Tip
Microsoft active directory servers by default provide LDAP connections over unencrypted connections (boo!).
The steps below will create a new self signed certificate appropriate for use with and thus enabling LDAPS for an AD server. Of course the "self-signed" portion of this guide can be swapped out with a real vendor purchased certificate if required.
Steps have been tested successfully with Windows Server 2012R2, but should work with Windows Server 2008 without modification. Requires a working OpenSSL install (ideally Linux/OSX) and (obviously) a Windows Active Directory server.
- Create root certificate
- Import root certificate into trusted store of domain controller
- Create client certificate
- Accept and import certificate
- Reload active directory SSL certificate
- Test LDAPS using
ldp.exe
utility - Reference
Using OpenSSL, create new private key and root certificate. Answer country/state/org questions as suitable:
$ openssl genrsa -aes256 -out ca.key 4096
$ openssl req -new -x509 -days 3650 -key ca.key -out ca.crt
Hold onto the resulting ca.key
and ca.crt
.
- From the active directory server, open
Manage computer certificates
. - Add the generated
ca.crt
to the certificate pathTrusted Root Certification Authorities\Certificates
. - Done.
We will now create a client certificate to be used for LDAPS, signed against our generated root certificate.
From the active directory server:
-
Create a new
request.inf
definition with the following contents - replacingACTIVE_DIRECTORY_FQDN
with the qualified domain name of your active directory server:[Version] Signature="$Windows NT$" [NewRequest] Subject = "CN=ACTIVE_DIRECTORY_FQDN" KeySpec = 1 KeyLength = 2048 Exportable = TRUE MachineKeySet = TRUE SMIME = FALSE PrivateKeyArchive = FALSE UserProtected = FALSE UseExistingKeySet = FALSE ProviderName = "Microsoft RSA SChannel Cryptographic Provider" ProviderType = 12 RequestType = PKCS10 KeyUsage = 0xa0 [EnhancedKeyUsageExtension] OID = 1.3.6.1.5.5.7.3.1 ; Server Authentication
-
Run the following to create a client certificate request of
client.csr
(note: it's critical this is run from the active directory server itself to ensure correct private key -> certificate association):C:\> certreq -new request.inf client.csr
Back to our OpenSSL system:
-
Create
v3ext.txt
containing the following:keyUsage=digitalSignature,keyEncipherment extendedKeyUsage=serverAuth subjectKeyIdentifier=hash
-
Create a certificate
client.crt
from certificate requestclient.csr
and root certificate (with private key):$ openssl x509 \ -req -days 3650 \ -in client.csr -CA ca.crt -CAkey ca.key -extfile v3ext.txt \ -set_serial 01 -out client.crt
-
Verify generated certificate:
$ openssl x509 -in client.crt -text
-
Ensure the following
X509v3 extensions
are all present:X509v3 Key Usage: Digital Signature, Key Encipherment
X509v3 Extended Key Usage: TLS Web Server Authentication
X509v3 Subject Key Identifier
-
From the active directory server with
client.crt
present, run the following:C:\> certreq -accept client.crt
-
Open
Manage computer certificates
, the new certificate should now be present underPersonal\Certificates
. Ensure that:- Certificate has a private key association.
- The "Intended Purposes" is defined as "Server Authentication".
- Certificate name is the FQDN of the active directory server.
Alternatively you can just reboot the server, but this method will instruct the active directory server to simply reload a suitable SSL certificate and if found, enable LDAPS:
-
Create
ldap-renewservercert.txt
containing the following:dn: changetype: modify add: renewServerCertificate renewServerCertificate: 1 -
-
Run the following command:
C:\> ldifde -i -f ldap-renewservercert.txt
-
From another domain controller, firstly install our generated root certificate
ca.crt
to the certificate pathTrusted Root Certification Authorities\Certificates
. -
Open utility:
C:\> ldp.exe
-
From
Connection
, selectConnect
. -
Enter name of target domain controller.
-
Enter
636
as port number (this is the LDAPS port). -
Click
OK
to confirm the connection works. -
You're all done!
- Enable LDAP over SSL with a third-party certification authority: https://support.microsoft.com/en-us/kb/321051
- LDAP renewServerCertificate: https://msdn.microsoft.com/en-us/library/cc223311.aspx
- How to Enable LDAPS in Active Directory (similar outcome to above): https://www.javaxt.com/tutorials/windows/how_to_enable_ldaps_in_active_directory
- DigiCert LDAPS certificate install guide: https://www.digicert.com/ssl-certificate-installation-microsoft-active-directory-ldap-2012.htm
This is great, work very good and no problems. Thank you...