-
-
Save manorit2001/4f810a2a84fd3acf3a58d40e50120c53 to your computer and use it in GitHub Desktop.
DT Sync from v6.7-rc1
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot SPL 2024.01-rc2-00073-ge22e5ff6afd2 (Nov 16 2023 - 14:41:21 +0530) | |
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
EEPROM not available at 0x50, trying to read at 0x51 | |
SPL initial stack usage: 13432 bytes | |
Trying to boot from UART | |
CLoaded 1003319 bytes | |
Loading Environment from nowhere... OK | |
init_env from device 7 not supported! | |
Starting ATF on ARM64 core... | |
NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty | |
NOTICE: BL31: Built : 09:34:15, Aug 24 2023 | |
I/TC: | |
I/TC: OP-TEE version: 4.0.0 (gcc version 11.4.0 (GCC)) #1 Fri Oct 20 18:29:31 UTC 2023 aarch64 | |
I/TC: WARNING: This OP-TEE configuration might be insecure! | |
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
I/TC: Primary CPU initializing | |
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
I/TC: HUK Initialized | |
I/TC: Activated SA2UL device | |
I/TC: Enabled firewalls for SA2UL TRNG device | |
I/TC: SA2UL TRNG initialized | |
I/TC: SA2UL Drivers initialized | |
I/TC: Primary CPU switching to normal world boot | |
U-Boot SPL 2024.01-rc2-00073-ge22e5ff6afd2 (Nov 16 2023 - 14:41:59 +0530) | |
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
Trying to boot from UART | |
CLoaded 1317607 bytes | |
U-Boot 2024.01-rc2-00073-ge22e5ff6afd2 (Nov 16 2023 - 14:41:59 +0530) | |
SoC: J721S2 SR1.0 HS-FS | |
Model: Texas Instruments AM68 SK | |
Board: AM68-SK-SOM rev E1 | |
DRAM: 16 GiB | |
Core: 83 devices, 29 uclasses, devicetree: separate | |
Flash: 0 Bytes | |
MMC: mmc@4fb0000: 1 | |
Loading Environment from nowhere... OK | |
In: serial@2880000 | |
Out: serial@2880000 | |
Err: serial@2880000 | |
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 | |
Net: eth0: ethernet@46000000port@1 | |
Hit any key to stop autoboot: 2 0 | |
=> | |
=> | |
=> | |
=> version | |
U-Boot 2024.01-rc2-00073-ge22e5ff6afd2 (Nov 16 2023 - 14:41:59 +0530) | |
aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 11.3.Rel1) 11.3.1 20220712 | |
GNU ld (Arm GNU Toolchain 11.3.Rel1) 2.38.20220708 | |
=> |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot SPL 2024.01-rc2-00073-ge22e5ff6afd2 (Nov 16 2023 - 14:41:21 +0530) | |
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
SPL initial stack usage: 13432 bytes | |
Trying to boot from UART | |
Cicate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
Loaded 1003319 bytes | |
Loading Environment from nowhere... OK | |
init_env from device 7 not supported! | |
Starting ATF on ARM64 core... | |
NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty | |
NOTICE: BL31: Built : 09:34:15, Aug 24 2023 | |
I/TC: | |
I/TC: OP-TEE version: 4.0.0 (gcc version 11.4.0 (GCC)) #1 Fri Oct 20 18:29:31 UTC 2023 aarch64 | |
I/TC: WARNING: This OP-TEE configuration might be insecure! | |
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
I/TC: Primary CPU initializing | |
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
I/TC: HUK Initialized | |
I/TC: Activated SA2UL device | |
I/TC: Fixing SA2UL firewall owner for GP device | |
I/TC: Enabled firewalls for SA2UL TRNG device | |
I/TC: SA2UL TRNG initialized | |
I/TC: SA2UL Drivers initialized | |
I/TC: Primary CPU switching to normal world boot | |
U-Boot SPL 2024.01-rc2-00073-ge22e5ff6afd2 (Nov 16 2023 - 14:41:59 +0530) | |
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
Trying to boot from UART | |
Ccertificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
Loaded 1317607 bytes | |
U-Boot 2024.01-rc2-00073-ge22e5ff6afd2 (Nov 16 2023 - 14:41:59 +0530) | |
SoC: J721S2 SR1.0 GP | |
Model: Texas Instruments J721S2 EVM | |
Board: J721S2X-PM1-SOM rev E3 | |
DRAM: 16 GiB | |
Core: 83 devices, 29 uclasses, devicetree: separate | |
Flash: 0 Bytes | |
MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
Loading Environment from nowhere... OK | |
In: serial@2880000 | |
Out: serial@2880000 | |
Err: serial@2880000 | |
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 | |
Detected: J7X-GESI-EXP rev E3 | |
Net: eth0: ethernet@46000000port@1 | |
Hit any key to stop autoboot: 2 0 | |
=> | |
=> | |
=> | |
=> version | |
U-Boot 2024.01-rc2-00073-ge22e5ff6afd2 (Nov 16 2023 - 14:41:59 +0530) | |
aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 11.3.Rel1) 11.3.1 20220712 | |
GNU ld (Arm GNU Toolchain 11.3.Rel1) 2.38.20220708 | |
=> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment