Created
July 18, 2022 03:50
-
-
Save lupyuen/f20fbfbf5d4f1103946a278b87b8bc3c to your computer and use it in GitHub Desktop.
C Sensor App for Apache NuttX RTOS: Run Log. See https://github.com/lupyuen/visual-zig-nuttx
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| gpio_pin_register: Registering /dev/gpio0 | |
| gpio_pin_register: Registering /dev/gpio1 | |
| gpint_enable: Disable the interrupt | |
| gpio_pin_register: Registering /dev/gpio2 | |
| bl602_gpio_set_intmod: ****gpio_pin=115, int_ctlmod=1, int_trgmod=0 | |
| bl602_spi_setfrequency: frequency=400000, actual=0 | |
| bl602_spi_setbits: nbits=8 | |
| bl602_spi_setmode: mode=0 | |
| spi_test_driver_register: devpath=/dev/spitest0, spidev=0 | |
| bl602_spi_select: devid: 0, CS: free | |
| bme280_register: devno=0 | |
| bme280_register: priv=0x4201b4b0, sensor_baro=0x4201b4b0, sensor_humi=0x4201b4cc | |
| bl602_i2c_transfer: subflag=1, subaddr=0xd0, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x60 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xd0, size=1, buf[0]=0x60 | |
| bme280_chip_init: ID OK | |
| bme280_reg_write: reg=0xe0, val=0xb6 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xb6e0, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x0 | |
| bl602_i2c_transfer: i2c transfer success | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x0 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x00 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x88, sublen=1 | |
| bl602_i2c_recvdata: count=24, temp=0x67366e56 | |
| bl602_i2c_recvdata: count=20, temp=0x8f370032 | |
| bl602_i2c_recvdata: count=16, temp=0xbd0d63f | |
| bl602_i2c_recvdata: count=12, temp=0xffa41a4e | |
| bl602_i2c_recvdata: count=8, temp=0x26acfff9 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0x88, size=24 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xa1, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x10bdd84b | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xa1, size=1, buf[0]=0x4b | |
| bl602_i2c_transfer: subflag=1, subaddr=0xe1, sublen=1 | |
| bl602_i2c_recvdata: count=7, temp=0x1300016e | |
| bl602_i2c_recvdata: count=3, temp=0x131e0006 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xe1, size=7 | |
| bme280_reg_write: reg=0xf2, val=0x05 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x5f2, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0005 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_write: reg=0xf4, val=0x57 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x57f4, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0057 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_write: reg=0xf5, val=0xa8 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xa8f5, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e00a8 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_chip_init: "BME280" OK | |
| bme280_reg_write: reg=0xf4, val=0x54 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x54f4, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0054 | |
| bl602_i2c_transfer: i2c transfer success | |
| sensor_custom_register: Registering /dev/sensor/baro0 | |
| sensor_custom_register: Registering /dev/sensor/humi0 | |
| bme280_register: BME280 driver loaded successfully! | |
| NuttShell (NSH) NuttX-10.3.0 | |
| nsh> sensortest -n 1 baro0 | |
| sensor_ioctl: cmd=a81 arg=4201c02c | |
| bme280_set_interval_baro: period_us=1000000 | |
| bme280_set_interval_baro: priv=0x4201b4b0, sensor_baro=0x4201b4b0 | |
| bme280_set_standby: value=5 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf5, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e00a8 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf5, size=1, buf[0]=0xa8 | |
| bme280_reg_write: reg=0xf5, val=0xa8 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xa8f5, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e00a8 | |
| bl602_i2c_transfer: i2c transfer success | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf5, sublen=1 | |
| bl602_ic_recvdata: count=1, temp=0x131e00a8 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf5, size=1, buf[0]=0xa8 | |
| sensor_ioctl: cmd=a82 arg=4201c030 | |
| sensor_ioctl: cmd=a80 arg=00000001 | |
| bme280_activate_baro: enable=1 | |
| bme280_activate_baro: priv=0x4201b4b0, sensor_baro=0x4201b4b0 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xd0, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0060 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xd0, size=1, buf[0]=0x60 | |
| bme280_chip_init: ID OK | |
| bme280_reg_write: reg=0xe0, val=0xb6 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xb6e0, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0000 | |
| bl602_i2c_transfer: i2c transfer success | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0000 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x00 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x88, sublen=1 | |
| bl602_i2c_recvdata: count=24, temp=0x67366e56 | |
| bl602_i2c_recvdata: count=20, temp=0x8f370032 | |
| bl602_i2c_recvdata: count=16, temp=0xbd0d63f | |
| bl602_i2c_recvdata: count=12, temp=0xffa41a4e | |
| bl602_i2c_recvdata: count=8, temp=0x26acfff9 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0x88, size=24 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xa1, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x10bdd84b | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xa1, size=1, buf[0]=0x4b | |
| bl602_i2c_transfer: subflag=1, subaddr=0xe1, sublen=1 | |
| bl602_i2c_recvdata: count=7, temp=0x1300016e | |
| bl602_i2c_recvdata: count=3, temp=0x131e0006 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xe1, size=7 | |
| bme280_reg_write: reg=0xf2, val=0x05 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x5f2, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0005 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_write: reg=0xf4, val=0x57 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x57f4, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0057 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_write: reg=0xf5, val=0xa8 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xa8f5, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e00a8 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_chip_init: "BME280" OK | |
| SensorTest: Test /dev/sensor/baro0 with interval(1000000us), latency(0us) | |
| sensor_pollnotify: Report events: 00000001 | |
| bme280_fetch_baro: buflen=16 | |
| bme280_fetch_baro: priv=0x4201b4b0, sensor_baro=0x4201b4b0 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e000c | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x0c | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e000c | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x0c | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0004 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x04 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf7, sublen=1 | |
| bl602_i2c_recvdata: count=8, temp=0x86d0a856 | |
| bl602_i2c_recvdata: count=4, temp=0xcd7e001f | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf7, size=8 | |
| bme280_fetch: temperature=30.690001 °C, pressure=1029.177368 mbar, humidity=72.257813 % | |
| baro0: timestamp:14280000 value1:1029.18 value2:30.69 | |
| SensorTest: Received message: baro0, number:1/1 | |
| sensor_ioctl: cmd=a80 arg=00000000 | |
| bme280_activate_baro: enable=0 | |
| bme280_activate_baro: priv=0x4201b4b0, sensor_baro=0x4201b4b0 | |
| bme280_reg_write: reg=0xf4, val=0x54 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x54f4, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0xcd7e0054 | |
| bl602_i2c_transfer: i2c transfer success | |
| nsh> sensortest -n 1 humi0 | |
| sensor_ioctl: cmd=a81 arg=4201c02c | |
| bme280_set_interval_humi: period_us=1000000 | |
| bme280_set_interval_humi: priv=0x4201b4b0, sensor_humi=0x4201b4cc | |
| bme280_set_standby: value=5 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf5, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0xcd7e00a8 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf5, size=1, buf[0]=0xa8 | |
| bme280_reg_write: reg=0xf5, val=0xa8 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xa8f5, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0xcd7e00a8 | |
| bl602_i2c_transfer: i2c transfer success | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf5, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0xcd7e00a8 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf5, size=1, buf[0]=0xa8 | |
| sensor_ioctl: cmd=a82 arg=4201c030 | |
| sensor_ioctl: cmd=a80 arg=00000001 | |
| bme280_activate_humi: enable=1 | |
| bme280_activate_humi: priv=0x4201b4b0, sensor_humi=0x4201b4cc | |
| bl602_i2c_transfer: subflag=1, subaddr=0xd0, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0xcd7e0060 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xd0, size=1, buf[0]=0x60 | |
| bme280_chip_init: ID OK | |
| bme280_reg_write: reg=0xe0, val=0xb6 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xb6e0, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0xcd7e0000 | |
| bl602_i2c_transfer: i2c transfer success | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0xcd7e0000 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x00 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x88, sublen=1 | |
| bl602_i2c_recvdata: count=24, temp=0x67366e56 | |
| bl602_i2c_recvdata: count=20, temp=0x8f370032 | |
| bl602_i2c_recvdata: count=16, temp=0xbd0d63f | |
| bl602_i2c_recvdata: count=12, temp=0xffa41a4e | |
| bl602_i2c_recvdata: count=8, temp=0x26acfff9 | |
| bl602_i2c_transfer: i2c transfer succes | |
| bme280_reg_read: start=0x88, size=24 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xa1, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x10bdd84b | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_regread: start=0xa1, size=1, buf[0]=0x4b | |
| bl602_i2c_transfer: subflag=1, subaddr=0xe1, sublen=1 | |
| bl602_i2c_recvdata: count=7, temp=0x1300016e | |
| bl602_i2c_recvdata: count=3, temp=0x131e0006 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xe1, size=7 | |
| bme280_reg_write: reg=0xf2, val=0x05 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x5f2, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0005 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_write: reg=0xf4, val=0x57 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x57f4, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0057 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_write: reg=0xf5, val=0xa8 | |
| bl602_i2c_transfer: subflag=1, subaddr=0xa8f5, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0x131e00a8 | |
| bl602_i2_transfer: i2c transfer success | |
| bme280_chip_init: "BME280" OK | |
| SensorTest: Test /dev/sensor/humi0 with interval(1000000us), latency(0us) | |
| sensor_pollnotify: Report events: 00000001 | |
| bme280_fetch_humi: buflen=16 | |
| bme280_fetch_humi: priv=0x4201b4b0, sensor_humi=0x4201b4cc | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e000c | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x0c | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e000c | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x0c | |
| bl602_i2c_transfer: subflag=1, subaddr=0xf3, sublen=1 | |
| bl602_i2c_recvdata: count=1, temp=0x131e0004 | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf3, size=1, buf[0]=0x04 | |
| bl602_2c_transfer: subflag=1, subaddr=0xf7, sublen=1 | |
| bl602_i2c_recvdata: count=8, temp=0x8690a756 | |
| bl602_i2c_recvdata: count=4, temp=0xd17e001f | |
| bl602_i2c_transfer: i2c transfer success | |
| bme280_reg_read: start=0xf7, size=8 | |
| bme280_fetch: temperature=30.690001 °C, pressure=1027.283447 mbar, humidity=72.280273 % | |
| humi0: timestamp:26000000 value:72.28 | |
| SensorTest: Received message: humi0, number:1/1 | |
| sensor_ioctl: cmd=a80 arg=00000000 | |
| bme280_activate_humi: enable=0 | |
| bme280_activate_humi: priv=0x4201b4b0, sensor_humi=0x4201b4cc | |
| bme280_reg_write: reg=0xf4, val=0x54 | |
| bl602_i2c_transfer: subflag=1, subaddr=0x54f4, sublen=2 | |
| bl602_i2c_recvdata: count=1, temp=0xd17e0054 | |
| bl602_i2c_transfer: i2c transfer success | |
| nsh> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment