#MindWave Mobile: User Guide
To power on the MindWave Mobile headset, slide the switch to the ON (middle) position. When held past the ON position for 3 seconds and then released, the headset will enter Bluetooth pairing mode. If instead the switch is held past the ON position for 6 seconds, the headset's pairing memory will be cleared.
While the MindWave Mobile headset is powered on, the LED light on the side of the headset will be turned on. If the MindWave has a low battery, the LED light will flash to indicate low battery status.
To turn the MindWave Mobile off, slide the switch back to the OFF position.
The MindWave Mobile's LED light has has two colors: red and blue. Refer to the chart to see whatstate the MindWave is in.
| Light | MindWave State | Meaning |
|---|---|---|
| Off | Powered Off | Mindwave is turned off or has no battery |
| Off | Powered Off | MindWave is turned off or has no battery |
| Double Blinking Blue | Pairing Mode | MindWave is readytobepairedtoadevice |
| Solid Red | Unpaired | MindWave needs to be paired to a device |
| Single | Blinking Blue Ready | MindWave is waitingforapaireddevicetoconnect |
| Solid Blue | Connected | MindWave is communicating with a paired device |
| Double Blinking Red | Low Battery | Need to replace the MindWave battery |
###Bluetooth Pairing
"Pairing" is when your computer/tablet/phone remembers your MindWave Mobile headset, and your MindWave Mobile headset allows that computer/tablet/phone to connect to it. Note that this is different from"connecting", which is when the computer/tablet/phone is actively sending or receiving data and information.
You must first pair each of your computers/tablets/phones to your MindWave Mobile headset in order for them to connect to each other. To do so:
-
Put the MindWave Mobile headset into "Pairing Mode" by holding the On/Off switch past the"On" position for 3 seconds.
- Important: Release the switch when the light starts flashing blue. If you continue holding for more than 6 seconds, the MindWave Mobile headset will clear all previously remem-bered pairings.
-
Refer to the Bluetooth pairing instructions that came with your iOS, Android, PC, or Macdevice to search for and pair to the MindWave Mobile headset.
- If prompted, enter "0000" for the authentication key.
Your MindWave Mobile headset can "pair/remember" up to 3 computers/tablets/phones at the sametime.