Last active
August 7, 2023 08:31
-
-
Save lupyuen/eef8de0817ceed2072b2bacc925cdd96 to your computer and use it in GitHub Desktop.
NuttX Log for Star64 JH7110: Boot from MicroSD. See https://github.com/apache/nuttx/pull/10094
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ## NuttX Build for Star64 JH7110 based on | |
| ## https://github.com/apache/nuttx/tree/860571471da095948fa0c39ce8ac6593a1efbad7 | |
| ## https://github.com/apache/nuttx-apps/tree/ee71af840f543b067c72077ec7fe74c2c7153998 | |
| $ cd nuttx | |
| $ tools/configure.sh star64:nsh | |
| $ make | |
| $ riscv64-unknown-elf-objcopy -O binary nuttx nuttx.bin | |
| $ make export | |
| $ pushd ../apps | |
| $ tools/mkimport.sh -z -x ../nuttx/nuttx-export-*.tar.gz | |
| $ make import | |
| $ popd | |
| $ genromfs -f initrd -d ../apps/bin -V "NuttXBootVol" | |
| ## Create a Text File: nuttx.its | |
| << | |
| /dts-v1/; | |
| / { | |
| description = "NuttX FIT image"; | |
| #address-cells = <2>; | |
| images { | |
| vmlinux { | |
| description = "vmlinux"; | |
| data = /incbin/("./nuttx.bin"); | |
| type = "kernel"; | |
| arch = "riscv"; | |
| os = "linux"; | |
| load = <0x0 0x40200000>; | |
| entry = <0x0 0x40200000>; | |
| compression = "none"; | |
| }; | |
| ramdisk { | |
| description = "buildroot initramfs"; | |
| data = /incbin/("./initrd"); | |
| type = "ramdisk"; | |
| arch = "riscv"; | |
| os = "linux"; | |
| load = <0x0 0x46100000>; | |
| compression = "none"; | |
| hash-1 { | |
| algo = "sha256"; | |
| }; | |
| }; | |
| fdt { | |
| data = /incbin/("./jh7110-visionfive-v2.dtb"); | |
| type = "flat_dt"; | |
| arch = "riscv"; | |
| load = <0x0 0x46000000>; | |
| compression = "none"; | |
| hash-1 { | |
| algo = "sha256"; | |
| }; | |
| }; | |
| }; | |
| configurations { | |
| default = "nuttx"; | |
| nuttx { | |
| description = "NuttX"; | |
| kernel = "vmlinux"; | |
| fdt = "fdt"; | |
| loadables = "ramdisk"; | |
| }; | |
| }; | |
| }; | |
| >> | |
| $ sudo apt install u-boot-tools | |
| $ mkimage -f nuttx.its -A riscv -O linux -T flat_dt starfiveu.fit | |
| ## Download the microSD Image sdcard.img | |
| ## - https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v3.1.5/sdcard.img | |
| ## Write the downloaded image to a microSD Card with Balena Etcher or GNOME Disks. | |
| ## Copy the file starfiveu.fit from above and overwrite the file on the microSD Card. | |
| ## Boot Star64 with the microSD Card. | |
| NuttX Log: | |
| Script started on Mon Aug 7 16:27:21 2023 | |
| command: screen /dev/tty.usbserial-1420 115200 | |
| [?1049h[!p[?3;4l[4l>[4l[?1h=[0m(B[1;61r[H[2J[H[2J | |
| U-Boot SPL 2021.10 (Jan 19 2023 - 04:09:41 +0800) | |
| DDR version: dc2e84f0. | |
| Trying to boot from SPI | |
| OpenSBI v1.2 | |
| ____ _____ ____ _____ | |
| / __ \ / ____| _ \_ _| | |
| | | | |_ __ ___ _ __ | (___ | |_) || | | |
| | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |
| | |__| | |_) | __/ | | |____) | |_) || |_ | |
| \____/| .__/ \___|_| |_|_____/|____/_____| | |
| | | | |
| |_| | |
| Platform Name : StarFive VisionFive V2 | |
| Platform Features : medeleg | |
| Platform HART Count : 5 | |
| Platform IPI Device : aclint-mswi | |
| Platform Timer Device : aclint-mtimer @ 4000000Hz | |
| Platform Console Device : uart8250 | |
| Platform HSM Device : jh7110-hsm | |
| Platform PMU Device : --- | |
| Platform Reboot Device : pm-reset | |
| Platform Shutdown Device : pm-reset | |
| Firmware Base : 0x40000000 | |
| Firmware Size : 288 KB | |
| Runtime SBI Version : 1.0 | |
| Domain0 Name : root | |
| Domain0 Boot HART : 1 | |
| Domain0 HARTs : 0*,1*,2*,3*,4* | |
| Domain0 Region00 : 0x0000000002000000-0x000000000200ffff (I) | |
| Domain0 Region01 : 0x0000000040000000-0x000000004007ffff () | |
| Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X) | |
| Domain0 Next Address : 0x0000000040200000 | |
| Domain0 Next Arg1 : 0x0000000042200000 | |
| Domain0 Next Mode : S-mode | |
| Domain0 SysReset : yes | |
| Boot HART ID : 1 | |
| Boot HART Domain : root | |
| Boot HART Priv Version : v1.11 | |
| Boot HART Base ISA : rv64imafdcbx | |
| Boot HART ISA Extensions : none | |
| Boot HART PMP Count : 8 | |
| Boot HART PMP Granularity : 4096 | |
| Boot HART PMP Address Bits: 34 | |
| Boot HART MHPM Count : 2 | |
| Boot HART MIDELEG : 0x0000000000000222 | |
| Boot HART MEDELEG : 0x000000000000b109 | |
| U-Boot 2021.10 (Jan 19 2023 - 04:09:41 +0800), Build: jenkins-github_visionfive2-6 | |
| CPU: rv64imacu | |
| Model: StarFive VisionFive V2 | |
| DRAM: 8 GiB | |
| MMC: sdio0@16010000: 0, sdio1@16020000: 1 | |
| Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| OK | |
| StarFive EEPROM format v2 | |
| --------EEPROM INFO-------- | |
| Vendor : PINE64 | |
| Product full SN: STAR64V1-2310-D008E000-00000003 | |
| data version: 0x2 | |
| PCB revision: 0xc1 | |
| BOM revision: A | |
| Ethernet MAC0 address: 6c:cf:39:00:75:5d | |
| Ethernet MAC1 address: 6c:cf:39:00:75:5e | |
| --------EEPROM INFO-------- | |
| In: serial@10000000 | |
| Out: serial@10000000 | |
| Err: serial@10000000 | |
| Model: StarFive VisionFive V2 | |
| Net: eth0: ethernet@16030000, eth1: ethernet@16040000 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| found device 1 | |
| bootmode flash device 1 | |
| Failed to load 'uEnv.txt' | |
| Can't set block device | |
| Hit any key to stop autoboot: 2 1 0 | |
| 1579 bytes read in 5 ms (307.6 KiB/s) | |
| Importing environment from mmc1 ... | |
| Can't set block device | |
| ## Warning: defaulting to text format | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| 10232366 bytes read in 438 ms (22.3 MiB/s) | |
| ## Loading kernel from FIT Image at a0000000 ... | |
| Using 'nuttx' configuration | |
| Trying 'vmlinux' kernel subimage | |
| Description: vmlinux | |
| Type: Kernel Image | |
| Compression: uncompressed | |
| Data Start: 0xa00000b4 | |
| Data Size: 2097800 Bytes = 2 MiB | |
| Architecture: RISC-V | |
| OS: Linux | |
| Load Address: 0x40200000 | |
| Entry Point: 0x40200000 | |
| Verifying Hash Integrity ... OK | |
| ## Loading fdt from FIT Image at a0000000 ... | |
| Using 'nuttx' configuration | |
| Trying 'fdt' fdt subimage | |
| Description: unavailable | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0xa09b58bc | |
| Data Size: 50235 Bytes = 49.1 KiB | |
| Architecture: RISC-V | |
| Load Address: 0x46000000 | |
| Hash algo: sha256 | |
| Hash value: 42767c996f0544f513280805b41f996446df8b3956c656bdbb782125ae8ffeec | |
| Verifying Hash Integrity ... sha256+ OK | |
| Loading fdt from 0xa09b58bc to 0x46000000 | |
| Booting using the fdt blob at 0x46000000 | |
| ## Loading loadables from FIT Image at a0000000 ... | |
| Trying 'ramdisk' loadables subimage | |
| Description: buildroot initramfs | |
| Type: RAMDisk Image | |
| Compression: uncompressed | |
| Data Start: 0xa02003f0 | |
| Data Size: 8082432 Bytes = 7.7 MiB | |
| Architecture: RISC-V | |
| OS: Linux | |
| Load Address: 0x46100000 | |
| Entry Point: unavailable | |
| Hash algo: sha256 | |
| Hash value: 41cdaae1d74fbf5f03e1a9c52ca91a13b14efc3de12f6ad690cf7b45474703a7 | |
| Verifying Hash Integrity ... sha256+ OK | |
| Loading loadables from 0xa02003f0 to 0x46100000 | |
| Loading Kernel Image | |
| ## Error: "cpu_vol_set" not defined | |
| Booting kernel in | |
| ## Flattened Device Tree blob at 46000000 | |
| Booting using the fdt blob at 0x46000000 | |
| Using Device Tree in place at 0000000046000000, end 000000004600ffff | |
| Starting kernel ... | |
| clk u5_dw_i2c_clk_core already disabled | |
| clk u5_dw_i2c_clk_apb already disabled | |
| BC | |
| NuttShell (NSH) NuttX-12.2.1-RC0 | |
| nsh> | |
| nsh> uname -a | |
| NuttX 12.2.1-RC0 8605714 Aug 7 2023 16:20:45 risc-v star64 | |
| nsh> | |
| nsh> free | |
| total used free largest nused nfree | |
| Kmem: 2065400 14600 2050800 2049440 50 3 | |
| Page: 20971520 643072 20328448 20328448 | |
| nsh> | |
| nsh> ls -l | |
| /: | |
| dr--r--r-- 0 dev/ | |
| dr--r--r-- 0 proc/ | |
| dr--r--r-- 0 system/ | |
| nsh> | |
| nsh> help | |
| help usage: help [-v] [<cmd>] | |
| . break dd exit kill printf sleep uname | |
| [ cat df false ls ps source umount | |
| ? cd dmesg fdinfo mkdir pwd test unset | |
| alias cp echo free mkrd rm time uptime | |
| unalias cmp env help mount rmdir true usleep | |
| basename dirname exec hexdump mv set truncate xd | |
| nsh> | |
| nsh> ls -l /dev | |
| /dev: | |
| crw-rw-rw- 0 console | |
| crw-rw-rw- 0 null | |
| brw-rw-rw-16777216 ram0 | |
| crw-rw-rw- 0 ttyS0 | |
| crw-rw-rw- 0 zero | |
| nsh> | |
| nsh> ls -l /system | |
| /system: | |
| dr-xr-xr-x 0 bin/ | |
| nsh> | |
| nsh> ls -l /system/bin | |
| /system/bin: | |
| -r-xr-xr-x 895184 getprime | |
| -r-xr-xr-x 512432 hello | |
| -r-xr-xr-x 3346072 init | |
| -r-xr-xr-x 3327736 sh | |
| nsh> | |
| nsh> ls -l /system/bin/hello | |
| -r-xr-xr-x 512432 /system/bin/hello | |
| nsh> | |
| nsh> hello | |
| Hello, World!! | |
| nsh> | |
| nsh> getprime | |
| Set thread priority to 10 | |
| Set thread policy to SCHED_RR | |
| Start thread #0 | |
| thread #0 started, looking for primes < 10000, doing 10 run(s) | |
| thread #0 finished, found 1230 primes, last one was 9973 | |
| Done | |
| getprime took 0 msec | |
| nsh> | |
| nsh> | |
| Script done on Mon Aug 7 16:28:20 2023 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment