Created
May 8, 2024 10:17
-
-
Save lupyuen/b778986ba87c18067cd993b92c673634 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
C.SCS/0/0.WD.URPL.SDI/25000000/6000000.BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J. | |
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00 | |
st_on_reason=d0000 | |
st_off_reason=0 | |
P2S/0x1000/0xc00a200. | |
SD/0x9200/0x1000/0x1000/0.P2E. | |
DPS/0xa200/0x2000. | |
SD/0xa200/0x2000/0x2000/0.DPE. | |
DDR init. | |
ddr_param[0]=0x78075562. | |
pkg_type=1 | |
D2_4_1 | |
DDR3-4G-BGA | |
Data rate=1866. | |
DDR BIST PASS | |
PLLS/OD. | |
C2S/0xc200/0x9fe00000/0x200. | |
SD/0xc200/0x200/0x200/0.RSC. | |
C2E. | |
MS/0xc400/0x80000000/0x1b000. | |
SD/0xc400/0x1b000/0x1b000/0.ME. | |
L2/0x27400. | |
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00 | |
COMP/1. | |
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1. | |
DCP/0x75aa0/0. | |
Loader_2nd loaded. | |
Switch RTC mode to xtal32k | |
Jump to monitor at 0x80000000. | |
OPENSBI: next_addr=0x80200020 arg1=0x80080000 | |
OpenSBI v0.9 | |
____ _____ ____ _____ | |
/ __ \ / ____| _ \_ _| | |
| | | |_ __ ___ _ __ | (___ | |_) || | | |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |
| |__| | |_) | __/ | | |____) | |_) || |_ | |
\____/| .__/ \___|_| |_|_____/|____/_____| | |
| | | |
|_| | |
Platform Name : Milk-V DuoS | |
Platform Features : mfdeleg | |
Platform HART Count : 1 | |
Platform IPI Device : clint | |
Platform Timer Device : clint | |
Platform Console Device : uart8250 | |
Platform HSM Device : --- | |
Platform SysReset Device : --- | |
Firmware Base : 0x80000000 | |
Firmware Size : 132 KB | |
Runtime SBI Version : 0.3 | |
Domain0 Name : root | |
Domain0 Boot HART : 0 | |
Domain0 HARTs : 0* | |
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I) | |
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff () | |
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X) | |
Domain0 Next Address : 0x0000000080200020 | |
Domain0 Next Arg1 : 0x0000000080080000 | |
Domain0 Next Mode : S-mode | |
Domain0 SysReset : yes | |
Boot HART ID : 0 | |
Boot HART Domain : root | |
Boot HART ISA : rv64imafdcvsux | |
Boot HART Features : scounteren,mcounteren,time | |
Boot HART PMP Count : 16 | |
Boot HART PMP Granularity : 4096 | |
Boot HART PMP Address Bits: 38 | |
Boot HART MHPM Count : 8 | |
Boot HART MHPM Count : 8 | |
Boot HART MIDELEG : 0x0000000000000222 | |
Boot HART MEDELEG : 0x000000000000b109 | |
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x | |
DRAM: 510 MiB | |
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000 | |
set_rtc_register_for_power | |
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1 | |
Loading Environment from FAT... mmc1 : finished tuning, code:53 | |
OK | |
In: serial | |
Out: serial | |
Err: serial | |
Net: | |
Warning: ethernet@4070000 (eth0) using random MAC address - ee:a8:0b:1e:b8:84 | |
eth0: ethernet@4070000 | |
Hit any key to stop autoboot: 0 | |
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done | |
Speed: 100, full duplex | |
BOOTP broadcast 1 | |
BOOTP broadcast 2 | |
*** Unhandled DHCP Option in OFFER/ACK: 43 | |
*** Unhandled DHCP Option in OFFER/ACK: 43 | |
DHCP client bound to address 192.168.31.143 (539 ms) | |
Using ethernet@4070000 device | |
TFTP from server 192.168.31.10; our IP address is 192.168.31.143 | |
Filename 'Image-sg2000'. | |
Load address: 0x80200000 | |
Loading: ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ################################################################# | |
. ############################################################ | |
. 1.2 MiB/s | |
done | |
Bytes transferred = 14227032 (d91658 hex) | |
Speed: 100, full duplex | |
Using ethernet@4070000 device | |
TFTP from server 192.168.31.10; our IP address is 192.168.31.143 | |
Filename 'jh7110-star64-pine64.dtb'. | |
Load address: 0x81200000 | |
Loading: #### | |
. 1.2 MiB/s | |
done | |
Bytes transferred = 50235 (c43b hex) | |
## Flattened Device Tree blob at 81200000 | |
Booting using the fdt blob at 0x81200000 | |
Loading Device Tree to 000000009f26e000, end 000000009f27d43a ... OK | |
Starting kernel ... | |
123ABCnx_start: Entry | |
uart_register: Registering /dev/console | |
uart_register: Registering /dev/ttyS0 | |
work_start_lowpri: Starting low-priority kernel worker thread(s) | |
nxtask_activate: lpwork pid=1,TCB=0x80409130 | |
nxtask_activate: AppBringUp pid=2,TCB=0x80409740 | |
nx_start_application: Starting init task: /system/bin/init | |
elf_symname: Symbol has no name | |
elf_symvalue: SHN_UNDEF: Failed to get symbol name: -3 | |
elf_relocateadd: Section 2 reloc 2: Undefined symbol[0] has no name: -3 | |
nxtask_activate: /system/bin/init pid=3,TCB=0x8040b730 | |
nxtask_exit: AppBringUp pid=2,TCB=0x80409740 | |
NuttShell (NSH) NuttX-12.4.0 | |
nsh> nx_start: CPU0: Beginning Idle Loop | |
ls | |
posix_spawn: pid=0xc0202968 path=ls file_actions=0xc0202970 attr=0xc0202978 argv=0xc0202a18 | |
exec_internal: ERROR: Failed to load program 'ls': -2 | |
nxposix_spawn_exec: ERROR: exec failed: 2 | |
/: | |
dev/ | |
proc/ | |
system/ | |
nsh> | |
nsh> uname -a | |
posix_spawn: pid=0xc0202968 path=uname file_actions=0xc0202970 attr=0xc0202978 argv=0xc0202a18 | |
exec_internal: ERROR: Failed to load program 'uname': -2 | |
nxposix_spawn_exec: ERROR: exec failed: 2 | |
NuttX 12.4.0 122c717 May 8 2024 18:13:30 risc-v ox64 | |
nsh> | |
nsh> free | |
posix_spawn: pid=0xc0202968 path=free file_actions=0xc0202970 attr=0xc0202978 argv=0xc0202a18 | |
exec_internal: ERROR: Failed to load program 'free': -2 | |
nxposix_spawn_exec: ERROR: exec failed: 2 | |
total used free maxused maxfree nused nfree | |
Kmem: 2065400 14296 2051104 76632 2049392 36 3 | |
Page: 20971520 647168 20324352 20324352 | |
nsh> | |
nsh> ls /dev | |
posix_spawn: pid=0xc0202968 path=ls file_actions=0xc0202970 attr=0xc0202978 argv=0xc0202a18 | |
exec_internal: ERROR: Failed to load program 'ls': -2 | |
nxposix_spawn_exec: ERROR: exec failed: 2 | |
/dev: | |
console | |
null | |
ram0 | |
ttyS0 | |
zero | |
nsh> | |
nsh> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment