DTS Sync from v6.6-rc1 to u-boot: Boot test

am68-sk-boot-test

U-Boot SPL 2023.10-rc4-00505-g5dc54e58c8ce (Oct 06 2023 - 09:54:15 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
EEPROM not available at 0x50, trying to read at 0x51
SPL initial stack usage: 13432 bytes
Trying to boot from UART
CLoaded 950407 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.9(release):v2.9.0-dirty
NOTICE:  BL31: Built : 14:12:59, May 22 2023
I/TC: 
I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2023.10-rc4-00505-g5dc54e58c8ce (Oct 06 2023 - 09:54:46 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
Trying to boot from UART
CLoaded 1290695 bytes


U-Boot 2023.10-rc4-00505-g5dc54e58c8ce (Oct 06 2023 - 09:54:46 +0530)

SoC:   J721S2 SR1.0 HS-FS
Model: Texas Instruments AM68 SK
Board: AM68-SK-SOM rev E1
DRAM:  16 GiB
Core:  80 devices, 27 uclasses, devicetree: separate
Flash: 0 Bytes
MMC:   mmc@4fb0000: 1
Loading Environment from nowhere... OK
In:    serial@2880000
Out:   serial@2880000
Err:   serial@2880000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Net:   eth0: ethernet@46000000port@1
Hit any key to stop autoboot:  2  0
=> 
=>  
=>  
=> version
U-Boot 2023.10-rc4-00505-g5dc54e58c8ce (Oct 06 2023 - 09:54:46 +0530)

aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 11.3.Rel1) 11.3.1 20220712
GNU ld (Arm GNU Toolchain 11.3.Rel1) 2.38.20220708
=> 

j721s2-boot-test

U-Boot SPL 2023.10-rc4-00505-g5dc54e58c8ce (Oct 06 2023 - 09:54:15 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.0--v09.01.00 (Kool Koala)')
SPL initial stack usage: 13432 bytes
Trying to boot from UART
Cte on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 950407 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.9(release):v2.9.0-dirty
NOTICE:  BL31: Built : 14:12:59, May 22 2023
I/TC: 
I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.0--v09.01.00 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2023.10-rc4-00505-g5dc54e58c8ce (Oct 06 2023 - 09:54:46 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.0--v09.01.00 (Kool Koala)')
Trying to boot from UART
Cg certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1290695 bytes


U-Boot 2023.10-rc4-00505-g5dc54e58c8ce (Oct 06 2023 - 09:54:46 +0530)

SoC:   J721S2 SR1.0 GP
Model: Texas Instruments J721S2 EVM
Board: J721S2X-PM1-SOM rev E3
DRAM:  16 GiB
Core:  83 devices, 29 uclasses, devicetree: separate
Flash: 0 Bytes
MMC:   mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In:    serial@2880000
Out:   serial@2880000
Err:   serial@2880000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Net:   eth0: ethernet@46000000port@1
Hit any key to stop autoboot:  2  0
=> 
=>  
=>  
=>  
=>  
=>  
=>  
=>  
=>  
=>  
=> version
U-Boot 2023.10-rc4-00505-g5dc54e58c8ce (Oct 06 2023 - 09:54:46 +0530)

aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 11.3.Rel1) 11.3.1 20220712
GNU ld (Arm GNU Toolchain 11.3.Rel1) 2.38.20220708
=>