS & mount it to/
- Pick
/dev/mapper/vglinux-home
asext4
FS & mount it to/home
- Pick
/dev/mapper/vglinux-swap
asswap
- Do the same as above if you have extra partitions
- Pick
/dev/nvme0n1p2
(created on step 2.5.1) asext4
FS & mount it to/boot
- Without doing this, installation will fail when configuring GRUB
- Pick "boot drive" (the select list at the bottom, this is where GRUB goes) and assign it to
/dev/nvme0n1p2
or/dev/nvem0n1
- Pick
- Proceed with the installation
-
After GUI installation completes, stay within the Live USB environment
-
Check the UUID of the LUKS drive:
sudo blkid /dev/nvme0n1p5
- Example output:
/dev/nvme0n1p5: UUID="abcdefgh-1234-5678-9012-abcdefghijklm" TYPE="crypto_LUKS"
-
Mount root & boot drives and chroot into the main mount:
~ sudo mount /dev/mapper/vglinux-root /mnt ~ sudo mount /dev/nvme0n1p2 /mnt/boot ~ sudo mount --bind /dev /mnt/dev ~ sudo chroot /mnt ~ mount -t proc proc /proc ~ mount -t sysfs sys /sys ~ mount -t devpts devpts /dev/pts
-
In chroot env, configure
crypttab
allowing to boot Ubuntu with Encryption unlockersudo nano /etc/crypttab
:# <target name> <source device> <key file> <options> # options used: # luks - specifies that this is a LUKS encrypted device # tries=0 - allows to re-enter password unlimited number of times # discard - allows SSD TRIM command, WARNING: potential security risk (more: "man crypttab") # loud - display all warnings cryptdrive UUID=abcdefgh-1234-5678-9012-abcdefghijklm none luks,tries=0,discard,loud
update-initramfs -k all -c
-
Reboot into Ubuntu
- XPS 9560 doesn't really need any workarounds or acpi boot options anymore with Ubuntu 19.04. Have a look https://github.com/stockmind/dell-xps-9560-ubuntu-respin if there's something that doesn't work. No need to download any firmware anymore for the killer wifi (always worked fine for me)
- Install nvidia drivers (latest available in 19.04)
- Undervolt? https://github.com/georgewhewell/undervolt I have a systemd service to run
undervolt.py --core -125 --cache -125 --gpu -100
, helps a little with power consumption and temps, especially under heavy load (around 8-10 deg C).
If you need to reinstall ubuntu, you should be able to jump to #4 directly. If you aren't changing your partition layout, you can go straight to #4.4 (install ubuntu), but don't forget to run sudo cryptsetup luksOpen /dev/nvme0n1p5 cryptdrive
to mount the encrypted partition. If in doubt, just start from #4 and recreate your crypt drive.
- Ubuntu (GRUB) is the default boot option, both Ubuntu and Windows should be there
- Additionally, you can bring up the EFI boot screen pressing F12 as soon as you turn on the laptop
Thanks a bunch for this!
I set up Windows right away. Then went on with Ubuntu. Windows asked my Bitlocker recovery key after installing Ubuntu. Ofc I had it saved and the setup was saved.