Skip to content

Instantly share code, notes, and snippets.

@lukego
Created August 15, 2016 08:51
Show Gist options
  • Save lukego/8b4e567f4d5c4b60da6545e063888391 to your computer and use it in GitHub Desktop.
Save lukego/8b4e567f4d5c4b60da6545e063888391 to your computer and use it in GitHub Desktop.
Mellanox error syndrome lists
BAD_RES_STATE | 0x25B161 | destroy_ctx - context doesn't exist or doesn't match type
BAD_RES_STATE | 0x4A6FC9 | destroy_ctx - context in use
BAD_RES_STATE | 0x60DA55 | destroy_dct - dct not in drained state
BAD_PARAM | 0x67A6F2 | slrg doesnt support write;
BAD_PARAM | 0x0F0E35 | ppamp doesnt support write;
BAD_PKT | 0x4A22F | access reg MAD with specified register id not supported
BAD_PKT | 0x16C592 | mad_ifc: process_smp_lid mkey check failed - silently discarded
INTERNAL_ERR | 0x079233 | set_get_port_info: silently discarded.
BAD_PKT | 0x468496 | mad_ifc: ATTRV_SM_INFO handled by SW
BAD_PKT | 0x071808 | mad_ifc: smp trap repress silently discarded after processing.
BAD_PKT | 0x071809 | mad_ifc: GET_RESP and TRAP method are silently discarded.
BAD_PKT | 0x7ECC11 | mad_ifc: process_cc cc_key check failed
BAD_PKT | 0x4EB0AE | mad_ifc: cc trap repress silently discarded after processing.
BAD_PKT | 0x3D89EB | mad_ifc: hca is not active
BAD_PARAM | 0x6E0A69 | access_register PPAD: supported only with fpp enabled
BAD_PARAM | 0x1CD13E | access_register PPAD: local port reserved when single_mac=0.
BAD_PARAM | 0x1CC031 | access_register PPAD: invalid port
BAD_PARAM | 0x04E66D | access_register PPAD: invalid port
BAD_PARAM | 0x231E68 | access register PPAMP: invalid access
BAD_PARAM | 0x4D69AC | access register SLRG: invalid access
BAD_PARAM | 0x6217C2 | invalid access;
BAD_PARAM | 0x369C99 | invalid access ;
BAD_PARAM | 0x4497BE | invalid access
BAD_PARAM | 0x7203E5 | access_register PAOS: invalid port
BAD_PARAM | 0x09A9FB | access register PAOS: paos_query invalid swid
BAD_PARAM | 0x7D10EF | access_register PAOS: invalid port
BAD_PARAM | 0x51BF55 | access_register PAOS: invalid admin_status;
BAD_PARAM | 0x6E2A11 | access register PAOS: paos_query invalid swid
BAD_PARAM | 0x43A7AF | access register PAOS: invalid admin status
BAD_PARAM | 0x33EDC5 | access_register PMTU: invalid port
BAD_PARAM | 0x49B0F2 | access_register PTYS: invalid port
BAD_PARAM | 0x7CD836 | PTYS: invalid protocol mask value
BAD_PARAM | 0x2FDE74 | access_register PMTU: invalid port
BAD_PARAM | 0x648AFC | PMTU: admin MTU given is greater than device's max MTU
BAD_PARAM | 0x57ACCD | PMTU: admin MTU given is not a valid IB spec MTU
BAD_PARAM | 0x143B37 | access_register PTYS: invalid port
BAD_PARAM | 0x208984 | PTYS: invalid protocol mask value
BAD_PARAM | 0x7B9543 | access_register PVLC: invalid port
BAD_PARAM | 0x087016 | PVLC: port is not IB.
BAD_PARAM | 0x4B4004 | reserved fields are not zero (1st DW)
BAD_PARAM | 0x4E0B36 | reserved fields are not zero (2nd DW)
BAD_PARAM | 0x70BE33 | bad op_mod
BAD_PARAM | 0x0C6B73 | reserved fields are not zero (4th DW)
BAD_INPUT_LEN | 0x672230 | bad input length
BAD_OUTPUT_LEN | 0x7C331E | bad output length
BAD_PARAM | 0x17B535 | reserved fields are not zero 3rd DW*/
BAD_INPUT_LEN | 0x6CE368 | get_dropped_packet_log: bad input length
BAD_OUTPUT_LEN | 0x7BF634 | get_dropped_packet_log: bad output length
BAD_SYS_STATE | 0x256AF0 | TODO FPP
BAD_INPUT_LEN | 0x279651 | init_hca: bad input length
BAD_PARAM | 0x306FFF | init_hca: reserved fields are not zero (3rd DW)
BAD_PARAM | 0x21E00A | init_hca: bad op_mod
BAD_PARAM | 0x7DD100 | reserved fields are not zero 1st DW
BAD_PARAM | 0x626483 | reserved fields are not zero 2nd DW
BAD_PARAM | 0x204BB3 | reserved fields are not zero 3rd DW
BAD_PARAM | 0x0DBB21 | reserved fields are not zero 4th DW
BAD_PARAM | 0x1B7325 | create_query_mkey: reserved fields are not zero 1st DW
BAD_PARAM | 0x0CAE4B | create_query_mkey: reserved fields are not zero 2nd DW
BAD_PARAM | 0x3F03F8 | create_query_mkey: reserved fields are not zero 3rd DW
BAD_PARAM | 0x6EE6D8 | create_query_mkey: reserved fields are not zero 4th DW
BAD_PARAM | 0x18E774 | create/modify eq/cq (resize): log_cq_size > LOG_MAX_EQCQ_SIZE
BAD_PARAM | 0x6AA71A | create/modify eq/cq (resize): bad cq size. Only 64B, 128B supported
BAD_PARAM | 0xAC4144 | create/modify eq/cq (resize): page offset must be 0
BAD_INPUT_LEN | 0x9074AA | create/modify eq/cq (resize): bad input length
BAD_OUTPUT_LEN | 0x38AEDB | create/modify eq/cq (resize): bad output length
BAD_PARAM | 0x7FAB49 | create eq/cq: bad opcode modifier
BAD_PARAM | 0x4C4269 | create eq/cq: state is reserved.
BAD_PARAM | 0x4BF94B | create eq/cq: consumer_counter != 0
BAD_PARAM | 0x6F7FB3 | create eq/cq: producer_counter != 0
BAD_PARAM | 0x397E61 | create eq/cq: bad uar number
BAD_PARAM | 0x67C01E | create eq: bad msix number
BAD_PARAM | 0x571493 | create eq: intr is reserved when msix isn't enabled
BAD_PARAM | 0x008FEF | create_eq: unsupported event type
BAD_RESOURCE | 0x601D5F | destroy_cq: attempt to access reserved cqn
BAD_PARAM | 0x11145F | destroy_cq: bad op_mod
BAD_RESOURCE | 0x01A08D | destroy_eq: attempt to access reserved eqn
BAD_RES_STATE | 0x1D7771 | modify_cq: bad cq number - cq doesn't exist
BAD_RESOURCE | 0x55AD7A | modify_cq: attempt to access reserved cqn
BAD_RES_STATE | 0x2F1396 | modify_cq: cq is in error state and cannot be modified
BAD_INPUT_LEN | 0x2BA264 | modify_cq bad input length
BAD_INPUT_LEN | 0x244364 | resize cq bad input length
BAD_PARAM | 0x101EE5 | int_moderation: bad op_mod
BAD_RESOURCE | 0x3B024B | int_moderation: attempt to access non exsistent msi-x
BAD_INPUT_LEN | 0x4DF3DC | create mkey: bad input length
BAD_PARAM | 0x44D3A3 | create mkey: bad opcode modifier.
BAD_PARAM | 0x60D3DE | create mkey: illegal access_mode
BAD_PARAM | 0x5038AD | create mkey: bsf is not supported
BAD_PARAM | 0x2225F2 | create mkey: signature is not supported
BAD_PARAM | 0x3B1B20 | create mkey: bsf is not supported
BAD_PARAM | 0x10301E | create mkey: max bsf_octword_size supported is 256K
BAD_PARAM | 0x56DD41 | create mkey: max translations_octword_size supported is 2G (max num of mtts is 4G)
BAD_PARAM | 0x5F4568 | create mkey: octoword_actual_size bigger than translations_octword_size
BAD_PARAM | 0x3783F6 | create mkey: PA mode with translations_octword_size > 0
BAD_PARAM | 0x03BF6F | create mkey: translations_octword_size == 0 and not PA mode.
BAD_PARAM | 0x0380C1 | create mkey: NO PA mode, MR not free but no mtts was given
BAD_PARAM | 0x25A977 | create mkey: MR free and umr_en disable
BAD_PARAM | 0x772CF9 | create mkey: length is bigger than 2^64
BAD_PARAM | 0x66E7E8 | create mkey: wrong page size
BAD_PARAM | 0x10A58D | create mkey: window size exceed translations_octword_size
BAD_PARAM | 0x5B31FA | create mkey: not enough mtts in the mail box.
BAD_PARAM | 0x776E2C | create mkey: wrong page size should be reserved in KLM/PA mode
BAD_PARAM | 0x105B45 | create_mkey: pg_access is valid only for access_mode MTT
BAD_INPUT_LEN | 0x052FD5 | query_mkey: bad input length
BAD_OUTPUT_LEN | 0x24EF33 | query_mkey: bad output length
BAD_PARAM | 0x247885 | query_mkey: bad opcode modifier
BAD_PARAM | 0x68BFFD | query_mkey: bad opcode modifier
BAD_RES_STATE | 0x15B0BA | query_mkey: bad mkey index
BAD_RESOURCE | 0x6F23F2 | query_mkey: attempt to access reserved mkey
BAD_PARAM | 0x2F3DC3 | query_mkey: pg_access does not match mkey pg_access
BAD_RES_STATE | 0x23528A | query context/page_fault_resume: bad context number
BAD_RESOURCE | 0x7D55AA | query context/page_fault_resume: attempt to access reserved context number
BAD_OUTPUT_LEN | 0x3676F2 | query context/page_fault_resume: bad output length
BAD_PARAM | 0x6DB4DA | query context/page_fault_resume: bad opcode modifier
BAD_INPUT_LEN | 0x3249FD | page_fault_resume: bad input length
BAD_PARAM | 0x10CD65 | qp_page_fault_resume: bad opcode modifier
BAD_RES_STATE | 0x3D5E24 | unexpected page_fault_resume_cmd (no event sent from FW)
BAD_INPUT_LEN | 0x2FC801 | create_psv: bad input length
BAD_OUTPUT_LEN | 0x36918C | create_psv: bad output length
BAD_PARAM | 0x4F5495 | create_psv: bad opcode modifier
BAD_PARAM | 0x1F7A7F | create_psv: num of psv is 0
BAD_PARAM | 0x4CB25F | create_psv: num of psv is 3
BAD_PARAM | 0x0C1415 | create_psv: num of psv > 4
BAD_PARAM | 0x6B87EC | create_psv: reserved fields are not zero DW1
BAD_PARAM | 0x19FE3C | create_psv: reserved fields are not zero DW2
BAD_PARAM | 0x27D2DF | create_psv: reserved fields are not zero DW3
BAD_PARAM | 0x7D1C5F | create_psv: reserved fields are not zero DW4
BAD_RESOURCE | 0x179B25 | destroy_psv: attempt to access reserved psv index
BAD_PARAM | 0x4AD785 | destory_psv: opcode_mod != 0
BAD_RES_STATE | 0x4FF64E | destory_psv: psv does not exist.
BAD_INPUT_LEN | 0x5B7B17 | query_psv: bad input length
BAD_OUTPUT_LEN | 0x14AAFD | query_psv: bad output length
BAD_PARAM | 0x28A1A6 | query_psv: bad opcode modifier
BAD_RESOURCE | 0x19A866 | query_psv: attempt to access reserved psv index
BAD_RES_STATE | 0x3A1317 | query_psv: psv does not exist.
BAD_RES_STATE | 0x12E4A1 | query_eq/gen_eqe: bad eqn
BAD_RESOURCE | 0x3A12ED | query_eq/gen_eqe: attempt to access reserved eq number
BAD_OUTPUT_LEN | 0x5BA99E | query_eq: bad output length
BAD_PARAM | 0x6908EC | query_eq: bad opcode modifier
BAD_OUTPUT_LEN | 0x47E299 | query_cq: bad output length
BAD_PARAM | 0x44C59F | query_cq: bad opcode modifier
BAD_RES_STATE | 0x1FB6EC | query_cq: bad qp index
BAD_PARAM | 0x537E97 | dc_access option valid only for DC
BAD_PARAM | 0x60D2F5 | qp commands: (Q_KEY) is supported just in UNCONNECTED mode.
BAD_PARAM | 0x3670A5 | (alt_addr_path, rwe, pm_state) supported just in static connected.
BAD_PARAM | 0x4DC4E4 | (ack_timeout/rnr_retry/retry_count/log_sra_max/rae) is supported just in reliable mode.
BAD_PARAM | 0x25DF13 | (rre/min_rnr_nak/log_rra_max) is supported just in static reliable mode
BAD_PARAM | 0x58CC13 | srq number bit is reserved if rq type != srq.
BAD_PARAM | 0x3BAC66 | srq number bit is reserved in xrc mode.
BAD_PARAM | 0x3836FE | xrc qp does not need receive cq
BAD_PARAM | 0x6C4351 | qp without receive queue does not need receive cq.
BAD_PARAM | 0x65EB34 | pm_state cannot be change in special qp
BAD_PARAM | 0x76EE96 | port cannot be change in special qp
BAD_PARAM | 0x5FF312 | sl cannot be change in special qp
BAD_PARAM | 0x43104D | special qp does not have secondary_address_path
BAD_PARAM | 0x1DB648 | address_path.f_dscp is RoCE unconnected only
BAD_PARAM | 0x66375B | address_path.f_ecn is RoCE unconnected only
BAD_PARAM | 0x3025D0 | address_path.f_eup is RoCE unconnected only
BAD_PARAM | 0x2E015A | address_path.rmac_47_32 is RoCE connected only
BAD_PARAM | 0x53A33C | address_path.rmac_31_0 is RoCE connected only
BAD_PARAM | 0x7FD2B9 | address_path.udp_sport is RoCE connected only
BAD_PARAM | 0x7A4E3E | address_path.ecn is RoCE only
BAD_PARAM | 0x57527E | address_path.dscp is RoCE only
BAD_PARAM | 0x192112 | address_path.dei_cfi is RoCE only
BAD_PARAM | 0x72B104 | address_path.prio is RoCE only
BAD_PARAM | 0x270173 | address_path.pkey_index is reserved for RoCE
BAD_PARAM | 0x0A3AF1 | address_path.sl is reserved for RoCE
BAD_PARAM | 0x2AFB5D | address_path.fl is IB native connected only field
BAD_PARAM | 0x584EFC | address_path.mlid is IB native_connected only field
BAD_PARAM | 0x1F3B5D | address_path.rlid is IB native connected only field
BAD_PARAM | 0x1796E4 | address_path.grh is IB native connected only field
BAD_PARAM | 0x08DE6B | address_path.src_addr_index is reserved for UD/DCI/no GRH
BAD_PARAM | 0x32E7BB | address_path.hop_limit is reserved for UD/DCI/no GRH
BAD_PARAM | 0x69216A | address_path.flow_label is reserved for UD/DCI/ no GRH
BAD_PARAM | 0x764216 | address_path.tclass is reserved for UD/DCI/ no GRH
BAD_PARAM | 0x7812D7 | address_path.rgid_rip is reserved for UD/DCI
BAD_PARAM | 0x29E0DF | address_path.udp_sport is not in the range defined by hca_cap
BAD_PARAM | 0x1FFEA3 | address_path.udp_sport is reserved for roce v1 and v1.5
BAD_PARAM | 0x1A58FB | address_path.ecn is reserved for roce v1
BAD_PARAM | 0x632491 | address_path.dscp is reserved for roce v1
BAD_PARAM | 0x3620D8 | rwe valid in static connected qp only
BAD_PARAM | 0x36C5D1 | rae valid in reliable qp only
BAD_PARAM | 0x7D9D73 | rae valid in RC/XRC qp only
BAD_PARAM | 0x5D447D | dc msg_max > dcr_msg_max
BAD_PARAM | 0x00BF9B | init2rtr: bad msg_max
BAD_PARAM | 0x2B9ADC | init2rtr: non default vport must use set grh (grh bit)
BAD_PARAM | 0x7158C4 | init2rtr: remote_qpn is valid in static connected node only
BAD_PARAM | 0x7F56A9 | next_rcv_psn field is reserved for dci/unconnected qp
BAD_PARAM | 0x390BD3 | init2rtr: min_rnr_nak field is reserved for dci/unconnected qp
BAD_PARAM | 0x382E4C | illegal pm_state
BAD_PARAM | 0x20FD05 | illegal pm_state transition. APM_STATE_MIGRATED can only be changed to APM_STATE_REARM
BAD_PARAM | 0x1AED84 | illegal pm_state transition. While in APM_STATE_REARM, only HW can modify pm_state
BAD_PARAM | 0x106230 | illegal pm_state transition. APM_STATE_ARMED can only be changed to APM_STATE_MIGRATED
BAD_PARAM | 0x2C4432 | bad mtu (==0)
BAD_PARAM | 0x434F5F | bad mtu enumeration mtu in [1..5]
BAD_PARAM | 0x15C162 | primary_path pkey_index is larger than device cap
BAD_PARAM | 0x100715 | primary_path pkey_index is reserved for RoCE
BAD_PARAM | 0x2E31D2 | alternate_path pkey_index is larger than device cap
BAD_PARAM | 0x476916 | QP1: q_key must be 0x80010000
BAD_PARAM | 0x069EFE | atomic_mode must comes with rae change
BAD_PARAM | 0x576363 | atomic_mode is reserved without rae
BAD_PARAM | 0x4CF067 | atomic_mode is greater than max supported
BAD_PARAM | 0x3DB8C9 | dc extended atomic > dcr_extended_atomic
BAD_PARAM | 0x177405 | qp commands : bad port number
BAD_PARAM | 0x5021A1 | qp commands : alternate_path - bad port number
BAD_PARAM | 0x2672B8 | dc rra_max is reserved in dci qp
BAD_PARAM | 0x6DA61B | rra_max > hca_cap.log_max_ra_res
BAD_PARAM | 0x285837 | dc log_sra_max > hca_cap.log_max_ra_req_dc
BAD_PARAM | 0x0B673F | log_sra_max > hca_cap.log_max_ra_req
BAD_RESOURCE | 0x4AF0EB | modify_qp: cannot use cq in XRC mode
BAD_INPUT_LEN | 0x12661C | create qp: bad input length
BAD_PARAM | 0x11EB32 | create_qp: bad opcode_modifier
BAD_PARAM | 0x02DCDC | create_qp: un aligned dbr_adr
BAD_PARAM | 0x28B996 | create_qp: bad service type
BAD_PARAM | 0x48B5C0 | create_qp: invalid service type for RoCE
BAD_PARAM | 0x311E80 | create_qp: bad rq_type.
BAD_PARAM | 0x7FC507 | create_qp: bad rq_type, XRC must come with rq_type srq
BAD_PARAM | 0x30CB3E | create qp: bad uar number
BAD_PARAM | 0x397FA9 | create_qp: DC is not supported in hca cap configuration.
BAD_PARAM | 0x410975 | create_qp: bad rq_type, DC must be srq
BAD_PARAM | 0x344C32 | create_qp: bad cs_req (must be 0x22/0x0)
BAD_PARAM | 0x690D51 | create_qp: fre not allowed in MLX mode
BAD_PARAM | 0x6DCF3A | create_qp: bad log_rq_stride > 5.
BAD_PARAM | 0x283F1A | create_qp: bad log_rq_size and log_rq_stride
BAD_PARAM | 0x33BC5A | create_qp: log_rq_stride is reserved when rq_type != regular
BAD_PARAM | 0x41B867 | create_qp: log_rq_size is reserved when rq_type != regular
BAD_PARAM | 0x27D5A7 | create_qp: cd slave enable must come with rq_type regular.
BAD_PARAM | 0x735349 | create qp: opt_param_mask !=0
BAD_PARAM | 0x6897E7 | qpc state != 0
BAD_PARAM | 0x6DD6F3 | sw_sq_wqebb_counter - query only
BAD_PARAM | 0x55B9EB | hw_sq_wqebb_counter - query only
BAD_PARAM | 0x57D8C2 | hw_rq_counter_hw_rcyclic_byte_counter - query only
BAD_PARAM | 0x2FD215 | sw_rq_counter_sw_rcyclic_byte_counter -query only
BAD_PARAM | 0x7698D9 | create_qp: no sq -> log_sq_size is reserved.
BAD_PARAM | 0x317227 | create_qp: sq_size > MAX_QP_SIZE
BAD_PARAM | 0x302CBD | create_qp: rq_size > MAX_QP_SIZE
BAD_PARAM | 0x7BE362 | create_qp : bad cs_res
BAD_PARAM | 0x3F86E4 | create_qp: bad cs_req
BAD_PARAM | 0x3ADA02 | create_qp: bad cs_res need to be != 0x1 in UD/MLX/DC mode
BAD_PARAM | 0x327D8F | create_qp: atomic_like_write_en valid in connected mode only when ts!=DCI.
BAD_PARAM | 0x567DA3 | create_qp: bad cs_res: reserved in DCI case.
BAD_PARAM | 0x11ED19 | create_qp: bad cs_res 0x2 not supported in UD when cgs=0x0
BAD_PARAM | 0x1FF868 | create_qp: cgs is reserved for non-UD QPs
BAD_PARAM | 0x2D2509 | create_qp: block_lb_mc only supported on unconnected service types
BAD_PARAM | 0x05A897 | create_qp: cs_req valid in connected mode only.
BAD_PARAM | 0x7E70FD | create_qp: reserved not zero.
BAD_PARAM | 0x7D7C6E | SYNC_UMR must come with rq type == no_rq.
BAD_PARAM | 0x1F187A | create_qp: free_ar cannot be set in reliable qp.
BAD_PARAM | 0x228DD9 | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id 0x0 is reserved
BAD_PARAM | 0x68E078 | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id > max counter_set_id
BAD_PARAM | 0x01507C | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id doesn't exist
BAD_PARAM | 0x3E0D16 | create_dct: bad opcode_modifier
BAD_PARAM | 0x0E3FAC | create_dct: DC is not supported in hca cap configuration.
BAD_PARAM | 0x210B13 | create_dct: state field is reserved during create
BAD_PARAM | 0x27DA36 | create_dct: bad port number
BAD_PARAM | 0x2E4253 | create_dct: dc_access_key_violation_count is reserve during create
BAD_PARAM | 0x6F14CE | create_dct: when rae=1, atomic_mode must be != 0
BAD_PARAM | 0x56763A | create_dct: atomic_mode is reserved without rae
BAD_PARAM | 0x0AA52F | create_dct: bad cs_res
BAD_PARAM | 0x319166 | create_dct: bad mtu enumeration
BAD_PARAM | 0x29B3F4 | DCT pkey_index is larger than device cap
BAD_OP | 0x441CC5 | bad opcode
BAD_RESOURCE | 0x671120 | modify_qp/arm_rq/arm_dct/mcg command: attempt to access reserved qpn number
BAD_RESOURCE | 0x21FA8C | modify_qp/arm_rq/arm_dct/mcg command: attempt to access reserved qpn number
BAD_RES_STATE | 0x355534 | modify_qp/arm_rq/arm_dct/mcg command: invalid qp number.
BAD_PARAM | 0x78DA49 | manage_pages: opcode modifier > 2
BAD_INPUT_LEN | 0x1275FD | manage_pages: bad input length
BAD_OUTPUT_LEN | 0x31F42C | manage_pages: bad output length
BAD_PARAM | 0x6D5FE7 | manage_pages: reserved fields are not zero
BAD_PARAM | 0x557FCD | manage_pages: reserved fields are not zero
BAD_PARAM | 0x453913 | manage_pages: reserved fields are not zero
BAD_SYS_STATE | 0x278A55 | set_hca_cap: can be execute just before init_hca.
BAD_INPUT_LEN | 0x7A2865 | Query HCA capabilities: bad input length
BAD_PARAM | 0x30A05D | set_hca_cap: bad log_uar_page_sz
BAD_PARAM | 0x5B724A | set_hca_cap: bad log_max_qp
BAD_PARAM | 0x2381FC | set_hca_cap: bad log_max_ra_req_qp
BAD_PARAM | 0x0974DA | set_hca_cap: bad log_max_ra_res_qp
BAD_PARAM | 0x5A4D4A | set_hca_cap: bad pkey_table_size
BAD_PARAM | 0x722D0B | set_hca_cap: bad gid_table_size
BAD_PARAM | 0xC324D1 | set_hca_cap: DC is not supported for VFs
BAD_PARAM | 0x403D24 | access_register: perf_counters global bad cmd field > 1
BAD_PARAM | 0x570B1F | access_register: perf_counters cfg bad uint_id
BAD_PARAM | 0x0BBD5E | access_register: perf_counters cfg bad uint_id
BAD_PARAM | 0x08D521 | access_register: perf_counters cfg bad cnt_cmd
BAD_PARAM | 0x32ACF2 | access_register: perf_counters data bad uint_id
BAD_PARAM | 0x21410C | access_register: perf_counters data bad uint_id
BAD_PARAM | 0x00466E | access_register port capabilities: bad port number
BAD_PARAM | 0x478688 | access_register port capabilities: reserved not zero 1st DW
BAD_PARAM | 0x1FB867 | access_register port capabilities: reserved not zero 1st DW
BAD_PARAM | 0x7936EB | access_register loopback ctrl: reserved not zero
BAD_PARAM | 0x5C91E6 | access_register loopback ctrl: bad port number
BAD_PARAM | 0x381614 | access_register loopback ctrl: reserved not zero 1st DW
BAD_PARAM | 0x123FB8 | access_register loopback ctrl: reserved not zero 1st DW
BAD_PARAM | 0x087224 | access_register loopback ctrl: reserved not zero 2st DW
BAD_PARAM | 0x3CF1FE | access_register loopback ctrl: reserved not zero 3rd DW
BAD_PARAM | 0x6BFEB4 | access_register loopback ctrl: reserved not zero 4th DW
BAD_PARAM | 0x0B1ED8 | access_register register_pplr illegal port number
BAD_PARAM | 0x0B7411 | access_register power_settings: power_settings_level 0x1-0xfe are reserved
BAD_PARAM | 0x74A88B | access_register power_settings: reserved not zero 1st DW
BAD_PARAM | 0x023A2E | access_register power_settings: reserved not zero 2st DW
BAD_PARAM | 0x4ED3CB | access_register power_settings: reserved not zero 3rd DW
BAD_PARAM | 0x471D6E | access_register power_settings: reserved not zero 4th DW
BAD_PARAM | 0x1910BB | access_register: misc_counters counter data should be 0 on write
BAD_PARAM | 0x305A09 | access_register: misc_counters write with no counter_select
BAD_PARAM | 0x54FAAA | access_register_qpdp_qtct : illegal link layer type
BAD_PARAM | 0x54EACD | access_register_qpdp_qtct : insufficient privileges
BAD_PARAM | 0x54EACC | access_register_qtct_qpdp : unsupported project
BAD_PARAM | 0x326553 | access_register_qetcr : illegal link layer type
BAD_PARAM | 0x326CCD | access_register_qetcr : insufficient privileges
BAD_PARAM | 0x326EF6 | access_register_qetcr : illegal max_bw_units
BAD_PARAM | 0x326EF1 | access_register_qetcr : illegal max_bw_alloc
BAD_PARAM | 0x326555 | access_register_qetcr : illegal tcg
BAD_PARAM | 0x326554 | access_register_qetcr : unsupported project
BAD_SYS_STATE | 0x0523AB | access_register: cannot access this register_id after init hca
BAD_SYS_STATE | 0x192DEB | access_register: cannot access this register_id before init hca
BAD_PARAM | 0x2C16B3 | access_register: reset_counter bad opcode modifyer
BAD_PARAM | 0x24246C | access_register: DB threshold opcode modifyer, legal values 0,1
BAD_PARAM | 0x6F66BA | access_register PVLC port check: invalid port number
BAD_PARAM | 0x603397 | access_register PVLC port check: register only supported for IB
BAD_PARAM | 0x6C4D48 | this access_register isn't supported yet
BAD_INPUT_LEN | 0x6D5541 | access_register: bad input length
BAD_OUTPUT_LEN | 0x0CFF83 | access_register: bad output length
BAD_PARAM | 0x33CF00 | create_rq/rmp: end_pad_mode must be <= 1
BAD_PARAM | 0x6AAEBB | create_rq/rmp: log2_hds_buf_size not supported
BAD_PARAM | 0x68D9B8 | create_rq/rmp: hds_skip_first_sge not supported
BAD_PARAM | 0x6A3698 | create_rq/rmp: lwm is not supported
BAD_PARAM | 0x3B8510 | create_rq/rmp: dbr address must be dword aligned
BAD_PARAM | 0x3E8512 | create_rq/rmp: cd_slave is reserved
BAD_PARAM | 0x3B8512 | create_rq/rmp: uar_page is reserved
BAD_PARAM | 0x293DA6 | create_rq/rmp: log wq stride max value is 9
BAD_PARAM | 0x04D77A | create_rq/rmp: rq_size > MAX_QP_SIZE
BAD_PARAM | 0x193DA6 | create_rq/rmp: log wq stride for rq must be at least 4
BAD_PARAM | 0x5049A9 | create_rq/rmp: log wq stride for rq with ctrl must be at least 5
BAD_PARAM | 0x0642F0 | two_byte_shift_en is valid only in striding rq
BAD_PARAM | 0x48A79B | log_wqe_num_of_strides is valid only in striding rq
BAD_PARAM | 0x0443C8 | log_wqe_stride_size is valid only in striding rq
BAD_PARAM | 0x184CB3 | create_rq/rmp: log wq stride for rq linked list must be at least 5
BAD_PARAM | 0x37F414 | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for rq linked list
BAD_PARAM | 0x07791B | two_byte_shift_en is valid only in striding rq
BAD_PARAM | 0x528685 | log_wqe_num_of_strides is valid only in striding rq
BAD_PARAM | 0x4443F1 | log_wqe_stride_size is valid only in striding rq
BAD_PARAM | 0x2ECC0E | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for cyclic striding rq
BAD_PARAM | 0x183317 | create_rq: log wq stride for striding rq must be at least 5
BAD_PARAM | 0x1CF9D6 | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for linked list striding rq
BAD_PARAM | 0x52D912 | create_rq: log wq stride for striding rq must be at least 5
BAD_PARAM | 0x4ADF4E | create_rq/rmp: invalid wq_type
BAD_OP | 0x032626 | create rmp: not supported for issi = 0
BAD_OUTPUT_LEN | 0x035623 | create rmp: bad output length
BAD_PARAM | 0x1049E2 | create rmp: bad opcode modifier
BAD_PARAM | 0xAD604A | create_rmp: only state RDY is supported
BAD_OP | 0x032624 | create srq: not supported for issi != 0
BAD_OP | 0x032625 | create xrc_srq: not supported for issi = 0
BAD_INPUT_LEN | 0x032623 | create srq: bad input length
BAD_PARAM | 0x2049E2 | srq commands : bad opcode modifier
BAD_PARAM | 0x111A3F | srq commands: srq buffer too big log_srq_size > LOG_MAX_SRQ_SIZE
BAD_PARAM | 0x011C9D | srq commands: srq buffer too small
BAD_PARAM | 0x220743 | srq commands: srq stride too small
BAD_PARAM | 0x009A93 | srq commands: srq stride too big
BAD_PARAM | 0x20239C | srq commands: srq state is reserved.
BAD_PARAM | 0x1DD605 | srq commands: srq.lwm reserved on create
BAD_PARAM | 0x49D322 | srq commands: srq.wqe_cnt reserved on create
BAD_PARAM | 0x441D01 | srq commands: basic_cyclic_rcv_wqe not supported
BAD_RESOURCE | 0x1B118E | query_srq/arm_srq: attempt to access reserved srqn
BAD_RES_STATE | 0x785B7D | query_srq/arm_srq: bad srq index
BAD_OP | 0x031624 | query srq: not supported for issi != 0
BAD_OUTPUT_LEN | 0x4B57A5 | query_srq: bad output length
BAD_PARAM | 0x65FE9A | query_srq: bad opcode modifier
BAD_OUTPUT_LEN | 0x4B57A6 | query_rmp: bad output length
BAD_PARAM | 0x65FE96 | query_rmp: bad opcode modifier
BAD_OP | 0x5937D1 | bad opcode.
BAD_INPUT_LEN | 0x21D355 | create_psv: bad input length
BAD_PARAM | 0x65CBA5 | illegal mcg - bits 127:120 must be 0xff
BAD_PARAM | 0x3B3207 | can't attach qp with connected transport type to mcg
BAD_INPUT_LEN | 0x3822D9 | generate_eqe: bad input length
BAD_OUTPUT_LEN | 0x0697FB | generate_eqe: bad output length
BAD_OP | 0x2BC31B | bad opcode.
BAD_PARAM | 0x55DFA3 | bad op_mod
BAD_OUTPUT_LEN | 0x47D8A0 | arm_rq: bad output length
BAD_PARAM | 0x0D6045 | arm_rq: (opcode mod == 0)
BAD_OUTPUT_LEN | 0x4ED8A0 | modify_rmp: bad output length
BAD_PARAM | 0x0D604E | modify_rmp: opcode_mode is reserved
BAD_PARAM | 0x0D604A | modify_rmp: only state RDY is supported
BAD_PARAM | 0x0D123B | modify_rmp: only bit 0 in modify_bitmask is valid
BAD_OUTPUT_LEN | 0x347AD9 | arm_dct_for_key_violation: bad output length
BAD_PARAM | 0x79876F | arm_dct_for_key_violation: (opcode mod != 0)
BAD_INPUT_LEN | 0x0166EB | set_mad_demux: bad input length
BAD_INPUT_LEN | 0x45E8DB | query_vport_counter: bad input length
BAD_OUTPUT_LEN | 0x7F4257 | query_vport_counter: bad output length
BAD_PARAM | 0x0F5C3F | query_vport_counter: op_mod is reserved
BAD_INPUT_LEN | 0x7F403F | rst2init_qp: bad input length
BAD_PARAM | 0x42D0D3 | rst2init_qp: bad opcode modifier
BAD_PARAM | 0x51C12E | rst2init_qp: opt_param_mask != 0
BAD_RES_STATE | 0x0E5ACC | rst2init_qp: invalid qp number.
BAD_QP_STATE | 0x22D561 | rst2init_qp: qp is not in reset state
RESOURCE_BUSY | 0x5D75A3 | activate_tracer: hw tracer is already used by code coverage
BAD_PARAM | 0x15A5F8 | activate_tracer: bad_mkey, cannot be used for address translation
BAD_PARAM | 0x0B6F45 | activate_tracer: bad mkey, length must be 4K aligned
BAD_PARAM | 0x0B6F44 | activate_tracer: bad mkey, local write is not enabled
RESOURCE_BUSY | 0x60DF34 | activate_tracer: tracer is already activated
BAD_PARAM | 0x46D451 | vport commands: insufficient privileges
BAD_PARAM | 0x35E4FF | vport commands: bad port_number. vport number is too high
BAD_PARAM | 0x0754A4 | vport commands: bad port_number, vport number must be 0 if input_other_vport is not set.
BAD_INPUT_LEN | 0x7CF9E6 | create sq: bad input length
BAD_PARAM | 0x551925 | create_sq: bad opcode_modifier
BAD_PARAM | 0x4E4B51 | create_sq: sq state must be RST
BAD_PARAM | 0x17A194 | create_sq: dbr_address must be dword aligned
BAD_PARAM | 0x5F5A07 | create_sq: wq_type must be 1
BAD_PARAM | 0x27A8E4 | create_sq: sq_size > MAX_QP_SIZE
BAD_PARAM | 0x0AC270 | create_sq: bad uar number
BAD_PARAM | 0x111FE2 | create_sq: wq stride must be precisely 6
BAD_PARAM | 0x162D0B | create_sq: max tis_lst_sz is 1
BAD_PARAM | 0x1B2418 | create_sq: tis_num_0 is reserved for tis_lst_sz=0
BAD_PARAM | 0x02974A | create_sq: allow_multi_pkt_send_wqe is not supported
BAD_PARAM | 0x2B4746 | create_sq: sq.min_wqe_inline_mode must be >= nic_vport.min_sq_wqe_inline_mode
BAD_INPUT_LEN | 0x9CF9E6 | modify sq: bad input length
BAD_PARAM | 0x551995 | modify_sq: bad opcode_modifier
BAD_RESOURCE | 0x60CD18 | modify_sq: resource is not valid
BAD_PARAM | 0x51CFBC | modify_sq: input sq_state does not match current state
BAD_PARAM | 0x51CFB0 | modify_sq: err2rdy state transition is not supported
BAD_PARAM | 0x5333B0 | modify_sq: rst2err state transition is not supported
BAD_PARAM | 0x671AB1 | modify_sq: modify_bitmask is reserved
BAD_INPUT_LEN | 0x754762 | create_rq: bad input length
BAD_PARAM | 0x57CFFB | create_rq: bad opcode_modifier
BAD_PARAM | 0x724AEC | create_rq: rq state must be RDY
BAD_PARAM | 0x71CE3F | create_rq: RMP is not supported
BAD_PARAM | 0x3BD828 | create_rq: undefined wq_type
BAD_INPUT_LEN | 0x6CF9E6 | modify rq: bad input length
BAD_PARAM | 0x551965 | modify_rq: bad opcode_modifier
BAD_RESOURCE | 0x671AD0 | modify_rq: resource is not valid
BAD_PARAM | 0x669FBA | modify_rq: rst2err state transition is not supported
BAD_PARAM | 0x51CFBA | modify_rq: err2rdy state transition is not supported
BAD_PARAM | 0x7ACDB1 | modify_rq: support vsd and lwm changes only
BAD_PARAM | 0x24A3B1 | modify_rq: vsd/lwm change is allowed only for rst2rdy, rdy2rdy
BAD_RES_STATE | 0x46311B | modify_tis: invalid tis number
BAD_INPUT_LEN | 0x492E95 | modify_tis: bad input length
BAD_PARAM | 0x374B62 | modify_tis: bad opcode modifier
BAD_PARAM | 0x538B5F | create/modify_rqt: rqt_max_size > MAX_RQT_SIZE
BAD_PARAM | 0x538FAF | create/modify_rqt: rqt_actual_size > rqt_max_size
BAD_PARAM | 0x538FAB | create/modify_rqt: rqt actual size must be a power of 2
BAD_PARAM | 0x538FCB | create/modify_rqt: rqt max size must be a power of 2
BAD_PARAM | 0x539FDB | create/modify_rqt: rqt size must be > 0
BAD_PARAM | 0x698B5F | modify_rqt: only bit 0 is valid in modify_bitmask
BAD_INPUT_LEN | 0x0DE7A0 | create_tis: bad input length
BAD_PARAM | 0x6A5278 | create_tis: bad opcode modifier
BAD_PARAM | 0x709018 | create modify tir: bad opcode_modifier
BAD_PARAM | 0x4C0EC1 | create tir: disp_type value can be 0 or 1
BAD_PARAM | 0x4B0519 | create/modify_tir: indirect_table is reserved for disp_type direct
BAD_PARAM | 0x4B0518 | create/modify_tir: direct_rqn is reserved for disp_type indirect
BAD_PARAM | 0x75C809 | create_tir: invalid self_lb_block
BAD_PARAM | 0x177FBD | modify_tir: bitmask value is not legal
BAD_PARAM | 0x177FDD | modify_tir: disp_type is reserved
BAD_PARAM | 0x4C0519 | modify_tir: inline_rqn is reserved
BAD_PARAM | 0x2D1EEC | create/modify_tir: bitmask value is not legal for disp_type direct
BAD_PARAM | 0x177FDE | create/modify_tir: indirect_table is reserved
BAD_PARAM | 0x30EC1E | create/modify_tir: lro params are reserved if lro_enable_mask not set
BAD_PARAM | 0x793CE4 | create/modify_tir: lro params are reserved if lro_enable_mask not set
BAD_PARAM | 0x176FDE | modify_tir: lro params are reserved if lro bitmask not set
BAD_PARAM | 0x178FDE | modify_tir: lro params are reserved if lro bitmask not set
BAD_PARAM | 0x179FDE | modify_tir: lro params are reserved if lro bitmask not set
BAD_PARAM | 0x0479A3 | create modify tir: invalid rx_hash_fn
BAD_PARAM | 0x067146 | create modify tir: disp_type is indirect, but rx_hash_fn is none
BAD_PARAM | 0x727E5F | create modify tir: rx_hash_fn is none, but rx_hash_symmetric is not reserved
BAD_PARAM | 0x1D2602 | create modify tir: rx_hash_fn must be NONE for disp_type direct
BAD_PARAM | 0x569EE6 | create modify tir: rx_hash_fn is not toeplitz, but rx_hash_toeplitz_key is not reserved
BAD_PARAM | 0x3C59ED | create modify tir: rx_hash_fn is none, but outer hash selectors aren't reserved
BAD_PARAM | 0x1C914B | create modify tir: rx_hash_fn is none, but inner hash selectors aren't reserved
BAD_PARAM | 0x562B00 | create modify tir: rx_hash_field_selector_inner is valid only when tunneled_offload_en is set
BAD_PARAM | 0x001139 | create modify tir: inner/outer hash selectors are mutual exclusive
BAD_PARAM | 0x76D4CC | create modify tir: invalid outer hash field selector
BAD_PARAM | 0x21D95B | create modify tir: invalid inner hash field selector
BAD_PARAM | 0x4F161A | create modify tir: rx_hash modify_bitmask isn't set, but rx_hash_symmetric is not reserved
BAD_PARAM | 0x514708 | create modify tir: rx_hash modify_bitmask isn't set, but rx_hash_fn is not reserved
BAD_OUTPUT_LEN | 0x51552B | query_nic_vport_context: bad output length
BAD_OUTPUT_LEN | 0x3B7FBF | query_nic_vport_context: bad input length
BAD_OP | 0x2F4BF1 | query_nic_vport_context: command is valid only for ethernet port
BAD_PARAM | 0x2B196F | query_nic_vport_context: op_mod is reserved
BAD_OUTPUT_LEN | 0x554267 | modify_nic_vport_context: bad output length
BAD_OUTPUT_LEN | 0x2E83D3 | modify_nic_vport_context: bad input length
BAD_OP | 0x4E4CE0 | modify_nic_vport_context: command is valid only for ethernet port
BAD_PARAM | 0x3F26DC | modify_nic_vport_context: op_mod is reserved
BAD_PARAM | 0x19320A | modify_nic_vport_context: only vport is allowed to modify address_list
BAD_PARAM | 0x19320B | modify_nic_vport_context: only vport is allowed to modify roce
BAD_PARAM | 0x19320C | modify_nic_vport_context: only vport is allowed to modify ptomisc
BAD_PARAM | 0x78091C | modify_nic_vport_context: vport can't change his own permanent mac address
BAD_PARAM | 0x5EE994 | modify_nic_vport_context: insufficient privileges
BAD_PARAM | 0x19356A | modify_nic_vport_context: only vport group manager is allowed to modify chage events
BAD_PARAM | 0x24356A | modify_nic_vport_context: only vport group manager is allowed to modify min wqe inline mode
BAD_PARAM | 0x64856B | modify_nic_vport_context: vport group manager can not modify its own min_wqe_inline_mode
BAD_INPUT_LEN | 0x33FFA3 | query_esw_vport_context: bad input len
BAD_OUTPUT_LEN | 0x23DF67 | query_esw_vport_context: bad output len
BAD_OP | 0x116BCC | query_esw_vport_context: op_mod is reserved
BAD_OP | 0x4EAFE7 | query_esw_vport_context: command is valid only for ethernet port
BAD_INPUT_LEN | 0x2BDAA3 | modify_esw_vport_context: bad input len
BAD_OUTPUT_LEN | 0x23D456 | modify_esw_vport_context: bad output len
BAD_OP | 0x266AAB | modify_esw_vport_context: op_mod is reserved
BAD_OP | 0x433CE0 | modify_esw_vport_context: command is valid only for ethernet port
BAD_PARAM | 0x326B6C | modify_esw_vport_context: svlan_insert is set but svlan_insert_field_select is off
BAD_PARAM | 0x735020 | modify_esw_vport_context: svlan_insert is off but svlan fields are not reserved
BAD_PARAM | 0x2D76B3 | modify_esw_vport_context: cvlan_insert is set but cvlan_insert_field_select is off
BAD_PARAM | 0x32C8AB | modify_esw_vport_context: cvlan_insert is off but cvlan fields are not reserved
BAD_INPUT_LEN | 0x44BC7C | set_roce_address: bad input len
BAD_OUTPUT_LEN | 0x7FDB57 | set_roce_address: bad output len
BAD_OP | 0x427418 | set_roce_address: command is valid only for ethernet port
BAD_OP | 0x427419 | set_roce_address: op_mod is reserved
BAD_PARAM | 0x26D532 | set_roce_address: vlan id is reserved when vlan_valid=0
BAD_PARAM | 0x729BBB | set_roce_address: invalid roce_l3_type type
BAD_PARAM | 0x12822D | set_roce_address: invalid roce_version
BAD_PARAM | 0x79DF98 | set_roce_address: for roce_version=0, roce_l3_type is reserved
BAD_INDEX | 0x063C65 | set_roce_address: roce_address_index not valid
BAD_PARAM | 0x063C66 | set_roce_address: multicast source_mac is not allowed
BAD_PARAM | 0x493CC9 | vport commands: bad port_number. vport number is too high
BAD_PARAM | 0x63993F | query_vport_state: query uplink state - vport_number/other_vport is reserved
BAD_PARAM | 0x311733 | vport commands: not privileged
BAD_PARAM | 0x457F0C | vport commands:: not privileged
BAD_PARAM | 0x36A82E | flow_table: esw fdb configuration is valid only for vport_group_manager
BAD_PARAM | 0x4DAD27 | flow_table: unsupported table_type
BAD_PARAM | 0x2AC754 | flow_table: currently Flow Table does not supports IB port
BAD_PARAM | 0x7684D8 | flow_table: other_vport is valid only for ACL flow tables
BAD_OP | 0x525850 | create_flow_table: op_mod is reserved
BAD_PARAM | 0x5F1732 | create_flow_table: table log_size > FT_LOG_MAX_SIZE
BAD_PARAM | 0x5578D3 | create_flow_table: table level > FT_MAX_LEVEL
BAD_INPUT_LEN | 0x67847C | create_flow_group: bad input len
BAD_OUTPUT_LEN | 0x527B57 | create_flow_group: bad output len
BAD_OP | 0x0E5810 | create_flow_group: op_mod is reserved
BAD_PARAM | 0x1D1B31 | create_flow_group: start_flow_index is bigger than end_flow_index
BAD_PARAM | 0x4065F0 | create_flow_group: end_flow_index >= FT_MAX_SIZE
BAD_INPUT_LEN | 0x2BDEBE | set_flow_table_entry: bad input len
BAD_OUTPUT_LEN | 0x11FF56 | set_flow_table_entry: bad output len
BAD_OP | 0x5342CD | set_flow_table_entry: op_mod is reserved
BAD_PARAM | 0x5FAB40 | set_flow_table_entry: invalid flow_index
BAD_PARAM | 0xFDBD26 | set_flow_table_entry: flow_tag not supported for this flow table type
BAD_PARAM | 0x603D26 | set_flow_table_entry: rule already exist
BAD_PARAM | 0x144B7A | set_flow_table_entry: flow table entry must has exactly one action set
BAD_PARAM | 0x214DE0 | set_flow_table_entry: destination_list_size is valid iff fwd action is set
BAD_PARAM | 0x3E29DE | set_flow_table_entry: destination_list_size greater than max supported
BAD_OP | 0x3EB7E7 | delete_flow_table_entry: op_mod is reserved
BAD_PARAM | 0x5FAB41 | delete_flow_table_entry: invalid flow_index
BAD_PARAM | 0x4EFC3D | delete_flow_table_entry: rule doesn't exist
BAD_INPUT_LEN | 0x1D1437 | query_flow_table_entry: bad input len
BAD_OUTPUT_LEN | 0x611D98 | query_flow_table_entry: bad output len
BAD_OP | 0x0AB1E9 | query_flow_table_entry: op_mod is reserved
BAD_PARAM | 0x5FAB42 | query_flow_table_entry: invalid flow_index
BAD_PARAM | 0x63213B | query_flow_table_entry: rule doesn't exist
BAD_PARAM | 0x706441 | l2_table_entry: l2 table configuration is valid only for vport_group_manager
BAD_PARAM | 0x471805 | l2_table_entry: l2 table commands are not supported for port type ib
BAD_PARAM | 0x03A55E | l2_table_entry: table_index > MAX_L2_TABLE_SIZE
BAD_PARAM | 0x0E701A | add_vxlan_udp_dport: only PFs are allowed to modify the vxlan dport
BAD_PARAM | 0x03E78D | add_vxlan_udp_dport: vxlan commands are not supported for port type ib
BAD_INPUT_LEN | 0x6C8FBB | add_vxlan_udp_dport: bad input len
BAD_OUTPUT_LEN | 0x6D7E67 | add_vxlan_udp_dport: bad output len
BAD_OP | 0x62F4C9 | add_vxlan_udp_dport: op_mod is reserved
BAD_PARAM | 0x79D920 | delete_vxlan_udp_dport: only PFs are allowed to modify the vxlan dport
BAD_PARAM | 0x091DB1 | delete_vxlan_udp_dport: vxlan commands are not supported for port type ib
BAD_INPUT_LEN | 0x5BBF13 | delete_vxlan_udp_dport: bad input len
BAD_OUTPUT_LEN | 0x66B6FC | delete_vxlan_udp_dport: bad output len
BAD_OP | 0x0641AF | delete_vxlan_udp_dport: op_mod is reserved
BAD_PARAM | 0x249AD6 | check_modify_cong_params_ecn_rp: dec_fac should be in 0-100 range
BAD_PARAM | 0x7076FC | check_modify_cong_params_qcn_rp: dec_fac should be in 0-100 range
BAD_INPUT_LEN | 0x5BEEFD | check_modify_cong_params:bad input len
BAD_OUTPUT_LEN | 0x70CE1A | check_modify_cong_params:bad output len
BAD_PARAM | 0x58C4C9 | check_modify_cong_params:cong_protocol unsupprted protocol
BAD_INPUT_LEN | 0x5B6843 | check_query_cong_params:bad input len
BAD_OUTPUT_LEN | 0x0D468B | check_query_cong_params:bad output len
BAD_PARAM | 0x325A82 | check_query_cong_params:cong_protocol unsupprted protocol
BAD_INPUT_LEN | 0x5A48F1 | check_modify_cong_status:bad input len
BAD_OUTPUT_LEN | 0x41F0EA | check_modify_cong_status:bad output len
BAD_PARAM | 0x38252F | check_modify_cong_status:cong_protocol unsupprted protocol
BAD_PARAM | 0x27A3FB | check_modify_cong_status:tag enable is only valid for QCN
BAD_INPUT_LEN | 0x2498E2 | check_query_cong_status:bad input len
BAD_OUTPUT_LEN | 0x245260 | check_query_cong_status:bad output len
BAD_PARAM | 0x507EE9 | check_query_cong_status:cong_protocol unsupprted protocol
BAD_SYS_STATE | 0x2207A9 | enable_hca: HCA already enabled
BAD_SYS_STATE | 0x075C88 | enable_hca: function_id already enabled
BAD_SYS_STATE | 0x034D7C | disable_hca: error, teardown_hca required before disable_hca
BAD_PARAM | 0x239208 | bad PAS - reserved not zero
BAD_OP | 0x3590F5 | bad opcode, or opcode not supported in this device
BAD_RES_STATE | 0x30F433 | destroy_eq: eqn in use or doesn't exist
EXCEED_LIM | 0x7957C3 | create_eq: fail to allocate eqn
EXCEED_LIM | 0x54B156 | create_eq: fail to allocate/map mtt index
BAD_RES_STATE | 0x1870AD | destroy cq: cqn in use or doesn't exist
EXCEED_LIM | 0x0E0E82 | create_cq: fail to allocate cqn
BAD_RESOURCE | 0x0C43F4 | create_cq: eqn doesn't exist
EXCEED_LIM | 0x62BBC6 | create_cq: fail to allocate mtt index
BAD_OP | 0x7A5594 | bad opcode
EXCEED_LIM | 0x777543 | resize cq: failed to allocate MTT number
EXCEED_LIM | 0x0366A2 | modify_cq: CQ in already in error, can not resize CQ
BAD_SYS_STATE | 0x711B8C | resize_cq: failed to read CQ consumer index
BAD_SIZE | 0x1900B2 | resize_cq: current number of outstanding CQEs greater than new CQ size, or no space for magic CQE in old CQ
BAD_RESOURCE | 0x67239E | create_cq: eqn doesn't exist
BAD_RESOURCE | 0x7AEF6C | config int moderation - failed to access msix
EXCEED_LIM | 0x587239 | alloc_q_counter: failed to allocate q_counter resource number
BAD_RES_STATE | 0x1235F1 | dealloc_q_counter: q_counter doesn't exist
BAD_OUTPUT_LEN | 0x723EAD | query_q_counter: bad output length
EXCEED_LIM | 0x587439 | alloc_pd: failed to allocate pd resource number
BAD_RESOURCE | 0x3AB806 | dealloc_pd: bad op_mod
BAD_RESOURCE | 0x593117 | dealloc_pd: attempt to access reserved pd
BAD_RES_STATE | 0x31B635 | dealloc_pd: pd number in use or doesn't exist
EXCEED_LIM | 0x587939 | alloc_xrcd: failed to allocate xrcd resource number
BAD_RESOURCE | 0x59D214 | dealloc_xrcd: bad op_mod
BAD_RES_STATE | 0x391F01 | dealloc_xrc_domain: xrcd number in use or doesn't exist
EXCEED_LIM | 0x5A7939 | alloc_uar: failed to allocate uar resource number
BAD_RESOURCE | 0x6273DA | dealloc_xrcd: bad op_mod
BAD_RESOURCE | 0x1AC5B8 | dealloc_uar: attempt to access reserved uar index
BAD_RES_STATE | 0x4B4EDB | dealloc_uar: uar number in use or doesn't exist
BAD_RESOURCE | 0x775607 | destroy_mkey: attempt to access reserved mkey_ix
BAD_PARAM | 0x76093F | destroy_mkey: bad op_mod
BAD_RES_STATE | 0x77502E | destroy_mkey: mkey index in use or doesn't exist
EXCEED_LIM | 0x3B1885 | create_mkey: fail to allocate mkey index
EXCEED_LIM | 0x59C8A4 | create mkey: fail to allocate mtt/klm index
EXCEED_LIM | 0x6D50E5 | create mkey: fail to allocate bsf index
EXCEED_LIM | 0x22F901 | create_psv: fail to allocate psv index
BAD_RES_STATE | 0x4A3FD3 | generate_eqe: eq buffer is full.
BAD_PARAM | 0x4F8BB9 | destroy_srq: bad opcode modifier
BAD_RESOURCE | 0x70D476 | destroy_srq: attempt to access reserved srqn
BAD_RES_STATE | 0x7F252E | destroy srq: srqn in use or doesn't exist
BAD_PARAM | 0x4F8B89 | destroy_rmp: bad opcode modifier
BAD_RESOURCE | 0x80D476 | destroy_rmp: attempt to access reserved srqn
BAD_RES_STATE | 0x7F252F | destroy rmp: rmp in use or doesn't exist
BAD_RESOURCE | 0x5E9E82 | create_srq: cqn doesn't exist
BAD_INPUT_LEN | 0x3291EE | create srq: bad input length
EXCEED_LIM | 0x3F947D | create_srq: fail to allocate/map mtt index
EXCEED_LIM | 0x4291E8 | create_rmp: fail to allocate rmp number
BAD_PARAM | 0x892E1C | create_srq: rmp mailbox was illegally modified during proccess
EXCEED_LIM | 0x3291E8 | create_srq: fail to allocate srq number
BAD_PARAM | 0x792E1C | create_srq: input mailbox was illegally modified during proccess
BAD_PARAM | 0x1038B8 | create_srq: input mailbox was illegally modified during proccess
BAD_PARAM | 0x3A3846 | manage/query_pages, enable/disable_hca: function_id exceedes number of VFs
BAD_PARAM | 0x6BA1F4 | manage/query_pages, enable/disable_hca: function_id != 0, VF cannot manage pages for other VFs.
BAD_OUTPUT_LEN | 0x24D543 | query_pages: bad output length
BAD_PARAM | 0x27D71D | manage pages: (add) pages are not required
BAD_INPUT_LEN | 0x14AD24 | manage pages: bad input length
BAD_PARAM | 0x659C0E | manage pages: more pages than required
BAD_OUTPUT_LEN | 0x285C19 | manage pages: (return) bad output length
BAD_SYS_STATE | 0x4E2106 | manage pages: failed to read io or write host mem
BAD_SYS_STATE | 0x0E8912 | manage pages: failed read from host mem
BAD_SYS_STATE | 0x7731B2 | manage pages: failed write to mailbox
BAD_INPUT_LEN | 0x0AA602 | mad_ifc: bad input length
BAD_OUTPUT_LEN | 0x021907 | mad_ifc: bad output length
BAD_PARAM | 0x71D624 | mad_ifc: opcode modifier > 3
BAD_PARAM | 0x220275 | mad_ifc: is not supported.
BAD_PARAM | 0x7424DA | mad_ifc: invalid port number
BAD_PKT | 0x62FA16 | mad_ifc: bad packet without detailed syndrome.
BAD_PKT | 0x5BE4CF | mad_ifc: bad packet - long process
BAD_PARAM | 0x5282CF | set_hca_cap: bad params (reserved not zero)
BAD_PARAM | 0x5ADD95 | Query hca_cap: bad op_mod
BAD_OUTPUT_LEN | 0x38FF78 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF77 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF76 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF75 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF73 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF72 | query_hca_cap: bad output length
BAD_PARAM | 0x068B46 | query_hca_cap: e-switch capabilities allowed only for vport_group_manager
BAD_OUTPUT_LEN | 0x38FF79 | query_hca_cap: bad output length
BAD_PARAM | 0x2895B0 | query_hca_cap: e-switch capabilities allowed only for vport_group_manager
BAD_OUTPUT_LEN | 0x38FF74 | query_hca_cap: bad output length
BAD_PARAM | 0x5ADD96 | Query hca_cap: bad op_mod
BAD_OUTPUT_LEN | 0x726C77 | Query adapter: bad output length
BAD_PARAM | 0x471AEF | Query adapter: bad op_mod
BAD_PARAM | 0x1E5585 | reg_access_ports_perf_counters: bad params
BAD_PARAM | 0x450452 | access_register port capabilities: write option is not supported
BAD_PARAM | 0x01D849 | access_register port capabilities: write option is not supported
BAD_PARAM | 0x136488 | set_wol_rol: opcode mod must be zero
BAD_OP | 0x745959 | set_wol_rol: command is allowed only for function per port mode
BAD_OP | 0x1A4F91 | set_wol_rol: command is allowed for physical function only
BAD_OP | 0x157659 | set_wol_rol: eth only command
BAD_OP | 0x376559 | set_wol_rol: device don't support wol on the selected function
BAD_OP | 0x261053 | query_wol_rol: command is allowed only in function per port mode
BAD_OP | 0x257659 | query_wol_rol: eth only command
BAD_OP | 0x497181 | query_wol_rol: command is allowed for physical function only
BAD_PARAM | 0x033EEF | access_register pvlc: write operation not supported
BAD_PARAM | 0x792FB4 | reg_access_pvlc: invalid local port.
BAD_PARAM | 0x15C356 | access_register port capabilities: write option is not supported
BAD_PARAM | 0x2C6A90 | flow control, PFCC wrong port number
BAD_PARAM | 0x16DBB4 | flow control, PFCC port number is not valid
BAD_PARAM | 0x1476BD | Flow control, PFCC, pfc mask not supported (pfctx or pfcrx) when pprx_v or pptx_v are set.
BAD_RES_STATE | 0x361418 | query_event_map: cannot write context to output.
BAD_SYS_STATE | 0x7ADFBF | get_dropped_packet_log: packet not captured yet.
BAD_PARAM | 0x5A6AAEF| modify_rmp: Limit water mark is higher then rq/srq size.
BAD_PARAM | 0x5A6FEF | arm_rq: Limit water mark is higher then rq/srq size.
BAD_RES_STATE | 0x5DE017 | arm_dct_for_key_violation: context is not a DCT
BAD_RES_STATE | 0x44E23B | arm_dct_for_key_violation: event type not mapped
BAD_RESOURCE | 0x28762F | set_burst burst size cannot be changed by VF
BAD_PARAM | 0x064868 | set_burst_size: bad burst_size (0)
BAD_PARAM | 0x3A23EE | set_burst_size: bad burst_size
BAD_PARAM | 0x3621BF | query_hca_vport_context: invalid local_port
BAD_PARAM | 0x78312E | query_hca_vport_context: opcode mod must be zero
BAD_OP | 0x482341 | query_hca_vport_context: ib only command
BAD_OUTPUT_LEN | 0x64FF1A | modify_hca_vport_context bad: output length
BAD_OUTPUT_LEN | 0x4E3D11 | modify_hca_vport_context bad: input length
BAD_PARAM | 0x244467 | modify_hca_vport_context: invalid local_port
BAD_PARAM | 0x145288 | modify_hca_vport_context: opcode mod must be zero
BAD_OP | 0x65D9A7 | modify_hca_vport_context: ib only command
BAD_PARAM | 0x58E6C1 | modify_hca_vport_context: field_select contains read only field.
BAD_SYS_STATE | 0x4CBF2E | modify_hca_vport_context: modify other vports allowed just after pf finish init_hca.
BAD_PARAM | 0x0A0003 | modify_hca_vport_context: port guid cannot be zero.
BAD_PARAM | 0x0A0004 | modify_hca_vport_context: Bad port guid (1) see SPEC: 4.1.1 GID USAGE AND PROPERTIES
BAD_PARAM | 0x437CB5 | modify_hca_vport_context: node guid cannot be zero.
BAD_PARAM | 0x154537 | modify_hca_vport_context: bad vport_state_policy
BAD_PARAM | 0x4EE45E | modify_hca_vport_context: bad cap_mask1_field_select trying to modify RO field.
BAD_PARAM | 0x1717E4 | modify_hca_vport_context: bad cap_mask2_field_select trying to modify RO field.
BAD_PARAM | 0x0E40B0 | query_hca_vport_gid: invalid local_port
BAD_PARAM | 0x4DF8F2 | query_hca_vport_gid: opcode mod must be zero
BAD_OP | 0x158999 | query_hca_vport_gid: ib only command
BAD_OUTPUT_LEN | 0x228592 | query_hca_vport_gid: bad output length gid_index = 0xffff
BAD_PARAM | 0x0FA1F5 | query_hca_vport_gid: cannot read gid_index != 0 before function performed init_hca
BAD_PARAM | 0x3DC148 | query_hca_vport_gid: bad gid_index. Index larger than hca param guid cap
BAD_OUTPUT_LEN | 0x20DE7B | query_hca_vport_gid: bad output length
BAD_PARAM | 0x54E60A | query_hca_vport_pkey: invalid local_port
BAD_PARAM | 0x40FF30 | query_hca_vport_pkey: opcode mod must be zero
BAD_PARAM | 0x0F71B2 | query_hca_vport_pkey: bad pkey_index larger than hca param guid cap
BAD_OUTPUT_LEN | 0x6705A2 | query_hca_vport_pkey: bad output length
BAD_SYS_STATE | 0x368B01 | query_vport_counter: vport is not enabled (INIT_HCA is required)
BAD_PARAM | 0x0C9387 | query_hca_vport_pkey: invalid local_port
NO_RESOURCES | 0x2AAC7C | there will be no more pages
EXCEED_LIM | 0x23A840 | create_tir: fail to allocate tir number
EXCEED_LIM | 0x291839 | create_tir: fail to allocate tir steering entry
BAD_RESOURCE | 0x2EB6A4 | create/modify_tir: rqt doesn't exist
BAD_RESOURCE | 0x2EB6A5 | create/modify_tir: rq doesn't exist
BAD_RESOURCE | 0x25394B | create_tir: transport_domain doesn't exist
EXCEED_LIM | 0x0E350F | create_tir: fail to allocate tir lb_domain hash buckets
EXCEED_LIM | 0x3C51E8 | create_tir: fail to allocate tir lb_domain steering entry
EXCEED_LIM | 0x13C6BA | create_tir: fail to allocate tir lb_domain steering entries according to transport_domain
BAD_PARAM | 0x77C800 | modify_tir: invalid tir number
BAD_PARAM | 0x1CB6A4 | modify_tir: rqt doesn't exist
BAD_RES_STATE | 0x29E5B3 | destroy_tir: tirn in use or doesn't exist
EXCEED_LIM | 0x69517D | create_tis: fail to allocate tis number
BAD_RESOURCE | 0x3A7839 | create_tis: transport_domain doesn't exist
BAD_PARAM | 0x374C62 | modify_tis: modify_tis is not supported yet
BAD_RES_STATE | 0x6CB988 | destroy_tis: tisn in use or doesn't exist
BAD_PARAM | 0x2F99BB | query_nic_vport_state: bad allowed_list_type
BAD_PARAM | 0x4B24FC | modify_nic_vport_state: RoCE can be disabled only after all RoCE QPs are destroyed
BAD_PARAM | 0x40EA03 | modify_nic_vport_context: min_wqe_inline_mode can be modified only before vport startup
BAD_PARAM | 0x36098E | modify_nic_vport_context: inline mode for any vport must be >= inline mode of e-sw vport group manager
BAD_PARAM | 0x6A2CAA | modify_nic_vport_state: bad allowed_list_type
BAD_PARAM | 0x019C02 | modify_nic_vport_state: bad allowed_list_size
BAD_OP | 0x427417 | query_roce_address: command is valid only for ethernet port
BAD_INDEX | 0x441CA6 | query_roce_address: roce_address_index not valid
EXCEED_LIM | 0x4BF0E8 | create_flow_table: failed to allocate flow_table resource number
EXCEED_LIM | 0x7B8877 | create_flow_table: failed to allocate RX HW flow_table context
EXCEED_LIM | 0x7B8878 | create_flow_table: failed to allocate SX HW flow_table context
BAD_RES_STATE | 0x21F03E | destroy_flow_group: flow_group in use or doesn't exist
EXCEED_LIM | 0x4E9008 | create_flow_group: failed to allocate flow_group resource number
EXCEED_LIM | 0x3243F3 | create_flow_group: failed to allocate flow_group rx hw resource
EXCEED_LIM | 0x3243F4 | create_flow_group: failed to allocate flow_group sx hw resource
EXCEED_LIM | 0x629511 | create_flow_group: failed to allocate flow_group fw resource
BAD_RES_STATE | 0x21F03B | destroy_flow_group: flow_group doesn't exist
BAD_PARAM | 0x342AAE | delete_l2_table_entry: l2 table entry does not exist
BAD_PARAM | 0x244C6D | set_l2_table_entry: l2 table entry already exist
EXCEED_LIM | 0x552D36 | set_l2_table_entry: failed to allocate l2_table_entry resource number
EXCEED_LIM | 0x10B986 | set_l2_table_entry: failed to allocate RX HW l2_table context
EXCEED_LIM | 0x17AACB | set_l2_table_entry: failed to allocate SX HW l2_table context
BAD_PARAM | 0x669002 | query_l2_table_entry: l2 table entry does not exist
BAD_PARAM | 0x2031B1 | modify_vport_state: NIC_VPORT - bad vport state.
BAD_PARAM | 0x2936C3 | modify_vport_state: NIC_VPORT - bad vport_number
BAD_PARAM | 0x75CB3D | modify_vport_state: ESW_VPORT - bad vport state.
BAD_PARAM | 0x2936C2 | modify_vport_state: UP_LINK - bad vport_number
BAD_PARAM | 0x16CE03 | modify_vport_state: UP_LINK - bad vport state
BAD_PARAM | 0x83B703 | modify_vport_state: bad op_mod
BAD_OP | 0x379DB1 | query_vport_state: command is valid only for ethernet port
BAD_PARAM | 0x1B70BB | query_vport_state: bad op mod
BAD_PARAM | 0x519657 | create/modify_rqt: rqn doesn't exist or rqs have not uniform type
EXCEED_LIM | 0x5DAF94 | create_rqt: fail to allocate fw_rqt_data number
EXCEED_LIM | 0x1C4BBA | create_rqt: fail to allocate fw rqt data number
EXCEED_LIM | 0x25E793 | create_rqt: fail to allocate rqt HW DATA ctx number
BAD_RESOURCE | 0x638B5F | create_rqt: rqtn is not valid
EXCEED_LIM | 0x1C4BBB | create_rqt: fail to allocate fw rqt data number
BAD_RES_STATE | 0x0BC68E | destroy_rqt: rqt in use or doesn't exist
BAD_RES_STATE | 0x2E49BD | query_rqt: rqt in use or doesn't exist
EXCEED_LIM | 0x5D5F94 | create_rq: failed to allocate resource number
EXCEED_LIM | 0x5A7935 | create_rq: failed to allocate qp resource number
BAD_PARAM | 0x2BF8B6 | create_rq: input_mailbox was illegally modified during process
BAD_RESOURCE | 0x2BF8A6 | create_rq: cqn doesn't exist
BAD_INPUT_LEN | 0x2F50CB | create_rq: not enough pas supplied to support buffer size
EXCEED_LIM | 0x76E357 | create_rq: failed to allocate mtt
BAD_PARAM | 0x5C129A | modify_rq: Limit water mark is higher then rq/srq size.
BAD_PARAM | 0x4A5E49 | modify_rq: Limit water mark is higher then rq/srq size.
EXCEED_LIM | 0x57CF9D | create_sq: failed to allocate resource_number number
BAD_RESOURCE | 0x4FDE71 | create_sq: s_cqn doesn't exist
BAD_RESOURCE | 0x65B501 | create_sq: maximum number of supported qps exceeded
BAD_RESOURCE | 0x2AE300 | create_sq command: tis number doesn't exist or exceed limit
BAD_INPUT_LEN | 0x2F40CA | create_sq: not enough pas supplied to support buffer size
EXCEED_LIM | 0x6CC43E | create_sq: failed to allocate mtt
BAD_RES_STATE | 0x52B76F | destroy_sq: sqn is not valid or in use
BAD_RES_STATE | 0x50B76F | destroy_rq: rqn is not valid or in use
EXCEED_LIM | 0x2B1A55 | add_vxlan_udp_dport: no free vxlan_udp_port field
BAD_PARAM | 0x74D092 | delete_vxlan_udp_dport: vxlan_udp_port doesn't exist
BAD_OP | 0x08552F | alloc_transport_domain: bad op_mod
BAD_PARAM | 0x6CEF2E | alloc_transport_domain: transport_domain commands are not supported for port type ib
EXCEED_LIM | 0x095C93 | alloc_transport_domain: failed to allocate transport_domain resource number
BAD_OP | 0x76358C | dealloc_transport_domain: bad op_mod
BAD_RES_STATE | 0x50E692 | dealloc_transport_domain: transport_domain number in use or doesn't exist
INTERNAL_ERR | 0x1CD2D5 | modify_cong_status: cannot read context from input.
INTERNAL_ERR | 0x56BD42 | query_cong_params:cannot write context to output.
INTERNAL_ERR | 0x55B1FD | query_cong_params:cannot write context to output.
INTERNAL_ERR | 0x3C506F | query_cong_counter:cannot write context to output.
BAD_PARAM | 0x68C713 | destroy_qp/dct: bad opcode modifier
EXCEED_LIM | 0x19C6D6 | create_qp: failed to allocate resource_number number
BAD_RESOURCE | 0x2BF8A5 | create_qp: r_cqn doesn't exist
BAD_RESOURCE | 0x4FDF71 | create_qp: s_cqn doesn't exist
BAD_RESOURCE | 0x4A5F02 | qp command: srq number doesn't exist
BAD_RESOURCE | 0x65B500 | qp command: maximum number of supported qps exceeded
BAD_INPUT_LEN | 0x2F50CA | create qp: not enough pas supplied to support buffer size
EXCEED_LIM | 0x0BB3C2 | create_qp: failed to allocate mtt
EXCEED_LIM | 0x42A324 | create_dct: fail to allocate dct number
BAD_RESOURCE | 0x4CAF16 | create_dct: cq number doesn't exist
BAD_RESOURCE | 0x3B2998 | create_dct: srq number doesn't exist
BAD_PARAM | 0x41E870 | create_dct: dct.pd doesn't match srq.pd
BAD_PARAM | 0x2B6D28 | create_dct: dct.rlky doesn't match srq.rlky
BAD_INPUT_LEN | 0x25AC2E | init2init_qp: bad input length
BAD_PARAM | 0x4BCF21 | init2init_qp: bad opcode modifier
BAD_PARAM | 0x795921 | init2init_qp: opt_param_mask != 0
BAD_RES_STATE | 0x4287C3 | init2init_qp: invalid qp number.
BAD_QP_STATE | 0x0C7C8B | init2init_qp: qp is not in init state
BAD_INPUT_LEN | 0x7E7621 | init2rtr_qp: bad input length
BAD_PARAM | 0x0A88A8 | init2rtr_qp: bad opcode modifier
BAD_PARAM | 0x7016B9 | init2rtr_qp: bad opt_param_mask
BAD_RES_STATE | 0x5F34F6 | init2rtr_qp: invalid qp number.
BAD_QP_STATE | 0x5D668C | init2rtr_qp: qp is not in init state
BAD_RESOURCE | 0x31A762 | special_qp: cannot attach special QP, already attached
BAD_INPUT_LEN | 0x619154 | rtr2rts_qp: bad input length
BAD_PARAM | 0x6CBD32 | rtr2rts_qp: bad opcode modifier
BAD_PARAM | 0x07EC2C | rtr2rts_qp: bad opt_param_mask
BAD_RES_STATE | 0x4796B7 | rtr2rts_qp: invalid qp number.
BAD_QP_STATE | 0x429D76 | rtr2rts_qp: qp is not in rtr state
BAD_INPUT_LEN | 0x330661 | rts2rts_qp: bad input length
BAD_PARAM | 0x380F88 | rts2rts_qp: bad opcode modifier
BAD_PARAM | 0x498C8B | rts2rts_qp: bad opt_param_mask
BAD_PARAM | 0x1B5A69 | rts2rts_qp: change srqn is not supported in ISSI > 0.
BAD_PARAM | 0x1BCDE4 | rts2rts_qp: attempting to change eth_prio in ib port
BAD_RES_STATE | 0x56C36B | rts2rts_qp: invalid qp number.
BAD_QP_STATE | 0x0FC39F | rts2rts: qp is not in RTS state.
BAD_RESOURCE | 0x2BF8A4 | rts2rts: r_cqn doesn't exist
BAD_RESOURCE | 0x7C839F | rts2rts_qp: srq number doesn't exist
BAD_PARAM | 0x3F7B1C | 2error_qp/2reset/drain_dct: bad opcode modifier
BAD_RES_STATE | 0x7EA02D | 2error_qp/2reset/drain_dct: invalid qp/dct number.
BAD_INPUT_LEN | 0x42ED7C | sqerr2rts_qp/sqd2rts_qp: bad input length
BAD_PARAM | 0x1E674D | sqerr2rts_qp/sqd2rts_qp: bad opcode modifier
BAD_PARAM | 0x566AD3 | sqerr2rts_qp: bad opt_param_mask
BAD_PARAM | 0x0E5F93 | sqd2rts_qp: bad opt_param_mask
BAD_RES_STATE | 0x29653C | sqerr2rts_qp/sqd2rts_qp: invalid qp number.
BAD_QP_STATE | 0x0E3608 | sqerr2rts_qp: qp is not in sqerr state
BAD_QP_STATE | 0x3DD302 | sqd2rts_qp: qp is not in sqd state
BAD_PARAM | 0x31ED04 | create_flow_table: level0 ft for this table_type is already exist
NO_RESOURCES | 0x401239 | eth global steering table alloc fail 1
NO_RESOURCES | 0x71C1EB | eth global steering table alloc fail 2
NO_RESOURCES | 0x42EBCA | eth global steering table alloc fail 3
NO_RESOURCES | 0x290D05 | eth global steering table alloc fail 4
NO_RESOURCES | 0x79C639 | eth global steering table alloc fail 5
NO_RESOURCES | 0x21435E | eth global steering table alloc fail 6
NO_RESOURCES | 0x3541E6 | eth global steering table alloc fail 7
NO_RESOURCES | 0x0AFFAE | eth global steering table alloc fail 8
NO_RESOURCES | 0x2FE7D9 | eth global steering table alloc fail 9
NO_RESOURCES | 0x2039BE | eth global steering table alloc fail 10
NO_RESOURCES | 0x53B84F | eth global steering table alloc fail 11
NO_RESOURCES | 0x23A0E6 | eth global steering table alloc fail 12
NO_RESOURCES | 0x79E69E | eth global steering table alloc fail 13
NO_RESOURCES | 0x6584C2 | eth global steering table alloc fail 14
NO_RESOURCES | 0x4CF024 | eth gvmi steering table alloc fail 1
NO_RESOURCES | 0x5CF024 | eth gvmi steering table alloc fail 2
NO_RESOURCES | 0x6CF024 | eth gvmi steering table alloc fail 3
NO_RESOURCES | 0x7368A4 | eth gvmi steering table alloc fail 4
NO_RESOURCES | 0x0AC92B | eth gvmi steering table alloc fail 5
NO_RESOURCES | 0x58900D | eth gvmi steering table alloc fail 6
NO_RESOURCES | 0x0B0CFD | eth gvmi steering table alloc fail 7
NO_RESOURCES | 0x33EA94 | eth gvmi steering table alloc fail 8
BAD_PARAM | 0x1C2B78 | ft_test_and_update: invalid table_id
BAD_PARAM | 0x66CBBB | ft_test_and_update: table_id doesn't match table_type
BAD_PARAM | 0x66CDDD | ft_test_and_update: table_id doesn't exist for this vport_num
BAD_PARAM | 0x66D6C3 | destroy_flow_table: flow table still has attached groups
BAD_PARAM | 0x389E56 | destroy_flow_table: flow table still pointed by some flows
EXCEED_LIM | 0x0A1020 | create_flow_group: groups_member_count > table_size
BAD_RESOURCE | 0x3D1541 | set_flow_table_entry: tir doesn't exist;
EXCEED_LIM | 0x5D1541 | set_flow_table_entry: tir ref_count exceed limit
BAD_PARAM | 0x6D1541 | set_flow_table_entry: tir already pointed by some flow table with different table type
BAD_PARAM | 0x3178F5 | flow_group: flow_group doesn't exist (no such group_id for this table_id)
BAD_PARAM | 0x6D0ED4 | flow_group: flow_group doesn't exist (no such group_id for this table_type)
BAD_PARAM | 0x0F4A91 | set_flow_table_entry: flow_index < group start_flow_index
BAD_PARAM | 0x1DC7A3 | set_flow_table_entry: flow_index > group end_flow_index
BAD_PARAM | 0x3AD328 | set_flow_table_entry: rule include unmatched bits (group_match_criteria == 0, but fte_match_value == 1)
BAD_PARAM | 0x66010E | create_flow_group: invalid match_criteria_enable
BAD_PARAM | 0x7E1579 | create_flow_group: outer_headers valid bit isn't set, but headers are not reseved
BAD_PARAM | 0x7E1580 | create_flow_group: outer_headers valid bit is set, but headers are zero
BAD_PARAM | 0x0D37F4 | create_flow_group: misc_parameters valid bit isn't set, but headers are not reseved
BAD_PARAM | 0x0D37F5 | create_flow_group: misc_parameters valid bit is set, but headers are zero
BAD_PARAM | 0x17FAA8 | create_flow_group: inner_headers valid bit isn't set, but headers are not reseved
BAD_PARAM | 0x17FAA9 | create_flow_group: inner_headers valid bit is set, but headers are not zero
INTERNAL_ERR | 0x0FC8F3 | create_flow_group: unexpected invalid group in list
BAD_PARAM | 0x190DBD | create_flow_group: groups overlapping
BAD_PARAM | 0x7252AD | create_flow_group: groups overlapping
BAD_PARAM | 0x4FF308 | create_flow_group: group exceed flow table size
BAD_PARAM | 0x6AE84C | set_flow_table_entry: destination table is in illegal level
BAD_PARAM | 0x6AE95D | set_flow_table_entry: dest_list_size > 1, but dest_ft_level < 64
BAD_PARAM | 0x6AEA6E | set_flow_table_entry: dest_list_size > 1, but src_ft_level >= 64
BAD_PARAM | 0x44090E | set_flow_table_entry: invalid vport number
BAD_PARAM | 0x4C4A4A | set_flow_table_entry: destination list must be comprised of destinations of the same type
BAD_PARAM | 0x22A5AF | set_flow_table_entry: dest_type == VPORT is valid only for table_type == ESW_FDB
BAD_PARAM | 0x142AD1 | set_flow_table_entry: multiple processing paths of flow tables is supported only for table_type == NIC_RX
BAD_PARAM | 0x002C63 | set_flow_table_entry: dest_type == TIR is valid only for NIC RX and sniffer flow tables
BAD_PARAM | 0x06DBB6 | set_flow_table_entry: multiple TIR destinations is not allowed
BAD_PARAM | 0x27DBA7 | set_flow_table_entry: invalid flow destination type
BAD_RES_STATE | 0x2036ED | set_flow_table_entry: flow_group doesn't exist, or exceed limit
EXCEED_LIM | 0x5369F3 | set_flow_table_entry: icm allocation failed
BAD_PARAM | 0x1CC302 | create_flow_group: DIP/SIP header is set , but ethertype isn't fully set
BAD_PARAM | 0x3F5A6F | create_flow_group: UDP and TCP headers are mutual exclusive
BAD_PARAM | 0x23A6BF | create_flow_group: source_port match is not allwoed for this table type
BAD_PARAM | 0x45A7BF | create_flow_group: source_port can not be partial matched
BAD_PARAM | 0x6013FA | set_flow_table_entry: invalid IP version ethertype
BAD_PARAM | 0x0CCF50 | PTYS: width 1X bit can't be cleared
BAD_PARAM | 0x166B61 | PTYS: Trying to set ib_proto_admin to a speed which is not supported.
BAD_PARAM | 0x103B92 | PTYS: Trying to set eth_proto_admin to a speed which is not supported.
BAD_PARAM | 0x3123FD | bad PAS - reserved not zero (just for mtts. 0xfff)
BAD_PARAM | 0x3123FE | bad PAS - reserved not zero (just for mtts. 0xfff)
BAD_RES_STATE | 0x6DA775 | manage_pages: bad hca state (enable hca is needed).
BAD_RES_STATE | 0x658908 | enable_hca: initializing
BAD_RES_STATE | 0x747414 | enable_hca: HOST0 driver must be loaded first.
BAD_RES_STATE | 0x083FCD | enable_hca: driver (hypervisor) refuesed to give pages.
BAD_RES_STATE | 0x2F4115 | enable_hca: PF event eq hasn't been set.
BAD_RES_STATE | 0x1B2028 | enable_hca: PF eq error.
BAD_RES_STATE | 0x511EFC | enable_hca: HCA already enabled.
BAD_RES_STATE | 0x54442A | disable_hca: PF event eq hasn't been mapped or fatal EQ problem
BAD_RES_STATE | 0x54667C | disable_hca: PF event eq hasn't been mapped or fatal EQ problem
BAD_RES_STATE | 0x70227F | disable hca: bad hca state.
BAD_RES_STATE | 0xA38764 | query_pages: bad op_mod, boot pages is required.
BAD_PARAM | 0x7EEC68 | query_pages: bad op_mod
BAD_OUTPUT_LEN | 0x4D99EF | query_issi: bad output length
BAD_PARAM | 0x7A7D3C | set issi: bad issi - not supported
BAD_PARAM | 0x2EDABC | set issi: bad issi - not supported
BAD_PARAM | 0x20BA9B | set issi: issi can be set just after enable hca.
BAD_RES_STATE | 0x7F88B6 | enable_hca cannot access other functions before init hca
BAD_RES_STATE | 0x7E89B1 | disable_hca cannot access other functions before init hca
BAD_RES_STATE | 0x59A763 | query_pages: hca is not enabled
BAD_PARAM | 0x5468FA | manage_pages: pages are not required
BAD_SYS_STATE | 0x2B69B6 | bad opcode (not supported before init hca)
BAD_SYS_STATE | 0x408B33 | bad opcode + hca state (HCA disabled or did not get all required pages)
NO_RESOURCES | 0x632A50 | init_hca: icm context initialization error (reserved_contexts)
NO_RESOURCES | 0x28E7D8 | init_hca: icm context initialization error (dc)
NO_RESOURCES | 0x7B7A29 | init_hca called without enough pages to complete operation
NO_RESOURCES | 0x5B3CF2 | init_hca called without enough pages to complete operation
BAD_SYS_STATE | 0x133D1B | init_hca: gvmi already initialized
BAD_RES_STATE | 0x448829 | teardown_hca: not all dcts are closed
BAD_SYS_STATE | 0x398A88 | gvmi not active
NO_RESOURCES | 0x4F8492 | global steering table alloc fail 1
NO_RESOURCES | 0x4C37AC | ib global steering table alloc fail 2
NO_RESOURCES | 0x3EFDDC | ib global steering table alloc fail 3
NO_RESOURCES | 0x6CDFC0 | ib gvmi steering table alloc fail 1
NO_RESOURCES | 0x314248 | ib gvmi steering table alloc fail 2
NO_RESOURCES | 0x498A88 | ib gvmi steering table alloc fail 3
NO_RESOURCES | 0x4BFE48 | ib gvmi steering table alloc fail 4
BAD_RES_STATE | 0x42D2BF | attach_to_mcg: qp already exists in mcg
EXCEED_LIM | 0x44D596 | attach_to_mcg: mcg already has maximum qps
BAD_RES_STATE | 0x53EC1C | detach_from_mcg: mcg doesn't exist
BAD_RES_STATE | 0x756DB1 | detach_from_mcg: mcg doesn't exist in this gvmi
BAD_RES_STATE | 0x580CF2 | detach_from_mcg: qp doesn't exist in mcg
EXCEED_LIM | 0x6466E3 | attach_detach_from_mcg: steering icm entries exhausted
INTERNAL_ERR | 0x28D3E6 | attach/detach_to_mcg: Failed to execute IPv6 MCG attach/detach
BAD_OP | 0x2FB682 | sniffer: only port_pf_gvmi can use sniffer
BAD_RES_STATE | 0x1FB682 | sniffer: attach while attached
BAD_RES_STATE | 0x7E8862 | sniffer: detach while not attached
BAD_RESOURCE | 0x15A3C9 | qp command: can not open RoCE QP if vport roce_en == 0
BAD_RES_STATE | 0x25B161 | destroy_ctx - context doesn't exist or doesn't match type
BAD_RES_STATE | 0x4A6FC9 | destroy_ctx - context in use
BAD_RES_STATE | 0x60DA55 | destroy_dct - dct not in drained state
BAD_PARAM | 0x67A6F2 | slrg doesnt support write;
BAD_PARAM | 0x0F0E35 | ppamp doesnt support write;
BAD_PARAM | 0x2B6B7C | mpein doesnt support write
BAD_PKT | 0x4A22F | access reg MAD with specified register id not supported
BAD_PKT | 0xA473A0 | MADIFC: process_smp_lid, bad privileged - silently discarded.
BAD_PKT | 0x16C592 | mad_ifc: process_smp_lid mkey check failed - silently discarded
INTERNAL_ERR | 0x079233 | set_get_port_info: silently discarded.
BAD_PKT | 0x468496 | mad_ifc: ATTRV_SM_INFO handled by SW
BAD_PKT | 0x071808 | mad_ifc: smp trap repress silently discarded after processing.
BAD_PKT | 0x071809 | mad_ifc: GET_RESP and TRAP method are silently discarded.
BAD_PKT | 0x7ECC11 | mad_ifc: process_cc cc_key check failed
BAD_PKT | 0x4EB0AE | mad_ifc: cc trap repress silently discarded after processing.
BAD_PKT | 0x3D89EB | mad_ifc: hca is not active
BAD_PARAM | 0x6E0A69 | access_register PPAD: supported only with fpp enabled
BAD_PARAM | 0x1CD13E | access_register PPAD: local port reserved when single_mac=0.
BAD_PARAM | 0x1CC031 | access_register PPAD: invalid port
BAD_PARAM | 0x04E66D | access_register PPAD: invalid port
BAD_PARAM | 0x231E68 | access register PPAMP: invalid access
BAD_PARAM | 0x3F06E8 | access_register SLRG: invalid port
BAD_PARAM | 0x4D69AC | access register SLRG: invalid access
BAD_PARAM | 0x5C2FC9 | access_register PPTT: invalid port
BAD_PARAM | 0xC2B9A3 | access register PPTT: invalid access
BAD_PARAM | 0x7C120F | access_register PPRT: invalid port
BAD_PARAM | 0x54FB4F | access register pprt: invalid access
BAD_PARAM | 0x9B3891 | access_register PPAOS: invalid port
BAD_PARAM | 0x717B3F | access register PPAOS: ppaos_query_write invalid swid
BAD_PARAM | 0xF53157 | access register PPAOS: invalid access
BAD_PARAM | 0x5F11F5 | access_register SLTP: write to PCIe
BAD_PARAM | 0x1B16B0 | access_register SLTP: invalid port
BAD_PARAM | 0x6217C2 | invalid access;
BAD_PARAM | 0x78E19B | access_register SLRP: write to PCIe
BAD_PARAM | 0x5D3B66 | access_register SLRP: invalid port
BAD_PARAM | 0x369C99 | invalid access ;
BAD_PARAM | 0x07A9BF | invalid access
BAD_PARAM | 0x091F41 | access_register PPLR: invalid port
BAD_PARAM | 0x4497BE | invalid access
BAD_PARAM | 0x7B7705 | access_register PPLM: invalid port
BAD_PARAM | 0x5AA082 | pplm bad_param;
BAD_PARAM | 0x7203E5 | access_register PAOS: invalid port
BAD_PARAM | 0x09A9FB | access register PAOS: paos_query invalid swid
BAD_PARAM | 0x7D10EF | access_register PAOS: invalid port
BAD_PARAM | 0x51BF55 | access_register PAOS: invalid admin_status;
BAD_PARAM | 0x6E2A11 | access register PAOS: paos_query invalid swid
BAD_PARAM | 0x43A7AF | access register PAOS: invalid admin status
BAD_PARAM | 0x33EDC5 | access_register PMTU: invalid port
BAD_PARAM | 0x49B0F2 | access_register PTYS: invalid port
BAD_PARAM | 0x7CD836 | PTYS: invalid protocol mask value
BAD_PARAM | 0x2FDE74 | access_register PMTU: invalid port
BAD_PARAM | 0x648AFC | PMTU: admin MTU given is greater than device's max MTU
BAD_PARAM | 0x57ACCD | PMTU: admin MTU given is not a valid IB spec MTU
BAD_PARAM | 0x71F74A | PMTU: admin MTU given is less than the min ETH mtu val
BAD_PARAM | 0x143B37 | access_register PTYS: invalid port
BAD_PARAM | 0x208984 | PTYS: invalid protocol mask value
BAD_PARAM | 0x7B9543 | access_register PVLC: invalid port
BAD_PARAM | 0x087016 | PVLC: port is not IB.
BAD_PARAM | 0x063342 | access_register SLRG: PCIe with hix too big
BAD_PARAM | 0x758D22 | access_register SLRG: PCIe bad lane
BAD_PARAM | 0x3100D8 | access_register SLTP: PCIe with hix too big
BAD_PARAM | 0x5A1428 | access_register SLTP: PCIe bad lane
BAD_PARAM | 0x3A8B75 | access_register SLRP: PCIe with hix too big
BAD_PARAM | 0x625223 | access_register SLRP: PCIe bad lane
BAD_PARAM | 0x72EA4D | access_register MPEIN: PCIe with hix too big
BAD_PARAM | 0x7A20B2 | access_register MPCNT: invalid group
BAD_PARAM | 0x41272B | access_register MPCNT: PCIe with hix too big
BAD_PARAM | 0x2D0165 | access_register MPCNT: all groups allowed with clr and set() only
BAD_PARAM | 0x123FAF | access_register MPCNT: cant clear timers and state counters.
BAD_PARAM | 0x7662FD | access_register MPCNT: unsupported group index on read.
BAD_PARAM | 0x14D016 | access_register MPCNT: unsupported group index on clear.
BAD_PARAM | 0x7ED873 | access_register MPCNT: unsupported group index on write
BAD_PARAM | 0x4B4004 | reserved fields are not zero (1st DW)
BAD_PARAM | 0x4E0B36 | reserved fields are not zero (2nd DW)
BAD_PARAM | 0x70BE33 | bad op_mod
BAD_PARAM | 0x0C6B73 | reserved fields are not zero (4th DW)
BAD_INPUT_LEN | 0x672230 | bad input length
BAD_OUTPUT_LEN | 0x7C331E | bad output length
BAD_PARAM | 0x17B535 | reserved fields are not zero 3rd DW*/
BAD_INPUT_LEN | 0x6CE368 | get_dropped_packet_log: bad input length
BAD_OUTPUT_LEN | 0x7BF634 | get_dropped_packet_log: bad output length
BAD_SYS_STATE | 0x256AF0 | TODO FPP
BAD_INPUT_LEN | 0x279651 | init_hca: bad input length
BAD_PARAM | 0x21E00A | init_hca: bad op_mod
BAD_PARAM | 0x7DD100 | reserved fields are not zero 1st DW
BAD_PARAM | 0x626483 | reserved fields are not zero 2nd DW
BAD_PARAM | 0x204BB3 | reserved fields are not zero 3rd DW
BAD_PARAM | 0x0DBB21 | reserved fields are not zero 4th DW
BAD_PARAM | 0x1B7325 | create_query_mkey: reserved fields are not zero 1st DW
BAD_PARAM | 0x0CAE4B | create_query_mkey: reserved fields are not zero 2nd DW
BAD_PARAM | 0x3F03F8 | create_query_mkey: reserved fields are not zero 3rd DW
BAD_PARAM | 0x6EE6D8 | create_query_mkey: reserved fields are not zero 4th DW
BAD_PARAM | 0x18E774 | create/modify eq/cq (resize): log_cq_size > LOG_MAX_EQCQ_SIZE
BAD_PARAM | 0x6AA71A | create/modify eq/cq (resize): bad cq size. Only 64B, 128B supported
BAD_PARAM | 0xAC4144 | create/modify eq/cq (resize): page offset must be 0
BAD_PARAM | 0x2B15A6 | create eq/cq: log_page_size cannot be bigger than 19 (2G) units 4K
BAD_INPUT_LEN | 0x9074AA | create/modify eq/cq (resize): bad input length
BAD_OUTPUT_LEN | 0x38AEDB | create/modify eq/cq (resize): bad output length
BAD_PARAM | 0x7FAB49 | create eq/cq: bad opcode modifier
BAD_PARAM | 0x4C4269 | create eq/cq: state is reserved.
BAD_PARAM | 0x4BF94B | create eq/cq: consumer_counter != 0
BAD_PARAM | 0x6F7FB3 | create eq/cq: producer_counter != 0
BAD_PARAM | 0x397E61 | create eq/cq: bad uar number
BAD_PARAM | 0x67C01E | create eq: bad msix number
BAD_PARAM | 0x571493 | create eq: intr is reserved when msix isn't enabled
BAD_PARAM | 0x008FEF | create_eq: unsupported event type
BAD_PARAM | 0x7A4F88 | create_eq: event supported for single host per port and PFs only
BAD_RESOURCE | 0x601D5F | destroy_cq: attempt to access reserved cqn
BAD_PARAM | 0x11145F | destroy_cq: bad op_mod
BAD_RESOURCE | 0x01A08D | destroy_eq: attempt to access reserved eqn
BAD_RES_STATE | 0x1D7771 | modify_cq: bad cq number - cq doesn't exist
BAD_RESOURCE | 0x55AD7A | modify_cq: attempt to access reserved cqn
BAD_RES_STATE | 0x2F1396 | modify_cq: cq is in error state and cannot be modified
BAD_INPUT_LEN | 0x2BA264 | modify_cq bad input length
BAD_INPUT_LEN | 0x244364 | resize cq bad input length
BAD_PARAM | 0x101EE5 | int_moderation: bad op_mod
BAD_RESOURCE | 0x3B024B | int_moderation: attempt to access non exsistent msi-x
BAD_INPUT_LEN | 0x4DF3DC | create mkey: bad input length
BAD_PARAM | 0x44D3A3 | create mkey: bad opcode modifier.
BAD_PARAM | 0x60D3DE | create mkey: illegal access_mode
BAD_PARAM | 0x5038AD | create mkey: bsf is not supported
BAD_PARAM | 0x2225F2 | create mkey: signature is not supported
BAD_PARAM | 0x3B1B20 | create mkey: bsf is not supported
BAD_PARAM | 0x10301E | create mkey: max bsf_octword_size supported is 256K
BAD_PARAM | 0x56DD41 | create mkey: max translations_octword_size supported is 2G (max num of mtts is 4G)
BAD_PARAM | 0x5F4568 | create mkey: octoword_actual_size bigger than translations_octword_size
BAD_PARAM | 0x3783F6 | create mkey: PA mode with translations_octword_size > 0
BAD_PARAM | 0x03BF6F | create mkey: translations_octword_size == 0 and not PA mode.
BAD_PARAM | 0x0380C1 | create mkey: NO PA mode, MR not free but no mtts was given
BAD_PARAM | 0x25A977 | create mkey: MR free and umr_en disable
BAD_PARAM | 0x772CF9 | create mkey: length is bigger than 2^64
BAD_PARAM | 0x66E7E8 | create mkey: wrong page size
BAD_PARAM | 0x10A58D | create mkey: window size exceed translations_octword_size
BAD_PARAM | 0x5B31FA | create mkey: not enough mtts in the mail box.
BAD_PARAM | 0x776E2C | create mkey: wrong page size should be reserved in KLM/PA mode
BAD_PARAM | 0x105B45 | create_mkey: pg_access is valid only for access_mode MTT
BAD_INPUT_LEN | 0x052FD5 | query_mkey: bad input length
BAD_OUTPUT_LEN | 0x24EF33 | query_mkey: bad output length
BAD_PARAM | 0x247885 | query_mkey: bad opcode modifier
BAD_PARAM | 0x68BFFD | query_mkey: bad opcode modifier
BAD_RES_STATE | 0x15B0BA | query_mkey: bad mkey index
BAD_RESOURCE | 0x6F23F2 | query_mkey: attempt to access reserved mkey
BAD_PARAM | 0x2F3DC3 | query_mkey: pg_access does not match mkey pg_access
BAD_RES_STATE | 0x23528A | query context/page_fault_resume: bad context number
BAD_RESOURCE | 0x7D55AA | query context/page_fault_resume: attempt to access reserved context number
BAD_OUTPUT_LEN | 0x3676F2 | query context/page_fault_resume: bad output length
BAD_PARAM | 0x6DB4DA | query context/page_fault_resume: bad opcode modifier
BAD_INPUT_LEN | 0x3249FD | page_fault_resume: bad input length
BAD_PARAM | 0x10CD65 | qp_page_fault_resume: bad opcode modifier
BAD_RES_STATE | 0x3D5E24 | unexpected page_fault_resume_cmd (no event sent from FW)
BAD_INPUT_LEN | 0x2FC801 | create_psv: bad input length
BAD_OUTPUT_LEN | 0x36918C | create_psv: bad output length
BAD_PARAM | 0x4F5495 | create_psv: bad opcode modifier
BAD_PARAM | 0x1F7A7F | create_psv: num of psv is 0
BAD_PARAM | 0x4CB25F | create_psv: num of psv is 3
BAD_PARAM | 0x0C1415 | create_psv: num of psv > 4
BAD_PARAM | 0x6B87EC | create_psv: reserved fields are not zero DW1
BAD_PARAM | 0x19FE3C | create_psv: reserved fields are not zero DW2
BAD_PARAM | 0x27D2DF | create_psv: reserved fields are not zero DW3
BAD_PARAM | 0x7D1C5F | create_psv: reserved fields are not zero DW4
BAD_RESOURCE | 0x179B25 | destroy_psv: attempt to access reserved psv index
BAD_PARAM | 0x4AD785 | destory_psv: opcode_mod != 0
BAD_RES_STATE | 0x4FF64E | destory_psv: psv does not exist.
BAD_INPUT_LEN | 0x5B7B17 | query_psv: bad input length
BAD_OUTPUT_LEN | 0x14AAFD | query_psv: bad output length
BAD_PARAM | 0x28A1A6 | query_psv: bad opcode modifier
BAD_RESOURCE | 0x19A866 | query_psv: attempt to access reserved psv index
BAD_RES_STATE | 0x3A1317 | query_psv: psv does not exist.
BAD_RES_STATE | 0x12E4A1 | query_eq/gen_eqe: bad eqn
BAD_RESOURCE | 0x3A12ED | query_eq/gen_eqe: attempt to access reserved eq number
BAD_OUTPUT_LEN | 0x5BA99E | query_eq: bad output length
BAD_PARAM | 0x6908EC | query_eq: bad opcode modifier
BAD_OUTPUT_LEN | 0x47E299 | query_cq: bad output length
BAD_PARAM | 0x44C59F | query_cq: bad opcode modifier
BAD_RES_STATE | 0x1FB6EC | query_cq: bad qp index
BAD_PARAM | 0x537E97 | dc_access option valid only for DC
BAD_PARAM | 0x60D2F5 | qp commands: (Q_KEY) is supported just in UNCONNECTED mode.
BAD_PARAM | 0x3670A5 | (alt_addr_path, rwe, pm_state) supported just in static connected.
BAD_PARAM | 0x4DC4E4 | (ack_timeout/rnr_retry/retry_count/log_sra_max/rae) is supported just in reliable mode.
BAD_PARAM | 0x25DF13 | (rre/min_rnr_nak/log_rra_max) is supported just in static reliable mode
BAD_PARAM | 0x58CC13 | srq number bit is reserved if rq type != srq.
BAD_PARAM | 0x3BAC66 | srq number bit is reserved in xrc mode.
BAD_PARAM | 0x3836FE | xrc qp does not need receive cq
BAD_PARAM | 0x6C4351 | qp without receive queue does not need receive cq.
BAD_PARAM | 0x65EB34 | pm_state cannot be change in special qp
BAD_PARAM | 0x76EE96 | port cannot be change in special qp
BAD_PARAM | 0x5FF312 | sl cannot be change in special qp
BAD_PARAM | 0x43104D | special qp does not have secondary_address_path
BAD_PARAM | 0x1DB648 | address_path.f_dscp is RoCE unconnected only
BAD_PARAM | 0x66375B | address_path.f_ecn is RoCE unconnected only
BAD_PARAM | 0x3025D0 | address_path.f_eup is RoCE unconnected only
BAD_PARAM | 0x2E015A | address_path.rmac_47_32 is RoCE connected only
BAD_PARAM | 0x53A33C | address_path.rmac_31_0 is RoCE connected only
BAD_PARAM | 0x7FD2B9 | address_path.udp_sport is RoCE connected only
BAD_PARAM | 0x7A4E3E | address_path.ecn is RoCE only
BAD_PARAM | 0x57527E | address_path.dscp is RoCE only
BAD_PARAM | 0x192112 | remove after utopx fix #769534
BAD_PARAM | 0x72B104 | address_path.prio is RoCE only
BAD_PARAM | 0x270173 | address_path.pkey_index is reserved for RoCE
BAD_PARAM | 0x0A3AF1 | address_path.sl is reserved for RoCE
BAD_PARAM | 0x2AFB5D | address_path.fl is IB native connected only field
BAD_PARAM | 0x584EFC | address_path.mlid is IB native_connected only field
BAD_PARAM | 0x1F3B5D | address_path.rlid is IB native connected only field
BAD_PARAM | 0x1796E4 | address_path.grh is IB native connected only field
BAD_PARAM | 0x08DE6B | address_path.src_addr_index is reserved for UD/DCI/no GRH
BAD_PARAM | 0x32E7BB | address_path.hop_limit is reserved for UD/DCI/no GRH
BAD_PARAM | 0x69216A | address_path.flow_label is reserved for UD/DCI/ no GRH
BAD_PARAM | 0x764216 | address_path.tclass is reserved for UD/DCI/ no GRH
BAD_PARAM | 0x7812D7 | address_path.rgid_rip is reserved for UD/DCI
BAD_PARAM | 0x29E0DF | address_path.udp_sport is not in the range defined by hca_cap
BAD_PARAM | 0x1FFEA3 | address_path.udp_sport is reserved for roce v1 and v1.5
BAD_PARAM | 0x1A58FB | address_path.ecn is reserved for roce v1
BAD_PARAM | 0x632491 | address_path.dscp is reserved for roce v1
BAD_PARAM | 0x3620D8 | rwe valid in static connected qp only
BAD_PARAM | 0x36C5D1 | rae valid in reliable qp only
BAD_PARAM | 0x7D9D73 | rae valid in RC/XRC qp only
BAD_PARAM | 0x5D447D | dc msg_max > dcr_msg_max
BAD_PARAM | 0x00BF9B | init2rtr: bad msg_max
BAD_PARAM | 0x2B9ADC | init2rtr: non default vport must use set grh (grh bit)
BAD_PARAM | 0x7158C4 | init2rtr: remote_qpn is valid in static connected node only
BAD_PARAM | 0x7F56A9 | next_rcv_psn field is reserved for dci/unconnected qp
BAD_PARAM | 0x390BD3 | init2rtr: min_rnr_nak field is reserved for dci/unconnected qp
BAD_PARAM | 0x382E4C | illegal pm_state
BAD_PARAM | 0x20FD05 | illegal pm_state transition. APM_STATE_MIGRATED can only be changed to APM_STATE_REARM
BAD_PARAM | 0x1AED84 | illegal pm_state transition. While in APM_STATE_REARM, only HW can modify pm_state
BAD_PARAM | 0x106230 | illegal pm_state transition. APM_STATE_ARMED can only be changed to APM_STATE_MIGRATED
BAD_PARAM | 0x2C4432 | bad mtu (==0)
BAD_PARAM | 0x434F5F | bad mtu enumeration mtu in [1..5]
BAD_PARAM | 0x15C162 | primary_path pkey_index is larger than device cap
BAD_PARAM | 0x100715 | primary_path pkey_index is reserved for RoCE
BAD_PARAM | 0x2E31D2 | alternate_path pkey_index is larger than device cap
BAD_PARAM | 0x476916 | QP1: q_key must be 0x80010000
BAD_PARAM | 0x069EFE | atomic_mode must comes with rae change
BAD_PARAM | 0x576363 | atomic_mode is reserved without rae
BAD_PARAM | 0x4CF067 | atomic_mode is greater than max supported
BAD_PARAM | 0x3DB8C9 | dc extended atomic > dcr_extended_atomic
BAD_PARAM | 0x177405 | qp commands : bad port number
BAD_PARAM | 0x5021A1 | qp commands : alternate_path - bad port number
BAD_PARAM | 0x2672B8 | dc rra_max is reserved in dci qp
BAD_PARAM | 0x6DA61B | rra_max > hca_cap.log_max_ra_res
BAD_PARAM | 0x285837 | dc log_sra_max > hca_cap.log_max_ra_req_dc
BAD_PARAM | 0x0B673F | log_sra_max > hca_cap.log_max_ra_req
BAD_RESOURCE | 0x4AF0EB | modify_qp: cannot use cq in XRC mode
BAD_INPUT_LEN | 0x12661C | create qp: bad input length
BAD_PARAM | 0x11EB32 | create_qp: bad opcode_modifier
BAD_PARAM | 0x02DCDC | create_qp: un aligned dbr_adr
BAD_PARAM | 0x28B996 | create_qp: bad service type
BAD_PARAM | 0x48B5C0 | create_qp: invalid service type for RoCE
BAD_PARAM | 0x311E80 | create_qp: bad rq_type.
BAD_PARAM | 0x7FC507 | create_qp: bad rq_type, XRC must come with rq_type srq
BAD_PARAM | 0x30CB3E | create qp: bad uar number
BAD_PARAM | 0x397FA9 | create_qp: DC is not supported in hca cap configuration.
BAD_PARAM | 0x410975 | create_qp: bad rq_type, DC must be srq
BAD_PARAM | 0x344C32 | create_qp: bad cs_req (must be 0x22/0x0)
BAD_PARAM | 0x690D51 | create_qp: fre not allowed in MLX mode
BAD_PARAM | 0x694D51 | create_qp: end_padding_mode !=0 while end_pad=0
BAD_PARAM | 0x694D52 | create_qp: end_padding_mode > 1 is not supported
BAD_PARAM | 0x6DCF3A | create_qp: bad log_rq_stride > 5.
BAD_PARAM | 0x283F1A | create_qp: bad log_rq_size and log_rq_stride
BAD_PARAM | 0x33BC5A | create_qp: log_rq_stride is reserved when rq_type != regular
BAD_PARAM | 0x41B867 | create_qp: log_rq_size is reserved when rq_type != regular
BAD_PARAM | 0x27D5A7 | create_qp: cd slave enable must come with rq_type regular.
BAD_PARAM | 0x735349 | create qp: opt_param_mask !=0
BAD_PARAM | 0x6897E7 | qpc state != 0
BAD_PARAM | 0x6DD6F3 | sw_sq_wqebb_counter - query only
BAD_PARAM | 0x55B9EB | hw_sq_wqebb_counter - query only
BAD_PARAM | 0x57D8C2 | hw_rq_counter_hw_rcyclic_byte_counter - query only
BAD_PARAM | 0x2FD215 | sw_rq_counter_sw_rcyclic_byte_counter -query only
BAD_PARAM | 0x7698D9 | create_qp: no sq -> log_sq_size is reserved.
BAD_PARAM | 0x317227 | create_qp: sq_size > MAX_QP_SIZE
BAD_PARAM | 0x302CBD | create_qp: rq_size > MAX_QP_SIZE
BAD_PARAM | 0x7BE362 | create_qp : bad cs_res
BAD_PARAM | 0x3F86E4 | create_qp: bad cs_req
BAD_PARAM | 0x4A9CAF | create_qp: bad ulp_stateless_offload_mode
BAD_PARAM | 0x36B274 | create_qp: ulp_stateless_offload_mode is supported for UD QP only.
BAD_PARAM | 0x3ADA02 | create_qp: bad cs_res need to be != 0x1 in UD/MLX/DC mode
BAD_PARAM | 0x327D8F | create_qp: atomic_like_write_en valid in connected mode only when ts!=DCI.
BAD_PARAM | 0x567DA3 | create_qp: bad cs_res: reserved in DCI case.
BAD_PARAM | 0x11ED19 | create_qp: bad cs_res 0x2 not supported in UD when cgs=0x0
BAD_PARAM | 0x1FF868 | create_qp: cgs is reserved for non-UD QPs
BAD_PARAM | 0x2D2509 | create_qp: block_lb_mc only supported on unconnected service types
BAD_PARAM | 0x05A897 | create_qp: cs_req valid in connected mode only.
BAD_PARAM | 0x7E70FD | create_qp: reserved not zero.
BAD_PARAM | 0x7D7C6E | SYNC_UMR must come with rq type == no_rq.
BAD_PARAM | 0x1F187A | create_qp: free_ar cannot be set in reliable qp.
BAD_PARAM | 0x58BF83 | create_qp: log_page_size cannot be bigger than 19 (2G) units 4K
BAD_PARAM | 0x19774A | create_qp: packet_pacing_rate_limit_index is not supported.
BAD_PARAM | 0x228DD9 | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id 0x0 is reserved
BAD_PARAM | 0x68E078 | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id > max counter_set_id
BAD_PARAM | 0x01507C | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id doesn't exist
BAD_PARAM | 0x3E0D16 | create_dct: bad opcode_modifier
BAD_PARAM | 0x0E3FAC | create_dct: DC is not supported in hca cap configuration.
BAD_PARAM | 0x210B13 | create_dct: state field is reserved during create
BAD_PARAM | 0x27DA36 | create_dct: bad port number
BAD_PARAM | 0x2E4253 | create_dct: dc_access_key_violation_count is reserve during create
BAD_PARAM | 0x6F14CE | create_dct: when rae=1, atomic_mode must be != 0
BAD_PARAM | 0x56763A | create_dct: atomic_mode is reserved without rae
BAD_PARAM | 0x0AA52F | create_dct: bad cs_res
BAD_PARAM | 0x319166 | create_dct: bad mtu enumeration
BAD_PARAM | 0x29B3F4 | DCT pkey_index is larger than device cap
BAD_OP | 0x441CC5 | bad opcode
BAD_RESOURCE | 0x671120 | modify_qp/arm_rq/arm_dct/mcg command: attempt to access reserved qpn number
BAD_RESOURCE | 0x21FA8C | modify_qp/arm_rq/arm_dct/mcg command: attempt to access reserved qpn number
BAD_RES_STATE | 0x355534 | modify_qp/arm_rq/arm_dct/mcg command: invalid qp number.
BAD_PARAM | 0x78DA49 | manage_pages: opcode modifier > 2
BAD_INPUT_LEN | 0x1275FD | manage_pages: bad input length
BAD_OUTPUT_LEN | 0x31F42C | manage_pages: bad output length
BAD_PARAM | 0x6D5FE7 | manage_pages: reserved fields are not zero
BAD_PARAM | 0x557FCD | manage_pages: reserved fields are not zero
BAD_PARAM | 0x453913 | manage_pages: reserved fields are not zero
BAD_SYS_STATE | 0x278A55 | set_hca_cap: can be execute just before init_hca.
BAD_INPUT_LEN | 0x7A2865 | Query HCA capabilities: bad input length
BAD_PARAM | 0x30A05D | set_hca_cap: bad log_uar_page_sz
BAD_PARAM | 0x5B724A | set_hca_cap: bad log_max_qp
BAD_PARAM | 0x2381FC | set_hca_cap: bad log_max_ra_req_qp
BAD_PARAM | 0x0974DA | set_hca_cap: bad log_max_ra_res_qp
BAD_PARAM | 0x5A4D4A | set_hca_cap: bad pkey_table_size
BAD_PARAM | 0x722D0B | set_hca_cap: bad gid_table_size
BAD_PARAM | 0xC324D1 | set_hca_cap: DC is not supported
BAD_PARAM | 0xAFBB66 | access_register PCMR: invalid port
BAD_PARAM | 0x202A95 | access_register PCMR: ib not supported
BAD_PARAM | 0x403D24 | access_register: perf_counters global bad cmd field > 1
BAD_PARAM | 0x570B1F | access_register: perf_counters cfg bad uint_id
BAD_PARAM | 0x0BBD5E | access_register: perf_counters cfg bad uint_id
BAD_PARAM | 0x08D521 | access_register: perf_counters cfg bad cnt_cmd
BAD_PARAM | 0x32ACF2 | access_register: perf_counters data bad uint_id
BAD_PARAM | 0x21410C | access_register: perf_counters data bad uint_id
BAD_PARAM | 0x00466E | access_register port capabilities: bad port number
BAD_PARAM | 0x478688 | access_register port capabilities: reserved not zero 1st DW
BAD_PARAM | 0x1FB867 | access_register port capabilities: reserved not zero 1st DW
BAD_PARAM | 0x7936EB | access_register loopback ctrl: reserved not zero
BAD_PARAM | 0x5C91E6 | access_register loopback ctrl: bad port number
BAD_PARAM | 0x0B1ED8 | access_register register_pplr illegal port number
BAD_PARAM | 0x0B7411 | access_register power_settings: power_settings_level 0x1-0xfe are reserved
BAD_PARAM | 0x01AD6D | access_register fp_sl_map: 0 is an illegal port number
BAD_PARAM | 0x2505FD | access_register fp_sl_map: only 0x1-0x2 are legal port numbers
BAD_PARAM | 0x1910BB | access_register: misc_counters counter data should be 0 on write
BAD_PARAM | 0x305A09 | access_register: misc_counters write with no counter_select
BAD_PARAM | 0x123424 | access_register_dcbx_param_app : illegal link layer type
BAD_PARAM | 0x342ACB | access_register_dcbx_param_app : insufficient privileges
BAD_PARAM | 0x4367DE | access_register_dcbx_param_app : unsupported project
BAD_PARAM | 0x54FAAA | access_register_qpdp_qtct : illegal link layer type
BAD_PARAM | 0x54EACD | access_register_qpdp_qtct : insufficient privileges
BAD_PARAM | 0x54EACC | access_register_qtct_qpdp : unsupported project
BAD_PARAM | 0x326553 | access_register_qetcr : illegal link layer type
BAD_PARAM | 0x326CCD | access_register_qetcr : insufficient privileges
BAD_PARAM | 0x326EF6 | access_register_qetcr : illegal max_bw_units
BAD_PARAM | 0x326EF1 | access_register_qetcr : illegal max_bw_alloc
BAD_PARAM | 0x326555 | access_register_qetcr : illegal tcg
BAD_PARAM | 0x326554 | access_register_qetcr : unsupported project
BAD_SYS_STATE | 0x0523AB | access_register: cannot access this register_id after init hca
BAD_SYS_STATE | 0x2E733E | access_register: cannot access this register_id before init hca or in nic_interface_type != 0
BAD_SYS_STATE | 0x192DEB | access_register: cannot access this register_id before init hca
BAD_PARAM | 0x2C16B3 | access_register: reset_counter bad opcode modifyer
BAD_PARAM | 0x24246C | access_register: DB threshold opcode modifyer, legal values 0,1
BAD_PARAM | 0x6F66BA | access_register PVLC port check: invalid port number
BAD_PARAM | 0x603397 | access_register PVLC port check: register only supported for IB
BAD_PARAM | 0x6C4D48 | this access_register isn't supported yet
BAD_INPUT_LEN | 0x6D5541 | access_register: bad input length
BAD_OUTPUT_LEN | 0x0CFF83 | access_register: bad output length
BAD_PARAM | 0x33CF00 | create_rq/rmp: end_pad_mode must be <= 1
BAD_PARAM | 0x6AAEBB | create_rq/rmp: log2_hds_buf_size not supported
BAD_PARAM | 0x68D9B8 | create_rq/rmp: hds_skip_first_sge not supported
BAD_PARAM | 0x6A3698 | create_rq/rmp: lwm is not supported
BAD_PARAM | 0x3B8510 | create_rq/rmp: dbr address must be dword aligned
BAD_PARAM | 0x3E8512 | create_rq/rmp: cd_slave is reserved
BAD_PARAM | 0x3B8512 | create_rq/rmp: uar_page is reserved
BAD_PARAM | 0x293DA6 | create_rq/rmp: log wq stride max value is 9
BAD_PARAM | 0x04D77A | create_rq/rmp: rq_size > MAX_QP_SIZE
BAD_PARAM | 0x193DA6 | create_rq/rmp: log wq stride for rq must be at least 4
BAD_PARAM | 0x5049A9 | create_rq/rmp: log wq stride for rq with ctrl must be at least 5
BAD_PARAM | 0x0642F0 | two_byte_shift_en is valid only in striding rq
BAD_PARAM | 0x48A79B | log_wqe_num_of_strides is valid only in striding rq
BAD_PARAM | 0x0443C8 | log_wqe_stride_size is valid only in striding rq
BAD_PARAM | 0x184CB3 | create_rq/rmp: log wq stride for rq linked list must be at least 5
BAD_PARAM | 0x37F414 | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for rq linked list
BAD_PARAM | 0x07791B | two_byte_shift_en is valid only in striding rq
BAD_PARAM | 0x528685 | log_wqe_num_of_strides is valid only in striding rq
BAD_PARAM | 0x4443F1 | log_wqe_stride_size is valid only in striding rq
BAD_PARAM | 0x2ECC0E | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for cyclic striding rq
BAD_PARAM | 0x183317 | create_rq: log wq stride for striding rq must be at least 5
BAD_PARAM | 0x1CF9D6 | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for linked list striding rq
BAD_PARAM | 0x52D912 | create_rq: log wq stride for striding rq must be at least 5
BAD_PARAM | 0x4ADF4E | create_rq/rmp: invalid wq_type
BAD_OP | 0x032626 | create rmp: not supported for issi = 0
BAD_OUTPUT_LEN | 0x035623 | create rmp: bad output length
BAD_PARAM | 0x2CB7CD | create rmp:log_wq_pg_sz cannot be bigger than 19 (2G) notice 4K units
BAD_PARAM | 0x1049E2 | create rmp: bad opcode modifier
BAD_PARAM | 0xAD604A | create_rmp: only state RDY is supported
BAD_OP | 0x032624 | create srq: not supported for issi != 0
BAD_OP | 0x032625 | create xrc_srq: not supported for issi = 0
BAD_INPUT_LEN | 0x032623 | create srq: bad input length
BAD_PARAM | 0x2049E2 | srq commands : bad opcode modifier
BAD_PARAM | 0x111A3F | srq commands: srq buffer too big log_srq_size > LOG_MAX_SRQ_SIZE
BAD_PARAM | 0x011C9D | srq commands: srq buffer too small
BAD_PARAM | 0x220743 | srq commands: srq stride too small
BAD_PARAM | 0x009A93 | srq commands: srq stride too big
BAD_PARAM | 0x20239C | srq commands: srq state is reserved.
BAD_PARAM | 0x1DD605 | srq commands: srq.lwm reserved on create
BAD_PARAM | 0x49D322 | srq commands: srq.wqe_cnt reserved on create
BAD_PARAM | 0x12A54E | srq commands:log_page_size cannot be bigger than 19 (2G) notice 4K units
BAD_PARAM | 0x441D01 | srq commands: basic_cyclic_rcv_wqe not supported
BAD_RESOURCE | 0x1B118E | query_srq/arm_srq: attempt to access reserved srqn
BAD_RES_STATE | 0x785B7D | query_srq/arm_srq: bad srq index
BAD_OP | 0x031624 | query srq: not supported for issi != 0
BAD_OUTPUT_LEN | 0x4B57A5 | query_srq: bad output length
BAD_PARAM | 0x65FE9A | query_srq: bad opcode modifier
BAD_OUTPUT_LEN | 0x4B57A6 | query_rmp: bad output length
BAD_PARAM | 0x65FE96 | query_rmp: bad opcode modifier
BAD_OP | 0x5937D1 | bad opcode.
BAD_INPUT_LEN | 0x21D355 | attach_detach_from_mcg: bad input length
BAD_OP | 0x00C396 | attach_detach_from_mcg: bad opcode modifier
BAD_PARAM | 0x65CBA5 | attach_detach_from_mcg: illegal mcg address
BAD_PARAM | 0x3B3207 | attach_detach_from_mcg: can't attach qp with connected transport type to mcg
BAD_INPUT_LEN | 0x3822D9 | generate_eqe: bad input length
BAD_OUTPUT_LEN | 0x0697FB | generate_eqe: bad output length
BAD_OP | 0x2BC31B | bad opcode.
BAD_PARAM | 0x55DFA3 | bad op_mod
BAD_OUTPUT_LEN | 0x47D8A0 | arm_rq: bad output length
BAD_PARAM | 0x0D6045 | arm_rq: (opcode mod == 0)
BAD_OUTPUT_LEN | 0x4ED8A0 | modify_rmp: bad output length
BAD_PARAM | 0x0D604E | modify_rmp: opcode_mode is reserved
BAD_PARAM | 0x0D604A | modify_rmp: only state RDY is supported
BAD_PARAM | 0x0D123B | modify_rmp: only bit 0 in modify_bitmask is valid
BAD_OUTPUT_LEN | 0x347AD9 | arm_dct_for_key_violation: bad output length
BAD_PARAM | 0x79876F | arm_dct_for_key_violation: (opcode mod != 0)
BAD_INPUT_LEN | 0x0166EB | set_mad_demux: bad input length
BAD_INPUT_LEN | 0x45E8DB | query_vport_counter: bad input length
BAD_OUTPUT_LEN | 0x7F4257 | query_vport_counter: bad output length
BAD_PARAM | 0x0F5C3F | query_vport_counter: op_mod is reserved
BAD_INPUT_LEN | 0x7F403F | rst2init_qp: bad input length
BAD_PARAM | 0x42D0D3 | rst2init_qp: bad opcode modifier
BAD_PARAM | 0x51C12E | rst2init_qp: opt_param_mask != 0
BAD_RES_STATE | 0x0E5ACC | rst2init_qp: invalid qp number.
BAD_QP_STATE | 0x22D561 | rst2init_qp: qp is not in reset state
BAD_PARAM | 0xC3C061 | create_qp: lag_tx_port_affinity not suppoerted.
BAD_PARAM | 0x4A11A2 | create_qp: lag_tx_port_affinity supported only for lag master.
BAD_PARAM | 0x26319E | create_qp: bad lag_tx_port_affinity
RESOURCE_BUSY | 0x5D75A3 | activate_tracer: hw tracer is already used by code coverage
BAD_PARAM | 0x15A5F8 | activate_tracer: bad_mkey, cannot be used for address translation
BAD_PARAM | 0x0B6F45 | activate_tracer: bad mkey, length must be 4K aligned
BAD_PARAM | 0x0B6F44 | activate_tracer: bad mkey, local write is not enabled
RESOURCE_BUSY | 0x60DF34 | activate_tracer: tracer is already activated
BAD_PARAM | 0x46D451 | vport commands: insufficient privileges
BAD_PARAM | 0x35E4FF | vport commands: bad port_number. vport number is too high
BAD_PARAM | 0x0754A4 | vport commands: bad port_number, vport number must be 0 if input_other_vport is not set.
BAD_OP | 0x085BFF | set_pp_rate_limit: bad op_mod
BAD_OP | 0x3123B1 | set_pp_rate_limit: command is valid only for ethernet port
BAD_PARAM | 0x1BBB67 | set_pp_rate_limit_cmd: packet pacing is not allowed
BAD_PARAM | 0x145667 | set_pp_rate_limit_cmd: rate limit index 0 is reserved
BAD_PARAM | 0xCDF667 | set_pp_rate_limit_cmd: rate_limit_index is too high
BAD_PARAM | 0x356667 | set_pp_rate_limit_cmd: rate limit value is too high
BAD_PARAM | 0x358767 | set_pp_rate_limit_cmd: rate limit value is too low
BAD_OP | 0x345BFF | query_pp_rate_limit: bad op_mod
BAD_OP | 0x7723B1 | query_pp_rate_limit: command is valid only for ethernet port
BAD_PARAM | 0x1BFF67 | query_pp_rate_limit_cmd: packet pacing is not allowed
BAD_PARAM | 0x14F567 | query_pp_rate_limit_cmd: rate limit index 0 is reserved
BAD_PARAM | 0x149867 | query_pp_rate_limit_cmd: rate_limit_index is too high
BAD_PARAM | 0x1CCC67 | create_sq/modify_sq: packet pacing is not allowed
BAD_PARAM | 0xCFBB67 | create_sq/modify_sq: rate_limit_index is too high
BAD_OP | 0x341541 | create_sq: command is valid only for ethernet port
BAD_INPUT_LEN | 0x7CF9E6 | create sq: bad input length
BAD_PARAM | 0x551925 | create_sq: bad opcode_modifier
BAD_PARAM | 0x11D40A | create_sq: log_wq_pg_sz cannot be bigger than 19 (2G)
BAD_PARAM | 0x4E4B51 | create_sq: sq state must be RST
BAD_PARAM | 0x17A194 | create_sq: dbr_address must be dword aligned
BAD_PARAM | 0x5F5A07 | create_sq: wq_type must be 1
BAD_PARAM | 0x27A8E4 | create_sq: sq_size > MAX_QP_SIZE
BAD_PARAM | 0x0AC270 | create_sq: bad uar number
BAD_PARAM | 0x111FE2 | create_sq: wq stride must be precisely 6
BAD_PARAM | 0x162D0B | create_sq: max tis_lst_sz is 1
BAD_PARAM | 0x1B2418 | create_sq: tis_num_0 is reserved for tis_lst_sz=0
BAD_PARAM | 0x02974A | create_sq: allow_multi_pkt_send_wqe is not supported
BAD_PARAM | 0x2B4746 | create_sq: sq.min_wqe_inline_mode must be >= nic_vport.min_sq_wqe_inline_mode
BAD_OP | 0xBCE989 | modify_sq: command is valid only for ethernet port
BAD_INPUT_LEN | 0x9CF9E6 | modify sq: bad input length
BAD_PARAM | 0x551995 | modify_sq: bad opcode_modifier
BAD_RESOURCE | 0x60CD18 | modify_sq: resource is not valid
BAD_PARAM | 0x51CFBC | modify_sq: input sq_state does not match current state
BAD_PARAM | 0x51CFB0 | modify_sq: err2rdy state transition is not supported
BAD_PARAM | 0x5333B0 | modify_sq: rst2err state transition is not supported
BAD_PARAM | 0x73B4B1 | modify_sq: support packet pacing rate limit index only
BAD_PARAM | 0x245671 | modify_sq: packet_pacing_index change is allowed only for rst2rdy, rdy2rdy
BAD_OP | 0x2CD8A2 | create_rq: command is valid only for ethernet port
BAD_INPUT_LEN | 0x754762 | create_rq: bad input length
BAD_PARAM | 0x57CFFB | create_rq: bad opcode_modifier
BAD_PARAM | 0x724AEC | create_rq: rq state must be RDY
BAD_PARAM | 0x373E7E | create_rq: log_wq_pg_sz cannot be bigger than 19 (2G)
BAD_PARAM | 0x71CE3F | create_rq: RMP is not supported
BAD_PARAM | 0x3BD828 | create_rq: undefined wq_type
BAD_OP | 0x1AF075 | modify_rq: command is valid only for ethernet port
BAD_INPUT_LEN | 0x6CF9E6 | modify rq: bad input length
BAD_PARAM | 0x551965 | modify_rq: bad opcode_modifier
BAD_RESOURCE | 0x671AD0 | modify_rq: resource is not valid
BAD_PARAM | 0x669FBA | modify_rq: rst2err state transition is not supported
BAD_PARAM | 0x51CFBA | modify_rq: err2rdy state transition is not supported
BAD_PARAM | 0x7ACDB1 | modify_rq: invalid modify bitmask
BAD_PARAM | 0x24A3B1 | modify_rq: vsd/lwm/scatter_fcs change is allowed only for rst2rdy, rdy2rdy
BAD_PARAM | 0x538B5F | create/modify_rqt: rqt_max_size > MAX_RQT_SIZE
BAD_PARAM | 0x538FAF | create/modify_rqt: rqt_actual_size > rqt_max_size
BAD_PARAM | 0x538FAB | create/modify_rqt: rqt actual size must be a power of 2
BAD_PARAM | 0x538FCB | create/modify_rqt: rqt max size must be a power of 2
BAD_PARAM | 0x539FDB | create/modify_rqt: rqt size must be > 0
BAD_PARAM | 0x698B5F | modify_rqt: only bit 0 is valid in modify_bitmask
BAD_OP | 0xFE2CCD | create_tis: command is valid only for ethernet port
BAD_INPUT_LEN | 0x0DE7A0 | create_tis: bad input length
BAD_PARAM | 0x6A5278 | create_tis: bad opcode modifier
BAD_PARAM | 0x564B4C | create_tis: strict_affinity cannot have lag_tx_port_affinity
BAD_PARAM | 0x5978A9 | create_tis: lag_tx_port_affinity not suppoerted.
BAD_PARAM | 0x44F1F9 | create_tis: lag_tx_port_affinity supported only for lag master.
BAD_PARAM | 0x595B5D | create_tis: bad lag_tx_port_affinity
BAD_OP | 0xFE1BA3 | create/modify_tir: command is valid only for ethernet port
BAD_PARAM | 0x709018 | create modify tir: bad opcode_modifier
BAD_PARAM | 0x4C0EC1 | create tir: disp_type value can be 0 or 1
BAD_PARAM | 0x4B0519 | create/modify_tir: indirect_table is reserved for disp_type direct
BAD_PARAM | 0x4B0518 | create/modify_tir: direct_rqn is reserved for disp_type indirect
BAD_PARAM | 0x75C809 | create_tir: invalid self_lb_block
BAD_PARAM | 0x177FBD | modify_tir: bitmask value is not legal
BAD_PARAM | 0x177FDD | modify_tir: disp_type is reserved
BAD_PARAM | 0x4C0519 | modify_tir: inline_rqn is reserved
BAD_RESOURCE | 0x47B03E | modify_tir: invalid tir
BAD_PARAM | 0x2D1EEC | create/modify_tir: bitmask value is not legal for disp_type direct
BAD_PARAM | 0x177FDE | create/modify_tir: indirect_table is reserved
BAD_PARAM | 0x30EC1E | create/modify_tir: lro params are reserved if lro_enable_mask not set
BAD_PARAM | 0x793CE4 | create/modify_tir: lro params are reserved if lro_enable_mask not set
BAD_PARAM | 0x176FDE | modify_tir: lro params are reserved if lro bitmask not set
BAD_PARAM | 0x178FDE | modify_tir: lro params are reserved if lro bitmask not set
BAD_PARAM | 0x179FDE | modify_tir: lro params are reserved if lro bitmask not set
BAD_PARAM | 0x0479A3 | create modify tir: invalid rx_hash_fn
BAD_PARAM | 0x067146 | create modify tir: disp_type is indirect, but rx_hash_fn is none
BAD_PARAM | 0x727E5F | create modify tir: rx_hash_fn is none, but rx_hash_symmetric is not reserved
BAD_PARAM | 0x1D2602 | create modify tir: rx_hash_fn must be NONE for disp_type direct
BAD_PARAM | 0x569EE6 | create modify tir: rx_hash_fn is not toeplitz, but rx_hash_toeplitz_key is not reserved
BAD_PARAM | 0x3C59ED | create modify tir: rx_hash_fn is none, but outer hash selectors aren't reserved
BAD_PARAM | 0x1C914B | create modify tir: rx_hash_fn is none, but inner hash selectors aren't reserved
BAD_PARAM | 0x201139 | create modify tir: stateless tunneled offload is not supported
BAD_PARAM | 0x562B00 | create modify tir: rx_hash_field_selector_inner is valid only when tunneled_offload_en is set
BAD_PARAM | 0x001139 | create modify tir: inner/outer hash selectors are mutual exclusive
BAD_PARAM | 0x76D4CC | create modify tir: invalid outer hash field selector
BAD_PARAM | 0x21D95B | create modify tir: invalid inner hash field selector
BAD_PARAM | 0x4F161A | create modify tir: rx_hash modify_bitmask isn't set, but rx_hash_symmetric is not reserved
BAD_PARAM | 0x514708 | create modify tir: rx_hash modify_bitmask isn't set, but rx_hash_fn is not reserved
BAD_OP | 0x11ABF1 | alloc_encap: command is valid only for ethernet port
BAD_INPUT_LEN | 0x0C6C1D | alloc_encap: bad input length
BAD_OP | 0x348FBD | alloc_encap: bad opcode modifier
BAD_PARAM | 0x8E3120 | alloc_encap: bad encap_header_size
BAD_PARAM | 0x46618F | alloc_encap: bad encap_header_size + 2 must be align to 4
BAD_PARAM | 0x46618E | alloc_encap: bad encap_header_type
BAD_OUTPUT_LEN | 0x51552B | query_nic_vport_context: bad output length
BAD_OUTPUT_LEN | 0x3B7FBF | query_nic_vport_context: bad input length
BAD_OP | 0x2F4BF1 | query_nic_vport_context: command is valid only for ethernet port
BAD_PARAM | 0x2B196F | query_nic_vport_context: op_mod is reserved
BAD_OUTPUT_LEN | 0x554267 | modify_nic_vport_context: bad output length
BAD_OUTPUT_LEN | 0x2E83D3 | modify_nic_vport_context: bad input length
BAD_OP | 0x4E4CE0 | modify_nic_vport_context: command is valid only for ethernet port
BAD_PARAM | 0x3F26DC | modify_nic_vport_context: op_mod is reserved
BAD_PARAM | 0x19320A | modify_nic_vport_context: insufficient privileges, cannot modfiy other vports address_list/roce/ptomisc
BAD_PARAM | 0x5EE994 | modify_nic_vport_context: vport group manager can not modify its own min_wqe_inline_mode/port_guid/node_guid/permanent_addr
BAD_PARAM | 0x19356A | modify_nic_vport_context: only vport group manager is allowed to modify change_events/min_wqe_inline_mode/port_guid/node_guid/permanent_addr
BAD_PARAM | 0xC1F678 | modify_nic_vport_context: roce_en set on a vport that doesn't support roce
BAD_INPUT_LEN | 0x33FFA3 | query_esw_vport_context: bad input len
BAD_OUTPUT_LEN | 0x23DF67 | query_esw_vport_context: bad output len
BAD_OP | 0x116BCC | query_esw_vport_context: op_mod is reserved
BAD_OP | 0x4EAFE7 | query_esw_vport_context: command is valid only for ethernet port
BAD_INPUT_LEN | 0x2BDAA3 | modify_esw_vport_context: bad input len
BAD_OUTPUT_LEN | 0x23D456 | modify_esw_vport_context: bad output len
BAD_OP | 0x266AAB | modify_esw_vport_context: op_mod is reserved
BAD_OP | 0x433CE0 | modify_esw_vport_context: command is valid only for ethernet port
BAD_PARAM | 0x326B6C | modify_esw_vport_context: svlan_insert is set but svlan_insert_field_select is off
BAD_PARAM | 0x735020 | modify_esw_vport_context: svlan_insert is off but svlan fields are not reserved
BAD_PARAM | 0x2D76B3 | modify_esw_vport_context: cvlan_insert is set but cvlan_insert_field_select is off
BAD_PARAM | 0x32C8AB | modify_esw_vport_context: cvlan_insert is off but cvlan fields are not reserved
BAD_INPUT_LEN | 0x44BC7C | set_roce_address: bad input len
BAD_OUTPUT_LEN | 0x7FDB57 | set_roce_address: bad output len
BAD_OP | 0x427418 | set_roce_address: command is valid only for ethernet port
BAD_OP | 0x427419 | set_roce_address: op_mod is reserved
BAD_PARAM | 0x26D532 | set_roce_address: vlan id is reserved when vlan_valid=0
BAD_PARAM | 0x729BBB | set_roce_address: invalid roce_l3_type type
BAD_PARAM | 0x12822D | set_roce_address: invalid roce_version
BAD_PARAM | 0x79DF98 | set_roce_address: for roce_version=0, roce_l3_type is reserved
BAD_INDEX | 0x063C65 | set_roce_address: roce_address_index not valid
BAD_PARAM | 0x063C66 | set_roce_address: multicast source_mac is not allowed
BAD_OP | 0xAAFD4F | vport commands: command is valid only for ethernet port
BAD_PARAM | 0x493CC9 | vport commands: bad port_number. vport number is too high
BAD_PARAM | 0x63993F | query_vport_state: query uplink state - vport_number/other_vport is reserved
BAD_PARAM | 0x311733 | vport commands: not privileged
BAD_PARAM | 0x457F0C | vport commands:: not privileged
BAD_PARAM | 0x36A82E | flow_table: esw fdb configuration is valid only for vport_group_manager
BAD_PARAM | 0x4DAD27 | flow_table: unsupported table_type
BAD_PARAM | 0x2AC754 | flow_table: currently Flow Table does not supports IB port
BAD_PARAM | 0x7684D8 | flow_table: other_vport is valid only for ACL flow tables
BAD_RES_STATE | 0x98AFBB | create_flow_table: encap FT creation is allowed only if all VFs aren't initialized
BAD_PARAM | 0x857045 | create_flow_table: lag_master_next_table_id is reserevd for non LAG demux FT
BAD_PARAM | 0x5F1732 | create_flow_table: table log_size > FT_LOG_MAX_SIZE
BAD_PARAM | 0x6678D3 | create_flow_table: invalid table_miss_mode
BAD_PARAM | 0x66F5E4 | create_flow_table: table_miss_id is reserved when miss_mode != 1
BAD_PARAM | 0xE2A3AA | create_flow_table: LAG demux FT is supported only for the LAG master
BAD_PARAM | 0x3F3277 | create_flow_table: LAG demux FT is supported only for RX NIC FT
BAD_PARAM | 0x04EE19 | create_flow_table: table log_size is reserevd for LAG demux FT
BAD_PARAM | 0xFA64A1 | create_flow_table: table_miss_mode is reserevd for LAG demux FT
BAD_PARAM | 0x8FCF23 | create_flow_table: table_miss_id is reserevd for LAG demux FT
BAD_PARAM | 0xED3492 | create_flow_table: encap_en is reserevd for LAG demux FT
BAD_PARAM | 0x705D9D | create_flow_table: decap_en is reserevd for LAG demux FT
BAD_OP | 0x7A9C87 | create_flow_table: invalid op_mod
BAD_PARAM | 0x5578D3 | create_flow_table: table level > FT_MAX_LEVEL
BAD_PARAM | 0xA05644 | create_flow_table: Table doesn't support encap
BAD_PARAM | 0x69269E | create_flow_table: Table doesn't support decap
BAD_OP | 0x4078BE | modify_flow_table: op_mod is reserved
BAD_PARAM | 0x5F8189 | modify_flow_table: illegal modify_field_select
BAD_PARAM | 0x056B12 | modify_flow_table: illegal modify_field_select for LAG demux FT
BAD_PARAM | 0x42A3E8 | modify_flow_table: modofing the LAG demux next table is allowed only for LAG demux FT
BAD_PARAM | 0x4EF5E3 | modify_flow_table: invalid table_miss_mode
BAD_PARAM | 0x4EF5E4 | modify_flow_table: table_miss_id is reserved when miss_mode != 1
BAD_INPUT_LEN | 0x67847C | create_flow_group: bad input len
BAD_OUTPUT_LEN | 0x527B57 | create_flow_group: bad output len
BAD_OP | 0x0E5810 | create_flow_group: op_mod is reserved
BAD_PARAM | 0x1D1B31 | create_flow_group: start_flow_index is bigger than end_flow_index
BAD_PARAM | 0x4065F0 | create_flow_group: end_flow_index >= FT_MAX_SIZE
BAD_PARAM | 0xAE9A70 | create_flow_group: creating flow group in the LAG demux FT is forbidden
BAD_INPUT_LEN | 0x2BDEBE | set_flow_table_entry: bad input len
BAD_OUTPUT_LEN | 0x11FF56 | set_flow_table_entry: bad output len
BAD_OP | 0x5342CD | set_flow_table_entry: invalid op_mod
BAD_PARAM | 0x1C57DD | set_flow_table_entry: modify_enable_mask is reserved
BAD_PARAM | 0x2022FB | set_flow_table_entry: illegal modify_enable_mask
BAD_PARAM | 0x5FAB40 | set_flow_table_entry: invalid flow_index
BAD_PARAM | 0xFDBD26 | set_flow_table_entry: flow_tag not supported for this flow table type
BAD_PARAM | 0x4731C4 | set_flow_table_entry: flow_counter doesn't support for this flow table type
BAD_PARAM | 0x0D5EF2 | set_flow_table_entry: currently only one flow counter is supported per flow
BAD_PARAM | 0x603D26 | set_flow_table_entry: trying to set a new flow table entry but flow index already exist
BAD_PARAM | 0x883D26 | set_flow_table_entry: trying to modify flow table entry but flow index does not exist
BAD_PARAM | 0x144B7A | set_flow_table_entry: flow table entry must has exactly one action set (fwd/drop/allow)
BAD_PARAM | 0x4DDEE6 | set_flow_table_entry: flow_counter_list_size is valid iff count action is set
BAD_PARAM | 0x214DE0 | set_flow_table_entry: destination_list_size is valid iff fwd action is set
BAD_PARAM | 0x3E29DE | set_flow_table_entry: destination_list_size greater than max supported
BAD_PARAM | 0x155B7A | set_flow_table_entry: encap_id is reserved while encap action is off
BAD_PARAM | 0x62AD2F | set_flow_table_entry: decap action not supported on this device
BAD_PARAM | 0x5BDC28 | set_flow_table_entry: FT_ACTION_ENCAP action in a table without encap_en
BAD_PARAM | 0x604D25 | set_flow_table_entry: FT_ACTION_DECAP action in a table without decap_en
BAD_PARAM | 0x3322FB | set_flow_table_entry: illegal action
BAD_PARAM | 0x5FAB41 | delete_flow_table_entry: invalid flow_index
BAD_OP | 0x3EB7E7 | delete_flow_table_entry: op_mod is reserved
BAD_PARAM | 0x4EFC3D | delete_flow_table_entry: rule doesn't exist
BAD_INPUT_LEN | 0x1D1437 | query_flow_table_entry: bad input len
BAD_OUTPUT_LEN | 0x611D98 | query_flow_table_entry: bad output len
BAD_OP | 0x0AB1E9 | query_flow_table_entry: op_mod is reserved
BAD_PARAM | 0x5FAB42 | query_flow_table_entry: invalid flow_index
BAD_PARAM | 0x63213B | query_flow_table_entry: rule doesn't exist
BAD_PARAM | 0x706441 | l2_table_entry: l2 table configuration is valid only for vport_group_manager
BAD_PARAM | 0x471805 | l2_table_entry: l2 table commands are not supported for port type ib
BAD_PARAM | 0x03A55E | l2_table_entry: table_index > MAX_L2_TABLE_SIZE
BAD_OP | 0x11AFD1 | l2_table_entry: op_mod is reserved
BAD_PARAM | 0x4E810D | query/dealloc_flow_counter: flow_counter_ix is reserved
BAD_PARAM | 0x05DC2C | query/dealloc_flow_counter: flow_counter_ix doesn't exist
BAD_OP | 0x53F4BF1| query_flow_counter: command is valid only for ethernet port
BAD_OP | 0x04020A | query_flow_counter: op_mod is reserved
BAD_PARAM | 0xFFD2A0 | query_flow_counter: clear is not supported when reading bulk
BAD_PARAM | 0x1737C5 | query_bulk_flow_counter: num_counters is too big
BAD_PARAM | 0x14F472 | query_bulk_flow_counter: num_counters is bigger than num of HW counters
BAD_PARAM | 0xC2AF44 | query_bulk_flow_counter: flow_counter_ix is not cache aligned (4 counters)
BAD_PARAM | 0x7EA3B3 | query_bulk_flow_counter: number of counters is not cache aligned (4 counters)
BAD_OUTPUT_LEN | 0x263839 | query_flow_counter: bad output lengt
BAD_PARAM | 0x0E701A | add_vxlan_udp_dport: only PFs are allowed to modify the vxlan dport
BAD_PARAM | 0x03E78D | add_vxlan_udp_dport: vxlan commands are not supported for port type ib
BAD_PARAM | 0x1595FA | add_vxlan_udp_dport: udp port 0 is illegal
BAD_INPUT_LEN | 0x6C8FBB | add_vxlan_udp_dport: bad input len
BAD_OUTPUT_LEN | 0x6D7E67 | add_vxlan_udp_dport: bad output len
BAD_OP | 0x62F4C9 | add_vxlan_udp_dport: op_mod is reserved
BAD_PARAM | 0x79D920 | delete_vxlan_udp_dport: only PFs are allowed to modify the vxlan dport
BAD_PARAM | 0x091DB1 | delete_vxlan_udp_dport: vxlan commands are not supported for port type ib
BAD_INPUT_LEN | 0x5BBF13 | delete_vxlan_udp_dport: bad input len
BAD_OUTPUT_LEN | 0x66B6FC | delete_vxlan_udp_dport: bad output len
BAD_OP | 0x0641AF | delete_vxlan_udp_dport: op_mod is reserved
BAD_PARAM | 0x249AD6 | check_modify_cong_params_ecn_rp: dec_fac should be in 0-100 range
BAD_PARAM | 0x7076FC | check_modify_cong_params_qcn_rp: dec_fac should be in 0-100 range
BAD_INPUT_LEN | 0x5BEEFD | check_modify_cong_params:bad input len
BAD_OUTPUT_LEN | 0x70CE1A | check_modify_cong_params:bad output len
BAD_PARAM | 0x58C4C9 | check_modify_cong_params:cong_protocol unsupprted protocol
BAD_INPUT_LEN | 0x5B6843 | check_query_cong_params:bad input len
BAD_OUTPUT_LEN | 0x0D468B | check_query_cong_params:bad output len
BAD_PARAM | 0x325A82 | check_query_cong_params:cong_protocol unsupprted protocol
BAD_INPUT_LEN | 0x5A48F1 | check_modify_cong_status:bad input len
BAD_OUTPUT_LEN | 0x41F0EA | check_modify_cong_status:bad output len
BAD_PARAM | 0x38252F | check_modify_cong_status:cong_protocol unsupprted protocol
BAD_PARAM | 0x27A3FB | check_modify_cong_status:tag enable is only valid for QCN
BAD_INPUT_LEN | 0x2498E2 | check_query_cong_status:bad input len
BAD_OUTPUT_LEN | 0x245260 | check_query_cong_status:bad output len
BAD_PARAM | 0x507EE9 | check_query_cong_status:cong_protocol unsupprted protocol
BAD_SYS_STATE | 0x2207A9 | enable_hca: HCA already enabled
BAD_SYS_STATE | 0x2DC0EB | enable_hca: bad state LAG ENABLE
BAD_SYS_STATE | 0x075C88 | enable_hca: function_id already enabled
BAD_SYS_STATE | 0x034D7C | disable_hca: error, teardown_hca required before disable_hca
BAD_PARAM | 0x239208 | bad PAS - reserved not zero
BAD_OP | 0x3590F5 | bad opcode, or opcode not supported in this device
BAD_RES_STATE | 0x30F433 | destroy_eq: eqn in use or doesn't exist
EXCEED_LIM | 0x7957C3 | create_eq: fail to allocate eqn
EXCEED_LIM | 0x54B156 | create_eq: fail to allocate/map mtt index
BAD_RES_STATE | 0x1870AD | destroy cq: cqn in use or doesn't exist
EXCEED_LIM | 0x0E0E82 | create_cq: fail to allocate cqn
BAD_RESOURCE | 0x0C43F4 | create_cq: eqn doesn't exist
EXCEED_LIM | 0x62BBC6 | create_cq: fail to allocate mtt index
BAD_OP | 0x7A5594 | bad opcode
EXCEED_LIM | 0x777543 | resize cq: failed to allocate MTT number
EXCEED_LIM | 0x0366A2 | modify_cq: CQ in already in error, can not resize CQ
BAD_SYS_STATE | 0x711B8C | resize_cq: failed to read CQ consumer index
BAD_SIZE | 0x1900B2 | resize_cq: current number of outstanding CQEs greater than new CQ size, or no space for magic CQE in old CQ
BAD_RESOURCE | 0x67239E | create_cq: eqn doesn't exist
BAD_RESOURCE | 0x7AEF6C | config int moderation - failed to access msix
EXCEED_LIM | 0x587239 | alloc_q_counter: failed to allocate q_counter resource number
BAD_RES_STATE | 0x1235F1 | dealloc_q_counter: q_counter doesn't exist
BAD_OUTPUT_LEN | 0x723EAD | query_q_counter: bad output length
EXCEED_LIM | 0x587439 | alloc_pd: failed to allocate pd resource number
BAD_RESOURCE | 0x3AB806 | dealloc_pd: bad op_mod
BAD_RESOURCE | 0x593117 | dealloc_pd: attempt to access reserved pd
BAD_RES_STATE | 0x31B635 | dealloc_pd: pd number in use or doesn't exist
EXCEED_LIM | 0x587939 | alloc_xrcd: failed to allocate xrcd resource number
BAD_RESOURCE | 0x59D214 | dealloc_xrcd: bad op_mod
BAD_RES_STATE | 0x391F01 | dealloc_xrc_domain: xrcd number in use or doesn't exist
EXCEED_LIM | 0x5A7939 | alloc_uar: failed to allocate uar resource number
BAD_RESOURCE | 0x6273DA | dealloc_xrcd: bad op_mod
BAD_RESOURCE | 0x1AC5B8 | dealloc_uar: attempt to access reserved uar index
BAD_RES_STATE | 0x4B4EDB | dealloc_uar: uar number in use or doesn't exist
BAD_RESOURCE | 0x775607 | destroy_mkey: attempt to access reserved mkey_ix
BAD_PARAM | 0x76093F | destroy_mkey: bad op_mod
BAD_RES_STATE | 0x77502E | destroy_mkey: mkey index in use or doesn't exist
BAD_INDEX | 0x6919FE | create_mkey: failed to allocate resource_number number as requested number already allocated
EXCEED_LIM | 0x018AF6 | create_mkey: failed to allocate resource_number number (most likely out of resources)
EXCEED_LIM | 0x59C8A4 | create mkey: fail to allocate mtt/klm index
EXCEED_LIM | 0x6D50E5 | create mkey: fail to allocate bsf index
EXCEED_LIM | 0x22F901 | create_psv: fail to allocate psv index
BAD_RES_STATE | 0x4A3FD3 | generate_eqe: eq buffer is full.
BAD_PARAM | 0x4F8BB9 | destroy_srq: bad opcode modifier
BAD_RESOURCE | 0x70D476 | destroy_srq: attempt to access reserved srqn
BAD_RES_STATE | 0x7F252E | destroy srq: srqn in use or doesn't exist
BAD_PARAM | 0x4F8B89 | destroy_rmp: bad opcode modifier
BAD_RESOURCE | 0x80D476 | destroy_rmp: attempt to access reserved srqn
BAD_RES_STATE | 0x7F252F | destroy rmp: rmp in use or doesn't exist
BAD_RESOURCE | 0x5E9E82 | create_srq: cqn doesn't exist
BAD_INPUT_LEN | 0x3291EE | create srq: bad input length
EXCEED_LIM | 0x3F947D | create_srq: fail to allocate/map mtt index
EXCEED_LIM | 0x4291E8 | create_rmp: fail to allocate rmp number
BAD_PARAM | 0x892E1C | create_srq: rmp mailbox was illegally modified during proccess
EXCEED_LIM | 0x3291E8 | create_srq: fail to allocate srq number
BAD_PARAM | 0x792E1C | create_srq: input mailbox was illegally modified during proccess
BAD_PARAM | 0x1038B8 | create_srq: input mailbox was illegally modified during proccess
BAD_PARAM | 0x3A3846 | manage/query_pages, enable/disable_hca: function_id exceedes number of VFs
BAD_PARAM | 0x6BA1F4 | manage/query_pages, enable/disable_hca: function_id != 0, VF cannot manage pages for other VFs.
BAD_OUTPUT_LEN | 0x24D543 | query_pages: bad output length
BAD_PARAM | 0x27D71D | manage pages: (add) pages are not required
BAD_INPUT_LEN | 0x14AD24 | manage pages: bad input length
BAD_PARAM | 0x659C0E | manage pages: more pages than required
BAD_OUTPUT_LEN | 0x285C19 | manage pages: (return) bad output length
BAD_SYS_STATE | 0x4E2106 | manage pages: failed to read io or write host mem
BAD_SYS_STATE | 0x0E8912 | manage pages: failed read from host mem
BAD_SYS_STATE | 0x7731B2 | manage pages: failed write to mailbox
BAD_INPUT_LEN | 0x0AA602 | mad_ifc: bad input length
BAD_OUTPUT_LEN | 0x021907 | mad_ifc: bad output length
BAD_PARAM | 0x71D624 | mad_ifc: opcode modifier > 3
BAD_PARAM | 0x220275 | mad_ifc: is not supported.
BAD_PARAM | 0x7424DA | mad_ifc: invalid port number
BAD_PKT | 0x62FA16 | mad_ifc: bad packet without detailed syndrome.
BAD_PKT | 0x5BE4CF | mad_ifc: bad packet - long process
BAD_PARAM | 0x5282CF | set_hca_cap: bad params (reserved not zero)
BAD_INPUT_LEN | 0x7B2863 | set_hca_cap atomic capabilities: bad input length
BAD_PARAM | 0x6C2823 | set_hca_cap atomic capabilities: unsupported when mode1=0
BAD_OUTPUT_LEN | 0x28FF76 | set_hca_cap, unsupported op_mod (currently only 0 and 3 are supported)
BAD_PARAM | 0x5ADD95 | Query hca_cap: bad op_mod
BAD_OUTPUT_LEN | 0x38FF78 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF77 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF76 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0xD38425 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x6B345A | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x6B4E7A | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF75 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF73 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x38FF72 | query_hca_cap: bad output length
BAD_PARAM | 0x068B46 | query_hca_cap: e-switch capabilities allowed only for vport_group_manager
BAD_OUTPUT_LEN | 0x38FF79 | query_hca_cap: bad output length
BAD_PARAM | 0x2895B0 | query_hca_cap: e-switch capabilities allowed only for vport_group_manager
BAD_OUTPUT_LEN | 0x38FF74 | query_hca_cap: bad output length
BAD_OUTPUT_LEN | 0x607301 | query_hca_cap: vector calc cap bad output length
BAD_PARAM | 0x5ADD96 | Query hca_cap: bad op_mod
BAD_OUTPUT_LEN | 0x726C77 | Query adapter: bad output length
BAD_PARAM | 0x471AEF | Query adapter: bad op_mod
BAD_PARAM | 0x1E5585 | reg_access_ports_perf_counters: bad params
BAD_PARAM | 0x450452 | access_register port capabilities: write option is not supported
BAD_PARAM | 0x01D849 | access_register port capabilities: write option is not supported
BAD_PARAM | 0x60F5CC | access_register MPEIN: write option is not supported
BAD_PARAM | 0x136488 | set_wol_rol: opcode mod must be zero
BAD_OP | 0x745959 | set_wol_rol: command is allowed only for function per port mode
BAD_OP | 0x1A4F91 | set_wol_rol: command is allowed for physical function only
BAD_OP | 0x157659 | set_wol_rol: eth only command
BAD_OP | 0x376559 | set_wol_rol: device don't support wol on the selected function
BAD_OP | 0x261053 | query_wol_rol: command is allowed only in function per port mode
BAD_OP | 0x257659 | query_wol_rol: eth only command
BAD_PARAM | 0x033EEF | access_register pvlc: write operation not supported
BAD_PARAM | 0x792FB4 | reg_access_pvlc: invalid local port.
BAD_PARAM | 0x15C356 | access_register port capabilities: write option is not supported
BAD_PARAM | 0x0B2F6E | access_register PMLP: invalid port
BAD_PARAM | 0x1476BD | Flow control, PFCC, pfc mask not supported (pfctx or pfcrx) when pprx_v or pptx_v are set.
BAD_PARAM | 0x2C6A90 | flow control, PFCC wrong port number
BAD_PARAM | 0x16DBB4 | flow control, PFCC port number is not valid
BAD_PARAM | 0x35ADBC | Bad param for PFCC: get admin not supported
BAD_PARAM | 0x3544EC | Bad param for PFCC: set remote not supported
BAD_PARAM | 0x19EFDC | bad param for PFCC:operation type not supported
BAD_PARAM | 0x1DF56C | Bad param: TSA not definied
BAD_PARAM | 0x15DABC | Bad param for QETCR: get admin not supported
BAD_PARAM | 0xDE13456| bad param for QETCR: remote algorithm not supported
BAD_PARAM | 0xDE1FC5 | bad param for QETCR: set remote algorithm not supported
BAD_PARAM | 0x15DFDC | Bad param for QETCR: operation type not supported
BAD_PARAM | 0x15DFCB | Bad param for QTCT: get admin not supported
BAD_PARAM | 0x15E95B | Bad param for QTCT: remote set not supported
BAD_PARAM | 0x15D45B | Bad param for QTCT: operaton type not supported
BAD_RES_STATE | 0x361418 | query_event_map: cannot write context to output.
BAD_SYS_STATE | 0x7ADFBF | get_dropped_packet_log: packet not captured yet.
BAD_PARAM | 0x5A6AAEF| modify_rmp: Limit water mark is higher then rq/srq size.
BAD_PARAM | 0x5A6FEF | arm_rq: Limit water mark is higher then rq/srq size.
BAD_RES_STATE | 0x584EA8 | set_diagnostics: function is not PortOwner
BAD_PARAM | 0x8E8021 | set_diagnostics: The function has no permmision to set the samples from the buffer
BAD_PARAM | 0x30EA01 | set_diagnostics: num_of_counteres exceeds FW supported perf counters
BAD_INPUT_LEN | 0x9992D9 | set_diagnostics: bad input length
BAD_PARAM | 0xB66144 | set_diagnostics: Total number of samples is exceeds capability
BAD_PARAM | 0x26CF29 | set_diagnostics: log_sample_period smaller than supported
BAD_PARAM | 0x4A9391 | set_diagnostics: clearing counters is only supported in sync(Atomic) mode
BAD_PARAM | 0x8FC6D1 | set_diagnostics: choosing only one mode (single / repetitive) is allowed
BAD_PARAM | 0x6C244E | set_diagnostics: no sampling mode selected (single / repetitive)
BAD_PARAM | 0x18CCDF | set_diagnostics: counter id number is not supported
BAD_PARAM | 0x99E211 | set_diagnostics: no free performance counters for this unit
EXCEED_LIM | 0xCBEB52 | set_diagnostics: failed to allocate perf_counter resource number
BAD_PARAM | 0x49EED0 | query_diagnostics: The function has no permmision to set the samples from the buffer
BAD_PARAM | 0xE855BF | query_diagnostics: first sample index ia not supported
BAD_PARAM | 0x2A7FA7 | query_diagnostics: num of samples is not supported
BAD_RES_STATE | 0x5DE017 | arm_dct_for_key_violation: context is not a DCT
BAD_RES_STATE | 0x44E23B | arm_dct_for_key_violation: event type not mapped
BAD_RESOURCE | 0x28762F | set_burst burst size cannot be changed by VF
BAD_PARAM | 0x064868 | set_burst_size: bad burst_size (0)
BAD_PARAM | 0x3A23EE | set_burst_size: bad burst_size
BAD_PARAM | 0x3621BF | query_hca_vport_context: invalid local_port
BAD_PARAM | 0x78312E | query_hca_vport_context: opcode mod must be zero
BAD_OP | 0x482341 | query_hca_vport_context: ib only command
BAD_OUTPUT_LEN | 0x64FF1A | modify_hca_vport_context bad: output length
BAD_OUTPUT_LEN | 0x4E3D11 | modify_hca_vport_context bad: input length
BAD_PARAM | 0x244467 | modify_hca_vport_context: invalid local_port
BAD_PARAM | 0x145288 | modify_hca_vport_context: opcode mod must be zero
BAD_OP | 0x65D9A7 | modify_hca_vport_context: ib only command
BAD_PARAM | 0x58E6C1 | modify_hca_vport_context: field_select contains read only field.
BAD_SYS_STATE | 0x4CBF2E | modify_hca_vport_context: modify other vports allowed just after pf finish init_hca.
BAD_PARAM | 0x0A0003 | modify_hca_vport_context: port guid cannot be zero.
BAD_PARAM | 0x0A0004 | modify_hca_vport_context: Bad port guid (1) see SPEC: 4.1.1 GID USAGE AND PROPERTIES
BAD_PARAM | 0x437CB5 | modify_hca_vport_context: node guid cannot be zero.
BAD_PARAM | 0x154537 | modify_hca_vport_context: bad vport_state_policy
BAD_PARAM | 0x4EE45E | modify_hca_vport_context: bad cap_mask1_field_select trying to modify RO field.
BAD_PARAM | 0x1717E4 | modify_hca_vport_context: bad cap_mask2_field_select trying to modify RO field.
BAD_PARAM | 0x0E40B0 | query_hca_vport_gid: invalid local_port
BAD_PARAM | 0x4DF8F2 | query_hca_vport_gid: opcode mod must be zero
BAD_OP | 0x158999 | query_hca_vport_gid: ib only command
BAD_OUTPUT_LEN | 0x228592 | query_hca_vport_gid: bad output length gid_index = 0xffff
BAD_PARAM | 0x0FA1F5 | query_hca_vport_gid: cannot read gid_index != 0 before function performed init_hca
BAD_PARAM | 0x3DC148 | query_hca_vport_gid: bad gid_index. Index larger than hca param guid cap
BAD_OUTPUT_LEN | 0x20DE7B | query_hca_vport_gid: bad output length
BAD_PARAM | 0x54E60A | query_hca_vport_pkey: invalid local_port
BAD_PARAM | 0x40FF30 | query_hca_vport_pkey: opcode mod must be zero
BAD_PARAM | 0x0F71B2 | query_hca_vport_pkey: bad pkey_index larger than hca param guid cap
BAD_OUTPUT_LEN | 0x6705A2 | query_hca_vport_pkey: bad output length
BAD_SYS_STATE | 0x368B01 | query_vport_counter: vport is not enabled (INIT_HCA is required)
BAD_PARAM | 0x0C9387 | query_hca_vport_pkey: invalid local_port
BAD_INPUT_LEN | 0x7BA914 | set_driver_version : bad input length
BAD_PARAM | 0x7C25BE | set_driver_version: driver version cannot be set twice
BAD_OP | 0x3446B1 | set_pp_rate_limit: failed to set rate limiter
BAD_PARAM | 0xA20B32 | create_lag: lag is not supported
BAD_PARAM | 0xD1A4F2 | create_lag: lag already enabled
BAD_PARAM | 0x104D28 | create_lag: lag is not supported
BAD_PARAM | 0x2B99BE | create_lag: bad .tx_remap_affinity_1
BAD_PARAM | 0x732893 | create_lag: bad .tx_remap_affinity_2
BAD_PARAM | 0x41552F | create_lag: lag already enabled or in progress by other
BAD_PARAM | 0x0D10E5 | modify_lag: only lag master can modify lag
BAD_PARAM | 0x2E73CF | modify_lag: bad field_select
BAD_PARAM | 0xDCF36A | modify_lag: bad .tx_remap_affinity_1
BAD_PARAM | 0x9F9DF7 | modify_lag: bad .tx_remap_affinity_2
BAD_OUTPUT_LEN | 0x9C8D49 | query_lag: bad output length
BAD_PARAM | 0x0E662B | destroy_lag: only lag master can destroy lag
BAD_PARAM | 0xE4AC33 | destroy_lag: not all qps/sq with port affinity closed
BAD_SYS_STATE | 0xA5AEE8 | destroy_lag: vport lag was not destroyed
BAD_OP | 0x2546EC | create_vport_lag: op_mod is reserved
BAD_PARAM | 0x3CF315 | create_vport_lag: this command is allowed only by the lag master
BAD_SYS_STATE | 0x7BB321 | create_vport_lag: vport lag already enabled
BAD_OP | 0x218399 | destroy_vport_lag: op_mod is reserved
BAD_PARAM | 0x33CAA1 | destroy_vport_lag: this command is allowed only by the lag master
BAD_SYS_STATE | 0x776AA1 | destroy_vport_lag: vport lag was not enabled
NO_RESOURCES | 0x2AAC7C | there will be no more pages
EXCEED_LIM | 0x23A840 | create_tir: fail to allocate tir number
EXCEED_LIM | 0x291839 | create_tir: fail to allocate tir steering entry
BAD_RESOURCE | 0x2EB6A4 | create/modify_tir: rqt doesn't exist
BAD_RESOURCE | 0x2EB6A5 | create/modify_tir: rq doesn't exist
BAD_RESOURCE | 0x25394B | create_tir: transport_domain doesn't exist
EXCEED_LIM | 0x0E350F | create_tir: fail to allocate tir lb_domain hash buckets
EXCEED_LIM | 0x13C6BA | create_tir: fail to allocate tir lb_domain steering entries according to transport_domain
BAD_PARAM | 0x40378C | modify_tir: currently only 32 bit bitmask is supported
EXCEED_LIM | 0x70B2D7 | modify_tir: fail to allocate tir lb_domain hash buckets
EXCEED_LIM | 0x1BF1DA | modify_tir: fail to allocate tir lb_domain steering entries according to transport_domain
BAD_PARAM | 0x1CB6A4 | modify_tir: rqt doesn't exist
BAD_RES_STATE | 0x29E5B3 | destroy_tir: tirn in use or doesn't exist
EXCEED_LIM | 0x69517D | create_tis: fail to allocate tis number
BAD_RESOURCE | 0x3A7839 | create_tis: transport_domain doesn't exist
BAD_OP | 0xAEB346 | modify_tis: command is valid only for ethernet port
BAD_INPUT_LEN | 0x492E95 | modify_tis: bad input length
BAD_PARAM | 0x374B62 | modify_tis: bad opcode modifier
BAD_PARAM | 0x99970D | modify_tis: bad modify_bitmask
BAD_PARAM | 0xEF6F97 | modify_tis: DEI_CFI bit is not supported in tis.prio
BAD_PARAM | 0x6612AA | modify_tis: lag_tx_port_affinity not suppoerted.
BAD_PARAM | 0x7761D9 | modify_tis: lag_tx_port_affinity supported only for lag master.
BAD_PARAM | 0x7BBA5E | create_tis: bad lag_tx_port_affinity
BAD_RES_STATE | 0x46311B | modify_tis: invalid tis number
BAD_PARAM | 0x4F51BF | modify_tis: strict_affinity cannot have lag_tx_port_affinity
BAD_RES_STATE | 0x6CB988 | destroy_tis: tisn in use or doesn't exist
EXCEED_LIM | 0x79A38E | alloc_encap: fail to allocate encap_id
BAD_INPUT_LEN | 0xB280BC | dealloc_encap: bad input length
BAD_RES_STATE | 0x179E84 | dealloc_encap: encap_id in use or doesn't exist
BAD_PARAM | 0x2F99BB | query_nic_vport_state: bad allowed_list_type
BAD_PARAM | 0x4B24FC | modify_nic_vport_state: RoCE can be disabled only after all RoCE QPs are destroyed
BAD_PARAM | 0x40EA03 | modify_nic_vport_context: min_wqe_inline_mode can be modified only before vport startup
BAD_PARAM | 0x36098E | modify_nic_vport_context: inline mode for any vport must be >= inline mode of e-sw vport group manager
BAD_PARAM | 0x6A2CAA | modify_nic_vport_state: bad allowed_list_type
BAD_PARAM | 0x019C02 | modify_nic_vport_state: bad allowed_list_size
BAD_OP | 0x427417 | query_roce_address: command is valid only for ethernet port
BAD_INDEX | 0x441CA6 | query_roce_address: roce_address_index not valid
EXCEED_LIM | 0x4BF0E8 | create_flow_table: failed to allocate flow_table resource number
BAD_RES_STATE | 0x21F03E | destroy_flow_group: flow_group in use or doesn't exist
EXCEED_LIM | 0x4E9008 | create_flow_group: failed to allocate flow_group resource number
EXCEED_LIM | 0x629511 | create_flow_group: failed to allocate flow_group rx fw resource
EXCEED_LIM | 0x629522 | create_flow_group: failed to allocate flow_group sx fw resource
EXCEED_LIM | 0x629533 | create_flow_group: failed to allocate flow_group vst fw resource
BAD_RES_STATE | 0x21F03B | destroy_flow_group: flow_group doesn't exist
BAD_OP | 0x3F4BF1 | alloc_flow_counter: command is valid only for ethernet port
BAD_OP | 0xF0101D | alloc_flow_counter: op_mod is reserved
EXCEED_LIM | 0x687239 | alloc_flow_counter: failed to allocate flow_counter resource number
BAD_OP | 0x43F4BF1| dealloc_flow_counter: command is valid only for ethernet port
BAD_OP | 0xE35BD3 | dealloc_flow_counter: op_mod is reserved
BAD_RES_STATE | 0x4BC68E | dealloc_flow_counter: flow_counter in use or doesn't exist
BAD_PARAM | 0x342AAE | delete_l2_table_entry: l2 table entry does not exist
BAD_PARAM | 0x244C6D | set_l2_table_entry: l2 table entry already exist
EXCEED_LIM | 0x552D36 | set_l2_table_entry: failed to allocate l2_table_entry resource number
BAD_PARAM | 0x669002 | query_l2_table_entry: l2 table entry does not exist
BAD_PARAM | 0x2031B1 | modify_vport_state: NIC_VPORT - bad vport state.
BAD_PARAM | 0x2936C3 | modify_vport_state: NIC_VPORT - bad vport_number
BAD_PARAM | 0x75CB3D | modify_vport_state: ESW_VPORT - bad vport state.
BAD_PARAM | 0x2936C2 | modify_vport_state: UP_LINK - bad vport_number
BAD_PARAM | 0x16CE03 | modify_vport_state: UP_LINK - bad vport state
BAD_PARAM | 0x83B703 | modify_vport_state: bad op_mod
BAD_OP | 0x379DB1 | query_vport_state: command is valid only for ethernet port
BAD_PARAM | 0x1B70BB | query_vport_state: bad op mod
BAD_PARAM | 0x519657 | create/modify_rqt: rqn doesn't exist or rqs have not uniform type
BAD_OP | 0x0A33C0 | create_rqt: command is valid only for ethernet port
EXCEED_LIM | 0x5DAF94 | create_rqt: fail to allocate fw_rqt_data number
EXCEED_LIM | 0x1C4BBA | create_rqt: fail to allocate fw rqt data number
EXCEED_LIM | 0x25E793 | create_rqt: fail to allocate rqt HW DATA ctx number
BAD_RESOURCE | 0x638B5F | create_rqt: rqtn is not valid
EXCEED_LIM | 0x1C4BBB | create_rqt: fail to allocate fw rqt data number
BAD_RES_STATE | 0x0BC68E | destroy_rqt: rqt in use or doesn't exist
BAD_RES_STATE | 0x2E49BD | query_rqt: rqt in use or doesn't exist
EXCEED_LIM | 0x5D5F94 | create_rq: failed to allocate resource number
EXCEED_LIM | 0x5A7935 | create_rq: failed to allocate qp resource number
BAD_PARAM | 0x2BF8B6 | create_rq: input_mailbox was illegally modified during process
BAD_RESOURCE | 0x2BF8A6 | create_rq: cqn doesn't exist
BAD_INPUT_LEN | 0x2F50CB | create_rq: not enough pas supplied to support buffer size
EXCEED_LIM | 0x76E357 | create_rq: failed to allocate mtt
BAD_PARAM | 0x5C129A | modify_rq: Limit water mark is higher then rq/srq size.
BAD_PARAM | 0x4A5E49 | modify_rq: Limit water mark is higher then rq/srq size.
EXCEED_LIM | 0x57CF9D | create_sq: failed to allocate resource_number number
BAD_RESOURCE | 0x4FDE71 | create_sq: s_cqn doesn't exist
BAD_RESOURCE | 0x65B501 | create_sq: maximum number of supported qps exceeded
BAD_RESOURCE | 0x2AE300 | create_sq command: tis number doesn't exist or exceed limit
BAD_INPUT_LEN | 0x2F40CA | create_sq: not enough pas supplied to support buffer size
EXCEED_LIM | 0x6CC43E | create_sq: failed to allocate mtt
BAD_RES_STATE | 0x52B76F | destroy_sq: sqn is not valid or in use
BAD_RES_STATE | 0x50B76F | destroy_rq: rqn is not valid or in use
EXCEED_LIM | 0x2B1A55 | add_vxlan_udp_dport: no free vxlan_udp_port field
BAD_PARAM | 0x3AD80C | delete_vxlan_udp_dport: vxlan_udp_port doesn't exist in gvmi
BAD_PARAM | 0x74D092 | delete_vxlan_udp_dport: vxlan_udp_port doesn't exist in device
BAD_OP | 0x08552F | alloc_transport_domain: bad op_mod
BAD_PARAM | 0x6CEF2E | alloc_transport_domain: transport_domain commands are not supported for port type ib
EXCEED_LIM | 0x095C93 | alloc_transport_domain: failed to allocate transport_domain resource number
BAD_OP | 0x76358C | dealloc_transport_domain: bad op_mod
BAD_PARAM | 0x86358C | dealloc_transport_domain: transport domain 0 is invalid
BAD_RES_STATE | 0x50E692 | dealloc_transport_domain: transport_domain number in use or doesn't exist
INTERNAL_ERR | 0x1CD2D5 | modify_cong_status: cannot read context from input.
INTERNAL_ERR | 0x56BD42 | query_cong_params:cannot write context to output.
INTERNAL_ERR | 0x55B1FD | query_cong_params:cannot write context to output.
INTERNAL_ERR | 0x3C506F | query_cong_counter:cannot write context to output.
BAD_PARAM | 0x68C713 | destroy_qp/dct: bad opcode modifier
BAD_INDEX | 0x398B0A | create_qp: failed to allocate resource_number number as requested number already allocated
EXCEED_LIM | 0x19C6D6 | create_qp: failed to allocate resource_number number (most likely out of resources)
BAD_RESOURCE | 0x2BF8A5 | create_qp: r_cqn doesn't exist
BAD_RESOURCE | 0x4FDF71 | create_qp: s_cqn doesn't exist
BAD_RESOURCE | 0x4A5F02 | qp command: srq number doesn't exist
BAD_RESOURCE | 0x65B500 | qp command: maximum number of supported qps exceeded
BAD_INPUT_LEN | 0x2F50CA | create qp: not enough pas supplied to support buffer size
EXCEED_LIM | 0x0BB3C2 | create_qp: failed to allocate mtt
EXCEED_LIM | 0x42A324 | create_dct: fail to allocate dct number
BAD_RESOURCE | 0x4CAF16 | create_dct: cq number doesn't exist
BAD_RESOURCE | 0x3B2998 | create_dct: srq number doesn't exist
BAD_PARAM | 0x41E870 | create_dct: dct.pd doesn't match srq.pd
BAD_PARAM | 0x2B6D28 | create_dct: dct.rlky doesn't match srq.rlky
BAD_INPUT_LEN | 0x25AC2E | init2init_qp: bad input length
BAD_PARAM | 0x4BCF21 | init2init_qp: bad opcode modifier
BAD_PARAM | 0x795921 | init2init_qp: opt_param_mask != 0
BAD_RES_STATE | 0x4287C3 | init2init_qp: invalid qp number.
BAD_QP_STATE | 0x0C7C8B | init2init_qp: qp is not in init state
BAD_INPUT_LEN | 0x7E7621 | init2rtr_qp: bad input length
BAD_PARAM | 0x0A88A8 | init2rtr_qp: bad opcode modifier
BAD_PARAM | 0x7016B9 | init2rtr_qp: bad opt_param_mask
BAD_RES_STATE | 0x5F34F6 | init2rtr_qp: invalid qp number.
BAD_QP_STATE | 0x5D668C | init2rtr_qp: qp is not in init state
BAD_RESOURCE | 0x31A762 | special_qp: cannot attach special QP, already attached
BAD_INPUT_LEN | 0x619154 | rtr2rts_qp: bad input length
BAD_PARAM | 0x6CBD32 | rtr2rts_qp: bad opcode modifier
BAD_PARAM | 0x07EC2C | rtr2rts_qp: bad opt_param_mask
BAD_RES_STATE | 0x4796B7 | rtr2rts_qp: invalid qp number.
BAD_QP_STATE | 0x429D76 | rtr2rts_qp: qp is not in rtr state
BAD_PARAM | 0x380F88 | rts2rts_qp: bad opcode modifier
BAD_PARAM | 0x498C8B | rts2rts_qp: bad opt_param_mask
BAD_PARAM | 0x1B5A69 | rts2rts_qp: change srqn is not supported in ISSI > 0.
BAD_INPUT_LEN | 0x330661 | rts2rts_qp: bad input length
BAD_RESOURCE | 0x2BF8A4 | rts2rts: r_cqn doesn't exist
BAD_RESOURCE | 0x7C839F | rts2rts_qp: srq number doesn't exist
BAD_RES_STATE | 0x0F4AF3 | rts2rts_qp: maibox was changed durring the command.
BAD_RES_STATE | 0x040841 | rts2rts_qp: maibox was changed durring the command.
BAD_RES_STATE | 0x71C9E5 | rts2rts_qp: maibox was changed durring the command.
BAD_RES_STATE | 0x08FD58 | rts2rts_qp: maibox was changed durring the command.
BAD_PARAM | 0x1B436A | rts2rts_qp: new src_addr_index illegal
BAD_PARAM | 0x1BCDE4 | rts2rts_qp: attempting to change eth_prio in ib port
BAD_RES_STATE | 0x56C36B | rts2rts_qp: invalid qp number.
BAD_QP_STATE | 0x0FC39F | rts2rts_qp: qp is not in RTS state.
BAD_RES_STATE | 0x4B4555 | rts2rts: eq buffer is full.
BAD_PARAM | 0x3F7B1C | 2error_qp/2reset/drain_dct: bad opcode modifier
BAD_RES_STATE | 0x7EA02D | 2error_qp/2reset/drain_dct: invalid qp/dct number.
BAD_INPUT_LEN | 0x42ED7C | sqerr2rts_qp/sqd2rts_qp: bad input length
BAD_PARAM | 0x1E674D | sqerr2rts_qp/sqd2rts_qp: bad opcode modifier
BAD_PARAM | 0x566AD3 | sqerr2rts_qp: bad opt_param_mask
BAD_PARAM | 0x0E5F93 | sqd2rts_qp: bad opt_param_mask
BAD_RES_STATE | 0x29653C | sqerr2rts_qp/sqd2rts_qp: invalid qp number.
BAD_QP_STATE | 0x0E3608 | sqerr2rts_qp: qp is not in sqerr state
BAD_QP_STATE | 0x3DD302 | sqd2rts_qp: qp is not in sqd state
BAD_PARAM | 0x31ED04 | create_flow_table: level0 ft for this table_type is already exist
NO_RESOURCES | 0x401239 | eth global steering table alloc fail 1
NO_RESOURCES | 0x71C1EB | eth global steering table alloc fail 2
NO_RESOURCES | 0x42EBCA | eth global steering table alloc fail 3
NO_RESOURCES | 0x201239 | eth global steering table alloc fail 4
NO_RESOURCES | 0x21C1EB | eth global steering table alloc fail 5
NO_RESOURCES | 0x22EBCA | eth global steering table alloc fail 6
NO_RESOURCES | 0x290D05 | eth global steering table alloc fail 7
NO_RESOURCES | 0x79C639 | eth global steering table alloc fail 8
NO_RESOURCES | 0x21435E | eth global steering table alloc fail 9
NO_RESOURCES | 0x3541E6 | eth global steering table alloc fail 10
NO_RESOURCES | 0x0AFFAE | eth global steering table alloc fail 11
NO_RESOURCES | 0x2FE7D9 | eth global steering table alloc fail 12
NO_RESOURCES | 0x2039BE | eth global steering table alloc fail 13
NO_RESOURCES | 0x53B84F | eth global steering table alloc fail 14
NO_RESOURCES | 0x23A0E6 | eth global steering table alloc fail 15
NO_RESOURCES | 0x79E69E | eth global steering table alloc fail 16
NO_RESOURCES | 0x6584C2 | eth global steering table alloc fail 17
NO_RESOURCES | 0x83B84F | eth global steering table alloc fail 18
NO_RESOURCES | 0x93B84F | eth global steering table alloc fail 19
NO_RESOURCES | 0x4CF024 | eth gvmi steering table alloc fail 1
NO_RESOURCES | 0x5CF024 | eth gvmi steering table alloc fail 2
NO_RESOURCES | 0x6CF024 | eth gvmi steering table alloc fail 3
NO_RESOURCES | 0x0AC92B | eth gvmi steering table alloc fail 5
NO_RESOURCES | 0x58900D | eth gvmi steering table alloc fail 6
NO_RESOURCES | 0x0B0CFD | eth gvmi steering table alloc fail 7
NO_RESOURCES | 0x33EA94 | eth gvmi steering table alloc fail 8
NO_RESOURCES | 0x1AC92B | eth gvmi steering table alloc fail 9
NO_RESOURCES | 0x18900D | eth gvmi steering table alloc fail 10
NO_RESOURCES | 0x1B0CFD | eth gvmi steering table alloc fail 11
NO_RESOURCES | 0x13EA94 | eth gvmi steering table alloc fail 12
BAD_PARAM | 0x1C2B78 | ft_test_and_update: invalid table_id
BAD_PARAM | 0x66CBBB | ft_test_and_update: table_id doesn't match table_type
BAD_PARAM | 0x66CDDD | ft_test_and_update: table_id doesn't exist for this vport_num
BAD_PARAM | 0x66D6C3 | destroy_flow_table: flow table still has attached groups
BAD_PARAM | 0x389E56 | destroy_flow_table: flow table still pointed by some flows
EXCEED_LIM | 0x0A1020 | create_flow_group: groups_member_count > table_size
BAD_RESOURCE | 0x3D1541 | set_flow_table_entry: tir doesn't exist;
EXCEED_LIM | 0x5D1541 | set_flow_table_entry: tir ref_count exceed limit
BAD_PARAM | 0x6D1541 | set_flow_table_entry: tir already pointed by some flow table with different table type
BAD_PARAM | 0x3178F5 | flow_group: flow_group doesn't exist (no such group_id for this table_id)
BAD_PARAM | 0x6D0ED4 | flow_group: flow_group doesn't exist (no such group_id for this table_type)
BAD_PARAM | 0x0F4A91 | set_flow_table_entry: flow_index < group start_flow_index
BAD_PARAM | 0x1DC7A3 | set_flow_table_entry: flow_index > group end_flow_index
BAD_PARAM | 0x3AD328 | set_flow_table_entry: rule include unmatched bits (group_match_criteria == 0, but fte_match_value == 1)
BAD_PARAM | 0x6588BF | set_flow_table_entry: source_sqn match can't be took together with external source_port match
BAD_PARAM | 0x78D8FE | set_flow_table_entry: an FTE with flow counter in FDB must has fully match on source_vport
BAD_PARAM | 0x29CDBA | set_flow_table_entry: an FTE with flow counter in FDB must has fully match on dmac
BAD_PARAM | 0x6E6D2A | set_flow_table_entry: an FTE with flow counter in FDB must has fully match on dmac
BAD_PARAM | 0x66010E | create_flow_group: invalid match_criteria_enable
BAD_PARAM | 0x7E1579 | create_flow_group: outer_headers valid bit isn't set, but headers are not reseved
BAD_PARAM | 0x7E1580 | create_flow_group: outer_headers valid bit is set, but headers are zero
BAD_PARAM | 0x0D37F4 | create_flow_group: misc_parameters valid bit isn't set, but headers are not reseved
BAD_PARAM | 0x0D37F5 | create_flow_group: misc_parameters valid bit is set, but headers are zero
BAD_PARAM | 0x17FAA8 | create_flow_group: inner_headers valid bit isn't set, but headers are not reseved
BAD_PARAM | 0x17FAA9 | create_flow_group: inner_headers valid bit is set, but headers are not zero
INTERNAL_ERR | 0x0FC8F3 | create_flow_group: unexpected invalid group in list
BAD_PARAM | 0x190DBD | create_flow_group: groups overlapping
BAD_PARAM | 0x7252AD | create_flow_group: groups overlapping
BAD_PARAM | 0x4FF308 | create_flow_group: group exceed flow table size
BAD_PARAM | 0x6AE84C | flow_table: destination table is in illegal level
BAD_PARAM | 0x6AE95D | flow_table: dest_list_size > 1, but dest_ft_level < 64
BAD_PARAM | 0x6AEA6E | flow_table: dest_list_size > 1, but src_ft_level >= 64
BAD_PARAM | 0x44090E | set_flow_table_entry: invalid vport number
BAD_PARAM | 0x30B3AF | set_flow_table_entry: flow_counter_id is reserved
BAD_RES_STATE | 0x03DDBF | set_flow_table_entry: flow_counter doesn't exist
BAD_PARAM | 0x2B6490 | set_flow_table_entry: flow_table_type doesn't fit the flow_counter table type
BAD_PARAM | 0x5399D7 | set_flow_table_entry: source_port match doesn't fit the flow_counter source_port
BAD_PARAM | 0x734E02 | set_flow_table_entry: dmac match doesn't fit the flow_counter mac
BAD_PARAM | 0x3B6490 | set_flow_table_entry: flow_table_type doesn't fit the flow_counter table type
BAD_PARAM | 0x4C4A4A | set_flow_table_entry: destination list must be comprised of destinations of the same type
BAD_PARAM | 0x22A5AF | set_flow_table_entry: dest_type == VPORT is valid only for table_type == ESW_FDB
BAD_PARAM | 0x142AD1 | set_flow_table_entry: multiple processing paths of flow tables is supported only for table_type == NIC_RX
BAD_PARAM | 0x002C63 | set_flow_table_entry: dest_type == TIR is valid only for NIC RX and sniffer flow tables
BAD_PARAM | 0x06DBB6 | set_flow_table_entry: multiple TIR destinations allowed only for NIC RX Flow Table
BAD_PARAM | 0x7AEA6E | set_flow_table_entry: TIRs dest_list_size > 1, but src_ft_level >= 64
BAD_PARAM | 0x27DBA7 | set_flow_table_entry: invalid flow destination type
BAD_PARAM | 0x7BC3C1 | set_flow_table_entry: external port is duplicated in the FTE destination list
BAD_PARAM | 0x7BC3C0 | set_flow_table_entry: FW currently doesn't support flow counters together with flow_tag
BAD_PARAM | 0x7CD55A | set_flow_table_entry: an FTE with flow counter in FDB must has dest_type == VPORT
BAD_RES_STATE | 0x2036ED | set_flow_table_entry: flow_group doesn't exist, or exceed limit
BAD_RES_STATE | 0xD29096 | set_flow_table_entry: only encap to wire action is currently supported
BAD_RES_STATE | 0x54B97C | set_flow_table_entry: encap_id doesn't exist
BAD_RES_STATE | 0x247AAB | dmfs_modify_flow_table_entry: encap_id doesn't exist
EXCEED_LIM | 0x5369F3 | dmfs_icm_alloc: icm allocation failed
BAD_PARAM | 0x1CC302 | create_flow_group: DIP/SIP header is set , but ethertype isn't fully set
BAD_PARAM | 0x3F5A6F | create_flow_group: UDP and TCP headers are mutual exclusive
BAD_PARAM | 0x23A6BF | create_flow_group: source_port match is not allwoed for this table type
BAD_PARAM | 0x45A7BF | create_flow_group: source_port can not be partial matched
BAD_PARAM | 0x22204C | create_flow_group: source_sqn match is not allwoed for this table type
BAD_PARAM | 0x09F12D | create_flow_group: source_sqn can not be partial matched
BAD_PARAM | 0x731716 | create_flow_table_group: FW currently doesn't support second vlan headers
BAD_PARAM | 0x4F0146 | set_flow_table_entry: IP version is IPv4, but dst_ip_127_32 isn't reserved
BAD_PARAM | 0x4C0856 | set_flow_table_entry: IP version is IPv4, but src_ip_127_32 isn't reserved
BAD_PARAM | 0x6013FA | set_flow_table_entry: invalid IP version ethertype
BAD_PARAM | 0x40D2AA | set_flow_table_entry: cvlan_tag and svlan_tag are mutual exclusive
BAD_PARAM | 0x6742F8 | set_flow_table_entry: outer_second_cvlan_tag and outer_second_svlan_tag are mutual exclusive
BAD_PARAM | 0x06F490 | set_flow_table_entry: inner_second_cvlan_tag and inner_second_svlan_tag are mutual exclusive
BAD_PARAM | 0x0EF281 | isr_perf_counters: The gvmi is not active
BAD_PARAM | 0x0CCF50 | PTYS: width 1X bit can't be cleared
BAD_PARAM | 0x166B61 | PTYS: Trying to set ib_proto_admin to a speed which is not supported.
BAD_PARAM | 0x103B92 | PTYS_write: Trying to set eth_proto_admin to a speed which is not supported.
BAD_PARAM | 0xBD59A0 | PTYS_write: wrong use of autonego disable, only single speed allowed when auto-neg is disabled
BAD_PARAM | 0x3123FD | bad PAS - reserved not zero (just for mtts. 0xfff)
BAD_PARAM | 0x3123FE | bad PAS - reserved not zero (just for mtts. 0xfff)
BAD_PARAM | 0x2BE9CB | get_icm_resource_attributes: unsupported counter id
BAD_RES_STATE | 0x6DA775 | manage_pages: bad hca state (enable hca is needed).
BAD_RES_STATE | 0x658908 | enable_hca: initializing
BAD_RES_STATE | 0x747414 | enable_hca: HOST0 driver must be loaded first.
BAD_RES_STATE | 0x083FCD | enable_hca: driver (hypervisor) refuesed to give pages.
BAD_RES_STATE | 0x2F4115 | enable_hca: PF event eq hasn't been set.
BAD_RES_STATE | 0x1B2028 | enable_hca: PF eq error.
BAD_RES_STATE | 0x511EFC | enable_hca: HCA already enabled.
BAD_RES_STATE | 0x54442A | disable_hca: PF event eq hasn't been mapped or fatal EQ problem
BAD_RES_STATE | 0x54667C | disable_hca: PF event eq hasn't been mapped or fatal EQ problem
BAD_RES_STATE | 0x70227F | disable hca: bad hca state.
BAD_RES_STATE | 0xA38764 | query_pages: bad op_mod, boot pages is required.
BAD_PARAM | 0x7EEC68 | query_pages: bad op_mod
BAD_OUTPUT_LEN | 0x4D99EF | query_issi: bad output length
BAD_PARAM | 0x7A7D3C | set issi: bad issi - not supported
BAD_PARAM | 0x2EDABC | set issi: bad issi - not supported
BAD_PARAM | 0x20BA9B | set issi: issi can be set just after enable hca.
BAD_RES_STATE | 0x7F88B6 | enable_hca cannot access other functions before init hca
BAD_RES_STATE | 0x7E89B1 | disable_hca cannot access other functions before init hca
BAD_RES_STATE | 0x59A763 | query_pages: hca is not enabled
BAD_PARAM | 0x5468FA | manage_pages: pages are not required
BAD_SYS_STATE | 0x2B69B6 | bad opcode (not supported before init hca)
BAD_SYS_STATE | 0x408B33 | bad opcode + hca state (HCA disabled or did not get all required pages)
NO_RESOURCES | 0x632A50 | init_hca: icm context initialization error (reserved_contexts)
NO_RESOURCES | 0x28E7D8 | init_hca: icm context initialization error (dc)
NO_RESOURCES | 0x7B7A29 | init_hca called without enough pages to complete operation
NO_RESOURCES | 0x5B3CF2 | init_hca called without enough pages to complete operation
BAD_SYS_STATE | 0x133D1B | init_hca: gvmi already initialized
BAD_RES_STATE | 0x448829 | teardown_hca: not all dcts are closed
BAD_SYS_STATE | 0x398A88 | gvmi not active
NO_RESOURCES | 0x4F8492 | global steering table alloc fail 1
NO_RESOURCES | 0x5F8492 | global steering table alloc fail 2
NO_RESOURCES | 0x4C37AC | ib global steering table alloc fail 3
NO_RESOURCES | 0x3EFDDC | ib global steering table alloc fail 4
NO_RESOURCES | 0x4BFE48 | ib global steering table alloc fail 5
NO_RESOURCES | 0x6CDFC0 | ib gvmi steering table alloc fail 1
NO_RESOURCES | 0x314248 | ib gvmi steering table alloc fail 2
NO_RESOURCES | 0x498A88 | ib gvmi steering table alloc fail 3
BAD_RES_STATE | 0x42D2BF | attach_to_mcg: qp already exists in mcg
EXCEED_LIM | 0x44D596 | attach_to_mcg: mcg already has maximum qps
BAD_RES_STATE | 0x53EC1C | detach_from_mcg: mcg doesn't exist
BAD_RES_STATE | 0x756DB1 | detach_from_mcg: mcg doesn't exist in this gvmi
BAD_RES_STATE | 0x580CF2 | detach_from_mcg: qp doesn't exist in mcg
EXCEED_LIM | 0x6466E3 | attach_detach_from_mcg: steering icm entries exhausted
EXCEED_LIM | 0x7466E3 | attach_detach_from_mcg: steering icm entries exhausted
BAD_OP | 0x2FB682 | sniffer: only port_pf_gvmi can use sniffer
BAD_RES_STATE | 0x1FB682 | sniffer: attach while attached
BAD_RES_STATE | 0x7E8862 | sniffer: detach while not attached
BAD_RESOURCE | 0x15A3C9 | qp command: can not open RoCE QP if vport roce_en == 0
@lukego
Copy link
Author

lukego commented Aug 24, 2023

Sorry, don't have any updates.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment