Last active
December 27, 2015 17:19
-
-
Save mandarjog/7360787 to your computer and use it in GitHub Desktop.
Janus Error Message
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# cd /opt/demo400ap/scripts/# python ./demoMenu.py | |
400AP Demonstration (v2.1) | |
1)Edit demo configuration file (nano) | |
2)Open terminal to send AT commands (microcom) | |
3)Start GPS demo (demoGps.py) | |
4)Start a PPP connection (demoPPP.py start) | |
5)Stop a PPP connection (demoPPP.py stop) | |
6)Start router (demoRouter.py start) | |
7)Stop router (demoRouter.py stop) | |
x)Exit | |
Selection: Executing Script: /opt/demo400ap/scripts/demoRouter.py start | |
eth0: link down | |
eth0: link up (100/Full) | |
ip_tables: (C) 2000-2006 Netfilter Core Team | |
nf_conntrack version 0.5.0 (955 buckets, 3820 max) | |
PRODUCTION=True | |
CGMM=GE865 | |
CGMR=12.00.003 | |
ENS=1 | |
APN=a105.2way.net | |
IP=12.237.120.180 | |
PORT=9999 | |
PROTOCOL=UDP | |
SMSD=+16305550100 | |
USERNAME= | |
PASSWORD= | |
INTERVAL = 15 | |
VERBOSE = True | |
CONF_STATUS = 0 | |
Plug-in Terminus is off | |
Powering On | |
Waiting for power state to change | |
Plug-in Terminus is on | |
SIM Verification Cycle | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
SIM busy! ....waiting! | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
ERROR | |
Sending AT Command: AT+CPBS? | |
Waiting for AT Command Response | |
+CPBS: "SM",0,250 | |
SIM ready | |
Sending AT Command: AT+CGMM | |
Waiting for AT Command Response | |
GE865 | |
Sending AT Command: AT#GAUTH=0 | |
Waiting for AT Command Response | |
OK | |
Sending AT Command: AT#SELINT? | |
Waiting for AT Command Response | |
#SELINT: 2 | |
Sending AT Command: AT#ENS? | |
Waiting for AT Command Response | |
#ENS: 1 | |
Sending AT Command: AT+CGDCONT=1,"IP","a105.2way.net","0.0.0.0",0,0 | |
Waiting for AT Command Response | |
OK | |
Sending AT Command: AT#DSTO=10 | |
Waiting for AT Command Response | |
OK | |
Sending AT Command: ATS12=40 | |
Waiting for AT Command Response | |
OK | |
Sending AT Command: AT#SKIPESC=1 | |
Waiting for AT Command Response | |
OK | |
Sending AT Command: AT#SCFG=1,1,1500,600,100,10 | |
Waiting for AT Command Response | |
OK | |
Sending AT Command: AT#SCFGEXT=1,2,0,30,0,0 | |
Waiting for AT Command Response | |
OK | |
Sending AT Command: AT+CREG? | |
Waiting for AT Command Response | |
+CREG: 0,1 | |
pppd options in effect: | |
-d # (from command line) | |
-detach # (from command line) | |
persist # (from /etc/ppp/peers/modem_gsm865cf) | |
dump # (from /etc/ppp/peers/modem_gsm865cf) | |
noauth # (from /etc/ppp/peers/modem_gsm865cf) | |
/dev/ttyS1 # (from /etc/ppp/peers/modem_gsm865cf) | |
115200 # (from /etc/ppp/peers/modem_gsm865cf) | |
lock # (from /etc/ppp/peers/modem_gsm865cf) | |
connect /usr/sbin/chat -v -f /etc/ppp/chatscripts/modem_connect_gsm # (from /etc/ppp/peers/modem_gsm865cf) | |
crtscts # (from /etc/ppp/peers/modem_gsm865cf) | |
noaccomp # (from /etc/ppp/peers/modem_gsm865cf) | |
nopcomp # (from /etc/ppp/peers/modem_gsm865cf) | |
lcp-echo-failure 3 # (from /etc/ppp/peers/modem_gsm865cf) | |
lcp-echo-interval 3 # (from /etc/ppp/peers/modem_gsm865cf) | |
show-password # (from /etc/ppp/peers/modem_gsm865cf) | |
novj # (from /etc/ppp/peers/modem_gsm865cf) | |
novjccomp # (from /etc/ppp/peers/modem_gsm865cf) | |
ipcp-accept-local # (from /etc/ppp/peers/modem_gsm865cf) | |
ipcp-accept-remote # (from /etc/ppp/peers/modem_gsm865cf) | |
noipdefault # (from /etc/ppp/peers/modem_gsm865cf) | |
defaultroute # (from /etc/ppp/peers/modem_gsm865cf) | |
usepeerdns # (from /etc/ppp/peers/modem_gsm865cf) | |
noccp # (from /etc/ppp/peers/modem_gsm865cf) | |
nobsdcomp # (from /etc/ppp/peers/modem_gsm865cf) | |
# Script /usr/sbin/chat -v -f /etc/ppp/chatscripts/modem_connect_gsm finished (pid 559), status = 0x0 | |
Serial connection established. | |
using channel 1 | |
Using interface ppp0 | |
Connect: ppp0 <--> /dev/ttyS1 | |
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x731e14ee>] | |
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x731e14ee>] | |
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe480000> <pcomp> <accomp>] | |
sent [LCP ConfRej id=0x1 <pcomp> <accomp>] | |
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x15490000>] | |
sent [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x15490000>] | |
sent [LCP EchoReq id=0x0 magic=0x731e14ee] | |
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>] | |
rcvd [IPCP ConfReq id=0x2 <addr 192.168.202.0>] | |
sent [IPCP ConfAck id=0x2 <addr 192.168.202.0>] | |
rcvd [LCP EchoRep id=0x0 magic=0x2c490000] | |
rcvd [IPCP ConfNak id=0x1 <addr 10.17.79.249> <ms-dns1 63.84.143.13> <ms-dns2 63.84.143.14>] | |
sent [IPCP ConfReq id=0x2 <addr 10.17.79.249> <ms-dns1 63.84.143.13> <ms-dns2 63.84.143.14>] | |
rcvd [IPCP ConfAck id=0x2 <addr 10.17.79.249> <ms-dns1 63.84.143.13> <ms-dns2 63.84.143.14>] | |
local IP address 10.17.79.249 | |
remote IP address 192.168.202.0 | |
primary DNS address 63.84.143.13 | |
secondary DNS address 63.84.143.14 | |
eth0: link down | |
eth0: link up (100/Full) | |
eth0: link down | |
eth0: link up (100/Full) | |
eth0: link down | |
eth0: link up (100/Full) | |
eth0: link down | |
eth0: link up (100/Full) | |
eth0: link down | |
eth0: link up (100/Full) | |
eth0: link down | |
eth0: link up (100/Full) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment