PinePhone dmesg Log

pinephone-dmesg.log

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.1.7-1-MANJARO-ARM (builduser@fh-mjr-build-lon-large) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Fri Jan 20 19:15:59 UTC 2023
[    0.000000] Machine model: Pine64 PinePhone (1.2)
[    0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '')
[    0.000000] printk: bootconsole [uart0] enabled
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xbfbb5000-0xbfbb6fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[    0.000000] cma: Reserved 256 MiB at 0x00000000ada00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 20 pages/cpu s43368 r8192 d30360 u81920
[    0.000000] pcpu-alloc: s43368 r8192 d30360 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: loglevel=4 console=tty0 console=ttyS0,115200 earlycon=uart,mmio32,0x01c28000 consoleblank=0 boot=PARTUUID=a48f197a-01 root=PARTUUID=a48f197a-02 rw rootwait quiet audit=0 bootsplash.bootfile=bootsplash-themes/manjaro/bootsplash
[    0.000000] Unknown kernel command line parameters "boot=PARTUUID=a48f197a-01 audit=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1766336K/2097152K available (12224K kernel code, 1260K rwdata, 3408K rodata, 2944K init, 461K bss, 68672K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1
[    0.000000] arch_timer: CPU0: Trapping CNTVCT access
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000256] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000980] Console: colour dummy device 80x25
[    0.001049] printk: console [tty0] enabled
[    0.001143] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.001161] pid_max: default: 32768 minimum: 301
[    0.001248] LSM: Security Framework initializing
[    0.001381] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001406] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.003548] cblist_init_generic: Setting adjustable number of callback queues.
[    0.003569] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.003679] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.003990] rcu: Hierarchical SRCU implementation.
[    0.003997] rcu: 	Max phase no-delay instances is 1000.
[    0.005780] smp: Bringing up secondary CPUs ...
[    0.007600] Detected VIPT I-cache on CPU1
[    0.007751] arch_timer: CPU1: Trapping CNTVCT access
[    0.007770] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.009044] Detected VIPT I-cache on CPU2
[    0.009149] arch_timer: CPU2: Trapping CNTVCT access
[    0.009161] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.010217] Detected VIPT I-cache on CPU3
[    0.010308] arch_timer: CPU3: Trapping CNTVCT access
[    0.010320] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.010414] smp: Brought up 1 node, 4 CPUs
[    0.010436] SMP: Total of 4 processors activated.
[    0.010445] CPU features: detected: 32-bit EL0 Support
[    0.010450] CPU features: detected: 32-bit EL1 Support
[    0.010458] CPU features: detected: CRC32 instructions
[    0.010549] CPU: All CPU(s) started at EL2
[    0.010566] alternatives: applying system-wide alternatives
[    0.012907] devtmpfs: initialized
[    0.023536] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.023577] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.035451] pinctrl core: initialized pinctrl subsystem
[    0.037156] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.038740] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.039095] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.039321] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.039911] thermal_sys: Registered thermal governor 'fair_share'
[    0.039919] thermal_sys: Registered thermal governor 'bang_bang'
[    0.039925] thermal_sys: Registered thermal governor 'step_wise'
[    0.039932] thermal_sys: Registered thermal governor 'power_allocator'
[    0.039985] cpuidle: using governor menu
[    0.040256] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.040387] ASID allocator initialised with 65536 entries
[    0.041629] Serial: AMBA PL011 UART driver
[    0.057519] platform 1ca0000.dsi: Fixing up cyclic dependency with 1c0c000.lcd-controller
[    0.058426] platform 1ee0000.hdmi: Fixing up cyclic dependency with 1c0d000.lcd-controller
[    0.062304] platform hdmi-connector: Fixing up cyclic dependency with 1ee0000.hdmi
[    0.075083] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.075105] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.075115] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.075121] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page
[    0.075129] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.075135] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.075143] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.075149] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.076038] cryptd: max_cpu_qlen set to 1000
[    0.078253] iommu: Default domain type: Translated 
[    0.078268] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.078626] SCSI subsystem initialized
[    0.078894] usbcore: registered new interface driver usbfs
[    0.078947] usbcore: registered new interface driver hub
[    0.078986] usbcore: registered new device driver usb
[    0.079322] mc: Linux media interface: v0.10
[    0.079375] videodev: Linux video capture interface: v2.00
[    0.079409] pps_core: LinuxPPS API ver. 1 registered
[    0.079416] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.079436] PTP clock support registered
[    0.079617] EDAC MC: Ver: 3.0.0
[    0.081470] clocksource: Switched to clocksource arch_sys_counter
[    0.081743] VFS: Disk quotas dquot_6.6.0
[    0.081794] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.090928] NET: Registered PF_INET protocol family
[    0.091266] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.093668] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.093780] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.093804] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.093968] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.094691] TCP: Hash tables configured (established 16384 bind 16384)
[    0.094866] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.094936] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.095167] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.095776] RPC: Registered named UNIX socket transport module.
[    0.095787] RPC: Registered udp transport module.
[    0.095792] RPC: Registered tcp transport module.
[    0.095798] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.096173] Trying to unpack rootfs image as initramfs...
[    0.096987] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.098039] kvm [1]: IPA Size Limit: 40 bits
[    0.099204] kvm [1]: vgic interrupt IRQ9
[    0.099352] kvm [1]: Hyp mode initialized successfully
[    0.101437] Initialise system trusted keyrings
[    0.101796] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    0.108927] zbud: loaded
[    0.110874] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.112028] NFS: Registering the id_resolver key type
[    0.112102] Key type id_resolver registered
[    0.112109] Key type id_legacy registered
[    0.112209] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.112226] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.112541] fuse: init (API version 7.37)
[    0.112878] 9p: Installing v9fs 9p2000 file system support
[    0.166800] NET: Registered PF_ALG protocol family
[    0.166839] Key type asymmetric registered
[    0.166846] Asymmetric key parser 'x509' registered
[    0.534449] Freeing initrd memory: 7568K
[    0.555641] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.555794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.581562] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.590459] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[    0.590576] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[    0.590656] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[    0.590703] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[    0.591192] lima 1c40000.gpu: bus rate = 200000000
[    0.591206] lima 1c40000.gpu: mod rate = 297000000
[    0.592328] [drm] Initialized lima 1.2.0 20200215 for 1c40000.gpu on minor 0
[    0.600972] loop: module loaded
[    0.606061] tun: Universal TUN/TAP device driver, 1.6
[    0.608850] VFIO - User Level meta-driver version: 0.3
[    0.611626] usbcore: registered new interface driver usb-storage
[    0.615917] sun6i-rtc 1f00000.rtc: registered as rtc0
[    0.615978] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:00:37 UTC (37)
[    0.616155] sun6i-rtc 1f00000.rtc: RTC enabled
[    0.616419] i2c_dev: i2c /dev entries driver
[    0.621011] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.622741] sdhci: Secure Digital Host Controller Interface driver
[    0.622765] sdhci: Copyright(c) Pierre Ossman
[    0.623006] Synopsys Designware Multimedia Card Interface Driver
[    0.624256] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.625744] ledtrig-cpu: registered to indicate activity on CPUs
[    0.626448] SMCCC: SOC_ID: ID = jep106:091e:1689 Revision = 0x00000001
[    0.626544] hid: raw HID events driver (C) Jiri Kosina
[    0.627725] usbcore: registered new interface driver usbhid
[    0.627754] usbhid: USB HID core driver
[    0.629709] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[    0.637113] Initializing XFRM netlink socket
[    0.637761] NET: Registered PF_INET6 protocol family
[    0.638941] Segment Routing with IPv6
[    0.638989] In-situ OAM (IOAM) with IPv6
[    0.641943] bpfilter: Loaded bpfilter_umh pid 518
[    0.642857] NET: Registered PF_PACKET protocol family
[    0.643076] 9pnet: Installing 9P2000 support
[    0.643125] Key type dns_resolver registered
[    0.643684] registered taskstats version 1
[    0.643724] Loading compiled-in X.509 certificates
[    0.644231] zswap: loaded using pool lzo/zbud
[    0.664635] sun8i-rotate 1020000.rotate: Device registered as /dev/video1
[    0.665093] platform 1100000.mixer: Fixing up cyclic dependency with 1c0d000.lcd-controller
[    0.665179] platform 1100000.mixer: Fixing up cyclic dependency with 1c0c000.lcd-controller
[    0.666822] platform 1200000.mixer: Fixing up cyclic dependency with 1c0d000.lcd-controller
[    0.666921] platform 1200000.mixer: Fixing up cyclic dependency with 1c0c000.lcd-controller
[    0.670643] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.671034] sun50i-a64-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
[    0.687954] scpi_protocol scpi: SCP Protocol 1.2 Firmware 0.5.10000 version
[    0.689024] sunxi-rsb 1f03400.rsb: RSB running at 4000000 Hz
[    0.689413] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
[    0.690383] axp20x-rsb sunxi-rsb-3a3: mask_invert=true is deprecated; please switch to unmask_base
[    0.692796] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0
[    0.694887] axp20x-adc axp813-adc: DMA mask not set
[    0.696018] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
[    0.703813] axp20x-battery-power-supply axp20x-battery-power-supply: Configuring battery thermal regulation for Pinephone
[    0.705086] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set
[    0.705252] axp20x-usb-power-supply axp20x-usb-power-supply: Increasing Vbus hold voltage to 4.5V
[    0.714035] dvdd-1v8-csi: Bringing 700000uV into 1800000-1800000uV
[    0.716103] vcc-1v8-typec: Bringing 3300000uV into 1800000-1800000uV
[    0.716681] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[    0.721694] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.724138] printk: console [ttyS0] disabled
[    0.724250] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 201, base_baud = 1500000) is a 16550A
[    0.724340] printk: console [ttyS0] enabled
[    0.724350] printk: bootconsole [uart0] disabled
[    0.726378] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 202, base_baud = 1500000) is a 16550A
[    0.726614] serial serial0: tty port ttyS1 registered
[    0.728244] 1c28c00.serial: ttyS2 at MMIO 0x1c28c00 (irq = 203, base_baud = 1500000) is a 16550A
[    0.733538] input: gpio-vibrator as /devices/platform/vibrator/input/input1
[    0.833937] Goodix-TS 0-005d: ID 917S, version: 0200
[    0.834170] Goodix-TS 0-005d: Direct firmware load for goodix_917S_cfg.bin failed with error -2
[    0.834688] i2c 0-0028: Fixing up cyclic dependency with 1c19400.phy
[    0.840735] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-005d/input/input2
[    0.848370] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    0.849442] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    0.851476] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[    0.852744] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[    0.853544] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[    0.853642] phy phy-1c19400.phy.1: Changing dr_mode to 1
[    0.853657] ehci-platform 1c1a000.usb: EHCI Host Controller
[    0.853684] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    0.853862] ehci-platform 1c1a000.usb: irq 210, io mem 0x01c1a000
[    0.854273] ehci-platform 1c1b000.usb: EHCI Host Controller
[    0.854303] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 2
[    0.854436] ehci-platform 1c1b000.usb: irq 211, io mem 0x01c1b000
[    0.855601] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    0.855643] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 3
[    0.860157] ohci-platform 1c1b400.usb: irq 213, io mem 0x01c1b400
[    0.861731] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[    0.863217] dw-apb-uart 1c28000.serial: forbid DMA for kernel console
[    0.869536] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    0.870479] hub 1-0:1.0: USB hub found
[    0.870565] hub 1-0:1.0: 1 port detected
[    0.874291] mmc1: new high speed SDIO card at address 0001
[    0.885501] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    0.886396] hub 2-0:1.0: USB hub found
[    0.886451] hub 2-0:1.0: 1 port detected
[    0.922337] hub 3-0:1.0: USB hub found
[    0.922403] hub 3-0:1.0: 1 port detected
[    1.041689] mmc2: new DDR MMC card at address 0001
[    1.042991] mmcblk2: mmc2:0001  14.7 GiB 
[    1.044736]  mmcblk2: p1 p2
[    1.046032] mmcblk2boot0: mmc2:0001  4.00 MiB 
[    1.047548] mmcblk2boot1: mmc2:0001  4.00 MiB 
[    1.061587] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    1.061660] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 4
[    1.061946] ohci-platform 1c1a400.usb: irq 212, io mem 0x01c1a400
[    1.126509] hub 4-0:1.0: USB hub found
[    1.126571] hub 4-0:1.0: 1 port detected
[    1.129276] Freeing unused kernel memory: 2944K
[    1.149656] Run /init as init process
[    1.149670]   with arguments:
[    1.149676]     /init
[    1.149682]   with environment:
[    1.149687]     HOME=/
[    1.149693]     TERM=linux
[    1.149699]     boot=PARTUUID=a48f197a-01
[    1.149705]     audit=0
[    1.848239] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input5
[    1.961898] pinephone-keyboard 2-0015: Keyboard was not found on the I2C bus, maybe it's disconnected.
[    2.214824] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Quota mode: none.
[    2.651238] systemd[1]: System time before build time, advancing clock.
[    2.737799] systemd[1]: systemd 252.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    2.737881] systemd[1]: Detected architecture arm64.
[    2.746234] systemd[1]: Hostname set to <manjaro-arm>.
[    3.059852] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported
[    3.751371] systemd[1]: Queued start job for default target Graphical Interface.
[    3.775662] systemd[1]: Created slice Slice /system/getty.
[    3.777873] systemd[1]: Created slice Slice /system/modprobe.
[    3.779553] systemd[1]: Created slice Slice /system/serial-getty.
[    3.780584] systemd[1]: Created slice User and Session Slice.
[    3.780968] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.781217] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.782072] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.782295] systemd[1]: Reached target Local Encrypted Volumes.
[    3.782422] systemd[1]: Reached target Local Integrity Protected Volumes.
[    3.782582] systemd[1]: Reached target Path Units.
[    3.782688] systemd[1]: Reached target Remote Encrypted Volumes.
[    3.782779] systemd[1]: Reached target Remote File Systems.
[    3.782855] systemd[1]: Reached target Slice Units.
[    3.782963] systemd[1]: Reached target Swaps.
[    3.783104] systemd[1]: Reached target Local Verity Protected Volumes.
[    3.783565] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.787920] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.793913] systemd[1]: Listening on Process Core Dump Socket.
[    3.802033] systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
[    3.802983] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.803585] systemd[1]: Listening on Journal Socket.
[    3.804264] systemd[1]: Listening on Network Service Netlink Socket.
[    3.805620] systemd[1]: Listening on udev Control Socket.
[    3.806119] systemd[1]: Listening on udev Kernel Socket.
[    3.806627] systemd[1]: Listening on User Database Manager Socket.
[    3.811470] systemd[1]: Mounting Huge Pages File System...
[    3.816565] systemd[1]: Mounting POSIX Message Queue File System...
[    3.822280] systemd[1]: Mounting Kernel Debug File System...
[    3.823080] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[    3.829551] systemd[1]: Mounting Temporary Directory /tmp...
[    3.836100] systemd[1]: Starting Create List of Static Device Nodes...
[    3.842170] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.848679] systemd[1]: Starting Load Kernel Module configfs...
[    3.855611] systemd[1]: Starting Load Kernel Module drm...
[    3.862420] systemd[1]: Starting Load Kernel Module efi_pstore...
[    3.870174] systemd[1]: Starting Load Kernel Module fuse...
[    3.880986] systemd[1]: Starting Load Kernel Modules...
[    3.887161] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.887703] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    3.894584] systemd[1]: Starting Coldplug All udev Devices...
[    3.905602] systemd[1]: Mounted Huge Pages File System.
[    3.906783] systemd[1]: Mounted POSIX Message Queue File System.
[    3.908153] systemd[1]: Mounted Kernel Debug File System.
[    3.909258] systemd[1]: Mounted Temporary Directory /tmp.
[    3.911226] systemd[1]: Finished Create List of Static Device Nodes.
[    3.924278] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.925205] systemd[1]: Finished Load Kernel Module configfs.
[    3.927338] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    3.928240] systemd[1]: Finished Load Kernel Module drm.
[    3.930184] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    3.931073] systemd[1]: Finished Load Kernel Module efi_pstore.
[    3.932365] EXT4-fs (mmcblk2p2): re-mounted. Quota mode: none.
[    3.932684] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    3.933668] systemd[1]: Finished Load Kernel Module fuse.
[    3.937304] systemd[1]: Finished Load Kernel Modules.
[    3.939024] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.978394] systemd[1]: Mounting FUSE Control File System...
[    3.983420] systemd[1]: Mounting Kernel Configuration File System...
[    3.983785] systemd[1]: First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    3.988722] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    3.989068] systemd[1]: Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    3.994894] systemd[1]: Starting Load/Save Random Seed...
[    4.000324] systemd[1]: Starting Apply Kernel Variables...
[    4.000818] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[    4.006803] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.011457] systemd[1]: Mounted FUSE Control File System.
[    4.012641] systemd[1]: Mounted Kernel Configuration File System.
[    4.087182] systemd[1]: Finished Apply Kernel Variables.
[    4.119094] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.119584] systemd[1]: Entropy Daemon based on the HAVEGE algorithm was skipped because of an unmet condition check (ConditionKernelVersion=<5.6).
[    4.166125] systemd[1]: Starting Journal Service...
[    4.171770] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.362510] systemd[1]: Started Journal Service.
[    4.421686] systemd-journald[1900]: Received client request to flush runtime journal.
[    4.445116] systemd-journald[1900]: File /var/log/journal/c1234fac8ed04b90a3dfc9e84a98963f/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    4.589479] random: crng init done
[    5.281074] FAT-fs (mmcblk2p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.382629] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.426033] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.742630] i2c 3-003c: Fixing up cyclic dependency with 1cb0000.csi
[    5.791155] systemd-journald[1900]: Oldest entry in /var/log/journal/c1234fac8ed04b90a3dfc9e84a98963f/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[    5.791195] systemd-journald[1900]: /var/log/journal/c1234fac8ed04b90a3dfc9e84a98963f/system.journal: Journal header limits reached or header out-of-date, rotating.
[    5.828494] i2c 3-004c: Fixing up cyclic dependency with 1cb0000.csi
[    5.829087] i2c-gpio i2c-csi: using lines 141 (SDA) and 140 (SCL)
[    5.961555] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { P2862 } 6 jiffies s: 169 root: 0x0/T
[    5.972003] fbcon: Taking over console
[    5.972034] rcu: blocking rcu_node structures (internal RCU debug):
[    6.184346] musb-sunxi 1c19000.usb: Disabling musb host side code due to re-routed phy
[    6.185137] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator
[    6.185743] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests
[    6.341118] dw-apb-uart 1c28c00.serial: failed to request DMA
[    6.414344] zram: Added device: zram0
[    6.418378] anx7688 0-0028: power enabled
[    6.418696] anx7688 0-0028: Vendor id 0x1f29
[    6.437035] anx7688 0-0028: power disabled
[    6.437882] zram0: detected capacity change from 0 to 6116976
[    6.439724] anx7688 0-0028: enabling USB BC 1.2 detection
[    6.440201] anx7688 0-0028: plug irq (cd=1)
[    6.453608] anx7688 0-0028: cable inserted
[    6.484161] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008cc48b8)
[    6.487042] sun4i-drm display-engine: bound 1200000.mixer (ops 0xffff800008cc48b8)
[    6.487383] Adding 3058484k swap on /dev/zram0.  Priority:100 extents:1 across:3058484k SSFS
[    6.488361] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[    6.488410] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffff800008cc1988)
[    6.488928] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffff800008cc1988)
[    6.488981] sun4i-drm display-engine: bound 1ca0000.dsi (ops 0xffff800008cc36b8)
[    6.493663] anx7688 0-0028: power enabled
[    6.494977] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[    6.496443] Bluetooth: Core ver 2.22
[    6.496655] NET: Registered PF_BLUETOOTH protocol family
[    6.496665] Bluetooth: HCI device and connection manager initialized
[    6.496696] Bluetooth: HCI socket layer initialized
[    6.496709] Bluetooth: L2CAP socket layer initialized
[    6.496739] Bluetooth: SCO socket layer initialized
[    6.497902] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[    6.499273] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xffff800008cc3bc0)
[    6.543998] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
[    6.544117] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[    6.589041] bootsplash: Loading splash file (606512 bytes)
[    6.589151] bootsplash: Loaded (606512 bytes, 2 pics, 76 blobs).
[    6.591543] iio iio:device3: DRDY on pin INT2 specified, but sensor does not support interrupts
[    6.604318] 8723cs: module is from the staging directory, the quality is unknown, you have been warned.
[    6.633944] iio iio:device3: interrupts on the rising edge
[    6.679342] SPI driver st-magn-spi has no spi_device_id for st,lis3mdl-magn
[    6.679364] SPI driver st-magn-spi has no spi_device_id for st,lsm303agr-magn
[    6.679368] SPI driver st-magn-spi has no spi_device_id for st,lsm9ds1-magn
[    6.699009] Bluetooth: HCI UART driver ver 2.3
[    6.699043] Bluetooth: HCI UART protocol H4 registered
[    6.699205] Bluetooth: HCI UART protocol LL registered
[    6.699281] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.699733] Bluetooth: HCI UART protocol Broadcom registered
[    6.699908] dw-apb-uart 1c28400.serial: failed to request DMA
[    6.811260] i2c i2c-1: Added multiplexed i2c bus 5
[    6.812287] Console: switching to colour frame buffer device 90x90
[    6.847748] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
[    6.881745] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599
[    6.881786] panel-sitronix-st7703 1ca0000.dsi.0: 720x1440@60 24bpp dsi 4dl - ready
[    6.885528] sun8i-di 1e00000.deinterlace: Device registered as /dev/video3
[    7.336225] simple-amplifier audio-amplifier: supply VCC not found, using dummy regulator
[    7.447600] debugfs: File 'Bluetooth Playback' in directory 'dapm' already present!
[    7.456073] debugfs: File 'Bluetooth Capture' in directory 'dapm' already present!
[    7.478331] gc2145 3-003c: device id: 0x2145
[    7.481944] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[    7.481988] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[    7.515664] Bluetooth: hci0: RTL: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8703
[    7.520337] Bluetooth: hci0: RTL: chip_type status=0 type=5
[    7.524486] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    7.524519] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723cs_xx_fw.bin
[    7.533007] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723cs_xx_config.bin
[    7.565746] Bluetooth: hci0: RTL: cfg_sz 63, total sz 19427
[    7.761254] input: PinePhone Headset Jack as /devices/platform/sound/sound/card0/input6
[    7.888469] Bluetooth: hci0: RTL: fw version 0xaa5ca4dc
[    8.109672] anx7688 0-0028: boot firmware load failed (you may need to flash FW to anx7688 first)
[    8.133632] anx7688 0-0028: power disabled
[    8.133688] anx7688 0-0028: OCM configuration failed
[    8.138884] anx7688 0-0028: spurious status irq
[    8.439947] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.439978] Bluetooth: BNEP filters: protocol multicast
[    8.440000] Bluetooth: BNEP socket layer initialized
[    8.449601] Bluetooth: MGMT ver 1.22
[   12.004034] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   16.270575] gc2145 3-003c: device id: 0x2145
[   16.273756] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[   16.273774] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[   16.808547] Bluetooth: RFCOMM TTY layer initialized
[   16.808599] Bluetooth: RFCOMM socket layer initialized
[   16.808638] Bluetooth: RFCOMM ver 1.11
[   19.723136] usb 2-1: new high-speed USB device number 2 using ehci-platform
[   20.034397] usbcore: registered new interface driver option
[   20.034536] usbserial: USB Serial support registered for GSM modem (1-port)
[   20.034852] option 2-1:1.0: GSM modem (1-port) converter detected
[   20.039158] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[   20.040021] option 2-1:1.1: GSM modem (1-port) converter detected
[   20.055383] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[   20.056042] option 2-1:1.2: GSM modem (1-port) converter detected
[   20.079635] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
[   20.079965] option 2-1:1.3: GSM modem (1-port) converter detected
[   20.081359] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
[   20.087706] usbcore: registered new interface driver cdc_wdm
[   20.159947] qmi_wwan 2-1:1.4: cdc-wdm0: USB WDM device
[   20.170178] qmi_wwan 2-1:1.4 wwan0: register 'qmi_wwan' at usb-1c1b000.usb-1, WWAN/QMI device, 02:8b:b1:73:41:1f
[   20.173091] usbcore: registered new interface driver qmi_wwan
[   20.323005] rfkill: input handler disabled
[   31.712430] dc1sw: disabling
[   31.713032] vcc-1v2-hsic: disabling
[   33.564413] gc2145 3-003c: device id: 0x2145
[   33.567767] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[   33.571936] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[   35.512526] gc2145 3-003c: device id: 0x2145
[   35.521863] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[   35.521966] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[   35.808462] gc2145 3-003c: device id: 0x2145
[   35.811799] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[   35.811970] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[   36.084745] gc2145 3-003c: device id: 0x2145
[   36.089141] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[   36.089225] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[   36.316626] gc2145 3-003c: device id: 0x2145
[   36.325465] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[   36.325657] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[   36.588867] gc2145 3-003c: device id: 0x2145
[   36.595976] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[   36.596056] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[   36.832532] gc2145 3-003c: device id: 0x2145
[   36.838065] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
[   36.838124] gc2145 3-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
[  364.263070] PM: suspend entry (deep)
[  364.402540] Filesystems sync: 0.139 seconds
[  364.403731] Freezing user space processes ... (elapsed 0.007 seconds) done.
[  364.410966] OOM killer disabled.
[  364.410976] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  364.412889] printk: Suspending console(s) (use no_console_suspend to debug)
[  364.418918] musb-sunxi 1c19000.usb: sunxi-musb does not have ULPI bus control register
[  364.584315] Disabling non-boot CPUs ...
[  364.598172] psci: CPU1 killed (polled 4 ms)
[  364.634844] psci: CPU2 killed (polled 0 ms)
[  364.667804] psci: CPU3 killed (polled 0 ms)
[  364.696436] Enabling non-boot CPUs ...
[  364.704481] Detected VIPT I-cache on CPU1
[  364.707029] arch_timer: CPU1: Trapping CNTVCT access
[  364.707462] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[  364.720686] CPU1 is up
[  364.723020] Detected VIPT I-cache on CPU2
[  364.723793] arch_timer: CPU2: Trapping CNTVCT access
[  364.723990] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[  364.729775] CPU2 is up
[  364.732448] Detected VIPT I-cache on CPU3
[  364.733095] arch_timer: CPU3: Trapping CNTVCT access
[  364.733270] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[  364.740498] CPU3 is up
[  364.746690] sunxi-rsb 1f03400.rsb: RSB running at 4000000 Hz
[  365.000218] musb-sunxi 1c19000.usb: sunxi-musb does not have ULPI bus control register
[  365.000870] phy phy-1c19400.phy.1: Changing dr_mode to 2
[  365.091781] OOM killer enabled.
[  365.091924] Restarting tasks ... done.
[  365.441611] PM: suspend exit
[  368.330791] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready