Created
August 3, 2023 22:54
-
-
Save lupyuen/030e4feb2fa95319290f3027032c24a8 to your computer and use it in GitHub Desktop.
Star64 JH7110 booting sdcard.img from https://github.com/starfive-tech/VisionFive2/releases
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2021.10 (Jan 19 2023 - 04:09:41 +0800) | |
| DDR version: dc2e84f0. | |
| Trying to boot from SPI | |
| OpenSBI v1.2 | |
| ____ _____ ____ _____ | |
| / __ \ / ____| _ \_ _| | |
| | | | |_ __ ___ _ __ | (___ | |_) || | | |
| | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |
| | |__| | |_) | __/ | | |____) | |_) || |_ | |
| \____/| .__/ \___|_| |_|_____/|____/_____| | |
| | | | |
| |_| | |
| Platform Name : StarFive VisionFive V2 | |
| Platform Features : medeleg | |
| Platform HART Count : 5 | |
| Platform IPI Device : aclint-mswi | |
| Platform Timer Device : aclint-mtimer @ 4000000Hz | |
| Platform Console Device : uart8250 | |
| Platform HSM Device : jh7110-hsm | |
| Platform PMU Device : --- | |
| Platform Reboot Device : pm-reset | |
| Platform Shutdown Device : pm-reset | |
| Firmware Base : 0x40000000 | |
| Firmware Size : 288 KB | |
| Runtime SBI Version : 1.0 | |
| Domain0 Name : root | |
| Domain0 Boot HART : 1 | |
| Domain0 HARTs : 0*,1*,2*,3*,4* | |
| Domain0 Region00 : 0x0000000002000000-0x000000000200ffff (I) | |
| Domain0 Region01 : 0x0000000040000000-0x000000004007ffff () | |
| Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X) | |
| Domain0 Next Address : 0x0000000040200000 | |
| Domain0 Next Arg1 : 0x0000000042200000 | |
| Domain0 Next Mode : S-mode | |
| Domain0 SysReset : yes | |
| Boot HART ID : 1 | |
| Boot HART Domain : root | |
| Boot HART Priv Version : v1.11 | |
| Boot HART Base ISA : rv64imafdcbx | |
| Boot HART ISA Extensions : none | |
| Boot HART PMP Count : 8 | |
| Boot HART PMP Granularity : 4096 | |
| Boot HART PMP Address Bits: 34 | |
| Boot HART MHPM Count : 2 | |
| Boot HART MIDELEG : 0x0000000000000222 | |
| Boot HART MEDELEG : 0x000000000000b109 | |
| U-Boot 2021.10 (Jan 19 2023 - 04:09:41 +0800), Build: jenkins-github_visionfive2-6 | |
| CPU: rv64imacu | |
| Model: StarFive VisionFive V2 | |
| DRAM: 8 GiB | |
| MMC: sdio0@16010000: 0, sdio1@16020000: 1 | |
| Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| OK | |
| StarFive EEPROM format v2 | |
| --------EEPROM INFO-------- | |
| Vendor : PINE64 | |
| Product full SN: STAR64V1-2310-D008E000-00000003 | |
| data version: 0x2 | |
| PCB revision: 0xc1 | |
| BOM revision: A | |
| Ethernet MAC0 address: 6c:cf:39:00:75:5d | |
| Ethernet MAC1 address: 6c:cf:39:00:75:5e | |
| --------EEPROM INFO-------- | |
| In: serial@10000000 | |
| Out: serial@10000000 | |
| Err: serial@10000000 | |
| Model: StarFive VisionFive V2 | |
| Net: eth0: ethernet@16030000, eth1: ethernet@16040000 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| found device 1 | |
| bootmode flash device 1 | |
| Failed to load 'uEnv.txt' | |
| Can't set block device | |
| Hit any key to stop autoboot: 0 | |
| 1579 bytes read in 4 ms (384.8 KiB/s) | |
| Importing environment from mmc1 ... | |
| Can't set block device | |
| ## Warning: defaulting to text format | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| 134204526 bytes read in 5673 ms (22.6 MiB/s) | |
| ## Loading kernel from FIT Image at a0000000 ... | |
| Using 'config-1' configuration | |
| Trying 'vmlinux' kernel subimage | |
| Description: vmlinux | |
| Type: Kernel Image | |
| Compression: uncompressed | |
| Data Start: 0xa00000c8 | |
| Data Size: 24161280 Bytes = 23 MiB | |
| Architecture: RISC-V | |
| OS: Linux | |
| Load Address: 0x40200000 | |
| Entry Point: 0x40200000 | |
| Verifying Hash Integrity ... OK | |
| ## Loading fdt from FIT Image at a0000000 ... | |
| Using 'config-1' configuration | |
| Trying 'fdt' fdt subimage | |
| Description: unavailable | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0xa7ff02e0 | |
| Data Size: 50235 Bytes = 49.1 KiB | |
| Architecture: RISC-V | |
| Load Address: 0x46000000 | |
| Hash algo: sha256 | |
| Hash value: 42767c996f0544f513280805b41f996446df8b3956c656bdbb782125ae8ffeec | |
| Verifying Hash Integrity ... sha256+ OK | |
| Loading fdt from 0xa7ff02e0 to 0x46000000 | |
| Booting using the fdt blob at 0x46000000 | |
| ## Loading loadables from FIT Image at a0000000 ... | |
| Trying 'ramdisk' loadables subimage | |
| Description: buildroot initramfs | |
| Type: RAMDisk Image | |
| Compression: uncompressed | |
| Data Start: 0xa170ad7c | |
| Data Size: 109991061 Bytes = 104.9 MiB | |
| Architecture: RISC-V | |
| OS: Linux | |
| Load Address: 0x46100000 | |
| Entry Point: unavailable | |
| Hash algo: sha256 | |
| Hash value: 5ff3e7a7bdc444d817328f86356c3b4f9d0690a102cb960b0975edd90ecd379e | |
| Verifying Hash Integrity ... sha256+ OK | |
| Loading loadables from 0xa170ad7c to 0x46100000 | |
| Loading Kernel Image | |
| ## Error: "cpu_vol_set" not defined | |
| Booting kernel in | |
| ## Flattened Device Tree blob at 46000000 | |
| Booting using the fdt blob at 0x46000000 | |
| Using Device Tree in place at 0000000046000000, end 000000004600ffff | |
| Starting kernel ... | |
| clk u5_dw_i2c_clk_core already disabled | |
| clk u5_dw_i2c_clk_apb already disabled | |
| [ 0.000000] Linux version 5.15.0 (jenkins@soft05) (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot VF2_v3.1.5) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Wed Jun 21 13:42:06 CST 2023 | |
| [ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000 | |
| [ 0.000000] Machine model: StarFive VisionFive V2 | |
| [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') | |
| [ 0.000000] printk: bootconsole [sbi0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 512 MiB | |
| [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000040200000-0x00000000ffffffff] | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000c010ffff] | |
| [ 0.000000] node 0: [mem 0x00000000c0110000-0x00000000c01fffff] | |
| [ 0.000000] node 0: [mem 0x00000000c0200000-0x000000023fffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000023fffffff] | |
| [ 0.000000] SBI specification v1.0 detected | |
| [ 0.000000] SBI implementation ID=0x1 Version=0x10002 | |
| [ 0.000000] SBI TIME extension detected | |
| [ 0.000000] SBI IPI extension detected | |
| [ 0.000000] SBI RFENCE extension detected | |
| [ 0.000000] SBI SRST extension detected | |
| [ 0.000000] SBI v0.2 HSM extension detected | |
| [ 0.000000] CPU with hartid=0 is not available | |
| [ 0.000000] CPU with hartid=0 is not available | |
| [ 0.000000] riscv: base ISA extensions acdfim | |
| [ 0.000000] riscv: ELF capabilities acdfim | |
| [ 0.000000] percpu: Embedded 18 pages/cpu s34024 r8192 d31512 u73728 | |
| [ 0.000000] pcpu-alloc: s34024 r8192 d31512 u73728 alloc=18*4096 | |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2067975 | |
| [ 0.000000] Kernel command line: earlyprintk console=tty1 console=ttyS0,115200 debug rootwait earlycon=sbi root=/dev/mmcblk1p4 | |
| [ 0.000000] Unknown command line parameters: earlyprintk | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:byref_all(zero), heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) | |
| [ 0.000000] Memory: 7458480K/8386560K available (10537K kernel code, 5013K rwdata, 4096K rodata, 2197K init, 666K bss, 403792K reserved, 524288K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] rcu: .RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. | |
| [ 0.000000] rcu: .RCU debug extended QS entry/exit. | |
| [ 0.000000] .Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] CPU with hartid=0 is not available | |
| [ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller | |
| [ 0.000000] riscv-intc: 64 local interrupts mapped | |
| [ 0.000000] plic: plic@c000000: mapped 136 interrupts with 4 handlers for 9 contexts. | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x4d0/0x6ea with crng_init=0 | |
| [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1] | |
| [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns | |
| [ 0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns | |
| [ 0.008246] clocksource: timer@13050000.ch0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
| [ 0.018470] clocksource: timer@13050000.ch1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
| [ 0.028785] clocksource: timer@13050000.ch2: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
| [ 0.039099] clocksource: timer@13050000.ch3: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
| [ 0.049625] Console: colour dummy device 80x25 | |
| [ 0.055386] printk: console [tty1] enabled | |
| [ 0.059440] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=40000) | |
| [ 0.069645] pid_max: default: 32768 minimum: 301 | |
| [ 0.074575] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.082259] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.091692] ASID allocator disabled | |
| [ 0.095225] rcu: Hierarchical SRCU implementation. | |
| [ 0.100147] EFI services will not be available. | |
| [ 0.104997] smp: Bringing up secondary CPUs ... | |
| [ 0.111138] smp: Brought up 1 node, 4 CPUs | |
| [ 0.117058] devtmpfs: initialized | |
| [ 0.129018] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.138826] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.159311] pinctrl core: initialized pinctrl subsystem | |
| [ 0.165412] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.171920] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.172279] cpuidle: using governor menu | |
| [ 0.206167] platform soc:dsi-output: Fixing up cyclic dependency with 29400000.dc8200 | |
| [ 0.214517] platform 295d0000.mipi: Fixing up cyclic dependency with soc:dsi-output | |
| [ 0.222549] platform 29590000.hdmi: Fixing up cyclic dependency with 29400000.dc8200 | |
| [ 0.243182] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.249822] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.260327] vgaarb: loaded | |
| [ 0.263220] SCSI subsystem initialized | |
| [ 0.267069] libata version 3.00 loaded. | |
| [ 0.271009] usbcore: registered new interface driver usbfs | |
| [ 0.276465] usbcore: registered new interface driver hub | |
| [ 0.281850] usbcore: registered new device driver usb | |
| [ 0.287156] mc: Linux media interface: v0.10 | |
| [ 0.291375] videodev: Linux video capture interface: v2.00 | |
| [ 0.297203] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.303629] Bluetooth: Core ver 2.22 | |
| [ 0.307169] NET: Registered PF_BLUETOOTH protocol family | |
| [ 0.312508] Bluetooth: HCI device and connection manager initialized | |
| [ 0.318936] Bluetooth: HCI socket layer initialized | |
| [ 0.323867] Bluetooth: L2CAP socket layer initialized | |
| [ 0.328994] Bluetooth: SCO socket layer initialized | |
| [ 0.334245] clocksource: Switched to clocksource riscv_clocksource | |
| [ 0.340622] FS-Cache: Loaded | |
| [ 0.350854] NET: Registered PF_INET protocol family | |
| [ 0.356903] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.372015] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear) | |
| [ 0.380830] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.389525] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 0.399400] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.406176] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear) | |
| [ 0.413328] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear) | |
| [ 0.421078] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.427244] RPC: Registered named UNIX socket transport module. | |
| [ 0.433102] RPC: Registered udp transport module. | |
| [ 0.437887] RPC: Registered tcp transport module. | |
| [ 0.442633] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.449873] PCI: CLS 0 bytes, default 64 | |
| [ 0.454501] Unpacking initramfs... | |
| [ 0.454743] Initialise system trusted keyrings | |
| [ 0.462533] workingset: timestamp_bits=62 max_order=21 bucket_order=0 | |
| [ 0.475713] NFS: Registering the id_resolver key type | |
| [ 0.480723] Key type id_resolver registered | |
| [ 0.484977] Key type id_legacy registered | |
| [ 0.489128] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.495803] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.503281] ntfs: driver 2.1.32 [Flags: R/W]. | |
| [ 0.507960] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
| [ 0.514485] fuse: init (API version 7.34) | |
| [ 0.557351] NET: Registered PF_ALG protocol family | |
| [ 0.562105] Key type asymmetric registered | |
| [ 0.566302] Asymmetric key parser 'x509' registered | |
| [ 0.571286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) | |
| [ 0.578688] io scheduler mq-deadline registered | |
| [ 0.583236] io scheduler kyber registered | |
| [ 0.587889] start plist test | |
| [ 0.593832] end plist test | |
| [ 0.696325] clk-starfive-jh7110 13020000.clock-controller: starfive JH7110 clkgen init successfully. | |
| [ 0.706805] L2CACHE: DataError @ 0x00000000.08040140 | |
| [ 0.711770] L2CACHE: DataFail @ 0x00000000.0804005B | |
| [ 0.716756] L2CACHE: No. of Banks in the cache: 8 | |
| [ 0.721422] L2CACHE: No. of ways per bank: 16 | |
| [ 0.725861] L2CACHE: Sets per bank: 256 | |
| [ 0.729741] L2CACHE: Bytes per cache block: 64 | |
| [ 0.734263] L2CACHE: Index of the largest way enabled: 15 | |
| [ 0.740038] jh7110-pmu 17030000.power-controller: registered 8 power domains | |
| [ 0.812356] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled | |
| [ 0.833122] loop: module loaded | |
| [ 0.838957] spi-nor spi0.0: gd25lq128d (16384 Kbytes) | |
| [ 6.080343] Initramfs unpacking failed: invalid magic at start of compressed archive | |
| [ 6.283510] Freeing initrd memory: 131056K | |
| [ 6.298195] 3 fixed-partitions partitions found on MTD device 13010000.spi.0 | |
| [ 6.305240] Creating 3 MTD partitions on "13010000.spi.0": | |
| [ 6.310750] 0x000000000000-0x000000040000 : "spl" | |
| [ 6.317425] 0x000000100000-0x000000400000 : "uboot" | |
| [ 6.323889] 0x000000f00000-0x000001000000 : "data" | |
| [ 6.331515] libphy: Fixed MDIO Bus: probed | |
| [ 6.337092] CAN device driver interface | |
| [ 6.341480] starfive-eth-plat 16030000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set. | |
| [ 6.351865] starfive-eth-plat 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52 | |
| [ 6.359319] starfive-eth-plat 16030000.ethernet: .DWMAC4/5 | |
| [ 6.364846] starfive-eth-plat 16030000.ethernet: DMA HW capability register supported | |
| [ 6.372728] starfive-eth-plat 16030000.ethernet: RX Checksum Offload Engine supported | |
| [ 6.380625] starfive-eth-plat 16030000.ethernet: Wake-Up On Lan supported | |
| [ 6.387533] starfive-eth-plat 16030000.ethernet: TSO supported | |
| [ 6.393346] starfive-eth-plat 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
| [ 6.401775] starfive-eth-plat 16030000.ethernet: Enabled Flow TC (entries=1) | |
| [ 6.408872] starfive-eth-plat 16030000.ethernet: TSO feature enabled | |
| [ 6.415284] starfive-eth-plat 16030000.ethernet: Using 40 bits DMA width | |
| [ 6.663647] libphy: stmmac: probed | |
| [ 6.667034] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) | |
| [ 6.676988] YT8531 Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) | |
| [ 6.688209] starfive-eth-plat 16040000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set. | |
| [ 6.698534] starfive-eth-plat 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52 | |
| [ 6.705989] starfive-eth-plat 16040000.ethernet: .DWMAC4/5 | |
| [ 6.711502] starfive-eth-plat 16040000.ethernet: DMA HW capability register supported | |
| [ 6.719411] starfive-eth-plat 16040000.ethernet: RX Checksum Offload Engine supported | |
| [ 6.727297] starfive-eth-plat 16040000.ethernet: Wake-Up On Lan supported | |
| [ 6.734192] starfive-eth-plat 16040000.ethernet: TSO supported | |
| [ 6.740031] starfive-eth-plat 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer | |
| [ 6.748449] starfive-eth-plat 16040000.ethernet: Enabled Flow TC (entries=1) | |
| [ 6.755544] starfive-eth-plat 16040000.ethernet: TSO feature enabled | |
| [ 6.761941] starfive-eth-plat 16040000.ethernet: Using 40 bits DMA width | |
| [ 7.009960] libphy: stmmac: probed | |
| [ 7.013313] YT8531 Gigabit Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL) | |
| [ 7.023315] YT8531 Gigabit Ethernet stmmac-1:01: attached PHY driver (mii_bus:phy_addr=stmmac-1:01, irq=POLL) | |
| [ 7.034885] Intel(R) Wireless WiFi driver for Linux | |
| [ 7.042151] cdns3-starfive 10210000.usbdrd: usb mode 2 2.0 probe success | |
| [ 7.049671] usbcore: registered new interface driver uas | |
| [ 7.054996] usbcore: registered new interface driver usb-storage | |
| [ 7.074704] starfive-rtc 17040000.rtc: registered as rtc0 | |
| [ 7.080055] starfive-rtc 17040000.rtc: setting system clock to 2001-01-01T00:00:00 UTC (978307200) | |
| [ 7.089225] i2c_dev: i2c /dev entries driver | |
| [ 7.094009] usbcore: registered new interface driver uvcvideo | |
| [ 7.114274] thermal thermal_zone0: failed to read out thermal zone (-110) | |
| [ 7.121715] starfive-wdt 13070000.wdog: Heartbeat: timeout=15, count/2=180000000 (0aba9500) | |
| [ 7.130586] Bluetooth: HCI UART driver ver 2.3 | |
| [ 7.134996] Bluetooth: HCI UART protocol H4 registered | |
| [ 7.140893] sdhci: Secure Digital Host Controller Interface driver | |
| [ 7.147051] sdhci: Copyright(c) Pierre Ossman | |
| [ 7.151473] Synopsys Designware Multimedia Card Interface Driver | |
| [ 7.157869] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 7.164717] jh7110-sec 16000000.crypto: Unable to request sec_m dma channel in DMA channel | |
| [ 7.172939] jh7110-sec 16000000.crypto: Cannot initial dma chan | |
| [ 7.179222] usbcore: registered new interface driver usbhid | |
| [ 7.184766] usbhid: USB HID core driver | |
| [ 7.188850] riscv-pmu-sbi: SBI PMU extension is available | |
| [ 7.194208] riscv-pmu-sbi: 16 firmware and 4 hardware counters | |
| [ 7.200080] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available | |
| [ 7.209908] usbcore: registered new interface driver snd-usb-audio | |
| [ 7.225164] NET: Registered PF_INET6 protocol family | |
| [ 7.231399] Segment Routing with IPv6 | |
| [ 7.235066] In-situ OAM (IOAM) with IPv6 | |
| [ 7.239105] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
| [ 7.245613] NET: Registered PF_PACKET protocol family | |
| [ 7.250614] can: controller area network core | |
| [ 7.255130] NET: Registered PF_CAN protocol family | |
| [ 7.259879] can: raw protocol | |
| [ 7.262912] can: broadcast manager protocol | |
| [ 7.267181] can: netlink gateway - max_hops=1 | |
| [ 7.271860] Bluetooth: RFCOMM TTY layer initialized | |
| [ 7.276719] Bluetooth: RFCOMM socket layer initialized | |
| [ 7.281905] Bluetooth: RFCOMM ver 1.11 | |
| [ 7.285722] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| [ 7.291070] Bluetooth: BNEP filters: protocol multicast | |
| [ 7.296373] Bluetooth: BNEP socket layer initialized | |
| [ 7.301440] lib80211: common routines for IEEE802.11 drivers | |
| [ 7.307122] lib80211_crypt: registered algorithm 'NULL' | |
| [ 7.312391] lib80211_crypt: registered algorithm 'WEP' | |
| [ 7.317602] lib80211_crypt: registered algorithm 'CCMP' | |
| [ 7.322878] lib80211_crypt: registered algorithm 'TKIP' | |
| [ 7.328308] 9pnet: Installing 9P2000 support | |
| [ 7.332579] Key type dns_resolver registered | |
| [ 7.337699] Loading compiled-in X.509 certificates | |
| [ 7.381919] @@ dev ptr:ffffffe0bfefe800/1500/1 | |
| [ 7.386589] PVR_K: 1: Read BVNC 36.50.54.182 from HW device registers | |
| [ 7.393118] PVR_K: 1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system | |
| [ 7.407665] PVR_K: 1: RGX Firmware image 'rgx.fw.36.50.54.182' loaded | |
| [ 7.418035] PVR_K: 1: Shader binary image 'rgx.sh.36.50.54.182' loaded | |
| [ 7.427543] [drm] Initialized pvr 1.19.6345021 20170530 for 18000000.gpu on minor 0 | |
| [ 7.436226] starfive_jh7110-pinctrl 13040000.gpio: StarFive GPIO chip registered 64 GPIOs | |
| [ 7.445145] starfive_jh7110-pinctrl 17020000.gpio: StarFive GPIO chip registered 4 GPIOs | |
| [ 7.453392] pl08xdmac 16008000.sec_dma: initialized 8 virtual memcpy channels | |
| [ 7.460519] pl08xdmac 16008000.sec_dma: initialized 16 virtual slave channels | |
| [ 7.469592] debugfs: Directory '16008000.sec_dma' with parent 'dmaengine' already present! | |
| [ 7.477867] pl08xdmac 16008000.sec_dma: DMA: PL080 rev0 at 0x16008000 irq 23 | |
| [ 7.485205] ssp-pl022 10060000.spi: ARM PL022 driver for StarFive SoC platform, device ID: 0x00041022 | |
| [ 7.494410] ssp-pl022 10060000.spi: mapped registers from 0x0000000010060000 to (____ptrval____) | |
| [ 7.503688] ssp-pl022 10060000.spi: Requested frequency: 10000000 Hz is unsupported,select by default 8250000 Hz | |
| [ 7.514255] ssp-pl022 10060000.spi: will use autosuspend for runtime pm, delay 100ms | |
| [ 7.523358] i2c 2-0045: Fixing up cyclic dependency with 295d0000.mipi | |
| [ 7.530123] seeed_panel 2-0045: Unknown Atmel firmware revision: 0x00 | |
| [ 7.536747] tinker_ft5406 2-0038: Address = 0x38 | |
| [ 7.541299] tinker_ft5406 2-0038: width = 800, height = 480, reverse = 1 | |
| [ 7.548216] tinker_ft5406 2-0038: i2c read error, -121 | |
| [ 7.553295] tinker_ft5406 2-0038: Checking touch ic failed | |
| [ 7.558861] tinker_ft5406: probe of 2-0038 failed with error -121 | |
| [ 7.565216] i2c 2-0019: Fixing up cyclic dependency with 295d0000.mipi | |
| [ 7.572617] Goodix-TS 2-0014: supply AVDD28 not found, using dummy regulator | |
| [ 7.579749] Goodix-TS 2-0014: supply VDDIO not found, using dummy regulator | |
| [ 7.704402] Goodix-TS 2-0014: i2c test failed attempt 1: -121 | |
| [ 7.744401] Goodix-TS 2-0014: i2c test failed attempt 2: -121 | |
| [ 7.784267] Goodix-TS 2-0014: I2C communication failure: -121 | |
| [ 7.790124] Goodix-TS: probe of 2-0014 failed with error -121 | |
| [ 7.796045] i2c 2-0020: Fixing up cyclic dependency with 295d0000.mipi | |
| [ 7.803816] at24 5-0050: supply vcc not found, using dummy regulator | |
| [ 7.810971] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write | |
| [ 7.819714] axp15060-regulator 5-0036: Register mipi_0p9 done! vol range:900 ~ 900 mV | |
| [ 7.829000] axp15060-regulator 5-0036: Register hdmi_1p8 done! vol range:1800 ~ 1800 mV | |
| [ 7.838509] axp15060-regulator 5-0036: Register sdio_vdd done! vol range:1800 ~ 1800 mV | |
| [ 7.847977] axp15060-regulator 5-0036: Register hdmi_0p9 done! vol range:900 ~ 900 mV | |
| [ 7.857274] axp15060-regulator 5-0036: Register vcc_3v3 done! vol range:3300 ~ 3300 mV | |
| [ 7.866681] axp15060-regulator 5-0036: Register cpu_vdd done! vol range:500 ~ 1540 mV | |
| [ 7.875306] i2c 6-0010: Fixing up cyclic dependency with 19800000.vin_sysctl | |
| [ 7.882678] imx219 6-0010: supply VANA not found, using dummy regulator | |
| [ 7.889387] imx219 6-0010: supply VDIG not found, using dummy regulator | |
| [ 7.896040] imx219 6-0010: supply VDDL not found, using dummy regulator | |
| [ 7.917341] imx219 6-0010: failed to read chip id 219 | |
| [ 7.922545] imx219: probe of 6-0010 failed with error -5 | |
| [ 7.928021] i2c 6-001a: Fixing up cyclic dependency with 19800000.vin_sysctl | |
| [ 7.935401] imx708 6-001a: supply VANA1 not found, using dummy regulator | |
| [ 7.942169] imx708 6-001a: supply VANA2 not found, using dummy regulator | |
| [ 7.948872] imx708 6-001a: supply VDIG not found, using dummy regulator | |
| [ 7.955572] imx708 6-001a: supply VDDL not found, using dummy regulator | |
| [ 7.971456] imx708 6-001a: failed to read chip id 708, with error -5 | |
| [ 7.978034] imx708: probe of 6-001a failed with error -5 | |
| [ 7.985951] pcie_plda 2b000000.pcie: Failed to get power-gpio, but maybe it's always on. | |
| [ 7.994162] pcie_plda 2b000000.pcie: host bridge /soc/pcie@2B000000 ranges: | |
| [ 8.001141] pcie_plda 2b000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000 | |
| [ 8.009263] pcie_plda 2b000000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000 | |
| [ 8.017446] ATR entry: 0x0940000000 -> 0x0000000000 [0x0010000000] (param: 0x000001) | |
| [ 8.025196] ATR entry: 0x0030000000 -> 0x0030000000 [0x0008000000] (param: 0x000000) | |
| [ 8.032978] ATR entry: 0x0900000000 -> 0x0900000000 [0x0040000000] (param: 0x000000) | |
| [ 8.454328] pcie_plda 2b000000.pcie: Port link down, exit. | |
| [ 8.461993] pcie_plda 2c000000.pcie: Failed to get power-gpio, but maybe it's always on. | |
| [ 8.470233] pcie_plda 2c000000.pcie: host bridge /soc/pcie@2C000000 ranges: | |
| [ 8.477194] pcie_plda 2c000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000 | |
| [ 8.485338] pcie_plda 2c000000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000 | |
| [ 8.493488] ATR entry: 0x09c0000000 -> 0x0000000000 [0x0010000000] (param: 0x000001) | |
| [ 8.501266] ATR entry: 0x0038000000 -> 0x0038000000 [0x0008000000] (param: 0x000000) | |
| [ 8.509062] ATR entry: 0x0980000000 -> 0x0980000000 [0x0040000000] (param: 0x000000) | |
| [ 8.934544] pcie_plda 2c000000.pcie: Port link down, exit. | |
| [ 8.953969] clk-starfive-jh7110-vout 295c0000.clock-controller: starfive JH7110 clk_vout init successfully. | |
| [ 8.975595] clk-starfive-jh7110-isp 19810000.clock-controller: starfive JH7110 clk_isp init successfully. | |
| [ 8.985869] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels | |
| [ 8.995968] printk: console [ttyS0] disabled | |
| [ 9.020411] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 17, base_baud = 1500000) is a 16550A | |
| [ 9.029323] printk: console [ttyS0] enabled | |
| [ 9.029323] printk: console [ttyS0] enabled | |
| [ 9.037639] printk: bootconsole [sbi0] disabled | |
| [ 9.037639] printk: bootconsole [sbi0] disabled | |
| [ 9.047396] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter! | |
| [ 9.055611] jh7110-vin 19800000.vin_sysctl: stfcamss probe success! | |
| [ 9.075629] dwmmc_starfive 16010000.sdio0: IDMAC supports 32-bit address mode. | |
| [ 9.083056] dwmmc_starfive 16010000.sdio0: Using internal DMA controller. | |
| [ 9.084825] dwmmc_starfive 16020000.sdio1: IDMAC supports 32-bit address mode. | |
| [ 9.089971] dwmmc_starfive 16010000.sdio0: Version ID is 290a | |
| [ 9.097327] dwmmc_starfive 16020000.sdio1: Using internal DMA controller. | |
| [ 9.103130] dwmmc_starfive 16010000.sdio0: DW MMC controller at irq 29,32 bit host data width,32 deep fifo | |
| [ 9.109941] dwmmc_starfive 16020000.sdio1: Version ID is 290a | |
| [ 9.110027] dwmmc_starfive 16020000.sdio1: DW MMC controller at irq 30,32 bit host data width,32 deep fifo | |
| [ 9.122615] mmc_host mmc0: card is non-removable. | |
| [ 9.125915] mmc_host mmc1: card is polling. | |
| [ 9.135425] jh7110-sec 16000000.crypto: will run requests pump with realtime priority | |
| [ 9.153957] jh7110-sec 16000000.crypto: Initialized | |
| [ 9.159686] starfive-i2s 120b0000.i2stx_4ch0: designware: play supported | |
| [ 9.166495] starfive-i2s 120b0000.i2stx_4ch0: designware: i2s master mode supported | |
| [ 9.174422] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin | |
| [ 9.180698] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 445 | |
| [ 9.188023] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO | |
| [ 9.193610] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator | |
| [ 9.202589] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end | |
| [ 9.208815] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000 | |
| [ 9.214570] cdns-dsi 295d0000.mipi: starfive dsi bind end | |
| [ 9.220613] cdns-dsi 295d0000.mipi: hs_rate.980000000, channel = 2 | |
| [ 9.354255] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248) | |
| [ 9.354260] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 400000Hz, actual 399193HZ div = 248) | |
| [ 9.602969] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 50000000Hz, actual 49500000HZ div = 2) | |
| [ 9.612851] mmc1: new high speed SDHC card at address 0007 | |
| [ 9.619153] mmcblk1: mmc1:0007 SL16G 14.5 GiB | |
| [ 9.632340] GPT:Primary header thinks Alt. header is not at the end of the disk. | |
| [ 9.639774] GPT:1638439 != 30318591 | |
| [ 9.643268] GPT:Alternate GPT header not at the end of the disk. | |
| [ 9.649285] GPT:1638439 != 30318591 | |
| [ 9.652779] GPT: Use GNU Parted to correct GPT errors. | |
| [ 9.657954] mmcblk1: p1 p2 p3 p4 | |
| [ 9.776900] sf-mipi-dphy-tx 295e0000.mipi-dphy: GET_AON_GP_REG | |
| [ 9.782743] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO | |
| [ 9.788752] random: fast init done | |
| [ 9.789072] sys_m31_dphy_tx_configure opts->mipi_dphy.hs_clk_rate = 980000000 | |
| [ 9.799370] sf-mipi-dphy-tx 295e0000.mipi-dphy: request dphy hs_rate 980Mbps | |
| [ 9.806568] sf-mipi-dphy-tx 295e0000.mipi-dphy: MIPI dphy-tx # PLL is not LOCKED | |
| [ 9.813994] sf-mipi-dphy-tx 295e0000.mipi-dphy: want dphy hs_rate 980Mbps | |
| [ 9.820806] sf-mipi-dphy-tx 295e0000.mipi-dphy: config dphy hs_rate 980Mbps | |
| [ 9.824253] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 300000Hz, actual 300000HZ div = 330) | |
| [ 9.827781] sf-mipi-dphy-tx 295e0000.mipi-dphy: MIPI dphy-tx # AON_POWER_READY_N active(0) | |
| [ 9.827793] sf-mipi-dphy-tx 295e0000.mipi-dphy: 1 SET_U0_MIPITX_DPHY_RESETB | |
| [ 9.852688] sf-mipi-dphy-tx 295e0000.mipi-dphy: 2 SET_U0_MIPITX_DPHY_RESETB | |
| [ 9.859667] sf-mipi-dphy-tx 295e0000.mipi-dphy: MIPI dphy-tx # PLL Locked | |
| [ 9.866475] cdns-dsi 295d0000.mipi: START dsi ppi_txbyte_hs | |
| [ 9.872053] cdns-dsi 295d0000.mipi: sys_mipi_dsi_set_ppi_txbyte_hs | |
| [ 9.880538] starfive_raxda_10inch 2-0020: dsi command return -61, mode 0 | |
| [ 9.889535] cdns-dsi 295d0000.mipi: STOP dsi ppi_txbyte_hs | |
| [ 9.895184] cdns-dsi 295d0000.mipi: sys_mipi_dsi_set_ppi_txbyte_hs | |
| [ 9.898730] of_cfs_init | |
| [ 9.901474] sf-mipi-dphy-tx 295e0000.mipi-dphy: 1 SET_U0_MIPITX_DPHY_RESETB | |
| [ 9.904005] of_cfs_init: OK | |
| [ 9.911050] sf-mipi-dphy-tx 295e0000.mipi-dphy: 2 SET_U0_MIPITX_DPHY_RESETB | |
| [ 9.922536] starfive-pwmdac 100b0000.pwmdac: clk_apb0 = 49500000, clk_pwmdac_apb = 49500000, clk_pwmdac_core = 4068493 | |
| [ 9.934079] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 10.052973] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 10.064169] starfive soc:display-subsystem: bound 29400000.dc8200 (ops 0xffffffff8107b290) | |
| [ 10.072546] innohdmi-starfive 29590000.hdmi: inno hdmi bind begin | |
| [ 10.079869] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| [ 10.088588] cfg80211: failed to load regulatory.db | |
| [ 10.089198] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success | |
| [ 10.103512] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done. | |
| [ 10.110098] innohdmi-starfive 29590000.hdmi: inno hdmi bind end | |
| [ 10.116035] starfive soc:display-subsystem: bound 29590000.hdmi (ops 0xffffffff8107c028) | |
| [ 10.124133] vs-simple-encoder soc:dsi-output: encoder_bind begin | |
| [ 10.130166] no panel, -517 | |
| [ 10.132879] vs-simple-encoder soc:dsi-output: encoder_bind error | |
| [ 10.138895] starfive soc:display-subsystem: bound soc:dsi-output (ops 0xffffffff8107bc70) | |
| [ 10.147501] [drm] Initialized starfive 1.0.0 20191101 for soc:display-subsystem on minor 1 | |
| [ 10.314252] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000Hz, actual 200000HZ div = 495) | |
| [ 10.655891] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 10.764254] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 100000Hz, actual 100000HZ div = 990) | |
| [ 11.163399] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 11.670757] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 12.734370] ALSA device list: | |
| [ 12.737413] #0: Starfive-PWMDAC-Sound-Card | |
| [ 12.741758] #1: Starfive-HDMI-Sound-Card | |
| [ 12.751192] Freeing unused kernel image (initmem) memory: 2196K | |
| [ 12.757506] Run /init as init process | |
| [ 12.761225] with arguments: | |
| [ 12.764277] /init | |
| [ 12.766590] earlyprintk | |
| [ 12.769426] with environment: | |
| [ 12.772613] HOME=/ | |
| [ 12.775041] TERM=linux | |
| find /dev/mmcblk1p4: 0 | |
| [ 13.282428] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. | |
| mount: /rootfs/dev/shm: special device /dev/shm does not exist. | |
| mount: /rootfs/dev/pts: special device /dev/pts does not exist. | |
| INIT: version booting | |
| INIT: No inittab.d directory found | |
| [ 13.871546] EXT4-fs (mmcblk1p4): re-mounted. Opts: (null). Quota mode: disabled. | |
| INIT: Entering runlevel: 3 | |
| Starting syslogd: OK | |
| Starting klogd: OK | |
| Running sysctl: OK | |
| Populating /dev using udev: [ 14.357469] udevd[231]: starting version 3.2.10 | |
| [ 14.384587] random: udevd: uninitialized urandom read (16 bytes read) | |
| [ 14.392612] random: udevd: uninitialized urandom read (16 bytes read) | |
| [ 14.399249] random: udevd: uninitialized urandom read (16 bytes read) | |
| [ 14.449038] udevd[232]: starting eudev-3.2.10 | |
| [ 14.616442] venc: loading out-of-tree module taints kernel. | |
| [ 14.624293] SUCCESS alloc_chrdev_region | |
| [ 14.630307] vdec 130a0000.vpu_dec: device init. | |
| [ 14.634911] SUCCESS alloc_chrdev_region | |
| [ 14.638068] cnm_jpu 13090000.jpu: init device. | |
| done | |
| Saving random seed: OK | |
| Starting rngd: OK | |
| Starting system message bus: dbus[276]: Unknown username "pulse" in message bus configuration file | |
| done | |
| Starting rpcbind: OK | |
| Starting iptables: OK | |
| Starting bluetoothd: OK | |
| Starting network: OK | |
| Starting Network Interface Plugging Daemon: eth0[ 16.656138] starfive-eth-plat 16030000.ethernet eth0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL) | |
| [ 16.684500] starfive-eth-plat 16030000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 | |
| [ 16.692781] dwmac4: Master AXI performs fixed burst length | |
| eth1[ 16.698299] starfive-eth-plat 16030000.ethernet eth0: No Safety Features support found | |
| . | |
| [ 16.706639] starfive-eth-plat 16030000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported | |
| Starting ofono ... [ 16.744256] starfive-eth-plat 16030000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| done. | |
| [ 16.767625] starfive-eth-plat 16040000.ethernet eth1: PHY [stmmac-1:00] driver [YT8531 Gigabit Ethernet] (irq=POLL) | |
| [ 16.780711] starfive-eth-plat 16040000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 | |
| [ 16.802365] dwmac4: Master AXI performs fixed burst length | |
| [ 16.807905] starfive-eth-plat 16040000.ethernet eth1: No Safety Features support found | |
| [ 16.815876] starfive-eth-plat 16040000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported | |
| Starting dropbear sshd: [ 16.854642] starfive-eth-plat 16040000.ethernet eth1: configuring for phy/rgmii-id link mode | |
| OK | |
| Starting multipathd: OK | |
| Starting NFS statd: OK | |
| Starting NFS services: OK | |
| Starting NFS daemon: rpc.nfsd: Unable to access /proc/fs/nfsd errno 2 (No such file or directory). | |
| Please try, as root, 'mount -t nfsd nfsd /proc/fs/nfsd' and then restart rpc.nfsd to correct the problem | |
| FAIL | |
| Starting NFS mountd: [ 17.214538] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com | |
| OK | |
| Starting isp_ctrl_daemon.sh: OK | |
| Starting DHCP server: FAIL | |
| No PARTLABEL=hibernation! | |
| Welcome to Buildroot | |
| buildroot login: [ 19.856435] starfive-eth-plat 16030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 19.884257] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| [ 20.824689] random: crng init done | |
| [ 20.828101] random: 7 urandom warning(s) missed due to ratelimiting | |
| Welcome to Buildroot | |
| buildroot login: | |
| Welcome to Buildroot | |
| buildroot login: root | |
| Password: | |
| # | |
| # uname -a | |
| Linux buildroot 5.15.0 #1 SMP Wed Jun 21 13:42:06 CST 2023 riscv64 GNU/Linux | |
| # | |
| # ls -l | |
| total 59 | |
| drwxr-xr-x 2 root root 1024 Jun 21 2023 ISP | |
| drwxr-xr-x 2 root root 1024 Jun 21 2023 e24 | |
| drwxr-xr-x 2 root root 1024 Jun 21 2023 mailbox | |
| -rwxrwxrwx 1 root root 19056 Jun 21 2023 mjpeg_dec_test | |
| -rwxr-xr-x 1 root root 123 Jun 21 2023 run_weston.sh | |
| -rwxr-xr-x 1 root root 3086 Jun 21 2023 usb_device.sh | |
| -rwxrwxrwx 1 root root 18936 Jun 21 2023 video_dec_test | |
| -rwxrwxrwx 1 root root 14880 Jun 21 2023 video_enc_test | |
| # | |
| # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment