Created
May 12, 2021 14:15
-
-
Save lumbric/bfbae4b967123428ec41e423193f3fbd to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
root@ourserver:/home/myuser# smartctl -a /dev/sdf | |
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-72-generic] (local build) | |
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Device Model: TOSHIBA HDWR180 | |
Serial Number: 8040A00MFB5G | |
LU WWN Device Id: 5 000039 a58c92ad9 | |
Firmware Version: 0603 | |
User Capacity: 8,001,563,222,016 bytes [8.00 TB] | |
Sector Sizes: 512 bytes logical, 4096 bytes physical | |
Rotation Rate: 7200 rpm | |
Form Factor: 3.5 inches | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: ACS-3 T13/2161-D revision 5 | |
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Tue May 11 14:29:15 2021 CEST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
See vendor-specific Attribute list for marginal Attributes. | |
General SMART Values: | |
Offline data collection status: (0x84) Offline data collection activity | |
was suspended by an interrupting command from host. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 73) The previous self-test completed having | |
a test element that failed and the test | |
element that failed is not known. | |
Total time to complete Offline | |
data collection: ( 120) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 834) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 | |
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8155 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1 | |
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x000b 100 001 050 Pre-fail Always In_the_past 0 | |
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 979 | |
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1 | |
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0 | |
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 181 | |
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 45 (Min/Max 27/46) | |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 100925465 | |
222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 511 | |
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 523 | |
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
SMART Error Log Version: 1 | |
ATA Error Count: 1 | |
CR = Command Register [HEX] | |
FR = Features Register [HEX] | |
SC = Sector Count Register [HEX] | |
SN = Sector Number Register [HEX] | |
CL = Cylinder Low Register [HEX] | |
CH = Cylinder High Register [HEX] | |
DH = Device/Head Register [HEX] | |
DC = Device Command Register [HEX] | |
ER = Error register [HEX] | |
ST = Status register [HEX] | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 1 occurred at disk power-on lifetime: 973 hours (40 days + 13 hours) | |
When the command that caused the error occurred, the device was doing SMART Offline or Self-test. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
04 53 00 90 f4 2c 02 Error: ABRT | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
b0 d4 00 81 4f c2 00 00 40d+13:30:07.895 SMART EXECUTE OFF-LINE IMMEDIATE | |
b0 d0 01 00 4f c2 00 00 40d+13:30:07.893 SMART READ DATA | |
ec 00 01 00 00 00 00 00 40d+13:30:07.886 IDENTIFY DEVICE | |
ec 00 01 00 00 00 00 00 40d+13:30:07.885 IDENTIFY DEVICE | |
ea 00 00 00 00 00 a0 00 40d+13:30:04.242 FLUSH CACHE EXT | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Short offline Completed: unknown failure 90% 973 0 | |
# 2 Short offline Completed: unknown failure 90% 973 0 | |
# 3 Short offline Completed: unknown failure 90% 973 0 | |
# 4 Short captive Completed: unknown failure 90% 973 0 | |
# 5 Short offline Completed: unknown failure 90% 973 0 | |
# 6 Short offline Completed: unknown failure 90% 952 0 | |
# 7 Short offline Completed: unknown failure 90% 951 0 | |
# 8 Short offline Completed: unknown failure 90% 951 0 | |
# 9 Short offline Completed: unknown failure 90% 951 0 | |
#10 Short offline Completed: unknown failure 10% 951 0 | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment