manuels/gist:fcbf198d7b5bcd7621eaaad3a3a1b6e5

## gistfile1.txt
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Box 'ubuntu/wily64' could not be found. Attempting to find and install...
    default: Box Provider: virtualbox
    default: Box Version: >= 0
==> default: Loading metadata for box 'ubuntu/wily64'
    default: URL: https://atlas.hashicorp.com/ubuntu/wily64
==> default: Adding box 'ubuntu/wily64' (v20160715.0.0) for provider: virtualbox
    default: Downloading: https://atlas.hashicorp.com/ubuntu/boxes/wily64/versions/20160715.0.0/providers/virtualbox.box
==> default: Successfully added box 'ubuntu/wily64' (v20160715.0.0) for 'virtualbox'!
==> default: Importing base box 'ubuntu/wily64'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'ubuntu/wily64' is up to date...
==> default: Setting the name of the VM: vagrant_default_1473403516581_9541
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
==> default: Forwarding ports...
    default: 22 => 2222 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: SSH address: 127.0.0.1:2222
    default: SSH username: vagrant
    default: SSH auth method: private key
    default: Warning: Connection timeout. Retrying...
    default: Warning: Remote connection disconnect. Retrying...
    default:
    default: Vagrant insecure key detected. Vagrant will automatically replace
    default: this with a newly generated keypair for better security.
    default:
    default: Inserting generated public key within guest...
    default: Removing insecure key from the guest if its present...
    default: Key inserted! Disconnecting and reconnecting using new SSH key...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
    default: The guest additions on this VM do not match the installed version of
    default: VirtualBox! In most cases this is fine, but in rare cases it can
    default: prevent things such as shared folders from working properly. If you see
    default: shared folder errors, please make sure the guest additions within the
    default: virtual machine match the version of VirtualBox you have installed on
    default: your host and reload your VM.
    default:
    default: Guest Additions Version: 5.0.14
    default: VirtualBox Version: 4.3
==> default: Mounting shared folders...
    default: /vagrant => /home/manuel/tmp/afl.rs-master/vagrant
==> default: Running provisioner: shell...
    default: Running: inline script
==> default: mesg: ttyname failed: Inappropriate ioctl for device
==> default: Hit http://archive.ubuntu.com wily InRelease
==> default: Get:1 http://security.ubuntu.com wily-security InRelease [65.9 kB]
==> default: Get:2 http://archive.ubuntu.com wily-updates InRelease [65.9 kB]
==> default: Get:3 http://security.ubuntu.com wily-security/main Sources [55.3 kB]
==> default: Get:4 http://archive.ubuntu.com wily-backports InRelease [65.9 kB]
==> default: Get:5 http://archive.ubuntu.com wily/main Sources [1,118 kB]
==> default: Get:6 http://security.ubuntu.com wily-security/restricted Sources [2,854 B]
==> default: Get:7 http://security.ubuntu.com wily-security/universe Sources [14.3 kB]
==> default: Get:8 http://security.ubuntu.com wily-security/multiverse Sources [2,784 B]
==> default: Get:9 http://security.ubuntu.com wily-security/main amd64 Packages [180 kB]
==> default: Get:10 http://archive.ubuntu.com wily/restricted Sources [7,181 B]
==> default: Get:11 http://security.ubuntu.com wily-security/restricted amd64 Packages [10.9 kB]
==> default: Get:12 http://archive.ubuntu.com wily/universe Sources [7,238 kB]
==> default: Get:13 http://security.ubuntu.com wily-security/universe amd64 Packages [57.3 kB]
==> default: Get:14 http://security.ubuntu.com wily-security/multiverse amd64 Packages [6,248 B]
==> default: Get:15 http://security.ubuntu.com wily-security/main Translation-en [88.2 kB]
==> default: Get:16 http://security.ubuntu.com wily-security/multiverse Translation-en [2,806 B]
==> default: Get:17 http://security.ubuntu.com wily-security/restricted Translation-en [2,666 B]
==> default: Get:18 http://security.ubuntu.com wily-security/universe Translation-en [37.4 kB]
==> default: Get:19 http://archive.ubuntu.com wily/multiverse Sources [178 kB]
==> default: Hit http://archive.ubuntu.com wily/main amd64 Packages
==> default: Hit http://archive.ubuntu.com wily/restricted amd64 Packages
==> default: Hit http://archive.ubuntu.com wily/universe amd64 Packages
==> default: Hit http://archive.ubuntu.com wily/multiverse amd64 Packages
==> default: Hit http://archive.ubuntu.com wily/main Translation-en
==> default: Hit http://archive.ubuntu.com wily/multiverse Translation-en
==> default: Hit http://archive.ubuntu.com wily/restricted Translation-en
==> default: Hit http://archive.ubuntu.com wily/universe Translation-en
==> default: Get:20 http://archive.ubuntu.com wily-updates/main Sources [88.4 kB]
==> default: Get:21 http://archive.ubuntu.com wily-updates/restricted Sources [3,741 B]
==> default: Get:22 http://archive.ubuntu.com wily-updates/universe Sources [28.4 kB]
==> default: Get:23 http://archive.ubuntu.com wily-updates/multiverse Sources [3,198 B]
==> default: Get:24 http://archive.ubuntu.com wily-updates/main amd64 Packages [245 kB]
==> default: Get:25 http://archive.ubuntu.com wily-updates/restricted amd64 Packages [13.3 kB]
==> default: Get:26 http://archive.ubuntu.com wily-updates/universe amd64 Packages [105 kB]
==> default: Get:27 http://archive.ubuntu.com wily-updates/multiverse amd64 Packages [6,248 B]
==> default: Get:28 http://archive.ubuntu.com wily-updates/main Translation-en [117 kB]
==> default: Get:29 http://archive.ubuntu.com wily-updates/multiverse Translation-en [3,156 B]
==> default: Get:30 http://archive.ubuntu.com wily-updates/restricted Translation-en [3,024 B]
==> default: Get:31 http://archive.ubuntu.com wily-updates/universe Translation-en [60.2 kB]
==> default: Get:32 http://archive.ubuntu.com wily-backports/main Sources [748 B]
==> default: Get:33 http://archive.ubuntu.com wily-backports/restricted Sources [28 B]
==> default: Get:34 http://archive.ubuntu.com wily-backports/universe Sources [2,257 B]
==> default: Get:35 http://archive.ubuntu.com wily-backports/multiverse Sources [28 B]
==> default: Get:36 http://archive.ubuntu.com wily-backports/main amd64 Packages [619 B]
==> default: Get:37 http://archive.ubuntu.com wily-backports/restricted amd64 Packages [28 B]
==> default: Get:38 http://archive.ubuntu.com wily-backports/universe amd64 Packages [2,006 B]
==> default: Get:39 http://archive.ubuntu.com wily-backports/multiverse amd64 Packages [28 B]
==> default: Get:40 http://archive.ubuntu.com wily-backports/main Translation-en [496 B]
==> default: Get:41 http://archive.ubuntu.com wily-backports/multiverse Translation-en [28 B]
==> default: Get:42 http://archive.ubuntu.com wily-backports/restricted Translation-en [28 B]
==> default: Get:43 http://archive.ubuntu.com wily-backports/universe Translation-en [1,390 B]
==> default: Fetched 9,884 kB in 3s (2,764 kB/s)
==> default: Reading package lists...
==> default: Reading package lists...
==> default: Building dependency tree...
==> default:
==> default: Reading state information...
==> default: git is already the newest version.
==> default: The following extra packages will be installed:
==> default:   binfmt-support clang-3.6 cmake-data libarchive13 libclang-common-3.6-dev
==> default:   libclang1-3.6 libcurl3 libffi-dev libjsoncpp0v5 liblzo2-2 libobjc-5-dev
==> default:   libobjc4 libssl-doc libtinfo-dev llvm-3.6 llvm-3.6-dev llvm-3.6-runtime
==> default:   zlib1g-dev
==> default: Suggested packages:
==> default:   gnustep gnustep-devel clang-3.6-doc codeblocks eclipse ninja-build lrzip
==> default:   llvm-3.6-doc
==> default: The following NEW packages will be installed:
==> default:   binfmt-support clang clang-3.6 cmake cmake-data libarchive13
==> default:   libclang-common-3.6-dev libclang1-3.6 libcurl3 libffi-dev libjsoncpp0v5
==> default:   liblzo2-2 libobjc-5-dev libobjc4 libssl-dev libssl-doc libtinfo-dev llvm-3.6
==> default:   llvm-3.6-dev llvm-3.6-runtime zlib1g-dev
==> default: 0 upgraded, 21 newly installed, 0 to remove and 0 not upgraded.
==> default: Need to get 50.3 MB of archives.
==> default: After this operation, 245 MB of additional disk space will be used.
==> default: Get:1 http://archive.ubuntu.com/ubuntu/ wily/main cmake-data all 3.2.2-2ubuntu3 [1,029 kB]
==> default: Get:2 http://archive.ubuntu.com/ubuntu/ wily/main liblzo2-2 amd64 2.08-1.2 [48.7 kB]
==> default: Get:3 http://archive.ubuntu.com/ubuntu/ wily-updates/main libarchive13 amd64 3.1.2-11ubuntu0.15.10.2 [261 kB]
==> default: Get:4 http://archive.ubuntu.com/ubuntu/ wily-updates/main libcurl3 amd64 7.43.0-1ubuntu2.1 [186 kB]
==> default: Get:5 http://archive.ubuntu.com/ubuntu/ wily/main libjsoncpp0v5 amd64 0.10.5-1 [74.2 kB]
==> default: Get:6 http://archive.ubuntu.com/ubuntu/ wily/main cmake amd64 3.2.2-2ubuntu3 [2,536 kB]
==> default: Get:7 http://archive.ubuntu.com/ubuntu/ wily/main binfmt-support amd64 2.1.5-1 [49.5 kB]
==> default: Get:8 http://archive.ubuntu.com/ubuntu/ wily/main libobjc4 amd64 5.2.1-22ubuntu2 [111 kB]
==> default: Get:9 http://archive.ubuntu.com/ubuntu/ wily/main libobjc-5-dev amd64 5.2.1-22ubuntu2 [382 kB]
==> default: Get:10 http://archive.ubuntu.com/ubuntu/ wily/main libclang1-3.6 amd64 1:3.6.2-1 [3,698 kB]
==> default: Get:11 http://archive.ubuntu.com/ubuntu/ wily/main libclang-common-3.6-dev amd64 1:3.6.2-1 [701 kB]
==> default: Get:12 http://archive.ubuntu.com/ubuntu/ wily/universe clang-3.6 amd64 1:3.6.2-1 [24.8 MB]
==> default: Get:13 http://archive.ubuntu.com/ubuntu/ wily/universe clang amd64 1:3.6-26ubuntu1 [3,350 B]
==> default: Get:14 http://archive.ubuntu.com/ubuntu/ wily/main zlib1g-dev amd64 1:1.2.8.dfsg-2ubuntu4 [168 kB]
==> default: Get:15 http://archive.ubuntu.com/ubuntu/ wily-updates/main libssl-dev amd64 1.0.2d-0ubuntu1.5 [1,344 kB]
==> default: Get:16 http://archive.ubuntu.com/ubuntu/ wily-updates/main libssl-doc all 1.0.2d-0ubuntu1.5 [1,070 kB]
==> default: Get:17 http://archive.ubuntu.com/ubuntu/ wily/main libtinfo-dev amd64 5.9+20150516-2ubuntu1 [77.2 kB]
==> default: Get:18 http://archive.ubuntu.com/ubuntu/ wily/main llvm-3.6-runtime amd64 1:3.6.2-1 [42.4 kB]
==> default: Get:19 http://archive.ubuntu.com/ubuntu/ wily/main llvm-3.6 amd64 1:3.6.2-1 [1,281 kB]
==> default: Get:20 http://archive.ubuntu.com/ubuntu/ wily/main libffi-dev amd64 3.2.1-3 [162 kB]
==> default: Get:21 http://archive.ubuntu.com/ubuntu/ wily/main llvm-3.6-dev amd64 1:3.6.2-1 [12.3 MB]
==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory
==> default: Fetched 50.3 MB in 3min 54s (215 kB/s)
==> default: Selecting previously unselected package cmake-data.
==> default: (Reading database ...
(Reading database ... 30%abase ... 5%
==> default: (Reading database ... 35%
(Reading database ... 55%abase ... 40%
==> default: (Reading database ... 60%
==> default: (Reading database ... 65%
==> default: (Reading database ... 70%
==> default: (Reading database ... 75%
==> default: (Reading database ... 80%
==> default: (Reading database ... 85%
==> default: (Reading database ... 90%
==> default: (Reading database ... 95%
(Reading database ... 84961 files and directories currently installed.)
==> default: Preparing to unpack .../cmake-data_3.2.2-2ubuntu3_all.deb ...
==> default: Unpacking cmake-data (3.2.2-2ubuntu3) ...
==> default: Selecting previously unselected package liblzo2-2:amd64.
==> default: Preparing to unpack .../liblzo2-2_2.08-1.2_amd64.deb ...
==> default: Unpacking liblzo2-2:amd64 (2.08-1.2) ...
==> default: Selecting previously unselected package libarchive13:amd64.
==> default: Preparing to unpack .../libarchive13_3.1.2-11ubuntu0.15.10.2_amd64.deb ...
==> default: Unpacking libarchive13:amd64 (3.1.2-11ubuntu0.15.10.2) ...
==> default: Selecting previously unselected package libcurl3:amd64.
==> default: Preparing to unpack .../libcurl3_7.43.0-1ubuntu2.1_amd64.deb ...
==> default: Unpacking libcurl3:amd64 (7.43.0-1ubuntu2.1) ...
==> default: Selecting previously unselected package libjsoncpp0v5:amd64.
==> default: Preparing to unpack .../libjsoncpp0v5_0.10.5-1_amd64.deb ...
==> default: Unpacking libjsoncpp0v5:amd64 (0.10.5-1) ...
==> default: Selecting previously unselected package cmake.
==> default: Preparing to unpack .../cmake_3.2.2-2ubuntu3_amd64.deb ...
==> default: Unpacking cmake (3.2.2-2ubuntu3) ...
==> default: Selecting previously unselected package binfmt-support.
==> default: Preparing to unpack .../binfmt-support_2.1.5-1_amd64.deb ...
==> default: Unpacking binfmt-support (2.1.5-1) ...
==> default: Selecting previously unselected package libobjc4:amd64.
==> default: Preparing to unpack .../libobjc4_5.2.1-22ubuntu2_amd64.deb ...
==> default: Unpacking libobjc4:amd64 (5.2.1-22ubuntu2) ...
==> default: Selecting previously unselected package libobjc-5-dev:amd64.
==> default: Preparing to unpack .../libobjc-5-dev_5.2.1-22ubuntu2_amd64.deb ...
==> default: Unpacking libobjc-5-dev:amd64 (5.2.1-22ubuntu2) ...
==> default: Selecting previously unselected package libclang1-3.6:amd64.
==> default: Preparing to unpack .../libclang1-3.6_1%3a3.6.2-1_amd64.deb ...
==> default: Unpacking libclang1-3.6:amd64 (1:3.6.2-1) ...
==> default: Selecting previously unselected package libclang-common-3.6-dev.
==> default: Preparing to unpack .../libclang-common-3.6-dev_1%3a3.6.2-1_amd64.deb ...
==> default: Unpacking libclang-common-3.6-dev (1:3.6.2-1) ...
==> default: Selecting previously unselected package clang-3.6.
==> default: Preparing to unpack .../clang-3.6_1%3a3.6.2-1_amd64.deb ...
==> default: Unpacking clang-3.6 (1:3.6.2-1) ...
==> default: Selecting previously unselected package clang.
==> default: Preparing to unpack .../clang_1%3a3.6-26ubuntu1_amd64.deb ...
==> default: Unpacking clang (1:3.6-26ubuntu1) ...
==> default: Selecting previously unselected package zlib1g-dev:amd64.
==> default: Preparing to unpack .../zlib1g-dev_1%3a1.2.8.dfsg-2ubuntu4_amd64.deb ...
==> default: Unpacking zlib1g-dev:amd64 (1:1.2.8.dfsg-2ubuntu4) ...
==> default: Selecting previously unselected package libssl-dev:amd64.
==> default: Preparing to unpack .../libssl-dev_1.0.2d-0ubuntu1.5_amd64.deb ...
==> default: Unpacking libssl-dev:amd64 (1.0.2d-0ubuntu1.5) ...
==> default: Selecting previously unselected package libssl-doc.
==> default: Preparing to unpack .../libssl-doc_1.0.2d-0ubuntu1.5_all.deb ...
==> default: Unpacking libssl-doc (1.0.2d-0ubuntu1.5) ...
==> default: Selecting previously unselected package libtinfo-dev:amd64.
==> default: Preparing to unpack .../libtinfo-dev_5.9+20150516-2ubuntu1_amd64.deb ...
==> default: Unpacking libtinfo-dev:amd64 (5.9+20150516-2ubuntu1) ...
==> default: Selecting previously unselected package llvm-3.6-runtime.
==> default: Preparing to unpack .../llvm-3.6-runtime_1%3a3.6.2-1_amd64.deb ...
==> default: Unpacking llvm-3.6-runtime (1:3.6.2-1) ...
==> default: Selecting previously unselected package llvm-3.6.
==> default: Preparing to unpack .../llvm-3.6_1%3a3.6.2-1_amd64.deb ...
==> default: Unpacking llvm-3.6 (1:3.6.2-1) ...
==> default: Selecting previously unselected package libffi-dev:amd64.
==> default: Preparing to unpack .../libffi-dev_3.2.1-3_amd64.deb ...
==> default: Unpacking libffi-dev:amd64 (3.2.1-3) ...
==> default: Selecting previously unselected package llvm-3.6-dev.
==> default: Preparing to unpack .../llvm-3.6-dev_1%3a3.6.2-1_amd64.deb ...
==> default: Unpacking llvm-3.6-dev (1:3.6.2-1) ...
==> default: Processing triggers for man-db (2.7.4-1) ...
==> default: Processing triggers for ureadahead (0.100.0-19) ...
==> default: Processing triggers for systemd (225-1ubuntu9.1) ...
==> default: Processing triggers for install-info (6.0.0.dfsg.1-3) ...
==> default: Setting up cmake-data (3.2.2-2ubuntu3) ...
==> default: Setting up liblzo2-2:amd64 (2.08-1.2) ...
==> default: Setting up libarchive13:amd64 (3.1.2-11ubuntu0.15.10.2) ...
==> default: Setting up libcurl3:amd64 (7.43.0-1ubuntu2.1) ...
==> default: Setting up libjsoncpp0v5:amd64 (0.10.5-1) ...
==> default: Setting up cmake (3.2.2-2ubuntu3) ...
==> default: Setting up binfmt-support (2.1.5-1) ...
==> default: Setting up libobjc4:amd64 (5.2.1-22ubuntu2) ...
==> default: Setting up libobjc-5-dev:amd64 (5.2.1-22ubuntu2) ...
==> default: Setting up libclang1-3.6:amd64 (1:3.6.2-1) ...
==> default: Setting up libclang-common-3.6-dev (1:3.6.2-1) ...
==> default: Setting up clang-3.6 (1:3.6.2-1) ...
==> default: Setting up clang (1:3.6-26ubuntu1) ...
==> default: Setting up zlib1g-dev:amd64 (1:1.2.8.dfsg-2ubuntu4) ...
==> default: Setting up libssl-dev:amd64 (1.0.2d-0ubuntu1.5) ...
==> default: Setting up libssl-doc (1.0.2d-0ubuntu1.5) ...
==> default: Setting up libtinfo-dev:amd64 (5.9+20150516-2ubuntu1) ...
==> default: Setting up llvm-3.6-runtime (1:3.6.2-1) ...
==> default: Setting up llvm-3.6 (1:3.6.2-1) ...
==> default: Setting up libffi-dev:amd64 (3.2.1-3) ...
==> default: Setting up llvm-3.6-dev (1:3.6.2-1) ...
==> default: Processing triggers for libc-bin (2.21-0ubuntu4.3) ...
==> default: Processing triggers for ureadahead (0.100.0-19) ...
==> default: Processing triggers for systemd (225-1ubuntu9.1) ...
==> default: Cloning into 'rust'...
==> default: configure: looking for configure programs
==> default: configure: found program 'cmp'
==> default: configure: found program 'mkdir'
==> default: configure: found program 'printf'
==> default: configure: found program 'cut'
==> default: configure: found program 'head'
==> default: configure: found program 'grep'
==> default: configure: found program 'xargs'
==> default: configure: found program 'cp'
==> default: configure: found program 'find'
==> default: configure: found program 'uname'
==> default: configure: found program 'date'
==> default: configure: found program 'tr'
==> default: configure: found program 'sed'
==> default: configure: found program 'file'
==> default: configure: found program 'make'
==> default: configure: inspecting environment
==> default: configure: recreating config.tmp
==> default: configure:
==> default: configure: processing ./configure args
==> default: configure:
==> default: configure: CFG_DISABLE_DOCS     := 1
==> default: configure: CFG_DISABLE_LIBCPP   := 1
==> default: configure: CFG_LOCALSTATEDIR    := /var/lib
==> default: configure: CFG_SYSCONFDIR       := /etc
==> default: configure: CFG_DATADIR          := /share
==> default: configure: CFG_INFODIR          := /share/info
==> default: configure: CFG_LLVM_ROOT        :=
==> default: configure: CFG_PYTHON           :=
==> default: configure: CFG_JEMALLOC_ROOT    :=
==> default: configure: CFG_BUILD            := x86_64-unknown-linux-gnu
==> default: configure: CFG_ANDROID_CROSS_PATH :=
==> default: configure: CFG_I686_LINUX_ANDROID_NDK :=
==> default: configure: CFG_ARM_LINUX_ANDROIDEABI_NDK :=
==> default: configure: CFG_ARMV7_LINUX_ANDROIDEABI_NDK :=
==> default: configure: CFG_AARCH64_LINUX_ANDROID_NDK :=
==> default: configure: CFG_NACL_CROSS_PATH  :=
==> default: configure: CFG_MUSL_ROOT        := /usr/local
==> default: configure: CFG_EXTRA_FILENAME   :=
==> default: configure: CFG_RELEASE_CHANNEL  := dev
==> default: configure: CFG_DEFAULT_LINKER   := cc
==> default: configure: CFG_DEFAULT_AR       := ar
==> default: configure: CFG_LIBDIR           := /usr/local/lib
==> default: configure:
==> default: configure: validating ./configure args
==> default: configure:
==> default: configure:
==> default: configure: looking for build programs
==> default: configure:
==> default: configure: CFG_CURL             := /usr/bin/curl (7.43.0)
==> default: configure: CFG_PYTHON           := /usr/bin/python2.7
==> default: configure: CFG_GIT              := /usr/bin/git (2.5.0)
==> default: configure: CFG_MD5              :=
==> default: configure: CFG_MD5SUM           := /usr/bin/md5sum (8.23)
==> default: configure: CFG_HASH_COMMAND     := /usr/bin/md5sum | cut -c 1-8
==> default: configure: CFG_CLANG            := /usr/bin/clang++ (3.6.2-1)
==> default: configure: CFG_CCACHE           :=
==> default: configure: CFG_GCC              := /usr/bin/gcc (5.2.1-22ubuntu2)
==> default: configure: CFG_LD               := /usr/bin/ld (2.25.1)
==> default: configure: CFG_VALGRIND         :=
==> default: configure: CFG_PERF             :=
==> default: configure: CFG_ISCC             :=
==> default: configure: CFG_ANTLR4           :=
==> default: configure: CFG_GRUN             :=
==> default: configure: CFG_FLEX             :=
==> default: configure: CFG_BISON            :=
==> default: configure: CFG_GDB              :=
==> default: configure: CFG_LLDB             :=
==> default: configure: CFG_CMAKE            := /usr/bin/cmake (3.2.2)
==> default: configure: CFG_DISABLE_VALGRIND_RPASS := 1
==> default: configure: CFG_LLDB_PYTHON      := /usr/bin/python2.7
==> default: configure:
==> default: configure: looking for target specific programs
==> default: configure:
==> default: configure: CFG_ADB              :=
==> default: configure: CFG_ENABLE_CLANG     := 1
==> default: configure: CFG_USING_CLANG      := 1
==> default: configure: CFG_CC               := clang
==> default: configure: CFG_CXX              := clang++
==> default: configure: CFG_STDCPP_NAME      := stdc++
==> default: configure:
==> default: configure: making directories
==> default: configure:
==> default: configure: mkdir -p doc
==> default: configure: mkdir -p doc/std
==> default: configure: mkdir -p doc/extra
==> default: configure: mkdir -p dl
==> default: configure: mkdir -p tmp
==> default: configure: mkdir -p dist
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/llvm
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rustllvm
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/jemalloc
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/compiler-rt
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/isaac
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/sync
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/test
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/arch/i386
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/arch/x86_64
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/arch/arm
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/arch/aarch64
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/arch/mips
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage0/arch/powerpc
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/isaac
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/sync
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/test
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/arch/i386
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/arch/x86_64
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/arch/arm
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/arch/aarch64
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/arch/mips
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage1/arch/powerpc
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/isaac
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/sync
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/test
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/arch/i386
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/arch/x86_64
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/arch/arm
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/arch/aarch64
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/arch/mips
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage2/arch/powerpc
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/isaac
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/sync
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/test
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/arch/i386
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/arch/x86_64
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/arch/arm
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/arch/aarch64
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/arch/mips
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/rt/stage3/arch/powerpc
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage0/bin
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage0/lib
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage0/test
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/bin
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage1/bin
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage1/lib
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage1/test
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/bin
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage2/bin
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage2/lib
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage2/test
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage2/lib/rustlib/x86_64-unknown-linux-gnu/bin
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage2/lib/rustlib/x86_64-unknown-linux-gnu/lib
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage3/bin
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage3/lib
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage3/test
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage3/lib/rustlib/x86_64-unknown-linux-gnu/bin
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/stage3/lib/rustlib/x86_64-unknown-linux-gnu/lib
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/run-pass
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/run-pass-valgrind
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/run-pass-fulldeps
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/run-fail
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/run-fail-fulldeps
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/compile-fail
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/parse-fail
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/compile-fail-fulldeps
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/bench
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/perf
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/pretty
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/debuginfo-gdb
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/debuginfo-lldb
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/codegen
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/codegen-units
==> default: configure: mkdir -p x86_64-unknown-linux-gnu/test/rustdoc
==> default: configure:
==> default: configure: configuring submodules
==> default: configure:
==> default: configure: git: submodule sync
==> default: configure: git: submodule init
==> default: Submodule 'src/compiler-rt' (https://github.com/rust-lang/compiler-rt.git) registered for path 'src/compiler-rt'
==> default: Submodule 'src/jemalloc' (https://github.com/rust-lang/jemalloc.git) registered for path 'src/jemalloc'
==> default: Submodule 'src/liblibc' (https://github.com/rust-lang/libc.git) registered for path 'src/liblibc'
==> default: Submodule 'src/llvm' (https://github.com/rust-lang/llvm.git) registered for path 'src/llvm'
==> default: Submodule 'src/rt/hoedown' (https://github.com/rust-lang/hoedown.git) registered for path 'src/rt/hoedown'
==> default: Submodule 'src/rust-installer' (https://github.com/rust-lang/rust-installer.git) registered for path 'src/rust-installer'
==> default: configure: git: submodule update
==> default: Cloning into 'src/compiler-rt'...
==> default: Submodule path 'src/compiler-rt': checked out '8598065bd965d9713bfafb6c1e766d63a7b17b89'
==> default: Cloning into 'src/jemalloc'...
==> default: Submodule path 'src/jemalloc': checked out 'e058ca661692a8d01f8cf9d35939dfe3105ce968'
==> default: Cloning into 'src/liblibc'...
==> default: Submodule path 'src/liblibc': checked out '49d64cae0699ed9d9ed84810d737a26b0b519da8'
==> default: Cloning into 'src/llvm'...
==> default: Submodule path 'src/llvm': checked out '16b79d01fd6d942cf3c9120b92df56b13ec92665'
==> default: Cloning into 'src/rt/hoedown'...
==> default: Submodule path 'src/rt/hoedown': checked out 'a3736a0a1907cbc8bf619708738815a5fd789c80'
==> default: Cloning into 'src/rust-installer'...
==> default: Submodule path 'src/rust-installer': checked out '755bc3db4ff795865ea31b5b4f38ac920d8acacb'
==> default: configure: git: submodule foreach sync
==> default: Entering 'src/compiler-rt'
==> default: Entering 'src/jemalloc'
==> default: Entering 'src/liblibc'
==> default: Entering 'src/llvm'
==> default: Entering 'src/rt/hoedown'
==> default: Entering 'src/rust-installer'
==> default: configure: git: submodule foreach update
==> default: configure: git: submodule status
==> default:  8598065bd965d9713bfafb6c1e766d63a7b17b89 src/compiler-rt (remotes/origin/rust-llvm-2016-07-18)
==> default:  e058ca661692a8d01f8cf9d35939dfe3105ce968 src/jemalloc (3.6.0-533-ge058ca6)
==> default:  49d64cae0699ed9d9ed84810d737a26b0b519da8 src/liblibc (0.2.15-39-g49d64ca)
==> default:  16b79d01fd6d942cf3c9120b92df56b13ec92665 src/llvm (16b79d0)
==> default:  a3736a0a1907cbc8bf619708738815a5fd789c80 src/rt/hoedown (2.0.0-211-ga3736a0)
==> default:  755bc3db4ff795865ea31b5b4f38ac920d8acacb src/rust-installer (heads/master)
==> default: -aed73472416064642911af790b25d57c9390b6c7 src/rust-installer/test/rust-installer-v1
==> default: -e577c97b494be2815b215e3042207d6d4b7c5516 src/rust-installer/test/rust-installer-v2
==> default: configure: git: submodule clobber
==> default: Entering 'src/compiler-rt'
==> default: Entering 'src/jemalloc'
==> default: Entering 'src/liblibc'
==> default: Entering 'src/llvm'
==> default: Entering 'src/rt/hoedown'
==> default: Entering 'src/rust-installer'
==> default: Entering 'src/compiler-rt'
==> default: Entering 'src/jemalloc'
==> default: Entering 'src/liblibc'
==> default: Entering 'src/llvm'
==> default: Entering 'src/rt/hoedown'
==> default: Entering 'src/rust-installer'
==> default: configure:
==> default: configure: looking at LLVM
==> default: configure:
==> default: configure: CFG_CMAKE_GENERATOR  := Unix Makefiles
==> default: configure: configuring LLVM for x86_64-unknown-linux-gnu
==> default: configure: configuring LLVM for x86_64-unknown-linux-gnu with cmake
==> default: configure: configuring LLVM with:
==> default: configure:  -DLLVM_INCLUDE_TESTS=OFF -DLLVM_INCLUDE_EXAMPLES=OFF -DLLVM_INCLUDE_DOCS=OFF -DLLVM_ENABLE_ZLIB=OFF -DWITH_POLY=OFF -DLLVM_ENABLE_TERMINFO=OFF -DLLVM_ENABLE_LIBEDIT=OFF -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ '-DCMAKE_C_FLAGS=-Qunused-arguments' '-DCMAKE_CXX_FLAGS=-Qunused-arguments' -DCMAKE_BUILD_TYPE=Release -DLLVM_ENABLE_ASSERTIONS=OFF -DLLVM_TARGETS_TO_BUILD='X86;ARM;AArch64;Mips;PowerPC;SystemZ' -G 'Unix Makefiles' /opt/rust/src/llvm/
==> default: CMake Error at CMakeLists.txt:3 (cmake_minimum_required):
==> default:   CMake 3.4.3 or higher is required.  You are running version 3.2.2
==> default: -- Configuring incomplete, errors occurred!
==> default: configure: error: LLVM cmake configure failed
==> default: make: *** No targets specified and no makefile found.  Stop.
==> default: Cloning into 'cargo'...
==> default: configure: looking for configure programs
==> default: configure: found cmp
==> default: configure: found mkdir
==> default: configure: found printf
==> default: configure: found cut
==> default: configure: found head
==> default: configure: found grep
==> default: configure: found xargs
==> default: configure: found cp
==> default: configure: found find
==> default: configure: found uname
==> default: configure: found date
==> default: configure: found tr
==> default: configure: found sed
==> default: configure: found cmake
==> default: configure: found curl
==> default: configure: recreating config.tmp
==> default: configure:
==> default: configure: processing ./configure args
==> default: configure:
==> default: configure: CFG_PREFIX           := /usr/local
==> default: configure: CFG_LOCAL_RUST_ROOT  := ../rust/x86_64-unknown-linux-gnu/st ...
==> default: ./configure: 1: ./configure: ../rust/x86_64-unknown-linux-gnu/stage2//bin/rustc: not found
==> default: configure: error: failed to run rustc at: ../rust/x86_64-unknown-linux-gnu/stage2/
==> default: make: *** No targets specified and no makefile found.  Stop.
==> default: --2016-09-09 07:12:55--  http://lcamtuf.coredump.cx/afl/releases/afl-1.96b.tgz
==> default: Resolving lcamtuf.coredump.cx (lcamtuf.coredump.cx)...
==> default: 199.58.85.40
==> default: Connecting to lcamtuf.coredump.cx (lcamtuf.coredump.cx)|199.58.85.40|:80...
==> default: connected.
==> default: HTTP request sent, awaiting response...
==> default: 200 OK
==> default: Length:
==> default: 804864 (786K) [application/x-gzip]
==> default: Saving to: ‘afl-1.96b.tgz’
==> default:
==> default:      0K
==> default:  ........
==> default: .
==> default: . ...
==> default: ....... ......
==> default: .... ..........
==> default:  ..........  6%  220K 3s
==> default:     50K ..
==> default: ........ ........
==> default: .. ......
==> default: .... ....
==> default: ..
==> default: ....
==> default:  ........
==> default: ..
==> default:  12%
==> default:   433K 2s
==> default:    100K ........
==> default: .. .......... ..
==> default: ..
==> default: ....
==> default: .. ........
==> default: .. ...
==> default: ...
==> default: .... 19% 11.6M 1s
==> default:    150K ...
==> default: ....... ..........
==> default:  ...
==> default: .
==> default: ...... .
==> default: ....
==> default: ....
==> default: . ......
==> default: .... 25%  436K 1s
==> default:    200K ....
==> default: ...... ..
==> default: ........
==> default:  ...
==> default: ...
==> default: .... .......... ..
==> default: ........ 31% 17.1M 1s
==> default:
==> default:    250K ........
==> default: .. .........
==> default: .
==> default:
==> default: .....
==> default: ....
==> default: . .
==> default: .....
==> default: .... ....
==> default: ...... 38%  456K 1s
==> default:
==> default:    300K ........
==> default: ..
==> default:  .......
==> default: .
==> default: .. .....
==> default: .
==> default: .
==> default: ... ...
==> default: ....... .
==> default: ........
==> default: . 44% 8.75M 1s
==> default:    350K .......
==> default: .
==> default: .. .....
==> default: .
==> default: .... ...
==> default: .
==> default: ...... .
==> default: ........
==> default: . ......
==> default: .
==> default: ... 50% 14.0M 1s
==> default:    400K .....
==> default: ...
==> default: .. ....
==> default: ...... ..
==> default: ....
==> default: .... ....
==> default: .
==> default: .
==> default: .... ....
==> default: ...... 57% 1.47M 0s
==> default:    450K ..
==> default: ...
==> default: ..... .......
==> default: ... ..
==> default: .....
==> default: ... ....
==> default: ...... .
==> default: ......
==> default: .
==> default: ..
==> default:  63%
==> default:   663K 0s
==> default:    500K ......
==> default: .
==> default: .
==> default: .. ....
==> default: ...... ..
==> default: ........
==> default:  .......... ......
==> default: .... 69% 7.95M 0s
==> default:    550K ....
==> default: ...... ..........
==> default:  ...
==> default: ....... .
==> default: ........
==> default: . .......
==> default: ...
==> default:  76% 6.49M 0s
==> default:    600K .....
==> default: ..... ...
==> default: ....... .
==> default: ........
==> default: . .......
==> default: ... .......... 82% 52.3M 0s
==> default:    650K ...
==> default: ....... .
==> default: .
==> default: .
==> default: .......
==> default:
==> default: .....
==> default: ...
==> default: .. ......
==> default: .... ....
==> default: ...... 89% 1.74M 0s
==> default:    700K
==> default:  ..
==> default: ........
==> default:  ........
==> default: .. ......
==> default: .... ....
==> default: ...... ..
==> default: ........ 95%
==> default:  12.2M 0s
==> default:
==> default:    750K ...
==> default: .....
==> default: .. ......
==> default: .... ....
==> default: ...... ...
==> default: ...               100% 21.4M
==> default: =0.7s
==> default: 2016-09-09 07:12:56 (1.04 MB/s) - ‘afl-1.96b.tgz’ saved [804864/804864]
==> default: [*] Checking for the ability to compile x86 code...
==> default: [+] Everything seems to be working, ready to compile.
==> default: cc -O3 -funroll-loops -Wall -D_FORTIFY_SOURCE=2 -g -Wno-pointer-sign -DAFL_PATH=\"/usr/local/lib/afl\" -DDOC_PATH=\"/usr/local/share/doc/afl\" -DBIN_PATH=\"/usr/local/bin\" -DVERSION=\"1.96b\" afl-gcc.c -o afl-gcc -ldl
==> default: set -e; for i in afl-g++ afl-clang afl-clang++; do ln -sf afl-gcc $i; done
==> default: cc -O3 -funroll-loops -Wall -D_FORTIFY_SOURCE=2 -g -Wno-pointer-sign -DAFL_PATH=\"/usr/local/lib/afl\" -DDOC_PATH=\"/usr/local/share/doc/afl\" -DBIN_PATH=\"/usr/local/bin\" -DVERSION=\"1.96b\" afl-as.c -o afl-as -ldl
==> default: ln -sf afl-as as
==> default: cc -O3 -funroll-loops -Wall -D_FORTIFY_SOURCE=2 -g -Wno-pointer-sign -DAFL_PATH=\"/usr/local/lib/afl\" -DDOC_PATH=\"/usr/local/share/doc/afl\" -DBIN_PATH=\"/usr/local/bin\" -DVERSION=\"1.96b\" afl-fuzz.c -o afl-fuzz -ldl
==> default: cc -O3 -funroll-loops -Wall -D_FORTIFY_SOURCE=2 -g -Wno-pointer-sign -DAFL_PATH=\"/usr/local/lib/afl\" -DDOC_PATH=\"/usr/local/share/doc/afl\" -DBIN_PATH=\"/usr/local/bin\" -DVERSION=\"1.96b\" afl-showmap.c -o afl-showmap -ldl
==> default: cc -O3 -funroll-loops -Wall -D_FORTIFY_SOURCE=2 -g -Wno-pointer-sign -DAFL_PATH=\"/usr/local/lib/afl\" -DDOC_PATH=\"/usr/local/share/doc/afl\" -DBIN_PATH=\"/usr/local/bin\" -DVERSION=\"1.96b\" afl-tmin.c -o afl-tmin -ldl
==> default: cc -O3 -funroll-loops -Wall -D_FORTIFY_SOURCE=2 -g -Wno-pointer-sign -DAFL_PATH=\"/usr/local/lib/afl\" -DDOC_PATH=\"/usr/local/share/doc/afl\" -DBIN_PATH=\"/usr/local/bin\" -DVERSION=\"1.96b\" afl-gotcpu.c -o afl-gotcpu -ldl
==> default: [*] Testing the CC wrapper and instrumentation output...
==> default: unset AFL_USE_ASAN AFL_USE_MSAN; AFL_QUIET=1 AFL_INST_RATIO=100 AFL_PATH=. ./afl-gcc -O3 -funroll-loops -Wall -D_FORTIFY_SOURCE=2 -g -Wno-pointer-sign -DAFL_PATH=\"/usr/local/lib/afl\" -DDOC_PATH=\"/usr/local/share/doc/afl\" -DBIN_PATH=\"/usr/local/bin\" -DVERSION=\"1.96b\" test-instr.c -o test-instr -ldl
==> default: echo 0 | ./afl-showmap -m none -q -o .test-instr0 ./test-instr
==> default: echo 1 | ./afl-showmap -m none -q -o .test-instr1 ./test-instr
==> default: [+] All right, the instrumentation seems to be working!
==> default: [+] All done! Be sure to review README - it's pretty short and useful.
==> default: [*] Checking for the ability to compile x86 code...
==> default: [+] Everything seems to be working, ready to compile.
==> default: [*] Testing the CC wrapper and instrumentation output...
==> default: unset AFL_USE_ASAN AFL_USE_MSAN; AFL_QUIET=1 AFL_INST_RATIO=100 AFL_PATH=. ./afl-gcc -O3 -funroll-loops -Wall -D_FORTIFY_SOURCE=2 -g -Wno-pointer-sign -DAFL_PATH=\"/usr/local/lib/afl\" -DDOC_PATH=\"/usr/local/share/doc/afl\" -DBIN_PATH=\"/usr/local/bin\" -DVERSION=\"1.96b\" test-instr.c -o test-instr -ldl
==> default: echo 0 | ./afl-showmap -m none -q -o .test-instr0 ./test-instr
==> default: echo 1 | ./afl-showmap -m none -q -o .test-instr1 ./test-instr
==> default: [+] All right, the instrumentation seems to be working!
==> default: [+] All done! Be sure to review README - it's pretty short and useful.
==> default: mkdir -p -m 755 ${DESTDIR}/usr/local/bin ${DESTDIR}/usr/local/lib/afl ${DESTDIR}/usr/local/share/doc/afl ${DESTDIR}/usr/local/share/afl
==> default: rm -f ${DESTDIR}/usr/local/bin/afl-plot.sh
==> default: install -m 755 afl-gcc afl-fuzz afl-showmap afl-plot afl-tmin afl-cmin afl-gotcpu afl-whatsup ${DESTDIR}/usr/local/bin
==> default: if [ -f afl-qemu-trace ]; then install -m 755 afl-qemu-trace ${DESTDIR}/usr/local/bin; fi
==> default: if [ -f afl-clang-fast -a -f afl-llvm-pass.so -a -f afl-llvm-rt.o ]; then set -e; install -m 755 afl-clang-fast ${DESTDIR}/usr/local/bin; ln -sf afl-clang-fast ${DESTDIR}/usr/local/bin/afl-clang-fast++; install -m 755 afl-llvm-pass.so afl-llvm-rt.o ${DESTDIR}/usr/local/lib/afl; fi
==> default: set -e; for i in afl-g++ afl-clang afl-clang++; do ln -sf afl-gcc ${DESTDIR}/usr/local/bin/$i; done
==> default: install -m 755 afl-as ${DESTDIR}/usr/local/lib/afl
==> default: ln -sf afl-as ${DESTDIR}/usr/local/lib/afl/as
==> default: install -m 644 docs/README docs/ChangeLog docs/*.txt ${DESTDIR}/usr/local/share/doc/afl
==> default: cp -r testcases/ ${DESTDIR}/usr/local/share/afl
manuel@schoellingm:~/tmp/afl.rs-master/vagrant$ vagrant ssh
Welcome to Ubuntu 15.10 (GNU/Linux 4.2.0-42-generic x86_64)

 * Documentation:  https://help.ubuntu.com/

  Get cloud support with Ubuntu Advantage Cloud Guest:
    http://www.ubuntu.com/business/services/cloud

New release '16.04.1 LTS' available.
Run 'do-release-upgrade' to upgrade to it.