Created
June 27, 2023 10:22
-
-
Save lupyuen/d73ace627318375fe20e90e4950f9c50 to your computer and use it in GitHub Desktop.
Boot Armbian on Pine64 Star64 RISC-V SBC. See https://github.com/lupyuen/nuttx-star64
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot SPL 2021.10 (Jan 19 2023 - 04:09:41 +0800) | |
DDR version: dc2e84f0. | |
Trying to boot from SPI | |
OpenSBI v1.2 | |
____ _____ ____ _____ | |
/ __ \ / ____| _ \_ _| | |
| | | |_ __ ___ _ __ | (___ | |_) || | | |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |
| |__| | |_) | __/ | | |____) | |_) || |_ | |
\____/| .__/ \___|_| |_|_____/|____/_____| | |
| | | |
|_| | |
Platform Name : StarFive VisionFive V2 | |
Platform Features : medeleg | |
Platform HART Count : 5 | |
Platform IPI Device : aclint-mswi | |
Platform Timer Device : aclint-mtimer @ 4000000Hz | |
Platform Console Device : uart8250 | |
Platform HSM Device : jh7110-hsm | |
Platform PMU Device : --- | |
Platform Reboot Device : pm-reset | |
Platform Shutdown Device : pm-reset | |
Firmware Base : 0x40000000 | |
Firmware Size : 288 KB | |
Runtime SBI Version : 1.0 | |
Domain0 Name : root | |
Domain0 Boot HART : 1 | |
Domain0 HARTs : 0*,1*,2*,3*,4* | |
Domain0 Region00 : 0x0000000002000000-0x000000000200ffff (I) | |
Domain0 Region01 : 0x0000000040000000-0x000000004007ffff () | |
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X) | |
Domain0 Next Address : 0x0000000040200000 | |
Domain0 Next Arg1 : 0x0000000042200000 | |
Domain0 Next Mode : S-mode | |
Domain0 SysReset : yes | |
Boot HART ID : 1 | |
Boot HART Domain : root | |
Boot HART Priv Version : v1.11 | |
Boot HART Base ISA : rv64imafdcbx | |
Boot HART ISA Extensions : none | |
Boot HART PMP Count : 8 | |
Boot HART PMP Granularity : 4096 | |
Boot HART PMP Address Bits: 34 | |
Boot HART MHPM Count : 2 | |
Boot HART MIDELEG : 0x0000000000000222 | |
Boot HART MEDELEG : 0x000000000000b109 | |
U-Boot 2021.10 (Jan 19 2023 - 04:09:41 +0800), Build: jenkins-github_visionfive2-6 | |
CPU: rv64imacu | |
Model: StarFive VisionFive V2 | |
DRAM: 8 GiB | |
MMC: sdio0@16010000: 0, sdio1@16020000: 1 | |
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
*** Warning - bad CRC, using default environment | |
StarFive EEPROM format v2 | |
--------EEPROM INFO-------- | |
Vendor : PINE64 | |
Product full SN: STAR64V1-2310-D008E000-00000003 | |
data version: 0x2 | |
PCB revision: 0xc1 | |
BOM revision: A | |
Ethernet MAC0 address: 6c:cf:39:00:75:5d | |
Ethernet MAC1 address: 6c:cf:39:00:75:5e | |
--------EEPROM INFO-------- | |
In: serial@10000000 | |
Out: serial@10000000 | |
Err: serial@10000000 | |
Model: StarFive VisionFive V2 | |
Net: eth0: ethernet@16030000, eth1: ethernet@16040000 | |
switch to partitions #0, OK | |
mmc1 is current device | |
found device 1 | |
bootmode flash device 1 | |
** Invalid partition 3 ** | |
Couldn't find partition mmc 1:3 | |
Can't set block device | |
** Invalid partition 3 ** | |
Couldn't find partition mmc 1:3 | |
Can't set block device | |
Hit any key to stop autoboot: 2 1 0 | |
** Invalid partition 3 ** | |
Couldn't find partition mmc 1:3 | |
Can't set block device | |
Importing environment from mmc1 ... | |
## Warning: Input data exceeds 1048576 bytes - truncated | |
## Info: input data size = 1048578 = 0x100002 | |
** Invalid partition 2 ** | |
Couldn't find partition mmc 1:2 | |
Can't set block device | |
## Warning: defaulting to text format | |
## Error: "boot2" not defined | |
switch to partitions #0, OK | |
mmc1 is current device | |
Scanning mmc 1:1... | |
Found /boot/extlinux/extlinux.conf | |
Retrieving file: /boot/extlinux/extlinux.conf | |
383 bytes read in 7 ms (52.7 KiB/s) | |
1:[6CArmbian | |
Retrieving file: /boot/uInitrd | |
10911538 bytes read in 466 ms (22.3 MiB/s) | |
Retrieving file: /boot/Image | |
22040576 bytes read in 936 ms (22.5 MiB/s) | |
append: root=UUID=99f62df4-be35-475c-99ef-2ba3f74fe6b5 console=ttyS0,115200n8 console=tty0 earlycon=sbi rootflags=data=writeback stmmaceth=chain_mode:1 rw rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 splash plymouth.ignore-serial-consoles | |
Retrieving file: /boot/dtb/starfive/jh7110-star64-pine64.dtb | |
Failed to load '/boot/dtb/starfive/jh7110-star64-pine64.dtb' | |
Skipping Armbian for failure retrieving FDT | |
SCRIPT FAILED: continuing... | |
libfdt fdt_check_header(): FDT_ERR_BADMAGIC | |
[H[26;120H | |
Card did not respond to voltage select! : -110 | |
No EFI system partition | |
ethernet@16030000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! | |
phy_startup() failed: -110FAILED: -110ethernet@16040000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! | |
phy_startup() failed: -110FAILED: -110ethernet@16030000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! | |
phy_startup() failed: -110FAILED: -110ethernet@16040000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! | |
phy_startup() failed: -110FAILED: -110StarFive # | |
StarFive # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment