-
-
Save manorit2001/6bb91885c608e3a8cb0267ab2c614781 to your computer and use it in GitHub Desktop.
ospi boot j721s2
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2024.07-rc3-00363-g719c6ae59846 (Jun 04 2024 - 11:31:54 +0530) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| SPL initial stack usage: 13432 bytes | |
| Trying to boot from DFU | |
| >>>> On command: #check prompt waiting for #check prompt.+?(?-mix:root@.+[@:#]+) >>> error: execution expired | |
| >>>> On command: #check prompt waiting for #check prompt.+?(?-mix:root@.+[@:#]+) >>> error: execution expired | |
| >>>> On command: #check prompt waiting for #check prompt.+?(?-mix:root@.+[@:#]+) >>> error: execution expired | |
| Calling switch_off on port 1 at dummy_pwr ... | |
| Dummy automation interface: switch_off | |
| DUT can be switched OFF manually now!... | |
| ####DOWNLOAD ... OK | |
| Ctrl+C to exit ... | |
| alloc space exhausted | |
| Could not get FIT buffer of 1035832 bytes | |
| check CONFIG_SPL_SYS_MALLOC_SIZE | |
| Authentication passed | |
| Authentication passed | |
| Authentication passed | |
| Loading Environment from nowhere... OK | |
| init_env from device 18 not supported! | |
| Authentication passed | |
| Authentication passed | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty | |
| NOTICE: BL31: Built : 16:09:05, Feb 9 2024 | |
| I/TC: | |
| I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: GIC redistributor base address not provided | |
| I/TC: Assuming default GIC group status and modifier | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| I/TC: Secure Board Configuration Software: Rev 1 | |
| I/TC: Secure Boot Keys: Count 1, Rev 1 | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2024.07-rc3-00363-g719c6ae59846 (Jun 04 2024 - 11:32:08 +0530) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| Trying to boot from DFU | |
| cdns-usb3-peripheral usb@6000000: DRD version v1 (ID: 0004024e, rev: 00000200) | |
| cdns-usb3-peripheral usb@6000000: Initialized ep0 support: | |
| cdns-usb3-peripheral usb@6000000: Initialized ep1out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep2out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep3out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep4out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep5out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep6out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep7out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep8out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep9out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep10out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep11out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep12out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep13out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep14out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep15out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep1in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep2in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep3in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep4in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep5in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep6in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep7in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep8in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep9in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep10in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep11in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep12in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep13in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep14in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep15in support: BULK, INT ISO | |
| Calling switch_on on port 1 at dummy_pwr ... | |
| Dummy automation interface: switch_on | |
| DUT can be switched ON manually now!... | |
| #####DOWNLOAD ... OK | |
| Ctrl+C to exit ... | |
| Authentication passed | |
| Authentication passed | |
| U-Boot 2024.07-rc3-00363-g719c6ae59846 (Jun 04 2024 - 11:32:08 +0530) | |
| SoC: J721S2 SR1.0 HS-SE | |
| Model: Texas Instruments J721S2 EVM | |
| Board: J721S2X-PM1-SOM rev E1 | |
| DRAM: 16 GiB | |
| Core: 101 devices, 32 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2880000 | |
| Out: serial@2880000 | |
| Err: serial@2880000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 0 | |
| => setenv serverip '10.24.68.185' | |
| => dhcp | |
| k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:272 | |
| k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| BOOTP broadcast 1 | |
| BOOTP broadcast 2 | |
| BOOTP broadcast 3 | |
| DHCP client bound to address 172.24.227.136 (1258 ms) | |
| => | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| BOOTP broadcast 1 | |
| DHCP client bound to address 172.24.227.136 (7 ms) | |
| => tftp ${loadaddr} 10.24.68.185:tiboot3.bin | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 10.24.68.185; our IP address is 172.24.227.136; sending through gateway 172.24.226.1 | |
| Filename 'tiboot3.bin'. | |
| Load address: 0x82000000 | |
| Loading: ################################################## 414.7 KiB | |
| 1.9 MiB/s | |
| done | |
| Bytes transferred = 424638 (67abe hex) | |
| => print filesize | |
| filesize=67abe | |
| => sf probe | |
| jedec_spi_nor flash@0: non-uniform erase sector maps are not supported yet. | |
| SF: Detected s28hs512t with page size 256 Bytes, erase size 256 KiB, total 64 MiB | |
| => sf probe | |
| jedec_spi_nor flash@0: non-uniform erase sector maps are not supported yet. | |
| SF: Detected s28hs512t with page size 256 Bytes, erase size 256 KiB, total 64 MiB | |
| => sf erase 0 80000 | |
| SF: 524288 bytes @ 0x0 Erased: OK | |
| => sf write ${loadaddr} 0 67abe | |
| device 0 offset 0x0, size 0x67abe | |
| SF: 424638 bytes @ 0x0 Written: OK | |
| => tftp ${loadaddr} 10.24.68.185:tispl.bin | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 10.24.68.185; our IP address is 172.24.227.136; sending through gateway 172.24.226.1 | |
| Filename 'tispl.bin'. | |
| Load address: 0x82000000 | |
| Loading: ################################################## 1011.6 KiB | |
| 1.9 MiB/s | |
| done | |
| Bytes transferred = 1035831 (fce37 hex) | |
| => print filesize | |
| filesize=fce37 | |
| => sf probe | |
| jedec_spi_nor flash@0: non-uniform erase sector maps are not supported yet. | |
| SF: Detected s28hs512t with page size 256 Bytes, erase size 256 KiB, total 64 MiB | |
| => sf erase 0x80000 100000 | |
| SF: 1048576 bytes @ 0x80000 Erased: OK | |
| => sf write ${loadaddr} 0x80000 fce37 | |
| device 0 offset 0x80000, size 0xfce37 | |
| SF: 1035831 bytes @ 0x80000 Written: OK | |
| => tftp ${loadaddr} 10.24.68.185:u-boot.img | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 10.24.68.185; our IP address is 172.24.227.136; sending through gateway 172.24.226.1 | |
| Filename 'u-boot.img'. | |
| Load address: 0x82000000 | |
| Loading: ################################################## 1.2 MiB | |
| 1.9 MiB/s | |
| done | |
| Bytes transferred = 1258259 (133313 hex) | |
| => print filesize | |
| filesize=133313 | |
| => sf probe | |
| jedec_spi_nor flash@0: non-uniform erase sector maps are not supported yet. | |
| SF: Detected s28hs512t with page size 256 Bytes, erase size 256 KiB, total 64 MiB | |
| => sf erase 0x280000 140000 | |
| SF: 1310720 bytes @ 0x280000 Erased: OK | |
| => sf write ${loadaddr} 0x280000 133313 | |
| device 0 offset 0x280000, size 0x133313 | |
| SF: 1258259 bytes @ 0x280000 Written: OK | |
| => mw.b 0x00100030 0x50 1 | |
| => mw.b 0x43000030 0x18 1 | |
| => reset | |
| resetting ... | |
| U-Boot SPL 2024.07-rc3-00363-g719c6ae59846 (Jun 04 2024 - 11:31:54 +0530) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| SPL initial stack usage: 13432 bytes | |
| Trying to boot from SPI | |
| Authentication passed | |
| Authentication passed | |
| Authentication passed | |
| Loading Environment from nowhere... OK | |
| Authentication passed | |
| Authentication passed | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty | |
| NOTICE: BL31: Built : 16:09:05, Feb 9 2024 | |
| I/TC: | |
| I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: GIC redistributor base address not provided | |
| I/TC: Assuming default GIC group status and modifier | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| I/TC: Secure Board Configuration Software: Rev 1 | |
| I/TC: Secure Boot Keys: Count 1, Rev 1 | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2024.07-rc3-00363-g719c6ae59846 (Jun 04 2024 - 11:32:08 +0530) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') | |
| Trying to boot from SPI | |
| cadence_spi spi@47040000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 | |
| jedec_spi_nor flash@0: non-uniform erase sector maps are not supported yet. | |
| k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:272 | |
| k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled | |
| Authentication passed | |
| Authentication passed | |
| U-Boot 2024.07-rc3-00363-g719c6ae59846 (Jun 04 2024 - 11:32:08 +0530) | |
| SoC: J721S2 SR1.0 HS-SE | |
| Model: Texas Instruments J721S2 EVM | |
| Board: J721S2X-PM1-SOM rev E1 | |
| DRAM: 16 GiB | |
| Core: 101 devices, 32 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2880000 | |
| Out: serial@2880000 | |
| Err: serial@2880000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment