maisieccino/.Xresources

## .config-dunst-dunstrc
# <- this tricks vim into using syntax highlighting
[global]
    # font = Tewi 8
    font = "FontAwesome, Noto Sans 11"

    # allow a small subset of html markup:
    # <b>bold</b>
    # <i>italic</i>
    # <s>strikethrough<s/>
    # <u>underline</u>
    #
    # for a complete reference see http://developer.gnome.org/pango/stable/PangoMarkupFormat.html
    # If markup is not allowed, those tags will be stripped out of the message.
    allow_markup = yes

    # The format of the message. Possible variables are:
    #   %a  appname
    #   %s  summary
    #   %b  body
    #   %i  iconname (including its path)
    #   %I  iconname (without its path)
    #   %p  progress value if set ([  0%] to [100%]) or nothing
    # Markup is allowed
    format = "<b>  %s</b>\n%b"

    # Sort messages by urgency
    sort = yes

    # Show how many messages are currently hidden (because of geometry)
    indicate_hidden = yes

    # alignment of message text.
    # Possible values are "left", "center" and "right"
    alignment = center

    # The frequency with wich text that is longer than the notification
    # window allows bounces back and forth.
    # This option conflicts with 'word_wrap'.
    # Set to 0 to disable
    bounce_freq = 0

    # show age of message if message is older than show_age_threshold seconds.
    # set to -1 to disable
    show_age_threshold = 60

    # split notifications into multiple lines if they don't fit into geometry
    word_wrap = yes

    # ignore newlines '\n' in notifications
    ignore_newline = no


    # the geometry of the window
    # geometry [{width}]x{height}][+/-{x}+/-{y}]
    # The geometry of the message window.
    # The height is measured in number of notifications everything else in pixels. If the width
    # is omitted but the height is given ("-geometry x2"), the message window
    # expands over the whole screen (dmenu-like). If width is 0,
    # the window expands to the longest message displayed.
    # A positive x is measured from the left, a negative from the
    # right side of the screen.  Y is measured from the top and down respectevly.
    # The width can be negative. In this case the actual width is the
    # screen width minus the width defined in within the geometry option.
    geometry = "300x5+20-20"

    # The transparency of the window. range: [0; 100]
    # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
    transparency = 10

    # Don't remove messages, if the user is idle (no mouse or keyboard input)
    # for longer than idle_threshold seconds.
    # Set to 0 to disable.
    idle_threshold = 90

    # Which monitor should the notifications be displayed on.
    monitor = 0

    # Display notification on focused monitor. Possible modes are:
    # mouse: follow mouse pointer
    # keyboard: follow window with keyboard focus
    # none: don't follow anything
    #
    # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
    # This should be the case for almost all modern windowmanagers.
    #
    # If this option is set to mouse or keyboard, the monitor option will be
    # ignored.
    follow = mouse

    # should a notification popped up from history be sticky or
    # timeout as if it would normally do.
    sticky_history = yes

    # The height of a single line. If the height is smaller than the font height,
    # it will get raised to the font height.
    # This adds empty space above and under the text.
    line_height = 0

    # Draw a line of 'separatpr_height' pixel height between two notifications.
    # Set to 0 to disable
    separator_height = 2

    # padding between text and separator
    padding = 8

    # horizontal padding
    horizontal_padding = 8

    # Define a color for the separator.
    # possible values are:
    #  * auto: dunst tries to find a color fitting to the background
    #  * foreground: use the same color as the foreground
    #  * frame: use the same color as the frame.
    #  * anything else will be interpreted as a X color
    separator_color = frame

    # print a notification on startup
    # This is mainly for error detection, since dbus (re-)starts dunst
    # automatically after a crash.
    startup_notification = true

    # dmenu path
    dmenu = /usr/bin/dmenu -p dunst:

    # browser for opening urls in context menu
    browser = /usr/bin/firefox -new-tab

[frame]
    width = 2
    color = "#00c3ff"

[shortcuts]
    # shortcuts are specified as [modifier+][modifier+]...key
    # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
    # and 'mod4' (windows-key)
    # xev might be helpful to find names for keys

    # close notification
    close = ctrl+space

    # close all notifications
    close_all = ctrl+shift+space

    # redisplay last message(s)
    # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
    history = ctrl+grave

    # context menu
    context = ctrl+shift+period

[urgency_low]
    # IMPORTANT: colors have to be defined in quotation marks.
    # Otherwise the '#' and following  would be interpreted as a comment.
    background = "#1D596B"
    foreground = "#7BA8B5"
    timeout = 10

[urgency_normal]
    background = "#E3AD0B"
    foreground = "#524218"
    timeout = 10

[urgency_critical]
    background = "#BA3220"
    foreground = "#F0D1C5"
    timeout = 0


# Every section that isn't one of the above is interpreted as a rules
# to override settings for certain messages.
# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
# and you can override the 'timeout', 'urgency', 'foreground', 'background'
# and 'format'.
# Shell-like globbing will get expanded.
#
# SCRIPTING
# you can specify a script that gets run when the rule matches by setting
# the 'script' option.
# The script will be called as follows:
# script appname summary body icon urgency
# where urgency can be "LOW", "NORMAL" or "CRITICAL".
#
# NOTE: if you don't want a notification to be displayed, set the format to ""
# NOTE: It might be helpful to run dunst -print in a terminal in order to find
# fitting options for rules.

#[espeak]
#    summary = "*"
#    script = dunst_espeak.sh

#[script-test]
#    summary = "*script*"
#    script = dunst_test.sh

#[ignore]
## This notification will not be displayed
#    summary = "foobar"
#    format = ""

#[signed_on]
#    appname = Pidgin
#    summary = "*signed on*"
#    urgency = low
#
#[signed_off]
#    appname = Pidgin
#    summary = *signed off*
#    urgency = low
#
#[says]
#    appname = Pidgin
#    summary = *says*
#    urgency = critical
#
#[twitter]
#    appname = Pidgin
#    summary = *twitter.com*
#    urgency = normal

[scrot]
    summary = scrot
    format = "<b>  %s</b>\n%b"

[mopidy]
    summary = Mopidy
    appname = notify-send
    urgency = low
    format = "<b>  %s</b>\n%b"

[usb]
    summary = Automount
    format = "<b> %s</b>\n%b"

[slack]
    summary = Slack Notification
    format = "<b> %s</b>\n%b"

[weechat]
    appname = weechat
    format = "<b>  %s</b>\n%b"

## .config-termite-config
[options]
# font = Monaco for Powerline 9
font = Source Code Pro 9

[colors]
background = #263238
foreground = #eceff1
cursor     = #b3bfc7
color0     = #263238
color8     = #37474f
color1     = #ff9800
color9     = #ffa74d
color2     = #8bc34a
color10    = #9ccc65
color3     = #ffc107
color11    = #ffa000
color4     = #03a9f4
color12    = #81d4fa
color5     = #ea427b
color13    = #ad1457
color6     = #009688
color14    = #26a69a
color7     = #cfd8dc
color15    = #eceff1

## .i3blocks.conf
# i3blocks config file
#
# Please see man i3blocks for a complete reference!
# The man page is also hosted at http://vivien.github.io/i3blocks
#
# List of valid properties:
#
# align
# color
# command
# full_text
# instance
# interval
# label
# min_width
# name
# separator
# separator_block_width
# short_text
# signal
# urgent

# Global properties
#
# The top properties below are applied to every block, but can be overridden.
# Each block command defaults to the script name to avoid boilerplate.
command=/usr/libexec/i3blocks/$BLOCK_NAME
separator_block_width=15
markup=pango

[mediaplayer]
command=printf "<span font_family=\"FontAwesome\"></span> `./scripts/mediaplayer`"
#instance=mpd
interval=5
signal=10

# Volume indicator
#
# The first parameter sets the step (and units to display)
# The second parameter overrides the mixer selection
# See the script for details.
[volume]
command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/volume)"
#label=♪
instance=Master
#instance=PCM
interval=once
signal=10

# Memory usage
#
# The type defaults to "mem" if the instance is not specified.
[memory]
command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/$BLOCK_NAME)"
separator=false
interval=30

[memory]
label=SWAP
instance=swap
separator=false
interval=30

# Disk usage
#
# The directory defaults to $HOME if the instance is not specified.
# The script may be called with a optional argument to set the alert
# (defaults to 10 for 10%).
[disk]
command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/$BLOCK_NAME)"
#instance=/mnt/data
interval=30

# Network interface monitoring
#
# If the instance is not specified, use the interface used for default route.
# The address can be forced to IPv4 or IPv6 with -4 or -6 switches.
[iface]
#instance=wlan0
command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/$BLOCK_NAME)"
color=#569A4E
interval=10
separator=false

[wifi]
#instance=wlp3s0
interval=10
separator=false

[bandwidth]
command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/$BLOCK_NAME)"
#instance=eth0
interval=5

# CPU usage
#
# The script may be called with -w and -c switches to specify thresholds,
# see the script for details.
[cpu_usage]
label=CPU
interval=10
min_width=CPU: 10.00%
#separator=false

#[load_average]
#interval=10

# Battery indicator
#
# The battery instance defaults to 0.
[battery]
label=BAT
#label=⚡
#instance=1
interval=30

# Date Time
#
[time]
command=date '+%Y-%m-%d %H:%M:%S'
interval=5

# Generic media player support
#
# This displays "ARTIST - SONG" if a music is playing.
# Supported players are: spotify, vlc, audacious, xmms2, mplayer, and others.
#[mediaplayer]
#instance=spotify
#interval=5
#signal=10

# OpenVPN support
#
# Support multiple VPN, with colors.
#[openvpn]
#interval=20

# Temperature
#
# Support multiple chips, though lm-sensors.
# The script may be called with -w and -c switches to specify thresholds,
# see the script for details.
#[temperature]
#label=TEMP
#interval=10

# Key indicators
#
# Add the following bindings to i3 config file:
#
# bindsym --release Caps_Lock exec pkill -SIGRTMIN+11 i3blocks
# bindsym --release Num_Lock  exec pkill -SIGRTMIN+11 i3blocks
#[keyindicator]
#instance=CAPS
#interval=once
#signal=11

#[keyindicator]
#instance=NUM
#interval=once
#signal=11

## .Xresources
Xft.dpi: 96
Xft.antialias: true
Xft.hinting: true
Xft.rgba: rgb
Xft.hintstyle: hintslight
Xft.lcdfilter: lcddefault


URxvt.scrollBar: false
URxvt*transparent: false
URxvt*shading: 20
URxvt*fading: 20
URxvt*saveLines: 1000
URxvt*buffered:	false

URxvt.keysym.M-C-c:	perl:clipboard:copy
URxvt.keysym.M-C-v:	perl:clipboard:paste

!URxvt.font: -*-tewi-medium-*-*-*-11-150-*-*-*-*-*-*,\
!			-wuncon-siji-medium-r-normal--10-100-75-75-c-80-iso10646-1

URxvt.font: xft:Monaco for Powerline:size=8

URxvt*letterSpace:  -1

!URxvt*borderColor:	#151515
!URxvt*borderColor: #77c3a9
URxvt*borderLess:	false
URxvt*colorBD:		#ffffff

! special
*foreground:   #eceff1
*background:   #263238
*cursorColor:  #eceff1

! black
*color0:       #263238
*color8:       #37474f

! red
*color1:       #ff9800
*color9:       #ffa74d

! green
*color2:       #8bc34a
*color10:      #9ccc65

! yellow
*color3:       #ffc107
*color11:      #ffa000

! blue
*color4:       #03a9f4
*color12:      #81d4fa

! magenta
*color5:       #ea427b
*color13:      #ad1457

! cyan
*color6:       #009688
*color14:      #26a69a

! white
*color7:       #cfd8dc
*color15:      #eceff1


rofi.terminal:	urxvt
rofi.lines:		5
rofi.eh:		1
rofi.width:		100
rofi.padding:	480
rofi.opacity:	65
rofi.bw:		0
!rofi.bc:		#03a9f4
rofi.bc:		#C5CCD1
rofi.bg:		#eceff1
!rofi.fg:		#263238
!rofi.hlbg:		#03a9f4
!rofi.hlfg:		#eceff1
rofi.fg:		#C5CCD1
rofi.hlbg:		#eceff1
rofi.hlfg:		#263238
rofi.font:		Montserrat 24

## compton.conf
# Shadow
shadow = true;
no-dnd-shadow = true;
no-dock-shadow = false;
clear-shadow = true;
shadow-radius = 7;
shadow-offset-x = 0;
shadow-offset-y = -7;
# shadow-opacity = 0.7;
# shadow-red = 0.0;
# shadow-green = 0.0;
# shadow-blue = 0.0;
shadow-exclude = [
	"name = 'Notification'",
	"class_g ?= 'conky'",
	"class_g ?= 'Notify-osd'",
	"class_g = 'Cairo-clock'",
	"_GTK_FRAME_EXTENTS@:c"
];
#shadow-exclude = "n:e:Notification";
# shadow-exclude-reg = "x10+0+0";
# xinerama-shadow-crop = true;

# Opacity
menu-opacity = 1.0;
inactive-opacity = 1.0;
active-opacity = 1.0;
frame-opacity = 1;
inactive-opacity-override = false;
alpha-step = 0.09;
# inactive-dim = 0.2;
# inactive-dim-fixed = true;
# blur-background = true;
blur-background-frame = true;
blur-kern = "7x7box"
# blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"
blur-background-fixed = true;
blur-background-exclude = [
	"window_type = 'desktop'",
	"_GTK_FRAME_EXTENTS@:c"
];
# opacity-rule = [ "80:class_g = 'URxvt'" ];

# Fading
fading = true;
# fade-delta = 30;
fade-in-step = 0.1;
fade-out-step = 0.1;
# no-fading-openclose = true;
# no-fading-destroyed-argb = true;
fade-exclude = [ ];

# Other
backend = "xrender"
mark-wmwin-focused = true;
mark-ovredir-focused = true;
# use-ewmh-active-win = true;
detect-rounded-corners = true;
detect-client-opacity = true;
refresh-rate = 0;
vsync = "none";
dbe = false;
paint-on-overlay = true;
# sw-opti = true;
# unredir-if-possible = true;
# unredir-if-possible-delay = 5000;
# unredir-if-possible-exclude = [ ];
focus-exclude = [ "class_g = 'Cairo-clock'" ];
detect-transient = true;
detect-client-leader = true;
invert-color-include = [ ];
# resize-damage = 1;

# GLX backend
# glx-no-stencil = true;
glx-copy-from-front = false;
# glx-use-copysubbuffermesa = true;
# glx-no-rebind-pixmap = true;
glx-swap-method = "undefined";
# glx-use-gpushader4 = true;
# xrender-sync = true;
# xrender-sync-fence = true;

# Window type settings
wintypes:
{
  tooltip = { fade = true; shadow = true; opacity = 1.0; focus = true; };
};

## i3-config
set $foreground   #eceff1
set $background   #263238
set $color0       #263238
set $color8       #37474f
set $color1       #ff9800
set $color9       #ffa74d
set $color2       #8bc34a
set $color10      #9ccc65
set $color3       #ffc107
set $color11      #ffa000
set $color4       #03a9f4
set $color12      #81d4fa
set $color5       #ea427b
set $color13      #ad1457
set $color6       #009688
set $color14      #26a69a
set $color7       #cfd8dc
set $color15      #eceff1


set $FOCUS #18A4DB
set $UNFOCUS #127196
set $BORDERF #00c3FF
set $BORDERU #00245E

set $float exec --no-startup-id ~/.config/shadow_work_around.sh, floating toggle

# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!

set $mod Mod4

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
# font pango:Tewi Regular 8
font pango:FontAwesome 10, Montserrat 9

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8

# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.

# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod

#Wallpaper
exec --no-startup-id feh --bg-fill --no-xinerama ~/Pictures/Wallpapers/material/blue.jpg
#Compton
exec --no-startup-id compton -o 0.3 --backend glx --vsync opengl -b -i 1.0 --config ~/.config/compton.conf

#Gaps
gaps inner 10
gaps outer 10

# borders
#for_window [class="^.*"] border pixel 0
for_window [class="^.*"] border pixel 4
#new_window pixel 3
#new_float pixel 3

# start a terminal
# bindsym $mod+Return exec urxvt -sbg
bindsym $mod+Return exec termite

# kill focused window
bindsym $mod+Shift+q kill

# Menu
bindsym $mod+d exec rofi -show run
#bindsym $mod+d exec dmenu_run

# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right

# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+h split h

# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split

# toggle tiling / floating
#bindsym $mod+Shift+space floating toggle
bindsym $mod+Shift+space $float

# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle

# focus the parent container
bindsym $mod+a focus parent

# focus the child container
#bindsym $mod+d focus child

# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number 1
bindsym $mod+Shift+2 move container to workspace number 2
bindsym $mod+Shift+3 move container to workspace number 3
bindsym $mod+Shift+4 move container to workspace number 4
bindsym $mod+Shift+5 move container to workspace number 5
bindsym $mod+Shift+6 move container to workspace number 6
bindsym $mod+Shift+7 move container to workspace number 7
bindsym $mod+Shift+8 move container to workspace number 8
bindsym $mod+Shift+9 move container to workspace number 9
bindsym $mod+Shift+0 move container to workspace number 10

# MEDIA KEYS
bindsym --release $mod+p exec mpc toggle
bindsym --release $mod+Shift+period exec mpc next
bindsym --release $mod+Shift+comma exec mpc prev
bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume 0 -- +10% && killall -SIGUSR1 i3status
bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume 0 -- -10% && killall -SIGUSR1 i3status

# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym j resize shrink width 10 px or 10 ppt
        bindsym k resize grow height 10 px or 10 ppt
        bindsym l resize shrink height 10 px or 10 ppt
        bindsym semicolon resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left resize shrink width 10 px or 10 ppt
        bindsym Down resize grow height 10 px or 10 ppt
        bindsym Up resize shrink height 10 px or 10 ppt
        bindsym Right resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

bindsym $mod+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)


# colours				border      bg		  text	    indicator
client.focused 		  	$color12    $BORDERF  $FOCUS    $BORDERF
client.focused_inactive	$color12    $UNFOCUS  $UNFOCUS  $UNFOCUS
client.unfocused		$color4     $BORDERU  $UNFOCUS  $BORDERU
client.urgent			$color5     $FOCUS    $FOCUS    $FOCUS
client.background		$UNFOCUS


bar {
	i3bar_command i3bar -t
    status_command SCRIPT_DIR=/usr/libexec/i3blocks i3blocks
	position top
	colors {
	    background #eceff188
	    statusline #263238ff
	    separator #cfd8dcff
	    # colors           outline  background  number
	    focused_workspace	$color6  $color6    $color15
	    active_workspace	$color6  $color6  	$color15
	    inactive_workspace	$color7  $color7    $color6
	    urgent_workspace	$color13 $color13   $color15
	}
}

#BAR
#exec --no-startup-id conky -c ~/.config/conky/blank
#exec ~/.config/lemon/bar

#DUNST
exec dunst

#AUTOMATIC MOUNTING
exec --no-startup-id devmon --sync --exec-on-drive "notify-send 'Automount' '%l is now mounted at %d.'" --exec-on-remove "notify-send 'Automount' '%l has been removed.'"

#XSCREENSAVER
exec xscreensaver

set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
mode "$mode_system" {
    bindsym l exec --no-startup-id lock, mode "default"
    bindsym e exec --no-startup-id i3-msg exit, mode "default"
    bindsym s exec --no-startup-id lock && systemctl suspend, mode "default"
    bindsym h exec --no-startup-id lock && systemctl hibernate, mode "default"
    bindsym r exec --no-startup-id systemctl reboot, mode "default"
    bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default"

    # back to normal: Enter or Escape
    bindsym Return mode "default"
    bindsym Escape mode "default"
}

#bindsym $mod+Pause mode "$mode_system"
bindsym $mod+Pause exec --no-startup-id ~/scripts/power

#xflux
exec xflux -l 51.5333408

#screenshots
bindsym Print exec --no-startup-id scrot '~/Documents/scrots/auto/%Y-%m-%d_%H%M%S_scrot.png' -e 'notify-send "scrot" "Screenshot saved as $n"'

exec notify-send -a i3 "loaded" "Welcome to i3."
	# <- this tricks vim into using syntax highlighting
	[global]
	# font = Tewi 8
	font = "FontAwesome, Noto Sans 11"

	# allow a small subset of html markup:
	# <b>bold</b>
	# <i>italic</i>
	# <s>strikethrough<s/>
	# <u>underline</u>
	#
	# for a complete reference see http://developer.gnome.org/pango/stable/PangoMarkupFormat.html
	# If markup is not allowed, those tags will be stripped out of the message.
	allow_markup = yes

	# The format of the message. Possible variables are:
	# %a appname
	# %s summary
	# %b body
	# %i iconname (including its path)
	# %I iconname (without its path)
	# %p progress value if set ([ 0%] to [100%]) or nothing
	# Markup is allowed
	format = "<b> %s</b>\n%b"

	# Sort messages by urgency
	sort = yes

	# Show how many messages are currently hidden (because of geometry)
	indicate_hidden = yes

	# alignment of message text.
	# Possible values are "left", "center" and "right"
	alignment = center

	# The frequency with wich text that is longer than the notification
	# window allows bounces back and forth.
	# This option conflicts with 'word_wrap'.
	# Set to 0 to disable
	bounce_freq = 0

	# show age of message if message is older than show_age_threshold seconds.
	# set to -1 to disable
	show_age_threshold = 60

	# split notifications into multiple lines if they don't fit into geometry
	word_wrap = yes

	# ignore newlines '\n' in notifications
	ignore_newline = no


	# the geometry of the window
	# geometry [{width}]x{height}][+/-{x}+/-{y}]
	# The geometry of the message window.
	# The height is measured in number of notifications everything else in pixels. If the width
	# is omitted but the height is given ("-geometry x2"), the message window
	# expands over the whole screen (dmenu-like). If width is 0,
	# the window expands to the longest message displayed.
	# A positive x is measured from the left, a negative from the
	# right side of the screen. Y is measured from the top and down respectevly.
	# The width can be negative. In this case the actual width is the
	# screen width minus the width defined in within the geometry option.
	geometry = "300x5+20-20"

	# The transparency of the window. range: [0; 100]
	# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
	transparency = 10

	# Don't remove messages, if the user is idle (no mouse or keyboard input)
	# for longer than idle_threshold seconds.
	# Set to 0 to disable.
	idle_threshold = 90

	# Which monitor should the notifications be displayed on.
	monitor = 0

	# Display notification on focused monitor. Possible modes are:
	# mouse: follow mouse pointer
	# keyboard: follow window with keyboard focus
	# none: don't follow anything
	#
	# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
	# This should be the case for almost all modern windowmanagers.
	#
	# If this option is set to mouse or keyboard, the monitor option will be
	# ignored.
	follow = mouse

	# should a notification popped up from history be sticky or
	# timeout as if it would normally do.
	sticky_history = yes

	# The height of a single line. If the height is smaller than the font height,
	# it will get raised to the font height.
	# This adds empty space above and under the text.
	line_height = 0

	# Draw a line of 'separatpr_height' pixel height between two notifications.
	# Set to 0 to disable
	separator_height = 2

	# padding between text and separator
	padding = 8

	# horizontal padding
	horizontal_padding = 8

	# Define a color for the separator.
	# possible values are:
	# * auto: dunst tries to find a color fitting to the background
	# * foreground: use the same color as the foreground
	# * frame: use the same color as the frame.
	# * anything else will be interpreted as a X color
	separator_color = frame

	# print a notification on startup
	# This is mainly for error detection, since dbus (re-)starts dunst
	# automatically after a crash.
	startup_notification = true

	# dmenu path
	dmenu = /usr/bin/dmenu -p dunst:

	# browser for opening urls in context menu
	browser = /usr/bin/firefox -new-tab

	[frame]
	width = 2
	color = "#00c3ff"

	[shortcuts]
	# shortcuts are specified as [modifier+][modifier+]...key
	# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
	# and 'mod4' (windows-key)
	# xev might be helpful to find names for keys

	# close notification
	close = ctrl+space

	# close all notifications
	close_all = ctrl+shift+space

	# redisplay last message(s)
	# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
	history = ctrl+grave

	# context menu
	context = ctrl+shift+period

	[urgency_low]
	# IMPORTANT: colors have to be defined in quotation marks.
	# Otherwise the '#' and following would be interpreted as a comment.
	background = "#1D596B"
	foreground = "#7BA8B5"
	timeout = 10

	[urgency_normal]
	background = "#E3AD0B"
	foreground = "#524218"
	timeout = 10

	[urgency_critical]
	background = "#BA3220"
	foreground = "#F0D1C5"
	timeout = 0


	# Every section that isn't one of the above is interpreted as a rules
	# to override settings for certain messages.
	# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
	# and you can override the 'timeout', 'urgency', 'foreground', 'background'
	# and 'format'.
	# Shell-like globbing will get expanded.
	#
	# SCRIPTING
	# you can specify a script that gets run when the rule matches by setting
	# the 'script' option.
	# The script will be called as follows:
	# script appname summary body icon urgency
	# where urgency can be "LOW", "NORMAL" or "CRITICAL".
	#
	# NOTE: if you don't want a notification to be displayed, set the format to ""
	# NOTE: It might be helpful to run dunst -print in a terminal in order to find
	# fitting options for rules.

	#[espeak]
	# summary = "*"
	# script = dunst_espeak.sh

	#[script-test]
	# summary = "script"
	# script = dunst_test.sh

	#[ignore]
	## This notification will not be displayed
	# summary = "foobar"
	# format = ""

	#[signed_on]
	# appname = Pidgin
	# summary = "signed on"
	# urgency = low
	#
	#[signed_off]
	# appname = Pidgin
	# summary = signed off
	# urgency = low
	#
	#[says]
	# appname = Pidgin
	# summary = says
	# urgency = critical
	#
	#[twitter]
	# appname = Pidgin
	# summary = twitter.com
	# urgency = normal

	[scrot]
	summary = scrot
	format = "<b> %s</b>\n%b"

	[mopidy]
	summary = Mopidy
	appname = notify-send
	urgency = low
	format = "<b> %s</b>\n%b"

	[usb]
	summary = Automount
	format = "<b> %s</b>\n%b"

	[slack]
	summary = Slack Notification
	format = "<b> %s</b>\n%b"

	[weechat]
	appname = weechat
	format = "<b> %s</b>\n%b"
	[options]
	# font = Monaco for Powerline 9
	font = Source Code Pro 9

	[colors]
	background = #263238
	foreground = #eceff1
	cursor = #b3bfc7
	color0 = #263238
	color8 = #37474f
	color1 = #ff9800
	color9 = #ffa74d
	color2 = #8bc34a
	color10 = #9ccc65
	color3 = #ffc107
	color11 = #ffa000
	color4 = #03a9f4
	color12 = #81d4fa
	color5 = #ea427b
	color13 = #ad1457
	color6 = #009688
	color14 = #26a69a
	color7 = #cfd8dc
	color15 = #eceff1
	# i3blocks config file
	#
	# Please see man i3blocks for a complete reference!
	# The man page is also hosted at http://vivien.github.io/i3blocks
	#
	# List of valid properties:
	#
	# align
	# color
	# command
	# full_text
	# instance
	# interval
	# label
	# min_width
	# name
	# separator
	# separator_block_width
	# short_text
	# signal
	# urgent

	# Global properties
	#
	# The top properties below are applied to every block, but can be overridden.
	# Each block command defaults to the script name to avoid boilerplate.
	command=/usr/libexec/i3blocks/$BLOCK_NAME
	separator_block_width=15
	markup=pango

	[mediaplayer]
	command=printf "<span font_family=\"FontAwesome\"></span> `./scripts/mediaplayer`"
	#instance=mpd
	interval=5
	signal=10

	# Volume indicator
	#
	# The first parameter sets the step (and units to display)
	# The second parameter overrides the mixer selection
	# See the script for details.
	[volume]
	command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/volume)"
	#label=♪
	instance=Master
	#instance=PCM
	interval=once
	signal=10

	# Memory usage
	#
	# The type defaults to "mem" if the instance is not specified.
	[memory]
	command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/$BLOCK_NAME)"
	separator=false
	interval=30

	[memory]
	label=SWAP
	instance=swap
	separator=false
	interval=30

	# Disk usage
	#
	# The directory defaults to $HOME if the instance is not specified.
	# The script may be called with a optional argument to set the alert
	# (defaults to 10 for 10%).
	[disk]
	command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/$BLOCK_NAME)"
	#instance=/mnt/data
	interval=30

	# Network interface monitoring
	#
	# If the instance is not specified, use the interface used for default route.
	# The address can be forced to IPv4 or IPv6 with -4 or -6 switches.
	[iface]
	#instance=wlan0
	command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/$BLOCK_NAME)"
	color=#569A4E
	interval=10
	separator=false

	[wifi]
	#instance=wlp3s0
	interval=10
	separator=false

	[bandwidth]
	command=printf "<span font_family=\"FontAwesome\"></span> %s" "$(/usr/libexec/i3blocks/$BLOCK_NAME)"
	#instance=eth0
	interval=5

	# CPU usage
	#
	# The script may be called with -w and -c switches to specify thresholds,
	# see the script for details.
	[cpu_usage]
	label=CPU
	interval=10
	min_width=CPU: 10.00%
	#separator=false

	#[load_average]
	#interval=10

	# Battery indicator
	#
	# The battery instance defaults to 0.
	[battery]
	label=BAT
	#label=⚡
	#instance=1
	interval=30

	# Date Time
	#
	[time]
	command=date '+%Y-%m-%d %H:%M:%S'
	interval=5

	# Generic media player support
	#
	# This displays "ARTIST - SONG" if a music is playing.
	# Supported players are: spotify, vlc, audacious, xmms2, mplayer, and others.
	#[mediaplayer]
	#instance=spotify
	#interval=5
	#signal=10

	# OpenVPN support
	#
	# Support multiple VPN, with colors.
	#[openvpn]
	#interval=20

	# Temperature
	#
	# Support multiple chips, though lm-sensors.
	# The script may be called with -w and -c switches to specify thresholds,
	# see the script for details.
	#[temperature]
	#label=TEMP
	#interval=10

	# Key indicators
	#
	# Add the following bindings to i3 config file:
	#
	# bindsym --release Caps_Lock exec pkill -SIGRTMIN+11 i3blocks
	# bindsym --release Num_Lock exec pkill -SIGRTMIN+11 i3blocks
	#[keyindicator]
	#instance=CAPS
	#interval=once
	#signal=11

	#[keyindicator]
	#instance=NUM
	#interval=once
	#signal=11
	Xft.dpi: 96
	Xft.antialias: true
	Xft.hinting: true
	Xft.rgba: rgb
	Xft.hintstyle: hintslight
	Xft.lcdfilter: lcddefault


	URxvt.scrollBar: false
	URxvt*transparent: false
	URxvt*shading: 20
	URxvt*fading: 20
	URxvt*saveLines: 1000
	URxvt*buffered: false

	URxvt.keysym.M-C-c: perl:clipboard:copy
	URxvt.keysym.M-C-v: perl:clipboard:paste

	!URxvt.font: --tewi-medium----11-150------,\
	! -wuncon-siji-medium-r-normal--10-100-75-75-c-80-iso10646-1

	URxvt.font: xft:Monaco for Powerline:size=8

	URxvt*letterSpace: -1

	!URxvt*borderColor: #151515
	!URxvt*borderColor: #77c3a9
	URxvt*borderLess: false
	URxvt*colorBD: #ffffff

	! special
	*foreground: #eceff1
	*background: #263238
	*cursorColor: #eceff1

	! black
	*color0: #263238
	*color8: #37474f

	! red
	*color1: #ff9800
	*color9: #ffa74d

	! green
	*color2: #8bc34a
	*color10: #9ccc65

	! yellow
	*color3: #ffc107
	*color11: #ffa000

	! blue
	*color4: #03a9f4
	*color12: #81d4fa

	! magenta
	*color5: #ea427b
	*color13: #ad1457

	! cyan
	*color6: #009688
	*color14: #26a69a

	! white
	*color7: #cfd8dc
	*color15: #eceff1



	rofi.terminal: urxvt
	rofi.lines: 5
	rofi.eh: 1
	rofi.width: 100
	rofi.padding: 480
	rofi.opacity: 65
	rofi.bw: 0
	!rofi.bc: #03a9f4
	rofi.bc: #C5CCD1
	rofi.bg: #eceff1
	!rofi.fg: #263238
	!rofi.hlbg: #03a9f4
	!rofi.hlfg: #eceff1
	rofi.fg: #C5CCD1
	rofi.hlbg: #eceff1
	rofi.hlfg: #263238
	rofi.font: Montserrat 24
	# Shadow
	shadow = true;
	no-dnd-shadow = true;
	no-dock-shadow = false;
	clear-shadow = true;
	shadow-radius = 7;
	shadow-offset-x = 0;
	shadow-offset-y = -7;
	# shadow-opacity = 0.7;
	# shadow-red = 0.0;
	# shadow-green = 0.0;
	# shadow-blue = 0.0;
	shadow-exclude = [
	"name = 'Notification'",
	"class_g ?= 'conky'",
	"class_g ?= 'Notify-osd'",
	"class_g = 'Cairo-clock'",
	"_GTK_FRAME_EXTENTS@:c"
	];
	#shadow-exclude = "n:e:Notification";
	# shadow-exclude-reg = "x10+0+0";
	# xinerama-shadow-crop = true;

	# Opacity
	menu-opacity = 1.0;
	inactive-opacity = 1.0;
	active-opacity = 1.0;
	frame-opacity = 1;
	inactive-opacity-override = false;
	alpha-step = 0.09;
	# inactive-dim = 0.2;
	# inactive-dim-fixed = true;
	# blur-background = true;
	blur-background-frame = true;
	blur-kern = "7x7box"
	# blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"
	blur-background-fixed = true;
	blur-background-exclude = [
	"window_type = 'desktop'",
	"_GTK_FRAME_EXTENTS@:c"
	];
	# opacity-rule = [ "80:class_g = 'URxvt'" ];

	# Fading
	fading = true;
	# fade-delta = 30;
	fade-in-step = 0.1;
	fade-out-step = 0.1;
	# no-fading-openclose = true;
	# no-fading-destroyed-argb = true;
	fade-exclude = [ ];

	# Other
	backend = "xrender"
	mark-wmwin-focused = true;
	mark-ovredir-focused = true;
	# use-ewmh-active-win = true;
	detect-rounded-corners = true;
	detect-client-opacity = true;
	refresh-rate = 0;
	vsync = "none";
	dbe = false;
	paint-on-overlay = true;
	# sw-opti = true;
	# unredir-if-possible = true;
	# unredir-if-possible-delay = 5000;
	# unredir-if-possible-exclude = [ ];
	focus-exclude = [ "class_g = 'Cairo-clock'" ];
	detect-transient = true;
	detect-client-leader = true;
	invert-color-include = [ ];
	# resize-damage = 1;

	# GLX backend
	# glx-no-stencil = true;
	glx-copy-from-front = false;
	# glx-use-copysubbuffermesa = true;
	# glx-no-rebind-pixmap = true;
	glx-swap-method = "undefined";
	# glx-use-gpushader4 = true;
	# xrender-sync = true;
	# xrender-sync-fence = true;

	# Window type settings
	wintypes:
	{
	tooltip = { fade = true; shadow = true; opacity = 1.0; focus = true; };
	};
	set $foreground #eceff1
	set $background #263238
	set $color0 #263238
	set $color8 #37474f
	set $color1 #ff9800
	set $color9 #ffa74d
	set $color2 #8bc34a
	set $color10 #9ccc65
	set $color3 #ffc107
	set $color11 #ffa000
	set $color4 #03a9f4
	set $color12 #81d4fa
	set $color5 #ea427b
	set $color13 #ad1457
	set $color6 #009688
	set $color14 #26a69a
	set $color7 #cfd8dc
	set $color15 #eceff1



	set $FOCUS #18A4DB
	set $UNFOCUS #127196
	set $BORDERF #00c3FF
	set $BORDERU #00245E

	set $float exec --no-startup-id ~/.config/shadow_work_around.sh, floating toggle

	# This file has been auto-generated by i3-config-wizard(1).
	# It will not be overwritten, so edit it as you like.
	#
	# Should you change your keyboard layout some time, delete
	# this file and re-run i3-config-wizard(1).
	#

	# i3 config file (v4)
	#
	# Please see http://i3wm.org/docs/userguide.html for a complete reference!

	set $mod Mod4

	# Font for window titles. Will also be used by the bar unless a different font
	# is used in the bar {} block below.
	# font pango:Tewi Regular 8
	font pango:FontAwesome 10, Montserrat 9

	# This font is widely installed, provides lots of unicode glyphs, right-to-left
	# text rendering and scalability on retina/hidpi displays (thanks to pango).
	#font pango:DejaVu Sans Mono 8

	# Before i3 v4.8, we used to recommend this one as the default:
	# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
	# The font above is very space-efficient, that is, it looks good, sharp and
	# clear in small sizes. However, its unicode glyph coverage is limited, the old
	# X core fonts rendering does not support right-to-left and this being a bitmap
	# font, it doesn’t scale on retina/hidpi displays.

	# Use Mouse+$mod to drag floating windows to their wanted position
	floating_modifier $mod

	#Wallpaper
	exec --no-startup-id feh --bg-fill --no-xinerama ~/Pictures/Wallpapers/material/blue.jpg
	#Compton
	exec --no-startup-id compton -o 0.3 --backend glx --vsync opengl -b -i 1.0 --config ~/.config/compton.conf

	#Gaps
	gaps inner 10
	gaps outer 10

	# borders
	#for_window [class="^.*"] border pixel 0
	for_window [class="^.*"] border pixel 4
	#new_window pixel 3
	#new_float pixel 3

	# start a terminal
	# bindsym $mod+Return exec urxvt -sbg
	bindsym $mod+Return exec termite

	# kill focused window
	bindsym $mod+Shift+q kill

	# Menu
	bindsym $mod+d exec rofi -show run
	#bindsym $mod+d exec dmenu_run

	# change focus
	bindsym $mod+j focus left
	bindsym $mod+k focus down
	bindsym $mod+l focus up
	bindsym $mod+semicolon focus right

	# alternatively, you can use the cursor keys:
	bindsym $mod+Left focus left
	bindsym $mod+Down focus down
	bindsym $mod+Up focus up
	bindsym $mod+Right focus right

	# move focused window
	bindsym $mod+Shift+j move left
	bindsym $mod+Shift+k move down
	bindsym $mod+Shift+l move up
	bindsym $mod+Shift+semicolon move right

	# alternatively, you can use the cursor keys:
	bindsym $mod+Shift+Left move left
	bindsym $mod+Shift+Down move down
	bindsym $mod+Shift+Up move up
	bindsym $mod+Shift+Right move right

	# split in horizontal orientation
	bindsym $mod+h split h

	# split in vertical orientation
	bindsym $mod+v split v

	# enter fullscreen mode for the focused container
	bindsym $mod+f fullscreen toggle

	# change container layout (stacked, tabbed, toggle split)
	bindsym $mod+s layout stacking
	bindsym $mod+w layout tabbed
	bindsym $mod+e layout toggle split

	# toggle tiling / floating
	#bindsym $mod+Shift+space floating toggle
	bindsym $mod+Shift+space $float

	# change focus between tiling / floating windows
	bindsym $mod+space focus mode_toggle

	# focus the parent container
	bindsym $mod+a focus parent

	# focus the child container
	#bindsym $mod+d focus child

	# switch to workspace
	bindsym $mod+1 workspace 1
	bindsym $mod+2 workspace 2
	bindsym $mod+3 workspace 3
	bindsym $mod+4 workspace 4
	bindsym $mod+5 workspace 5
	bindsym $mod+6 workspace 6
	bindsym $mod+7 workspace 7
	bindsym $mod+8 workspace 8
	bindsym $mod+9 workspace 9
	bindsym $mod+0 workspace 10

	# move focused container to workspace
	bindsym $mod+Shift+1 move container to workspace number 1
	bindsym $mod+Shift+2 move container to workspace number 2
	bindsym $mod+Shift+3 move container to workspace number 3
	bindsym $mod+Shift+4 move container to workspace number 4
	bindsym $mod+Shift+5 move container to workspace number 5
	bindsym $mod+Shift+6 move container to workspace number 6
	bindsym $mod+Shift+7 move container to workspace number 7
	bindsym $mod+Shift+8 move container to workspace number 8
	bindsym $mod+Shift+9 move container to workspace number 9
	bindsym $mod+Shift+0 move container to workspace number 10

	# MEDIA KEYS
	bindsym --release $mod+p exec mpc toggle
	bindsym --release $mod+Shift+period exec mpc next
	bindsym --release $mod+Shift+comma exec mpc prev
	bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume 0 -- +10% && killall -SIGUSR1 i3status
	bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume 0 -- -10% && killall -SIGUSR1 i3status

	# reload the configuration file
	bindsym $mod+Shift+c reload
	# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
	bindsym $mod+Shift+r restart
	# exit i3 (logs you out of your X session)
	bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

	# resize window (you can also use the mouse for that)
	mode "resize" {
	# These bindings trigger as soon as you enter the resize mode

	# Pressing left will shrink the window’s width.
	# Pressing right will grow the window’s width.
	# Pressing up will shrink the window’s height.
	# Pressing down will grow the window’s height.
	bindsym j resize shrink width 10 px or 10 ppt
	bindsym k resize grow height 10 px or 10 ppt
	bindsym l resize shrink height 10 px or 10 ppt
	bindsym semicolon resize grow width 10 px or 10 ppt

	# same bindings, but for the arrow keys
	bindsym Left resize shrink width 10 px or 10 ppt
	bindsym Down resize grow height 10 px or 10 ppt
	bindsym Up resize shrink height 10 px or 10 ppt
	bindsym Right resize grow width 10 px or 10 ppt

	# back to normal: Enter or Escape
	bindsym Return mode "default"
	bindsym Escape mode "default"
	}

	bindsym $mod+r mode "resize"

	# Start i3bar to display a workspace bar (plus the system information i3status
	# finds out, if available)


	# colours border bg text indicator
	client.focused $color12 $BORDERF $FOCUS $BORDERF
	client.focused_inactive $color12 $UNFOCUS $UNFOCUS $UNFOCUS
	client.unfocused $color4 $BORDERU $UNFOCUS $BORDERU
	client.urgent $color5 $FOCUS $FOCUS $FOCUS
	client.background $UNFOCUS


	bar {
	i3bar_command i3bar -t
	status_command SCRIPT_DIR=/usr/libexec/i3blocks i3blocks
	position top
	colors {
	background #eceff188
	statusline #263238ff
	separator #cfd8dcff
	# colors outline background number
	focused_workspace $color6 $color6 $color15
	active_workspace $color6 $color6 $color15
	inactive_workspace $color7 $color7 $color6
	urgent_workspace $color13 $color13 $color15
	}
	}

	#BAR
	#exec --no-startup-id conky -c ~/.config/conky/blank
	#exec ~/.config/lemon/bar

	#DUNST
	exec dunst

	#AUTOMATIC MOUNTING
	exec --no-startup-id devmon --sync --exec-on-drive "notify-send 'Automount' '%l is now mounted at %d.'" --exec-on-remove "notify-send 'Automount' '%l has been removed.'"

	#XSCREENSAVER
	exec xscreensaver

	set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown
	mode "$mode_system" {
	bindsym l exec --no-startup-id lock, mode "default"
	bindsym e exec --no-startup-id i3-msg exit, mode "default"
	bindsym s exec --no-startup-id lock && systemctl suspend, mode "default"
	bindsym h exec --no-startup-id lock && systemctl hibernate, mode "default"
	bindsym r exec --no-startup-id systemctl reboot, mode "default"
	bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default"

	# back to normal: Enter or Escape
	bindsym Return mode "default"
	bindsym Escape mode "default"
	}

	#bindsym $mod+Pause mode "$mode_system"
	bindsym $mod+Pause exec --no-startup-id ~/scripts/power

	#xflux
	exec xflux -l 51.5333408

	#screenshots
	bindsym Print exec --no-startup-id scrot '~/Documents/scrots/auto/%Y-%m-%d_%H%M%S_scrot.png' -e 'notify-send "scrot" "Screenshot saved as $n"'

	exec notify-send -a i3 "loaded" "Welcome to i3."