SPA112 ovh belgium configuration instruction

SPA112_ovh_belgium_config

Paramétrage de ligne sur le SPA112 :
- une fois sur l'interface du téléphone, cliquer sur
"voice" puis "line 1",
- passer les champs avec les valeurs suivantes :
=> line enable : yes
=> proxy : sip.ovh.be
=> use outbound proxy : yes
=> outbound proxy : sip.ovh.be:5962
=> register : 1800

=> display name : <phoneNumber>
=> user id : <phoneNumber>
=> password : xxxx (celui de votre ligne)
=> use auth id : yes
=> Auth ID : <phoneNumber>
=> SIP URI: <phoneNumber>
=> Dial Plan : (112S0|100S0|101S0|047[0123456789]xxxxxx|048[23456789]xxxxxx|049[0123456789]xxxxxx|0[123456789]xxxxxxx|00[123459]xxxxxxxxx.)

=> Preferred Codec : G729a
=> Second Preferred Codec: G711u

Allez ensuite dans l'onglet Regional et modifier les paramètre suivant comme indiqué :
        - Ring1 Cadence : 2.25(.25/1.6);60(2/3.5)
        - Ring Waveform : Sinusoïd
        - Ring Frequency : 50
        - Ring Voltage : 70
        - FXS Port Impedance : 270+750||150nF
        - FXS Port Input Gain : 0
        - FXS Port Output Gain : 0
		

    Dial Tones : 440@-10;10(*/0/1)
    Prompt Tone : 440@-10;10(*/0/1)
    Busy Tone : 440@-10;10(.5/.5/1)
    Ring Back Tone : 440@-10;*(2/4/1)
    Ring 1 Cadence : 2.25(.25/1.6);60(2/3.5)

    Ring Waveform : sinusoid
    Ring Voltage : 60
    Ring Frequency : 50

    Time Zone : GMT+1:00
    FXS Port input gain : 0
    FXS Port Output gain : 0
    FXS Port Impedance : 270+750||150nF

    Caller ID Method : Bellcore
    Caller ID FSK : Bell202

Registration State: Failed

Duplicate instructions:

Ring1 Cadence : 2.25(.25/1.6);60(2/3.5)
Ring 1 Cadence : 2.25(.25/1.6);60(2/3.5)
Ring Waveform : Sinusoïd
Ring Waveform : sinusoid
Ring Frequency : 50
Ring Frequency : 50

Conflicting instructions:

Ring Voltage : 70
Ring Voltage : 60

Non existing options:

Time Zone : GMT+1:00

Registration State: Registered

Essential setting (!) SIP URI: <phoneNumber>

@michael79bxl did you manage to configure it ?

I still have an issue to register the SAP112. I use all the parameters you mentionned but it still doesn't want to. I tried my parameters with ZoiPer, on the same network, it works perfectly. Is there a way to do some debugging? It is not verbose at all :-(

There could be another proxy server defined in your SIP information (referenced as Domain/Registar in OVH website) preventing you to register the line ex: sip3.ovh.be

Also the codec could be set regarding some settings on the OVH website (under telephone -> codec): I got g711,g729 specified in the settings.

Super! Merci