Skip to content

Instantly share code, notes, and snippets.

@macromorgan

macromorgan/boot0

Last active April 1, 2024 20:26
Show Gist options
  • Save macromorgan/77a92a734c2029983ba1d6090d983a25 to your computer and use it in GitHub Desktop.
Save macromorgan/77a92a734c2029983ba1d6090d983a25 to your computer and use it in GitHub Desktop.
Download ZIP
RG35XXH+ Bootlog
Raw
boot0
@ 0: boot0: Allwinner boot0
size: 65536 bytes
eGON checksum matches: 0x311cf4a7
DRAM parameters: A64 H616
DRAM clock : 0x2a0 0x2a0 -
DRAM type : 0x8 0x8 -
ZQ value : 0x8080808 - -
ODT enabled : 0xe0e0e0e 0x7887bbbb -
DX ODT : - 0x8080808 -
DX DRI : - 0xe0e0e0e -
CA DRI : - 0xe0e -
PARA1 : 0xe0e 0x310a -
PARA2 : 0x7887bbbb 0 -
MR0 : 0x310a 0 -
MR1 : 0 0x34 -
MR2 : 0 0x1b -
MR3 : 0x34 0x33 -
MR4 : - 0x3 -
MR11 : - 0x4 -
MR12 : - 0x72 -
MR14 : - 0x9 -
MR22 : - 0x24 -
TPR0 : 0x1b 0 -
TPR1 : 0x33 0 -
TPR2 : 0x3 0x1 -
TPR5 : 0x4 - -
TPR6 : 0x72 0x40808080 -
TPR8 : 0x9 - -
TRP10 : 0 0x402f6633 -
TRP11 : 0x24 0 -
TRP13 : 0 0x2000c60 -
Raw
gpio
gpio-0 ( |GPIO Key a ) in hi
gpio-1 ( |GPIO Key b ) in hi
gpio-2 ( |GPIO Key y ) in hi
gpio-3 ( |GPIO Key x ) in hi
gpio-4 ( |GPIO Key start ) in hi
gpio-5 ( |GPIO Key select ) in hi
gpio-6 ( |GPIO Key Up ) in hi
gpio-7 ( |GPIO Key R2 ) in hi
gpio-8 ( |GPIO Key left ) in hi
gpio-9 ( |GPIO Key right ) in hi
gpio-10 ( |GPIO Key L1 ) in hi
gpio-11 ( |GPIO Key L2 ) in hi
gpio-12 ( |GPIO Key R1 ) in hi
gpio-128 ( |GPIO Key Down ) in hi
gpio-129 ( |GPIO Key Vol up ) in hi
gpio-130 ( |GPIO Key vol down ) in hi
gpio-131 ( |GPIO Key Menu ) in hi
gpio-132 ( |sdc2 power enable ) out hi
gpio-133 ( |allen_usb2_pwr_en ) out hi
gpio-136 ( |GPIO Key L3 ) in hi
gpio-137 ( |GPIO Key R3 ) in hi
gpio-139 ( |adc_en_gpios ) in lo
gpio-147 ( |? ) out hi
gpio-150 ( |cd ) in hi
gpio-166 ( |cd ) in lo
gpio-207 ( |wlan_hostwake ) in lo
gpio-208 ( |bt_hostwake ) in hi
gpio-209 ( |bt_wake ) out hi
gpio-210 ( |wlan_regon ) out hi
gpio-211 ( |bt_rst ) out hi
gpio-256 ( |amux-en ) out lo
gpio-257 ( |A0_gpio ) out hi
gpio-258 ( |A1_gpio ) out hi
gpio-259 ( |Headphone detection ) in lo
gpio-260 ( |usb_id_det ) in lo
gpio-261 ( |▒{▒>▒▒▒▒▒▒▒▒▒ ) out hi
gpio-262 ( |usb2_id_det ) in hi
gpio-263 ( |allen_usb2_vbus_en ) out hi
gpio-264 ( |? ) in hi
gpio-265 ( |? ) in hi
gpio-266 ( |? ) in hi
gpio-267 ( |low_pwr_led_ctl ) out lo
gpio-268 ( |work_led_ctl ) out hi
gpio-270 ( |? ) in hi
gpio-271 ( |? ) in hi
gpio-272 ( |? ) out lo
Raw
pinmux0
pin 0 (PA0): (MUX UNCLAIMED) pio:0
pin 1 (PA1): (MUX UNCLAIMED) pio:1
pin 2 (PA2): (MUX UNCLAIMED) pio:2
pin 3 (PA3): (MUX UNCLAIMED) pio:3
pin 4 (PA4): (MUX UNCLAIMED) pio:4
pin 5 (PA5): (MUX UNCLAIMED) pio:5
pin 6 (PA6): (MUX UNCLAIMED) pio:6
pin 7 (PA7): (MUX UNCLAIMED) pio:7
pin 8 (PA8): (MUX UNCLAIMED) pio:8
pin 9 (PA9): (MUX UNCLAIMED) pio:9
pin 10 (PA10): (MUX UNCLAIMED) pio:10
pin 11 (PA11): (MUX UNCLAIMED) pio:11
pin 12 (PA12): (MUX UNCLAIMED) pio:12
pin 64 (PC0): sdc2 (GPIO UNCLAIMED) function io_disabled group PC0
pin 65 (PC1): sdc2 (GPIO UNCLAIMED) function io_disabled group PC1
pin 66 (PC2): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 67 (PC3): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 68 (PC4): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 69 (PC5): sdc2 (GPIO UNCLAIMED) function io_disabled group PC5
pin 70 (PC6): sdc2 (GPIO UNCLAIMED) function io_disabled group PC6
pin 71 (PC7): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 72 (PC8): sdc2 (GPIO UNCLAIMED) function io_disabled group PC8
pin 73 (PC9): sdc2 (GPIO UNCLAIMED) function io_disabled group PC9
pin 74 (PC10): sdc2 (GPIO UNCLAIMED) function io_disabled group PC10
pin 75 (PC11): sdc2 (GPIO UNCLAIMED) function io_disabled group PC11
pin 76 (PC12): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 77 (PC13): sdc2 (GPIO UNCLAIMED) function io_disabled group PC13
pin 78 (PC14): sdc2 (GPIO UNCLAIMED) function io_disabled group PC14
pin 79 (PC15): sdc2 (GPIO UNCLAIMED) function io_disabled group PC15
pin 80 (PC16): sdc2 (GPIO UNCLAIMED) function io_disabled group PC16
pin 96 (PD0): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD0
pin 97 (PD1): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD1
pin 98 (PD2): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD2
pin 99 (PD3): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD3
pin 100 (PD4): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD4
pin 101 (PD5): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD5
pin 102 (PD6): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD6
pin 103 (PD7): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD7
pin 104 (PD8): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD8
pin 105 (PD9): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD9
pin 106 (PD10): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD10
pin 107 (PD11): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD11
pin 108 (PD12): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD12
pin 109 (PD13): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD13
pin 110 (PD14): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD14
pin 111 (PD15): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD15
pin 112 (PD16): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD16
pin 113 (PD17): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD17
pin 114 (PD18): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD18
pin 115 (PD19): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD19
pin 116 (PD20): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD20
pin 117 (PD21): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD21
pin 118 (PD22): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD22
pin 119 (PD23): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD23
pin 120 (PD24): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD24
pin 121 (PD25): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD25
pin 122 (PD26): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD26
pin 123 (PD27): soc@03000000:lcd0@01c0c000 (GPIO UNCLAIMED) function lcd0 group PD27
pin 124 (PD28): soc@03000000:pwm0@0300a000 (GPIO UNCLAIMED) function pwm0 group PD28
pin 128 (PE0): csi1 pio:128 function csi1 group PE0
pin 129 (PE1): (MUX UNCLAIMED) pio:129
pin 130 (PE2): csi1 pio:130 function csi1 group PE2
pin 131 (PE3): csi1 pio:131 function csi1 group PE3
pin 132 (PE4): csi1 pio:132 function csi1 group PE4
pin 133 (PE5): csi1 pio:133 function csi1 group PE5
pin 134 (PE6): csi1 (GPIO UNCLAIMED) function csi1 group PE6
pin 135 (PE7): csi1 (GPIO UNCLAIMED) function csi1 group PE7
pin 136 (PE8): csi1 pio:136 function csi1 group PE8
pin 137 (PE9): csi1 pio:137 function csi1 group PE9
pin 138 (PE10): csi1 (GPIO UNCLAIMED) function csi1 group PE10
pin 139 (PE11): csi1 pio:139 function csi1 group PE11
pin 140 (PE12): csi1 (GPIO UNCLAIMED) function csi1 group PE12
pin 141 (PE13): csi1 (GPIO UNCLAIMED) function csi1 group PE13
pin 142 (PE14): csi1 (GPIO UNCLAIMED) function csi1 group PE14
pin 143 (PE15): csi1 (GPIO UNCLAIMED) function csi1 group PE15
pin 144 (PE16): csi1 (GPIO UNCLAIMED) function csi1 group PE16
pin 145 (PE17): csi1 (GPIO UNCLAIMED) function csi1 group PE17
pin 146 (PE18): csi1 (GPIO UNCLAIMED) function csi1 group PE18
pin 147 (PE19): csi1 pio:147 function csi1 group PE19
pin 148 (PE20): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 149 (PE21): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 150 (PE22): (MUX UNCLAIMED) pio:150
pin 160 (PF0): sdc0 (GPIO UNCLAIMED) function sdc0 group PF0
pin 161 (PF1): sdc0 (GPIO UNCLAIMED) function sdc0 group PF1
pin 162 (PF2): sdc0 (GPIO UNCLAIMED) function sdc0 group PF2
pin 163 (PF3): sdc0 (GPIO UNCLAIMED) function sdc0 group PF3
pin 164 (PF4): sdc0 (GPIO UNCLAIMED) function sdc0 group PF4
pin 165 (PF5): sdc0 (GPIO UNCLAIMED) function sdc0 group PF5
pin 166 (PF6): (MUX UNCLAIMED) pio:166
pin 192 (PG0): sdc1 (GPIO UNCLAIMED) function sdc1 group PG0
pin 193 (PG1): sdc1 (GPIO UNCLAIMED) function sdc1 group PG1
pin 194 (PG2): sdc1 (GPIO UNCLAIMED) function sdc1 group PG2
pin 195 (PG3): sdc1 (GPIO UNCLAIMED) function sdc1 group PG3
pin 196 (PG4): sdc1 (GPIO UNCLAIMED) function sdc1 group PG4
pin 197 (PG5): sdc1 (GPIO UNCLAIMED) function sdc1 group PG5
pin 198 (PG6): uart1 (GPIO UNCLAIMED) function uart1 group PG6
pin 199 (PG7): uart1 (GPIO UNCLAIMED) function uart1 group PG7
pin 200 (PG8): uart1 (GPIO UNCLAIMED) function uart1 group PG8
pin 201 (PG9): uart1 (GPIO UNCLAIMED) function uart1 group PG9
pin 202 (PG10): soc@03000000:wlan (GPIO UNCLAIMED) function x32kfout group PG10
pin 203 (PG11): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 204 (PG12): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 205 (PG13): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 206 (PG14): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 207 (PG15): (MUX UNCLAIMED) pio:207
pin 208 (PG16): (MUX UNCLAIMED) pio:208
pin 209 (PG17): (MUX UNCLAIMED) pio:209
pin 210 (PG18): (MUX UNCLAIMED) pio:210
pin 211 (PG19): (MUX UNCLAIMED) pio:211
pin 224 (PH0): uart0 (GPIO UNCLAIMED) function uart0 group PH0
pin 225 (PH1): uart0 (GPIO UNCLAIMED) function uart0 group PH1
pin 226 (PH2): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 227 (PH3): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 228 (PH4): twi3 (GPIO UNCLAIMED) function twi3 group PH4
pin 229 (PH5): twi3 (GPIO UNCLAIMED) function twi3 group PH5
pin 230 (PH6): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 231 (PH7): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 232 (PH8): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 233 (PH9): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 234 (PH10): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 256 (PI0): (MUX UNCLAIMED) pio:256
pin 257 (PI1): (MUX UNCLAIMED) pio:257
pin 258 (PI2): (MUX UNCLAIMED) pio:258
pin 259 (PI3): (MUX UNCLAIMED) pio:259
pin 260 (PI4): (MUX UNCLAIMED) pio:260
pin 261 (PI5): (MUX UNCLAIMED) pio:261
pin 262 (PI6): (MUX UNCLAIMED) pio:262
pin 263 (PI7): (MUX UNCLAIMED) pio:263
pin 264 (PI8): (MUX UNCLAIMED) pio:264
pin 265 (PI9): (MUX UNCLAIMED) pio:265
pin 266 (PI10): (MUX UNCLAIMED) pio:266
pin 267 (PI11): (MUX UNCLAIMED) pio:267
pin 268 (PI12): (MUX UNCLAIMED) pio:268
pin 269 (PI13): (MUX UNCLAIMED) (GPIO UNCLAIMED)
pin 270 (PI14): (MUX UNCLAIMED) pio:270
pin 271 (PI15): (MUX UNCLAIMED) pio:271
pin 272 (PI16): (MUX UNCLAIMED) pio:272
Raw
pinmux1
pin 352 (PL0): twi5 (GPIO UNCLAIMED) function s_twi0 group PL0
pin 353 (PL1): twi5 (GPIO UNCLAIMED) function s_twi0 group PL1
Raw
regulator_summary
axp2202-dcdc1 0 2 0 1160mV 0mA 500mV 1540mV
cpu0 1160mV 1160mV
reg-virt-consumer.0.auto 0mV 0mV
axp2202-dcdc2 0 1 0 940mV 0mA 500mV 3400mV
reg-virt-consumer.1.auto 0mV 0mV
axp2202-dcdc3 0 1 0 1100mV 0mA 500mV 1840mV
reg-virt-consumer.2.auto 0mV 0mV
axp2202-dcdc4 0 1 0 1000mV 0mA 1000mV 3700mV
reg-virt-consumer.3.auto 0mV 0mV
axp2202-aldo1 0 2 0 1800mV 0mA 500mV 3500mV
sdc2 0mV 0mV
reg-virt-consumer.4.auto 0mV 0mV
axp2202-aldo2 0 1 0 1800mV 0mA 500mV 3500mV
reg-virt-consumer.5.auto 0mV 0mV
axp2202-aldo3 0 1 0 1800mV 0mA 500mV 3500mV
reg-virt-consumer.6.auto 0mV 0mV
axp2202-aldo4 0 2 0 1800mV 0mA 500mV 3500mV
5096000.codec 1800mV 1800mV
reg-virt-consumer.7.auto 0mV 0mV
axp2202-bldo1 0 1 0 1800mV 0mA 500mV 3500mV
reg-virt-consumer.8.auto 0mV 0mV
axp2202-bldo2 0 1 0 1800mV 0mA 500mV 3500mV
reg-virt-consumer.9.auto 0mV 0mV
axp2202-bldo3 0 1 0 2800mV 0mA 500mV 3500mV
reg-virt-consumer.10.auto 0mV 0mV
axp2202-bldo4 0 1 0 1200mV 0mA 500mV 3500mV
reg-virt-consumer.11.auto 0mV 0mV
axp2202-cldo1 1 2 0 3300mV 0mA 500mV 3500mV
5096000.codec 3300mV 3300mV
reg-virt-consumer.12.auto 0mV 0mV
axp2202-cldo2 0 1 0 3300mV 0mA 500mV 3500mV
reg-virt-consumer.13.auto 0mV 0mV
axp2202-cldo3 0 1 0 3300mV 0mA 500mV 3500mV
reg-virt-consumer.14.auto 0mV 0mV
axp2202-cldo4 1 1 0 3300mV 0mA 500mV 3500mV
reg-virt-consumer.15.auto 0mV 0mV
axp2202-rtcldo 0 1 0 1800mV 0mA 1800mV 1800mV
reg-virt-consumer.16.auto 0mV 0mV
axp2202-cpusldo 0 1 0 900mV 0mA 500mV 1400mV
reg-virt-consumer.17.auto 0mV 0mV
axp2202-vmid 0 0 0 0mV 0mA 0mV 0mV
axp2202-drivevbus 0 0 0 0mV 0mA 0mV 0mV
Raw
uart-bootlog
[37]HELLO! BOOT0 is starting!
[40]BOOT0 commit : 749c1f9a-dirty
[43]set pll start
[45]periph0 has been enabled
[49]set pll end
[50][pmu]: bus read error
[53][pmu]: bus read error
[55]PMU: AXP2202
[64]vaild para:8 select dram para0
[67]board init ok
[69]rtc[1] value = 0x4801b400
[72]rtc[2] value = 0x11000004
[75]DRAM BOOT DRIVE INFO: V0.651
[78]the chip id is 0x6c00
[81]chip id check OK
[83]DRAM_VCC set to 1100 mv
[86][DST] Dram DST Loop1
[110]read_calibration error
[124]read_calibration error
[138]read_calibration error
[152]read_calibration error
[166]read_calibration error
[180]read_calibration error
[193]read_calibration error
[207]read_calibration error
[221]read_calibration error
[235]read_calibration error
[238]retraining final error
[254][AUTO DEBUG]32bit,1 ranks training success!
[415][DST] Lclk,0x00008888,Memtest Pass
[419][DST] Clk =672 MHz
[421][DST] R_2d
[1600][DST] R_2d_hv_D2:0x18-0x64,0x4d(332mV),0
[1605][DST] R_2d_hv_D2:0x30~0x4c,0x3e
[1608][DST] R_2d tpr6 = 0x3e808080
[1619][DST] R_1st
[1635][DST] DB0 R_1st:3,0~26,27,0x07
[1652][DST] DB1 R_1st:3,0~26,27,0x07
[1670][DST] DB2 R_1st:3,0~25,26,0x06
[1687][DST] DB3 R_1st:3,0~25,26,0x06
[1690][DST] R_1st Tpr12 = 0x06060707
[1694][DST] W_2st
[1779][DST] DB0 W_2st:0,16~40,25,0x1c
[1841][DST] DB1 W_2st:0,19~42,24,0x1e
[1906][DST] DB2 W_2st:0,19~44,26,0x1f
[1964][DST] DB3 W_2st:0,16~40,25,0x1c
[1967][DST] W_2st Tpr11 = 0x1c1f1e1c
[1971][DST] R_2st
[2003][DST] DB0 R_2st:3,0~25,26,0x06
[2037][DST] DB1 R_2st:3,0~25,26,0x06
[2067][DST] DB2 R_2st:3,0~22,23,0x05
[2100][DST] DB3 R_2st:3,0~23,24,0x05
[2104][DST] R_2st Tpr12 = 0x05050606
[2268][DST] RV_C, VW:0x38-0x44, DW:120ps
[2365][DST] Dram DST Success
[2368]DRAM CLK =672 MHZ
[2370]DRAM Type =8 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4)
[2382]Actual DRAM SIZE =1024 M
[2385]DRAM SIZE =1024 MBytes, para1 = 30fa, para2 = 4000000, dram_tpr13 = 2006c61
[2399]DRAM simple test OK.
[2401]rtc standby flag is 0x0, super standby flag is 0x0
[2407]dram size =1024
[2409]key press :
[2412]card no is 0
[2414]sdcard 0 line count 4
[2416][mmc]: mmc driver ver 2021-10-12 13:56
[2421][mmc]: b mmc 0 bias 0
[2429][mmc]: Wrong media type 0x0
[2432][mmc]: ***Try SD card 0***
[2442][mmc]: HSSDR52/SDR25 4 bit
[2445][mmc]: 50000000 Hz
[2448][mmc]: 59638 MB
[2450][mmc]: ***SD/MMC 0 init OK!!!***
[2560]Loading boot-pkg Succeed(index=0).
[2564][mmc]: b mmc 0 bias 0
[2567]Entry_name = u-boot
[2577]Entry_name = monitor
[2581]Entry_name = dtbo
[2584]Entry_name = dtb
[2588]Jump to second Boot.
NOTICE: BL3-1: v1.0(debug):335ab35
NOTICE: BL3-1: Built : 14:03:48, 2023-12-07
NOTICE: BL3-1 commit: 8
NOTICE: cpuidle init version V2.0
ERROR: Error initializing runtime service tspd_fast
NOTICE: BL3-1: Preparing for EL3 exit to normal world
NOTICE: BL3-1: Next image address = 0x4a000000
▒OTICE: BL3-1: Next image spsr = 0x1d3
U-Boot 2018.05 (Dec 19 2023 - 22:45:47 +0800) Allwinner Technology
[02.673]CPU: Allwinner Family
[02.676]Model: sun50iw9
I2C: ready
[02.680]DRAM: 1 GiB
[02.684]Relocation Offset is: 35eba000
[02.731]secure enable bit: 0
[02.734]pmu_axp152_probe pmic_bus_read fail
[02.738]pmu_axp1530_probe pmic_bus_read fail
[02.742]PMU: AXP2202
[02.745]BMU: AXP2202
[02.747][AXP2202] comm status : 0x0 = 0x39, 0x1 = 0xb2
[02.752][AXP2202] onoff status: 0x20 = 0x0, 0x21 = 0x0
AXP2202_IIN_LIM:38
AXP2202_IIN_LIM:38
[02.763][axp][err]:
b12_mode: 0
AXP2202_IIN_LIM:38
FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL
[02.796]battery_check pass:radio:68, vol:4005
[02.801]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz
[02.809]drv_disp_init
[02.844]__clk_enable: clk is null.
[02.850]drv_disp_init finish
[02.852]gic: sec monitor mode
[02.885]flash init start
[02.887]workmode = 0,storage type = 1
[02.890]MMC: 0
[02.892][mmc]: mmc driver ver uboot2018:2021-07-19 14:09:00
[02.898][mmc]: get sdc_type fail and use default host:tm1.
[02.909][mmc]: Using default timing para
[02.912][mmc]: SUNXI SDMMC Controller Version:0x40200
[02.930][mmc]: card_caps:0x3000000a
[02.933][mmc]: host_caps:0x3000003f
[02.937]sunxi flash init ok
[02.941]Loading Environment from SUNXI_FLASH... OK
[02.958]out of usb burn from boot: not need burn key
[02.963]boot_gui_init:start
partno erro : can't find partition Reserve0
[02.975]Get Reserve0 partition number fail!
tcon_de_attach:de=0,tcon=0===LCD_power_on:178
--allen--data0 = 192
[02.990]boot_gui_init:finish
[02.994]bmp_name=bootlogo.bmp
partno erro : can't find partition bootloader
===lcd_panel_uboot_fj035fhd05_v1_init:261 lcd_type = 0
921654 bytes read in 185 ms (4.8 MiB/s)
[03.201]Item0 (Map) magic is bad
[03.204]the secure storage item0 copy0 magic is bad
[03.209]Item0 (Map) magic is bad
[03.211]the secure storage item0 copy1 magic is bad
[03.216]Item0 (Map) magic is bad
[03.222]update dts
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
partno erro : can't find partition private
[03.292]update part info
[03.303]update bootcmd
[03.305]No ethernet found.
Hit any key to stop autoboot: 0
===LCD_bl_open:197
[03.346]LCD open finish
Android's image name: sun50i_arm64
[04.236]Starting kernel ...
[04.239][mmc]: MMC Device 2 not found
[04.242][mmc]: mmc 2 not find, so not exit
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.170 (cc@cc-H81M-S1) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #254 SMP PREEMPT Tue Dec 19 15:45:52 CST 2023
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] allen_boe_lcd=0, str=old
[ 0.081607] BOOTEVENT: 81.602957: ON
[ 0.590028] axp2101-regulator axp2101-regulator.0: Setting DCDC frequency for unsupported AXP variant
[ 0.590400] axp2101-regulator axp2101-regulator.0: Error setting dcdc frequency: -22
[ ▒[ 1.027215] uart uart1: get regulator failed
[ 1.053666] [NAND][NE] Not found valid nand node on dts
[ 1.061736] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed
[ 1.068619] sunxi-wlan soc@03000000:wlan: get gpio power_en failed
[ 1.176039] hci: request ohci0-controller gpio:272
[ 1.181792] hci: request ohci1-controller gpio:147
[ 1.401334] --[allen]-- sunxi_gpadc_probe: 321
[ 1.406532] ---[allen] sunxi_gpadc_probe: allen_gpadc_enable_flg=1
[ 1.424704] VE: get debugfs_mpp_root is NULL, please check mpp
[ 1.424704]
[ 1.432928] VE: sunxi ve debug register driver failed!
[ 1.432928]
[ 1.444351] axp2202_usb_power: axp2202-acin device is not configed, not use vbus-det
[ 1.444351]
[ 1.625522] mmc:failed to get gpios
[ 1.684881] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[ 1.691701] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[ 1.702105] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 1.708800] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 1.715490] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 1.722182] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 1.735084] ERROR: pinctrl_get for HDMI2.0 DDC fail
[ 1.758169] cpu cpu1: opp_list_debug_create_link: Failed to create link
[ 1.765734] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
[ 1.773304] cpu cpu2: opp_list_debug_create_link: Failed to create link
[ 1.780764] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
[ 1.788356] cpu cpu3: opp_list_debug_create_link: Failed to create link
[ 1.795814] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
[ 1.852839] [sound 402][CODEC-HDMI sunxi_codec_dev_probe] register codec-hdmi success
[ 1.862589] [asoc_simple_probe, 432]
[ 1.868199] [asoc_simple_probe, 432]
[ 1.872975] [asoc_simple_probe, 432]
[ 1.877084] [asoc_simple_probe, 432]
[ 1.882373] [asoc_simple_probe, 432]
▒[/init]: getty is ttyS0
[/init]: RootDevice is "/dev/mmcblk0p5" , GPT_SUPPORT=1
[/init]: Try to load EMMC ...
e2fsck 1.42.12 (29-Aug-2014)
/dev/mmcblk0p5 has unsupported feature(s): metadata_csum
e2fsck: Get a newer version of e2fsck!
[ 2.546932] cgroup: cgroup2: unknown option "nsdelegate"
Welcome to Ubuntu 18.04.6 LTS!
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Remote File Systems.
[ OK ] Reached target Swap.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Created slice System Slice.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Reached target Slices.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Listening on Journal Socket.
Mounting Kernel Debug File System...
Starting Load Kernel Modules...
Starting Create Static Device Nodes in /dev...
[ 3.503993] [asoc_simple_probe, 432]
Starting Set the console keyboard layout...
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on udev Control Socket.
Starting udev Coldplug all Devices...
Starting Journal Service...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Local Encrypted Volumes.
Starting Remount Root and Kernel File Systems...
[ OK ] Started Journal Service.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Set the console keyboard layout.
[ OK ] Started Remount Root and Kernel File Systems.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Set console font and keymap...
Starting udev Kernel Device Manager...
Mounting FUSE Control File System...
Starting Apply Kernel Variables...
Mounting Kernel Configuration File System...
Starting Flush Journal to Persistent Storage...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Set console font and keymap.
[ OK ] Mounted FUSE Control File System.
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted Kernel Configuration File System.
Starting Raise network interfaces...
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[FAILED] Failed to start Create Volatile Files and Directories.
See 'systemctl status systemd-tmpfiles-setup.service' for details.
[ OK ] Started Raise network interfaces.
[ OK ] Found device /dev/ttyS0.
[ OK ] Reached target Sound Card.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Name Resolution...
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Started Update UTMP about System Boot/Shutdown.
Starting Load/Save RF Kill Switch Status...
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started Daily apt download activities.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Message of the Day.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting launcher.service...
[ OK ] Started Set the CPU Frequency Scaling governor.
Starting Save/Restore Sound Card State...
Starting Modem Manager...
Starting Restore /etc/resolv.conf i…fore the ppp link was shut down...
Starting Dispatcher daemon for systemd-networkd...
[ OK ] Started Regular background program processing daemon.
Starting Login Service...
[ OK ] Started D-Bus System Message Bus.
Starting Network Manager...
Starting WPA supplicant...
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Reached target Timers.
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started Network Name Resolution.
[ OK ] Started launcher.service.
[ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down.
[ OK ] Started Save/Restore Sound Card State.
[ OK ] Started Login Service.
[ OK ] Started WPA supplicant.
Starting Authorization Manager...
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Stopped Network Manager.
Starting Network Manager...
[ OK ] Started Authorization Manager.
Starting Hostname Service...
[ OK ] Started Dispatcher daemon for systemd-networkd.
[ OK ] Started Modem Manager.
[ OK ] Started Hostname Service.
[ OK ] Started Network Manager.
Starting Network Manager Script Dispatcher Service...
[ OK ] Reached target Network.
Starting /etc/rc.local Compatibility...
Starting Permit User Sessions...
[ OK ] Started Unattended Upgrades Shutdown.
[ OK ] Started Permit User Sessions.
[ OK ] Started Network Manager Script Dispatcher Service.
Starting Set console scheme...
[ OK ] Started Set console scheme.
[ OK ] Created slice system-getty.slice.
[ 8.354837] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[ 8.361672] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
Starting Bluetooth service...
[ 9.077491] [asoc_simple_probe, 432]
[ 9.103607] [asoc_simple_probe, 432]
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Bluetooth service.
[ OK ] Started Update UTMP about System Runlevel Changes.
[ 11.296108] Bluetooth: Non-link packet received in non-active state
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment