Created
December 1, 2023 05:46
-
-
Save lupyuen/cf32c834f4f5b8f66715ee4c606b7580 to your computer and use it in GitHub Desktop.
NuttX on Ox64 BL808: Clear Pending Interrupts, responds OK to keypress yay! But keypress is null. See https://github.com/lupyuen/nuttx-ox64
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [I][] | |
| [I][] ____ ____ __ __ _ | |
| [I][] / __ \ | _ \ / _|/ _| | | | |
| [I][] | | | |_ __ ___ _ __ | |_) | ___ _ _| |_| |_ __ _| | ___ | |
| [I][] | | | | '_ \ / _ \ '_ \| _ < / _ \| | | | _| _/ _` | |/ _ \ | |
| [I][] | |__| | |_) | __/ | | | |_) | (_) | |_| | | | || (_| | | (_) | | |
| [I][] \____/| .__/ \___|_| |_|____/ \___/ \__,_|_| |_| \__,_|_|\___/ | |
| [I][] | | | |
| [I][] |_| | |
| [I][] | |
| [I][] Powered by BouffaloLab | |
| [I][] Build:11:52:04,Mar 6 2023 | |
| [I][] Copyright (c) 2023 OpenBouffalo team | |
| [I][] Copyright (c) 2022 Bouffalolab team | |
| [I][] dynamic memory init success,heap s[I][LowLoad] D0 start... | |
| [I][LowLoad] low_load start... | |
| [I][LowLoad] Header at 0x5d5ff000 | |
| [I][LowLoad] Section dtb(1) - Start 0x5d5ff100, Size 14314 | |
| [I][LowLoad] Copying DTB to 0x51ff8000...0x51ffb7ea | |
| [I][LowLoad] Done! | |
| [I][LowLoad] Section OpenSBI(2) - Start 0x5d60f100, Size 109864 | |
| [I][LowLoad] Copying OpenSBI to 0x3ef80000...0x3ef9ad28 | |
| [I][LowLoad] Done! | |
| [I][LowLoad] Section Kernel(3) - Start 0x5d62f100, Size 315597 | |
| [I][LowLoad] Uncompressing Kernel to 0x50000000... | |
| [I][LowLoad] Done! | |
| [I][LowLoad] CRC: 00000000 | |
| [I][LowLoad] load time: 61449 us | |
| [I][LowLoad] Setting PMP | |
| [I][LowLoad] Booting OpenSBI at 0x000000003ef80000 with DTB at 0x51ff8000 | |
| OpenSBI v1.2 | |
| ____ _____ ____ _____ | |
| / __ \ / ____| _ \_ _| | |
| | | | |_ __ ___ _ __ | (___ | |_) || | | |
| | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |
| | |__| | |_) | __/ | | |____) | |_) || |_ | |
| \____/| .__/ \___|_| |_|_____/|____/_____| | |
| | | | |
| |_| | |
| Platform Name : Pine64 Ox64 (D0) | |
| Platform Features : medeleg | |
| Platform HART Count : 1 | |
| Platform IPI Device : aclint-mswi | |
| Platform Timer Device : aclint-mtimer @ 1000000Hz | |
| Platform Console Device : bflb_uart | |
| Platform HSM Device : --- | |
| Platform PMU Device : --- | |
| Platform Reboot Device : --- | |
| Platform Shutdown Device : --- | |
| Firmware Base : 0x3ef80000 | |
| Firmware Size : 200 KB | |
| Runtime SBI Version : 1.0 | |
| Domain0 Name : root | |
| Domain0 Boot HART : 0 | |
| Domain0 HARTs : 0* | |
| Domain0 Region00 : 0x00000000e4008000-0x00000000e400bfff (I) | |
| Domain0 Region01 : 0x00000000e4000000-0x00000000e4007fff (I) | |
| Domain0 Region02 : 0x000000003ef80000-0x000000003efbffff () | |
| Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff (R,W,X) | |
| Domain0 Next Address : 0x0000000050000000 | |
| Domain0 Next Arg1 : 0x0000000051ff8000 | |
| Domain0 Next Mode : S-mode | |
| Domain0 SysReset : yes | |
| Boot HART ID : 0 | |
| Boot HART Domain : root | |
| Boot HART Priv Version : v1.11 | |
| Boot HART Base ISA : rv64imafdcvx | |
| Boot HART ISA Extensions : time | |
| Boot HART PMP Count : 8 | |
| Boot HART PMP Granularity : 4096 | |
| Boot HART PMP Address Bits: 38 | |
| Boot HART MHPM Count : 8 | |
| Boot HART MIDELEG : 0x0000000000000222 | |
| Boot HART MEDELEG : 0x000000000000b109 | |
| U-Boot 2023.04-rc2 (Mar 06 2023 - 11:48:40 +0000) | |
| DRAM: 64 MiB | |
| Core: 36 devices, 17 uclasses, devicetree: board | |
| MMC: mmc@20060000: 0 | |
| Loading Environment from FAT... Unable to read "uboot.env" from mmc0:2... | |
| Loading Environment from nowhere... OK | |
| In: serial@30002000 | |
| Out: serial@30002000 | |
| Err: serial@30002000 | |
| Net: | |
| Warning: emac@20070000 (eth0) using random MAC address - 82:1b:f1:3c:17:eb | |
| eth0: emac@20070000 | |
| Hit any key to stop autoboot: 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:2... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| Select the boot mode | |
| 1:.Pine64 0X64 Kernel | |
| 2:.Sipeed M1SDock Kernel | |
| Enter choice: 1:.Pine64 0X64 Kernel | |
| Retrieving file: /extlinux/../Image | |
| append: root=PARTLABEL=rootfs rootwait rw rootfstype=ext4 console=ttyS0,2000000 loglevel=8 earlycon=sbi | |
| Retrieving file: /extlinux/../bl808-pine64-ox64.dtb | |
| ## Flattened Device Tree blob at 51ff8000 | |
| Booting using the fdt blob at 0x51ff8000 | |
| Working FDT set to 51ff8000 | |
| Loading Device Tree to 0000000053f22000, end 0000000053f25fab ... OK | |
| Working FDT set to 53f22000 | |
| Starting kernel ... | |
| 123jh7110_copy_ramdisk: _edata=0x50400258, _sbss=0x50400290, _ebss=0x50407000, JH7110_IDLESTACKTOP=0x50407c00 | |
| jh7110_copy_ramdisk: ramdisk_addr=0x50410281 | |
| jh7110_copy_ramdisk: size=8192000 | |
| ABCjh7110_mm_init: Test Interrupt Priority | |
| test_interrupt_priority: before50=0, before54=0, after50=1, after54=0 | |
| jh7110_kernel_mappings: map I/O regions | |
| jh7110_kernel_mappings: map PLIC as Interrupt L2 | |
| jh7110_kernel_mappings: connect the L1 and Interrupt L2 page tables for PLIC | |
| jh7110_kernel_mappings: map kernel text | |
| jh7110_kernel_mappings: map kernel data | |
| jh7110_kernel_mappings: connect the L1 and L2 page tables | |
| jh7110_kernel_mappings: map the page pool | |
| mmu_satp_reg: pgbase=0x50406000, asid=0x0, reg=0x8000000000050406 | |
| mmu_write_satp: reg=0x8000000000050406 | |
| nx_start: Entry | |
| up_irqinitialize: | |
| PLIC Interrupt Priority: Before (0xe0000004): | |
| 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0040 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 ................ | |
| 0050 01 00 00 00 01 00 00 00 01 00 00 00 00 00 00 00 ................ | |
| 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| PLIC Interrupt Priority: After (0xe0000004): | |
| 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| irq_attach: irq=0, isr=0x5020172e | |
| irq_attach: irq=1, isr=0x5020172e | |
| irq_attach: irq=2, isr=0x5020172e | |
| irq_attach: irq=3, isr=0x5020172e | |
| irq_attach: irq=5, isr=0x5020172e | |
| irq_attach: irq=7, isr=0x5020172e | |
| irq_attach: irq=4, isr=0x5020172e | |
| irq_attach: irq=6, isr=0x5020172e | |
| irq_attach: irq=8, isr=0x5020194c | |
| irq_attach: irq=9, isr=0x5020172e | |
| irq_attach: irq=10, isr=0x5020172e | |
| irq_attach: irq=11, isr=0x5020172e | |
| irq_attach: irq=12, isr=0x5020172e | |
| irq_attach: irq=13, isr=0x5020172e | |
| irq_attach: irq=14, isr=0x5020172e | |
| irq_attach: irq=15, isr=0x5020172e | |
| irq_attach: irq=19, isr=0x5020172e | |
| up_irq_enable: | |
| irq_attach: irq=17, isr=0x5020adee | |
| up_enable_irq: irq=17 | |
| uart_register: Registering /dev/console | |
| irq_attach: irq=45, isr=0x50200d24 | |
| up_enable_irq: irq=45 | |
| PLIC Hart 0 S-Mode Interrupt Enable: Before (0xe0002080): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| up_enable_irq: extirq=20, addr=0xe0002080, val=0x1048576 | |
| PLIC Hart 0 S-Mode Interrupt Enable: After (0xe0002080): | |
| 0000 00 00 10 00 00 00 10 00 ........ | |
| bl602_attach: BL602_UART_INT_STS=0x84 | |
| bl602_attach: BL602_UART_INT_MASK=0xfff | |
| bl602_attach: BL602_UART_INT_CLEAR=0x0 | |
| bl602_attach: BL602_UART_INT_EN=0xfff | |
| bl602_attach: BL602_UART_FIFO_CONFIG_0=0x80 | |
| UART Registers (0x30002000): | |
| 0000 05 17 00 00 01 07 00 00 13 00 13 00 00 00 00 00 ................ | |
| 0010 70 00 9f 00 6f 00 00 00 0f 00 00 00 00 00 00 00 p...o........... | |
| 0020 84 00 00 00 ff 0f 00 00 00 00 00 00 ff 0f 00 00 ................ | |
| 0030 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0040 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 ................ | |
| 0050 ff ff 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0080 80 00 00 00 1d 00 07 07 0a 00 00 00 00 00 00 00 ................ | |
| 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00d0 00 00 00 00 00 00 00 00 ........ | |
| PLIC Interrupt Priority (0xe0000004): | |
| 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| PLIC Hart 0 S-Mode Interrupt Enable (0xe0002080): | |
| 0000 00 00 10 00 00 00 10 00 ........ | |
| PLIC Hart 0 S-Mode Priority Threshold (0xe0201000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| PLIC Hart 0 S-Mode Claim / Complete (0xe0201004): | |
| 0000 00 00 00 00 .... | |
| Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| PLIC Hart 0 M-Mode Interrupt Enable (0xe0002000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| PLIC Hart 0 M-Mode Priority Threshold (0xe0200000): | |
| 0000 07 00 00 00 07 00 00 00 ........ | |
| PLIC Hart 0 M-Mode Claim / Complete (0xe0200004): | |
| 0000 07 00 00 00 .... | |
| bl602_attach: Test Interrupt Priority | |
| test_interrupt_priority: before50=0, before54=0, after50=1, after54=1 | |
| bl602_attach: Set PLIC Interrupt Priority to 1 | |
| PLIC Interrupt Priority (0xe0000004): | |
| 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0040 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 ................ | |
| 0050 01 00 00 00 01 00 00 00 01 00 00 00 00 00 00 00 ................ | |
| 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ | |
| 0130 00 00 00 00 00 00 00 0 00 00 00 00 00 00 00 00 ................ | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| work_start_lowpri: Starting low-priority kernel worker thread(s) | |
| nx_start_application: Starting init task: /system/bin/init | |
| up_addrenv_create: textsize=0x15b80, datasize=0x584, heapsize=0x80000, addrenv=0x5040b880 | |
| mmu_satp_reg: pgbase=0x50600000, asid=0x0, reg=0x8000000000050600 | |
| up_addrenv_select: addrenv=0x5040b880, satp=0x8000000000050600 | |
| mmu_write_satp: reg=0x8000000000050600 | |
| elf_symname: Symbol has no name | |
| elf_symvalue: SHN_UNDEF: Failed to get symbol name: -3 | |
| elf_relocateadd: Section 2 reloc 2: Undefined symbol[0] has no name: -3 | |
| up_exit: TCB=0x50409900 exiting | |
| NuttShell (NSH) NuttX-12.0.3 | |
| riscv_dispatch_irq: Clear Pending Interrupts, irq=45, claim=0 | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| nsh> riscv_dispatch_irq: Clear Pending Interrupts, irq=45, claim=0 | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| riscv_dispatch_irq: Clear Pending Interrupts, irq=45, claim=0 | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| nx_start: CPU0: Beginning Idle Loop | |
| bl602_receive: rxdata=-1 | |
| bl602_receive: rxdata=0x0 | |
| riscv_dispatch_irq: Clear Pending Interrupts, irq=45, claim=0 | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| bl602_receive: rxdata=-1 | |
| bl602_receive: rxdata=0x0 | |
| riscv_dispatch_irq: Clear Pending Interrupts, irq=45, claim=0 | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| bl602_receive: rxdata=-1 | |
| bl602_receive: rxdata=0x0 | |
| riscv_dispatch_irq: Clear Pending Interrupts, irq=45, claim=0 | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ | |
| bl602_receive: rxdata=-1 | |
| bl602_receive: rxdata=0x0 | |
| riscv_dispatch_irq: Clear Pending Interrupts, irq=45, claim=0 | |
| PLIC Interrupt Pending (0xe0001000): | |
| 0000 00 00 00 00 00 00 00 00 ........ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment