Skip to content

Instantly share code, notes, and snippets.

@lupyuen
Created October 30, 2023 23:45
Show Gist options
  • Save lupyuen/0b1a98781e86ba11c5538eb1e3058718 to your computer and use it in GitHub Desktop.
Save lupyuen/0b1a98781e86ba11c5538eb1e3058718 to your computer and use it in GitHub Desktop.
[I][]
[I][] ____ ____ __ __ _
[I][] / __ \ | _ \ / _|/ _| | |
[I][] | | | |_ __ ___ _ __ | |_) | ___ _ _| |_| |_ __ _| | ___
[I][] | | | | '_ \ / _ \ '_ \| _ < / _ \| | | | _| _/ _` | |/ _ \
[I][] | |__| | |_) | __/ | | | |_) | (_) | |_| | | | || (_| | | (_) |
[I][] \____/| .__/ \___|_| |_|____/ \___/ \__,_|_| |_| \__,_|_|\___/
[I][] | |
[I][] |_|
[I][]
[I][] Powered by BouffaloLab
[I][] Build:11:52:04,Mar 6 2023
[I][] Copyright (c) 2023 OpenBouffalo team
[I][] Copyright (c) 2022 Bouffalolab team
[I][] dynamic memory init success,heap s[I][LowLoad] D0 start...
[I][LowLoad] low_load start...
[I][LowLoad] Header at 0x5d5ff000
[I][LowLoad] Section dtb(1) - Start 0x5d5ff100, Size 14314
[I][LowLoad] Copying DTB to 0x51ff8000...0x51ffb7ea
[I][LowLoad] Done!
[I][LowLoad] Section OpenSBI(2) - Start 0x5d60f100, Size 109864
[I][LowLoad] Copying OpenSBI to 0x3ef80000...0x3ef9ad28
[I][LowLoad] Done!
[I][LowLoad] Section Kernel(3) - Start 0x5d62f100, Size 315597
[I][LowLoad] Uncompressing Kernel to 0x50000[I][LowLoad] Done!
[I][LowLoad] CRC: 00000000
[I][LowLoad] load time: 61310 us
[I][LowLoad] g PMP
[I][LowLoad] Booting OpenSBI at 0x000000003ef80000 with DTB at 0x51ff8000
OpenSBI v1.2
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _| (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Pine64 Ox64 (D0)
Platform Features : medeleg
Platform HART Count : 1
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 1000000Hz
Platform Console Device : bflb_uart
Platform HSM Device : ---
Platform PMU Device : ---
Platform Reboot Device : ---
Platform Shutdown Device : ---
Firmware Base : 0x3ef80000
Firmware Size : 200 KB
Runtime SBI Version : 1.0
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x00000000e4008000-0x00000000e400bfff (I)
Domain0 Region01 : 0x00000000e4000000-0x00000000e4007fff (I)
Domain0 Region02 : 0x000000003ef80000-0x000000003efbffff ()
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000050000000
Domain0 Next Arg1 : 0x0000000051ff8000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART Priv Version : v1.11
Boot HART Base ISA : rv64imafdcvx
Boot HART ISA Extensions : time
Boot HART PMP Count : 8
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2023.04-rc2 (Mar 06 2023 - 11:48:40 +0000)
DRAM: 64 MiB
Core: 36 devices, 17 uclasses, devicetree: board
MMC: mmc@20060000: 0
Loading Environment from FAT... Card did not respond to voltage select! : -110
** Bad device specification mmc 0 **
Loading Environment from nowhere... OK
In: serial@30002000
Out: serial30002000
Err: serial@30002000
Net:
Warning: emac@20070000 (eth0) using random MAC address - 26:b5:b6:51:d0:71
eth0: emac@20070000
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
Retry time exceeded; starting again
missing environment variable: pxefile_addr_r
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
Retry time exceeded; starting again
BOOTP broadcast 1
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment